! Started logfile: J0004-4736_S_2017_07_09_pus_uvs.log on Wed May 8 14:36:25 2019 obs J0004-4736_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0004-4736_S_2017_07_09_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.312821 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0004-4736 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0004-4736_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.756126Jy sigma=0.004542 ! Fit after self-cal, rms=0.741690Jy sigma=0.004454 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=35.86 mas, bpa=-8.983 degrees ! Estimated noise=5988.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196245 Jy ! Component: 100 - total flux cleaned = 0.243359 Jy ! Total flux subtracted in 100 components = 0.243359 Jy ! Clean residual min=-0.014616 max=0.019956 Jy/beam ! Clean residual mean=-0.000161 rms=0.005844 Jy/beam ! Combined flux in latest and established models = 0.243359 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.243359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113016Jy sigma=0.000647 ! Fit after self-cal, rms=0.112927Jy sigma=0.000647 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=34.77 mas, bpa=-8.829 degrees ! Estimated noise=5421.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250554 Jy ! Component: 100 - total flux cleaned = 0.0194284 Jy ! Component: 150 - total flux cleaned = 0.00952098 Jy ! Component: 200 - total flux cleaned = 0.00420609 Jy ! Total flux subtracted in 200 components = 0.00420609 Jy ! Clean residual min=-0.005492 max=0.005444 Jy/beam ! Clean residual mean=-0.000086 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 0.247565 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 54 components and 0.247565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105497Jy sigma=0.000607 ! Fit after self-cal, rms=0.105349Jy sigma=0.000606 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.06 ! LA 1.04 MK 0.97 NL 1.00* OV 1.00 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.90 ! LA 0.97 MK 1.03 NL 1.00* OV 1.01 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.00* KP 1.00* ! LA 0.93 MK 1.07 NL 1.00* OV 0.90 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.105349Jy sigma=0.000606 ! Fit after self-cal, rms=0.101529Jy sigma=0.000598 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=34.33 mas, bpa=-8.812 degrees ! Estimated noise=5363.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171824 Jy ! Component: 100 - total flux cleaned = 0.0020318 Jy ! Component: 150 - total flux cleaned = 0.00313026 Jy ! Component: 200 - total flux cleaned = 0.00386055 Jy ! Total flux subtracted in 200 components = 0.00386055 Jy ! Clean residual min=-0.001850 max=0.001871 Jy/beam ! Clean residual mean=0.000073 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.251425 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.251425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101028Jy sigma=0.000596 ! Fit after self-cal, rms=0.101003Jy sigma=0.000595 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101003Jy sigma=0.000595 ! Fit after self-cal, rms=0.100908Jy sigma=0.000595 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=34.32 mas, bpa=-8.818 degrees ! Estimated noise=5358.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170437 Jy ! Component: 100 - total flux cleaned = 0.00273959 Jy ! Component: 150 - total flux cleaned = 0.00354428 Jy ! Component: 200 - total flux cleaned = 0.00430639 Jy ! Total flux subtracted in 200 components = 0.00430639 Jy ! Clean residual min=-0.001099 max=0.001102 Jy/beam ! Clean residual mean=0.000036 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.255732 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 143 components and 0.255732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100765Jy sigma=0.000594 ! Fit after self-cal, rms=0.100764Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120595 Jy ! Component: 100 - total flux cleaned = -0.000307415 Jy ! Component: 150 - total flux cleaned = -0.000193844 Jy ! Component: 200 - total flux cleaned = -3.38723e-05 Jy ! Total flux subtracted in 200 components = -3.38723e-05 Jy ! Clean residual min=-0.000860 max=0.000854 Jy/beam ! Clean residual mean=0.000019 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.255698 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 185 components and 0.255698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100703Jy sigma=0.000594 ! Fit after self-cal, rms=0.100699Jy sigma=0.000594 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100699Jy sigma=0.000594 ! Fit after self-cal, rms=0.100572Jy sigma=0.000594 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=34.3 mas, bpa=-8.822 degrees ! Estimated noise=5352.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013676 Jy ! Component: 100 - total flux cleaned = 0.000190309 Jy ! Component: 150 - total flux cleaned = -1.51786e-05 Jy ! Component: 200 - total flux cleaned = 8.41545e-05 Jy ! Total flux subtracted in 200 components = 8.41545e-05 Jy ! Clean residual min=-0.000777 max=0.000784 Jy/beam ! Clean residual mean=0.000019 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.255782 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 227 components and 0.255782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100525Jy sigma=0.000594 ! Fit after self-cal, rms=0.100523Jy sigma=0.000594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204939 Jy ! Component: 100 - total flux cleaned = 0.000340119 Jy ! Component: 150 - total flux cleaned = 0.000553523 Jy ! Component: 200 - total flux cleaned = 0.000798869 Jy ! Total flux subtracted in 200 components = 0.000798869 Jy ! Clean residual min=-0.000673 max=0.000675 Jy/beam ! Clean residual mean=0.000013 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.256581 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 260 components and 0.256581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100492Jy sigma=0.000593 ! Fit after self-cal, rms=0.100490Jy sigma=0.000593 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100490Jy sigma=0.000593 ! Fit after self-cal, rms=0.100412Jy sigma=0.000593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.898 mas, bmaj=41.85 mas, bpa=2.594 degrees ! Estimated noise=6903.