! Started logfile: J0005-3445_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:00:51 2019 obs J0005-3445_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0005-3445_S_2017_01_16_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.634742 visibilities/baseline/integration-bin. ! Found source: J0005-3445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 16224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0005-3445_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 297 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 309 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 297 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 484 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002782Jy sigma=0.005351 ! Fit after self-cal, rms=0.940621Jy sigma=0.005107 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=10.87 mas, bpa=14.8 degrees ! Estimated noise=1871.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680195 Jy ! Component: 100 - total flux cleaned = 0.0829554 Jy ! Total flux subtracted in 100 components = 0.0829554 Jy ! Clean residual min=-0.004979 max=0.005189 Jy/beam ! Clean residual mean=-0.000012 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.0829554 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0829554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250722Jy sigma=0.000645 ! Fit after self-cal, rms=0.250433Jy sigma=0.000643 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.935 mas, bmaj=14.04 mas, bpa=11.71 degrees ! Estimated noise=1088.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487858 Jy ! Component: 100 - total flux cleaned = 0.00698364 Jy ! Component: 150 - total flux cleaned = 0.00795135 Jy ! Component: 200 - total flux cleaned = 0.00806546 Jy ! Total flux subtracted in 200 components = 0.00806546 Jy ! Clean residual min=-0.003099 max=0.003184 Jy/beam ! Clean residual mean=-0.000024 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0910208 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0910208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250214Jy sigma=0.000642 ! Fit after self-cal, rms=0.250279Jy sigma=0.000642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.01 KP 0.99 ! LA 1.01 MK 1.00* NL 1.00 OV 1.02 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.10 KP 0.97 ! LA 0.99 MK 1.00* NL 1.03 OV 1.02 ! PT 0.94 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.04 HN 1.09 KP 1.03 ! LA 1.04 MK 1.00* NL 0.94 OV 1.02 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.03 HN 0.95 KP 0.94 ! LA 0.99 MK 1.00* NL 1.00* OV 0.93 ! PT 1.01 SC 0.79 ! ! ! Fit before self-cal, rms=0.250279Jy sigma=0.000642 ! Fit after self-cal, rms=0.222172Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=14.06 mas, bpa=11.8 degrees ! Estimated noise=1092.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101058 Jy ! Component: 100 - total flux cleaned = 0.00103492 Jy ! Component: 150 - total flux cleaned = 0.00103591 Jy ! Component: 200 - total flux cleaned = 0.00101782 Jy ! Total flux subtracted in 200 components = 0.00101782 Jy ! Clean residual min=-0.003039 max=0.002933 Jy/beam ! Clean residual mean=-0.000026 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0920387 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0920387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222153Jy sigma=0.000642 ! Fit after self-cal, rms=0.222055Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222055Jy sigma=0.000642 ! Fit after self-cal, rms=0.238289Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=13.99 mas, bpa=11.98 degrees ! Estimated noise=1099.