! Started logfile: J0003-1547_S_2017_02_19_pus_uvs.log on Sat May 4 18:38:14 2019 obs J0003-1547_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0003-1547_S_2017_02_19_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.758819 visibilities/baseline/integration-bin. ! Found source: J0003-1547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 19532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0003-1547_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 647 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984252Jy sigma=0.006743 ! Fit after self-cal, rms=0.938040Jy sigma=0.006461 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=6.476 mas, bpa=-6.564 degrees ! Estimated noise=1204.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.052078 Jy ! Component: 100 - total flux cleaned = 0.063604 Jy ! Total flux subtracted in 100 components = 0.063604 Jy ! Clean residual min=-0.003999 max=0.003756 Jy/beam ! Clean residual mean=-0.000006 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.063604 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.063604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101499Jy sigma=0.000653 ! Fit after self-cal, rms=0.100741Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=7.543 mas, bpa=-4.11 degrees ! Estimated noise=825.387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400528 Jy ! Component: 100 - total flux cleaned = 0.0056111 Jy ! Component: 150 - total flux cleaned = 0.00638433 Jy ! Component: 200 - total flux cleaned = 0.00650217 Jy ! Total flux subtracted in 200 components = 0.00650217 Jy ! Clean residual min=-0.002224 max=0.002350 Jy/beam ! Clean residual mean=-0.000008 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0701062 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0701062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100549Jy sigma=0.000648 ! Fit after self-cal, rms=0.100511Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.05 KP 1.06 ! LA 1.03 MK 1.01 NL 0.93 OV 1.12 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.08 HN 0.99 KP 1.02 ! LA 1.01 MK 1.00 NL 1.00 OV 1.15 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 1.02 KP 0.89 ! LA 0.81 MK 1.07 NL 1.07 OV 0.99 ! PT 1.00* SC 1.09 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 0.82 KP 1.00* ! LA 0.83 MK 1.05 NL 1.00* OV 0.91 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100511Jy sigma=0.000648 ! Fit after self-cal, rms=0.097646Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=7.574 mas, bpa=-4.05 degrees ! Estimated noise=824.632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161341 Jy ! Component: 100 - total flux cleaned = -0.000158693 Jy ! Component: 150 - total flux cleaned = -0.000189032 Jy ! Component: 200 - total flux cleaned = -0.000229989 Jy ! Total flux subtracted in 200 components = -0.000229989 Jy ! Clean residual min=-0.002094 max=0.002170 Jy/beam ! Clean residual mean=-0.000008 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0698762 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0698762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097639Jy sigma=0.000646 ! Fit after self-cal, rms=0.097526Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097526Jy sigma=0.000645 ! Fit after self-cal, rms=0.097385Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=7.588 mas, bpa=-3.919 degrees ! Estimated noise=823.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.66204e-05 Jy ! Component: 100 - total flux cleaned = 4.08962e-05 Jy ! Component: 150 - total flux cleaned = 1.6215e-05 Jy ! Component: 200 - total flux cleaned = -1.73239e-05 Jy ! Total flux subtracted in 200 components = -1.73239e-05 Jy ! Clean residual min=-0.002053 max=0.002113 Jy/beam ! Clean residual mean=-0.000007 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0698588 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0698588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097382Jy sigma=0.000644 ! Fit after self-cal, rms=0.097389Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89738e-05 Jy ! Component: 100 - total flux cleaned = -1.75075e-06 Jy ! Component: 150 - total flux cleaned = -3.00072e-05 Jy ! Component: 200 - total flux cleaned = -5.6038e-05 Jy ! Total flux subtracted in 200 components = -5.6038e-05 Jy ! Clean residual min=-0.001994 max=0.002136 Jy/beam ! Clean residual mean=-0.000006 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0698028 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0698028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097387Jy sigma=0.000644 ! Fit after self-cal, rms=0.097386Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097386Jy sigma=0.000644 ! Fit after self-cal, rms=0.097468Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=7.582 mas, bpa=-3.822 degrees ! Estimated noise=822.