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814356 Jy ! Component: 100 - total flux cleaned = 0.00115107 Jy ! Component: 150 - total flux cleaned = 0.00139591 Jy ! Component: 200 - total flux cleaned = 0.00160362 Jy ! Total flux subtracted in 200 components = 0.00160362 Jy ! Clean residual min=-0.000717 max=0.000710 Jy/beam ! Clean residual mean=0.000006 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.258184 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 301 components and 0.258184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100389Jy sigma=0.000593 ! Fit after self-cal, rms=0.100390Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15792e-05 Jy ! Component: 100 - total flux cleaned = -9.52675e-05 Jy ! Component: 150 - total flux cleaned = -0.000171229 Jy ! Component: 200 - total flux cleaned = -0.000251591 Jy ! Total flux subtracted in 200 components = -0.000251591 Jy ! Clean residual min=-0.000704 max=0.000698 Jy/beam ! Clean residual mean=-0.000010 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.257933 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 327 components and 0.257933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100380Jy sigma=0.000593 ! Fit after self-cal, rms=0.100376Jy sigma=0.000593 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=34.27 mas, bpa=-8.823 degrees ! Estimated noise=5347.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 34.27 at -8.823 degrees (North through East) ! Clean map min=-0.0075691 max=0.2439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.747 mas, bmaj=35.46 mas, bpa=-8.994 degrees ! Estimated noise=5932.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193625 Jy ! Component: 100 - total flux cleaned = 0.239062 Jy ! Component: 150 - total flux cleaned = 0.258335 Jy ! Component: 200 - total flux cleaned = 0.256959 Jy ! Total flux subtracted in 200 components = 0.256959 Jy ! Clean residual min=-0.007519 max=0.007515 Jy/beam ! Clean residual mean=-0.000057 rms=0.003011 Jy/beam ! Combined flux in latest and established models = 0.256959 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.256959 Jy ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=34.27 mas, bpa=-8.823 degrees ! Estimated noise=5347.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000541398 Jy ! Component: 100 - total flux cleaned = -0.00415078 Jy ! Component: 150 - total flux cleaned = -0.00730208 Jy ! Component: 200 - total flux cleaned = -0.00872727 Jy ! Total flux subtracted in 200 components = -0.00872727 Jy ! Clean residual min=-0.003637 max=0.003623 Jy/beam ! Clean residual mean=-0.000024 rms=0.001473 Jy/beam ! Combined flux in latest and established models = 0.248232 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 102 components and 0.248232 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.898 mas, bmaj=41.85 mas, bpa=2.594 degrees ! Estimated noise=6903.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00385675 Jy ! Component: 100 - total flux cleaned = 0.00492232 Jy ! Component: 150 - total flux cleaned = 0.00618448 Jy ! Component: 200 - total flux cleaned = 0.00694001 Jy ! Total flux subtracted in 200 components = 0.00694001 Jy ! Clean residual min=-0.001528 max=0.001500 Jy/beam ! Clean residual mean=0.000009 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.255172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269851 Jy ! Component: 100 - total flux cleaned = 0.000540692 Jy ! Component: 150 - total flux cleaned = 0.000634465 Jy ! Component: 200 - total flux cleaned = 0.000737651 Jy ! Total flux subtracted in 200 components = 0.000737651 Jy ! Clean residual min=-0.001732 max=0.001758 Jy/beam ! Clean residual mean=-0.000029 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.255909 Jy ! Adding 107 model components to the UV plane model. ! The established model now contains 209 components and 0.255909 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=34.27 mas, bpa=-8.823 degrees ! Estimated noise=5347.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249742 Jy ! Component: 100 - total flux cleaned = -0.000229661 Jy ! Component: 150 - total flux cleaned = -0.000505287 Jy ! Component: 200 - total flux cleaned = -0.000666402 Jy ! Total flux subtracted in 200 components = -0.000666402 Jy ! Clean residual min=-0.001241 max=0.001244 Jy/beam ! Clean residual mean=-0.000001 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.255243 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 253 components and 0.255243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100483Jy sigma=0.000594 ! Fit after self-cal, rms=0.100487Jy sigma=0.000594 wmodel J0004-4736_S_2017_07_09_pus_map.mod ! Writing 253 model components to file: J0004-4736_S_2017_07_09_pus_map.mod wobs J0004-4736_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0004-4736_S_2017_07_09_pus_uvs.fits wwins J0004-4736_S_2017_07_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0004-4736_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 34.27 at -8.823 degrees (North through East) ! Clean map min=-0.0067138 max=0.22901 Jy/beam ! Writing clean map to FITS file: J0004-4736_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.229011 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043904 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.575135 0.575135 1.15027 2.30054 4.60108 9.20215 18.4043 36.8086 73.6172 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 34.27 at -8.823 degrees (North through East) ! Clean map min=-0.0067138 max=0.22901 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0004-4736_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:36:29 2019