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000839168 Jy ! Component: 100 - total flux cleaned = 0.00102818 Jy ! Component: 150 - total flux cleaned = 0.00109865 Jy ! Component: 200 - total flux cleaned = 0.00114584 Jy ! Total flux subtracted in 200 components = 0.00114584 Jy ! Clean residual min=-0.002727 max=0.002554 Jy/beam ! Clean residual mean=-0.000030 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.0931845 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.0931845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238266Jy sigma=0.000641 ! Fit after self-cal, rms=0.238309Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.86781e-05 Jy ! Component: 100 - total flux cleaned = 3.88324e-05 Jy ! Component: 150 - total flux cleaned = 4.99468e-05 Jy ! Component: 200 - total flux cleaned = 5.96158e-05 Jy ! Total flux subtracted in 200 components = 5.96158e-05 Jy ! Clean residual min=-0.002705 max=0.002562 Jy/beam ! Clean residual mean=-0.000027 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0932441 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.0932441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238306Jy sigma=0.000640 ! Fit after self-cal, rms=0.238309Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238309Jy sigma=0.000640 ! Fit after self-cal, rms=0.134797Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=13.98 mas, bpa=11.99 degrees ! Estimated noise=1098.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.869e-05 Jy ! Component: 100 - total flux cleaned = 4.45926e-05 Jy ! Component: 150 - total flux cleaned = 3.41707e-05 Jy ! Component: 200 - total flux cleaned = 2.4784e-05 Jy ! Total flux subtracted in 200 components = 2.4784e-05 Jy ! Clean residual min=-0.002550 max=0.002270 Jy/beam ! Clean residual mean=-0.000029 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0932689 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0932689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134795Jy sigma=0.000640 ! Fit after self-cal, rms=0.134759Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.62243e-06 Jy ! Component: 100 - total flux cleaned = -4.62578e-06 Jy ! Component: 150 - total flux cleaned = -5.01157e-06 Jy ! Component: 200 - total flux cleaned = -1.35434e-05 Jy ! Total flux subtracted in 200 components = -1.35434e-05 Jy ! Clean residual min=-0.002462 max=0.002371 Jy/beam ! Clean residual mean=-0.000027 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0932553 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.0932553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134757Jy sigma=0.000639 ! Fit after self-cal, rms=0.134759Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134759Jy sigma=0.000639 ! Fit after self-cal, rms=0.134580Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.405 mas, bmaj=24.49 mas, bpa=3.016 degrees ! Estimated noise=1275.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112506 Jy ! Component: 100 - total flux cleaned = 0.000136481 Jy ! Component: 150 - total flux cleaned = 0.000158518 Jy ! Component: 200 - total flux cleaned = 0.000171034 Jy ! Total flux subtracted in 200 components = 0.000171034 Jy ! Clean residual min=-0.002712 max=0.002298 Jy/beam ! Clean residual mean=-0.000046 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0934264 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.0934264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134581Jy sigma=0.000639 ! Fit after self-cal, rms=0.134587Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18965e-06 Jy ! Component: 100 - total flux cleaned = 8.39163e-06 Jy ! Component: 150 - total flux cleaned = 1.56721e-05 Jy ! Component: 200 - total flux cleaned = 1.55594e-05 Jy ! Total flux subtracted in 200 components = 1.55594e-05 Jy ! Clean residual min=-0.002708 max=0.002294 Jy/beam ! Clean residual mean=-0.000046 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.0934419 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 0.0934419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134589Jy sigma=0.000639 ! Fit after self-cal, rms=0.134592Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=13.97 mas, bpa=12 degrees ! Estimated noise=1098.16 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.893 x 13.97 at 12 degrees (North through East) ! Clean map min=-0.0023972 max=0.086716 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.057 mas, bmaj=10.87 mas, bpa=14.87 degrees ! Estimated noise=1858.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0677611 Jy ! Component: 100 - total flux cleaned = 0.0831222 Jy ! Component: 150 - total flux cleaned = 0.0891131 Jy ! Component: 200 - total flux cleaned = 0.0911093 Jy ! Total flux subtracted in 200 components = 0.0911093 Jy ! Clean residual min=-0.004397 max=0.004484 Jy/beam ! Clean residual mean=-0.000020 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.0911093 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0911093 Jy ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=13.97 mas, bpa=12 degrees ! Estimated noise=1098.