! Started logfile: J0005-3445_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:25 2019 obs J0005-3445_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0005-3445_S_2017_01_21_pus_uva.fits ! AN table 1: 47 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.574468 visibilities/baseline/integration-bin. ! Found source: J0005-3445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 3888 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0005-3445_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 116 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006107Jy sigma=0.004931 ! Fit after self-cal, rms=0.913812Jy sigma=0.004557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.201 mas, bmaj=6.099 mas, bpa=-2.931 degrees ! Estimated noise=3654.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0778838 Jy ! Component: 100 - total flux cleaned = 0.0954128 Jy ! Total flux subtracted in 100 components = 0.0954128 Jy ! Clean residual min=-0.011462 max=0.011628 Jy/beam ! Clean residual mean=0.000028 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 0.0954128 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0954128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158880Jy sigma=0.000623 ! Fit after self-cal, rms=0.158262Jy sigma=0.000621 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.529 mas, bmaj=6.832 mas, bpa=-3.709 degrees ! Estimated noise=2646.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557223 Jy ! Component: 100 - total flux cleaned = 0.00821087 Jy ! Component: 150 - total flux cleaned = 0.00949029 Jy ! Component: 200 - total flux cleaned = 0.00967595 Jy ! Total flux subtracted in 200 components = 0.00967595 Jy ! Clean residual min=-0.006644 max=0.006379 Jy/beam ! Clean residual mean=0.000094 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.105089 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.105089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157969Jy sigma=0.000621 ! Fit after self-cal, rms=0.157872Jy sigma=0.000620 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00* LA 1.22 ! MK 1.04 NL 1.05 OV 0.82 PT 1.06 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.00* LA 0.95 ! MK 1.19 NL 1.00 OV 1.11 PT 1.12 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00* LA 1.08 ! MK 1.05 NL 1.06 OV 0.90 PT 1.05 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.00* HN 1.00* LA 0.88 ! MK 0.88 NL 1.00* OV 0.78 PT 0.92 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.157872Jy sigma=0.000620 ! Fit after self-cal, rms=0.149242Jy sigma=0.000616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=6.851 mas, bpa=-3.464 degrees ! Estimated noise=2665.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.60675e-05 Jy ! Component: 100 - total flux cleaned = -4.4898e-05 Jy ! Component: 150 - total flux cleaned = -9.21553e-05 Jy ! Component: 200 - total flux cleaned = -9.26518e-05 Jy ! Total flux subtracted in 200 components = -9.26518e-05 Jy ! Clean residual min=-0.005965 max=0.005959 Jy/beam ! Clean residual mean=-0.000015 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.104996 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.104996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149233Jy sigma=0.000616 ! Fit after self-cal, rms=0.148738Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148738Jy sigma=0.000615 ! Fit after self-cal, rms=0.147100Jy sigma=0.000615 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.852 mas, bpa=-3.221 degrees ! Estimated noise=2660.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.57464e-05 Jy ! Component: 100 - total flux cleaned = -3.28804e-05 Jy ! Component: 150 - total flux cleaned = -3.13728e-05 Jy ! Component: 200 - total flux cleaned = -3.12009e-05 Jy ! Total flux subtracted in 200 components = -3.12009e-05 Jy ! Clean residual min=-0.005886 max=0.005563 Jy/beam ! Clean residual mean=-0.000019 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.104965 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.104965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147093Jy sigma=0.000615 ! Fit after self-cal, rms=0.146982Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018262 Jy ! Component: 100 - total flux cleaned = 0.000179249 Jy ! Component: 150 - total flux cleaned = 0.000166172 Jy ! Component: 200 - total flux cleaned = 0.000144277 Jy ! Total flux subtracted in 200 components = 0.000144277 Jy ! Clean residual min=-0.005783 max=0.005511 Jy/beam ! Clean residual mean=-0.000012 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.105109 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.105109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146977Jy sigma=0.000615 ! Fit after self-cal, rms=0.146967Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146967Jy sigma=0.000615 ! Fit after self-cal, rms=0.146747Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.585 mas, bmaj=6.852 mas, bpa=-3.137 degrees ! Estimated noise=2662.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.08999e-05 Jy ! Component: 100 - total flux cleaned = -4.01434e-05 Jy ! Component: 150 - total flux cleaned = -3.98011e-05 Jy ! Component: 200 - total flux cleaned = -4.01754e-05 Jy ! Total flux subtracted in 200 components = -4.01754e-05 Jy ! Clean residual min=-0.005823 max=0.005452 Jy/beam ! Clean residual mean=-0.000022 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.105069 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.105069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146742Jy sigma=0.000615 ! Fit after self-cal, rms=0.146701Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.49893e-05 Jy ! Component: 100 - total flux cleaned = 3.40297e-05 Jy ! Component: 150 - total flux cleaned = 2.26539e-05 Jy ! Component: 200 - total flux cleaned = 1.33421e-05 Jy ! Total flux subtracted in 200 components = 1.33421e-05 Jy ! Clean residual min=-0.005774 max=0.005447 Jy/beam ! Clean residual mean=-0.000019 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.105082 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.105082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146697Jy sigma=0.000615 ! Fit after self-cal, rms=0.146691Jy sigma=0.000615 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146691Jy sigma=0.000615 ! Fit after self-cal, rms=0.146668Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.677 mas, bmaj=21.68 mas, bpa=2.848 degrees ! Estimated noise=3886.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000300551 Jy ! Component: 100 - total flux cleaned = -0.00030226 Jy ! Component: 150 - total flux cleaned = -0.000303116 Jy ! Component: 200 - total flux cleaned = -0.00030372 Jy ! Total flux subtracted in 200 components = -0.00030372 Jy ! Clean residual min=-0.004820 max=0.004898 Jy/beam ! Clean residual mean=-0.000062 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.104779 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 41 components and 0.104779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146665Jy sigma=0.000615 ! Fit after self-cal, rms=0.146643Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.27377e-05 Jy ! Component: 100 - total flux cleaned = -3.25269e-05 Jy ! Component: 150 - total flux cleaned = -3.28123e-05 Jy ! Component: 200 - total flux cleaned = -3.31086e-05 Jy ! Total flux subtracted in 200 components = -3.31086e-05 Jy ! Clean residual min=-0.004827 max=0.004932 Jy/beam ! Clean residual mean=-0.000060 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.104746 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 42 components and 0.104746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146641Jy sigma=0.000615 ! Fit after self-cal, rms=0.146631Jy sigma=0.000615 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.853 mas, bpa=-3.062 degrees ! Estimated noise=2665.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.853 at -3.062 degrees (North through East) ! Clean map min=-0.0053867 max=0.097326 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.26 mas, bmaj=6.132 mas, bpa=-2.211 degrees ! Estimated noise=3669.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0785678 Jy ! Component: 100 - total flux cleaned = 0.0968445 Jy ! Component: 150 - total flux cleaned = 0.101382 Jy ! Component: 200 - total flux cleaned = 0.101897 Jy ! Total flux subtracted in 200 components = 0.101897 Jy ! Clean residual min=-0.010059 max=0.010642 Jy/beam ! Clean residual mean=-0.000017 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.101897 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.101897 Jy ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.853 mas, bpa=-3.062 degrees ! Estimated noise=2665.