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.69269e-05 Jy ! Component: 100 - total flux cleaned = -0.000105045 Jy ! Component: 150 - total flux cleaned = -0.000121932 Jy ! Component: 200 - total flux cleaned = -0.000137527 Jy ! Total flux subtracted in 200 components = -0.000137527 Jy ! Clean residual min=-0.001962 max=0.002137 Jy/beam ! Clean residual mean=-0.000008 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0696653 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0696653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097467Jy sigma=0.000644 ! Fit after self-cal, rms=0.097475Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.74565e-05 Jy ! Component: 100 - total flux cleaned = -7.48877e-05 Jy ! Component: 150 - total flux cleaned = -8.16171e-05 Jy ! Component: 200 - total flux cleaned = -8.81867e-05 Jy ! Total flux subtracted in 200 components = -8.81867e-05 Jy ! Clean residual min=-0.001960 max=0.002135 Jy/beam ! Clean residual mean=-0.000007 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0695771 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.0695771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097474Jy sigma=0.000644 ! Fit after self-cal, rms=0.097474Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097474Jy sigma=0.000644 ! Fit after self-cal, rms=0.097529Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.881 mas, bmaj=13.39 mas, bpa=2.345 degrees ! Estimated noise=1105.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.4959e-05 Jy ! Component: 100 - total flux cleaned = 5.37102e-05 Jy ! Component: 150 - total flux cleaned = 6.13722e-05 Jy ! Component: 200 - total flux cleaned = 6.14624e-05 Jy ! Total flux subtracted in 200 components = 6.14624e-05 Jy ! Clean residual min=-0.002259 max=0.002291 Jy/beam ! Clean residual mean=-0.000016 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0696385 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0696385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097530Jy sigma=0.000644 ! Fit after self-cal, rms=0.097535Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.30884e-05 Jy ! Component: 100 - total flux cleaned = -1.30854e-05 Jy ! Component: 150 - total flux cleaned = -2.51494e-05 Jy ! Component: 200 - total flux cleaned = -4.14709e-05 Jy ! Total flux subtracted in 200 components = -4.14709e-05 Jy ! Clean residual min=-0.002246 max=0.002277 Jy/beam ! Clean residual mean=-0.000016 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0695971 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0695971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097536Jy sigma=0.000644 ! Fit after self-cal, rms=0.097536Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.58 mas, bpa=-3.736 degrees ! Estimated noise=822.815 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 7.58 at -3.736 degrees (North through East) ! Clean map min=-0.0018843 max=0.067785 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=6.501 mas, bpa=-6.363 degrees ! Estimated noise=1199.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523939 Jy ! Component: 100 - total flux cleaned = 0.0641409 Jy ! Component: 150 - total flux cleaned = 0.0680504 Jy ! Component: 200 - total flux cleaned = 0.0685271 Jy ! Total flux subtracted in 200 components = 0.0685271 Jy ! Clean residual min=-0.003131 max=0.003143 Jy/beam ! Clean residual mean=-0.000003 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.068527 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.068527 Jy ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.58 mas, bpa=-3.736 degrees ! Estimated noise=822.815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124223 Jy ! Component: 100 - total flux cleaned = 0.00130682 Jy ! Component: 150 - total flux cleaned = 0.00130761 Jy ! Component: 200 - total flux cleaned = 0.0013075 Jy ! Total flux subtracted in 200 components = 0.0013075 Jy ! Clean residual min=-0.001988 max=0.002139 Jy/beam ! Clean residual mean=-0.000007 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0698345 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 16 components and 0.0698345 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.881 mas, bmaj=13.39 mas, bpa=2.345 degrees ! Estimated noise=1105.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67435e-05 Jy ! Component: 100 - total flux cleaned = 2.60674e-05 Jy ! Component: 150 - total flux cleaned = 2.5093e-05 Jy ! Component: 200 - total flux cleaned = 1.61673e-05 Jy ! Total flux subtracted in 200 components = 1.61673e-05 Jy ! Clean residual min=-0.002209 max=0.002267 Jy/beam ! Clean residual mean=-0.000015 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0698507 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.50005e-06 Jy ! Component: 100 - total flux cleaned = -1.64639e-05 Jy ! Component: 150 - total flux cleaned = -2.43446e-05 Jy ! Component: 200 - total flux cleaned = -3.8643e-05 Jy ! Total flux subtracted in 200 components = -3.8643e-05 Jy ! Clean residual min=-0.002213 max=0.002265 Jy/beam ! Clean residual mean=-0.000016 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.069812 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.069812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=7.58 mas, bpa=-3.736 degrees ! Estimated noise=822.