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014734 Jy ! Component: 100 - total flux cleaned = 0.00193312 Jy ! Component: 150 - total flux cleaned = 0.00196895 Jy ! Component: 200 - total flux cleaned = 0.00200212 Jy ! Total flux subtracted in 200 components = 0.00200212 Jy ! Clean residual min=-0.002505 max=0.002356 Jy/beam ! Clean residual mean=-0.000027 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0931114 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0931114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.405 mas, bmaj=24.49 mas, bpa=3.016 degrees ! Estimated noise=1275.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367717 Jy ! Component: 100 - total flux cleaned = 0.000368485 Jy ! Component: 150 - total flux cleaned = 0.000368082 Jy ! Component: 200 - total flux cleaned = 0.000383448 Jy ! Total flux subtracted in 200 components = 0.000383448 Jy ! Clean residual min=-0.002698 max=0.002299 Jy/beam ! Clean residual mean=-0.000046 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0934949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.27432e-06 Jy ! Component: 100 - total flux cleaned = 1.43754e-05 Jy ! Component: 150 - total flux cleaned = 2.10843e-05 Jy ! Component: 200 - total flux cleaned = 2.13522e-05 Jy ! Total flux subtracted in 200 components = 2.13522e-05 Jy ! Clean residual min=-0.002702 max=0.002291 Jy/beam ! Clean residual mean=-0.000045 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0935162 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0935162 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=13.97 mas, bpa=12 degrees ! Estimated noise=1098.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000213933 Jy ! Component: 100 - total flux cleaned = -0.000256527 Jy ! Component: 150 - total flux cleaned = -0.000269836 Jy ! Component: 200 - total flux cleaned = -0.000281061 Jy ! Total flux subtracted in 200 components = -0.000281061 Jy ! Clean residual min=-0.002485 max=0.002361 Jy/beam ! Clean residual mean=-0.000027 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.0932352 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0932352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134591Jy sigma=0.000639 ! Fit after self-cal, rms=0.134588Jy sigma=0.000639 wmodel J0005-3445_S_2017_01_16_pus_map.mod ! Writing 40 model components to file: J0005-3445_S_2017_01_16_pus_map.mod wobs J0005-3445_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0005-3445_S_2017_01_16_pus_uvs.fits wwins J0005-3445_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0005-3445_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073337 Jy ! Component: 100 - total flux cleaned = -0.000949035 Jy ! Component: 150 - total flux cleaned = -0.00103048 Jy ! Component: 200 - total flux cleaned = -0.00103095 Jy ! Component: 250 - total flux cleaned = -0.00103136 Jy ! Component: 300 - total flux cleaned = -0.00117839 Jy ! Component: 350 - total flux cleaned = -0.00128394 Jy ! Component: 400 - total flux cleaned = -0.00124826 Jy ! Component: 450 - total flux cleaned = -0.00141883 Jy ! Component: 500 - total flux cleaned = -0.00158528 Jy ! Component: 550 - total flux cleaned = -0.00178035 Jy ! Component: 600 - total flux cleaned = -0.00184373 Jy ! Component: 650 - total flux cleaned = -0.0019695 Jy ! Component: 700 - total flux cleaned = -0.00215442 Jy ! Component: 750 - total flux cleaned = -0.00215463 Jy ! Component: 800 - total flux cleaned = -0.00224463 Jy ! Component: 850 - total flux cleaned = -0.00242047 Jy ! Component: 900 - total flux cleaned = -0.0025925 Jy ! Component: 950 - total flux cleaned = -0.00270576 Jy ! Component: 1000 - total flux cleaned = -0.00290128 Jy ! Component: 1050 - total flux cleaned = -0.00301203 Jy ! Component: 1100 - total flux cleaned = -0.00323011 Jy ! Component: 1150 - total flux cleaned = -0.0033644 Jy ! Component: 1200 - total flux cleaned = -0.00352341 Jy ! Component: 1250 - total flux