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018101 Jy ! Component: 100 - total flux cleaned = 0.00213276 Jy ! Component: 150 - total flux cleaned = 0.00240835 Jy ! Component: 200 - total flux cleaned = 0.00262205 Jy ! Total flux subtracted in 200 components = 0.00262205 Jy ! Clean residual min=-0.006016 max=0.005380 Jy/beam ! Clean residual mean=-0.000025 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.104519 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.104519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.677 mas, bmaj=21.68 mas, bpa=2.848 degrees ! Estimated noise=3886.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173338 Jy ! Component: 100 - total flux cleaned = 0.000170072 Jy ! Component: 150 - total flux cleaned = 0.000168225 Jy ! Component: 200 - total flux cleaned = 0.000166954 Jy ! Total flux subtracted in 200 components = 0.000166954 Jy ! Clean residual min=-0.004986 max=0.004898 Jy/beam ! Clean residual mean=-0.000060 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.104686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.61231e-07 Jy ! Component: 100 - total flux cleaned = -1.71596e-06 Jy ! Component: 150 - total flux cleaned = -2.30689e-06 Jy ! Component: 200 - total flux cleaned = -4.08573e-06 Jy ! Total flux subtracted in 200 components = -4.08573e-06 Jy ! Clean residual min=-0.004863 max=0.004908 Jy/beam ! Clean residual mean=-0.000060 rms=0.001624 Jy/beam ! Combined flux in latest and established models = 0.104682 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.104682 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=6.853 mas, bpa=-3.062 degrees ! Estimated noise=2665.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190339 Jy ! Component: 100 - total flux cleaned = 0.000233795 Jy ! Component: 150 - total flux cleaned = 0.000360135 Jy ! Component: 200 - total flux cleaned = 0.000386394 Jy ! Total flux subtracted in 200 components = 0.000386394 Jy ! Clean residual min=-0.005936 max=0.005430 Jy/beam ! Clean residual mean=-0.000021 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 0.105068 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.105068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146652Jy sigma=0.000615 ! Fit after self-cal, rms=0.146680Jy sigma=0.000615 wmodel J0005-3445_S_2017_01_21_pus_map.mod ! Writing 38 model components to file: J0005-3445_S_2017_01_21_pus_map.mod wobs J0005-3445_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0005-3445_S_2017_01_21_pus_uvs.fits wwins J0005-3445_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0005-3445_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106723 Jy ! Component: 100 - total flux cleaned = -0.000896621 Jy ! Component: 150 - total flux cleaned = -0.000664397 Jy ! Component: 200 - total flux cleaned = -8.65567e-05 Jy ! Component: 250 - total flux cleaned = 0.000325286 Jy ! Component: 300 - total flux cleaned = 0.000715549 Jy ! Component: 350 - total flux cleaned = 0.00126724 Jy ! Component: 400 - total flux cleaned = 0.00173582 Jy ! Component: 450 - total flux cleaned = 0.00218302 Jy ! Component: 500 - total flux cleaned = 0.00255728 Jy ! Component: 550 - total flux cleaned = 0.0027612 Jy ! Component: 600 - total flux cleaned = 0.00281045 Jy ! Component: 650 - total flux cleaned = 0.00295335 Jy ! Component: 700 - total flux cleaned = 0.00309047 Jy ! Component: 750 - total flux cleaned = 0.00313549 Jy ! Component: 800 - total flux cleaned = 0.00326615 Jy ! Component: 850 - total flux cleaned = 0.0032662 Jy ! Component: 900 - total flux cleaned = 0.00326625 Jy ! Component: 950 - total flux cleaned = 0.00330764 Jy ! Component: 1000 - total flux cleaned = 0.00322688 Jy ! Component: 1050 - total flux cleaned = 0.00314884 Jy ! Component: 1100 - total flux cleaned = 0.00322627 Jy ! Component: 1150 - total flux cleaned = 0.00315051 Jy ! Component: 1200 - total flux cleaned = 0.00318771 Jy ! Component: 1250 - total flux cleaned = 0.00315136 Jy ! Component: 1300 - total flux cleaned = 0.00322319 Jy ! Component: 1350 - total flux cleaned = 0.00315181 Jy ! Component: 1400 - total flux cleaned = 0.00315207 Jy ! Component: 1450 - total flux cleaned = 0.00318632 Jy ! Component: 1500 - total flux cleaned = 0.00318627 Jy ! Component: 1550 - total flux cleaned = 0.00311927 Jy ! Component: 1600 - total flux cleaned = 0.00318564 Jy ! Component: 1650 - total flux cleaned = 0.00311968 Jy ! Component: 1700 - total flux cleaned = 0.00318464 Jy ! Component: 1750 - total flux cleaned = 0.00318464 Jy ! Component: 1800 - total flux cleaned = 0.00328078 Jy ! Component: 1850 - total flux cleaned = 0.00334425 Jy ! Component: 1900 - total flux cleaned = 0.00334424 Jy ! Component: 1950 - total flux cleaned = 0.00334428 Jy ! Component: 2000 - total flux cleaned = 0.00331316 Jy ! Component: 2050 - total flux cleaned = 0.00337558 Jy ! Component: 2100 - total flux cleaned = 0.00331306 Jy ! Component: 2150 - total flux cleaned = 0.0033438 Jy ! Component: 2200 - total flux cleaned = 0.0032503 Jy ! Component: 2250 - total flux cleaned = 0.00315682 Jy ! Component: 2300 - total flux cleaned = 0.00312555 Jy ! Component: 2350 - total flux cleaned = 0.00303221 Jy ! Component: 2400 - total flux cleaned = 0.0029698 Jy ! Component: 2450 - total flux cleaned = 0.00293835 Jy ! Component: 2500 - total flux cleaned = 0.00281368 Jy ! Component: 2550 - total flux cleaned = 0.00271985 Jy ! Component: 2600 - total flux cleaned = 0.00256324 Jy ! Component: 2650 - total flux cleaned = 0.00243747 Jy ! Component: 2700 - total flux cleaned = 0.00231113 Jy ! Component: 2750 - total flux cleaned = 0.00221592 Jy ! Component: 2800 - total flux cleaned = 0.00212005 Jy ! Component: 2850 - total flux cleaned = 0.00202333 Jy ! Component: 2900 - total flux cleaned = 0.00199086 Jy ! Component: 2950 - total flux cleaned = 0.00192512 Jy ! Component: 3000 - total flux cleaned = 0.00182599 Jy ! Component: 3050 - total flux cleaned = 0.0017593 Jy ! Component: 3100 - total flux cleaned = 0.00169209 Jy ! Component: 3150 - total flux cleaned = 0.00159054 Jy ! Component: 3200 - total flux cleaned = 0.00152257 Jy ! Component: 3250 - total flux cleaned = 0.00141879 Jy ! Component: 3300 - total flux cleaned = 0.00131368 Jy ! Component: 3350 - total flux cleaned = 0.00127826 Jy ! Component: 3400 - total flux cleaned = 0.00124201 Jy ! Component: 3450 - total flux cleaned = 0.00124183 Jy ! Component: 3500 - total flux cleaned = 0.00124195 Jy ! Component: 3550 - total flux cleaned = 0.00124221 Jy ! Component: 3600 - total flux cleaned = 0.00124213 Jy ! Component: 3650 - total flux cleaned = 0.00120373 Jy ! Component: 3700 - total flux cleaned = 0.00112504 Jy ! Component: 3750 - total flux cleaned = 0.00112482 Jy ! Component: 3800 - total flux cleaned = 0.00104391 Jy ! Component: 3850 - total flux cleaned = 0.00104333 Jy ! Component: 3900 - total flux cleaned = 0.00100131 Jy ! Component: 3950 - total flux cleaned = 0.00100107 Jy ! Component: 4000 - total flux cleaned = 0.000914267 Jy ! Component: 4050 - total flux cleaned = 0.000914706 Jy ! Total flux subtracted in 4096 components = 0.000914968 Jy ! Clean residual min=-0.002826 max=0.002549 Jy/beam ! Clean residual mean=0.000032 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.105983 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 278 components and 0.105983 Jy ![Exited script file: muppet] wmap "J0005-3445_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.853 at -3.062 degrees (North through East) ! Clean map min=-0.0060533 max=0.096712 Jy/beam ! Writing clean map to FITS file: J0005-3445_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0967124 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000767069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.37943 2.37943 4.75887 9.51773 19.0355 38.0709 76.1419 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.587 x 6.853 at -3.062 degrees (North through East) ! Clean map min=-0.0060533 max=0.096712 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0005-3445_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:29 2019