cleaned = -0.00365452 Jy ! Component: 1300 - total flux cleaned = -0.00386065 Jy ! Component: 1350 - total flux cleaned = -0.00398806 Jy ! Component: 1400 - total flux cleaned = -0.00418892 Jy ! Component: 1450 - total flux cleaned = -0.00436278 Jy ! Component: 1500 - total flux cleaned = -0.00458372 Jy ! Component: 1550 - total flux cleaned = -0.00470469 Jy ! Component: 1600 - total flux cleaned = -0.00480082 Jy ! Component: 1650 - total flux cleaned = -0.00487186 Jy ! Component: 1700 - total flux cleaned = -0.00498904 Jy ! Component: 1750 - total flux cleaned = -0.00505832 Jy ! Component: 1800 - total flux cleaned = -0.00512693 Jy ! Component: 1850 - total flux cleaned = -0.0051948 Jy ! Component: 1900 - total flux cleaned = -0.00526195 Jy ! Component: 1950 - total flux cleaned = -0.00526191 Jy ! Component: 2000 - total flux cleaned = -0.00534949 Jy ! Component: 2050 - total flux cleaned = -0.00541479 Jy ! Component: 2100 - total flux cleaned = -0.00545772 Jy ! Component: 2150 - total flux cleaned = -0.00556436 Jy ! Component: 2200 - total flux cleaned = -0.00564842 Jy ! Component: 2250 - total flux cleaned = -0.00566926 Jy ! Component: 2300 - total flux cleaned = -0.00569015 Jy ! Component: 2350 - total flux cleaned = -0.00569025 Jy ! Component: 2400 - total flux cleaned = -0.00573102 Jy ! Component: 2450 - total flux cleaned = -0.00575094 Jy ! Component: 2500 - total flux cleaned = -0.00579111 Jy ! Component: 2550 - total flux cleaned = -0.00575142 Jy ! Component: 2600 - total flux cleaned = -0.0057713 Jy ! Component: 2650 - total flux cleaned = -0.00579093 Jy ! Component: 2700 - total flux cleaned = -0.00581022 Jy ! Component: 2750 - total flux cleaned = -0.00577177 Jy ! Component: 2800 - total flux cleaned = -0.00579101 Jy ! Component: 2850 - total flux cleaned = -0.00573438 Jy ! Component: 2900 - total flux cleaned = -0.00571572 Jy ! Component: 2950 - total flux cleaned = -0.00575292 Jy ! Component: 3000 - total flux cleaned = -0.00560523 Jy ! Component: 3050 - total flux cleaned = -0.00560543 Jy ! Component: 3100 - total flux cleaned = -0.00560547 Jy ! Component: 3150 - total flux cleaned = -0.00558749 Jy ! Component: 3200 - total flux cleaned = -0.00560545 Jy ! Component: 3250 - total flux cleaned = -0.00556981 Jy ! Component: 3300 - total flux cleaned = -0.00546375 Jy ! Component: 3350 - total flux cleaned = -0.00551646 Jy ! Component: 3400 - total flux cleaned = -0.00544684 Jy ! Component: 3450 - total flux cleaned = -0.00544678 Jy ! Component: 3500 - total flux cleaned = -0.0053954 Jy ! Component: 3550 - total flux cleaned = -0.00534436 Jy ! Component: 3600 - total flux cleaned = -0.00541217 Jy ! Component: 3650 - total flux cleaned = -0.00539531 Jy ! Component: 3700 - total flux cleaned = -0.00534511 Jy ! Component: 3750 - total flux cleaned = -0.00534514 Jy ! Component: 3800 - total flux cleaned = -0.00527904 Jy ! Component: 3850 - total flux cleaned = -0.00534457 Jy ! Component: 3900 - total flux cleaned = -0.00532814 Jy ! Component: 3950 - total flux cleaned = -0.00527965 Jy ! Component: 4000 - total flux cleaned = -0.00524777 Jy ! Component: 4050 - total flux cleaned = -0.00524789 Jy ! Total flux subtracted in 4096 components = -0.00524784 Jy ! Clean residual min=-0.001158 max=0.001046 Jy/beam ! Clean residual mean=-0.000014 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0879873 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 303 components and 0.0879873 Jy ![Exited script file: muppet] wmap "J0005-3445_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.893 x 13.97 at 12 degrees (North through East) ! Clean map min=-0.0020688 max=0.086701 Jy/beam ! Writing clean map to FITS file: J0005-3445_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0867012 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303028 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04852 1.04852 2.09705 4.1941 8.3882 16.7764 33.5528 67.1056 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.893 x 13.97 at 12 degrees (North through East) ! Clean map min=-0.0020688 max=0.086701 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0005-3445_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:00:57 2019