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162987 Jy ! Component: 100 - total flux cleaned = -0.000233105 Jy ! Component: 150 - total flux cleaned = -0.000276675 Jy ! Component: 200 - total flux cleaned = -0.000290074 Jy ! Total flux subtracted in 200 components = -0.000290074 Jy ! Clean residual min=-0.001960 max=0.002137 Jy/beam ! Clean residual mean=-0.000008 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.069522 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.069522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097540Jy sigma=0.000644 ! Fit after self-cal, rms=0.097541Jy sigma=0.000644 wmodel J0003-1547_S_2017_02_19_pus_map.mod ! Writing 36 model components to file: J0003-1547_S_2017_02_19_pus_map.mod wobs J0003-1547_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0003-1547_S_2017_02_19_pus_uvs.fits wwins J0003-1547_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0003-1547_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204844 Jy ! Component: 100 - total flux cleaned = -8.44185e-06 Jy ! Component: 150 - total flux cleaned = -0.000142573 Jy ! Component: 200 - total flux cleaned = -0.000142168 Jy ! Component: 250 - total flux cleaned = -0.000236394 Jy ! Component: 300 - total flux cleaned = -0.000175935 Jy ! Component: 350 - total flux cleaned = 2.93707e-05 Jy ! Component: 400 - total flux cleaned = 0.000142922 Jy ! Component: 450 - total flux cleaned = 0.000282385 Jy ! Component: 500 - total flux cleaned = 0.000281041 Jy ! Component: 550 - total flux cleaned = 0.000333898 Jy ! Component: 600 - total flux cleaned = 0.00028083 Jy ! Component: 650 - total flux cleaned = 0.000229037 Jy ! Component: 700 - total flux cleaned = 0.000279592 Jy ! Component: 750 - total flux cleaned = 0.000204618 Jy ! Component: 800 - total flux cleaned = 0.000229894 Jy ! Component: 850 - total flux cleaned = 0.00025462 Jy ! Component: 900 - total flux cleaned = 0.000254524 Jy ! Component: 950 - total flux cleaned = 0.000183115 Jy ! Component: 1000 - total flux cleaned = 6.62882e-05 Jy ! Component: 1050 - total flux cleaned = -2.53606e-05 Jy ! Component: 1100 - total flux cleaned = -4.81765e-05 Jy ! Component: 1150 - total flux cleaned = -0.000137852 Jy ! Component: 1200 - total flux cleaned = -0.000181972 Jy ! Component: 1250 - total flux cleaned = -0.000247151 Jy ! Component: 1300 - total flux cleaned = -0.000268502 Jy ! Component: 1350 - total flux cleaned = -0.000353502 Jy ! Component: 1400 - total flux cleaned = -0.000374534 Jy ! Component: 1450 - total flux cleaned = -0.000457439 Jy ! Component: 1500 - total flux cleaned = -0.000498389 Jy ! Component: 1550 - total flux cleaned = -0.000518691 Jy ! Component: 1600 - total flux cleaned = -0.000558774 Jy ! Component: 1650 - total flux cleaned = -0.000598538 Jy ! Component: 1700 - total flux cleaned = -0.000637968 Jy ! Component: 1750 - total flux cleaned = -0.000696221 Jy ! Component: 1800 - total flux cleaned = -0.000791823 Jy ! Component: 1850 - total flux cleaned = -0.000773109 Jy ! Component: 1900 - total flux cleaned = -0.000829573 Jy ! Component: 1950 - total flux cleaned = -0.00086694 Jy ! Component: 2000 - total flux cleaned = -0.000922296 Jy ! Component: 2050 - total flux cleaned = -0.000885849 Jy ! Component: 2100 - total flux cleaned = -0.000976 Jy ! Component: 2150 - total flux cleaned = -0.00097617 Jy ! Component: 2200 - total flux cleaned = -0.00104702 Jy ! Component: 2250 - total flux cleaned = -0.00104722 Jy ! Component: 2300 - total flux cleaned = -0.00111638 Jy ! Component: 2350 - total flux cleaned = -0.00106483 Jy ! Component: 2400 - total flux cleaned = -0.00116688 Jy ! Component: 2450 - total flux cleaned = -0.00114989 Jy ! Component: 2500 - total flux cleaned = -0.00113359 Jy ! Component: 2550 - total flux cleaned = -0.0011833 Jy ! Component: 2600 - total flux cleaned = -0.00115026 Jy ! Component: 2650 - total flux cleaned = -0.00115008 Jy ! Component: 2700 - total flux cleaned = -0.00118253 Jy ! Component: 2750 - total flux cleaned = -0.00118244 Jy ! Component: 2800 - total flux cleaned = -0.00121424 Jy ! Component: 2850 - total flux cleaned = -0.00118273 Jy ! Component: 2900 - total flux cleaned = -0.00124536 Jy ! Component: 2950 - total flux cleaned = -0.00119865 Jy ! Component: 3000 - total flux cleaned = -0.0012297 Jy ! Component: 3050 - total flux cleaned = -0.00121443 Jy ! Component: 3100 - total flux cleaned = -0.00124486 Jy ! Component: 3150 - total flux cleaned = -0.00119958 Jy ! Component: 3200 - total flux cleaned = -0.00113966 Jy ! Component: 3250 - total flux cleaned = -0.00116955 Jy ! Component: 3300 - total flux cleaned = -0.00121373 Jy ! Component: 3350 - total flux cleaned = -0.0011697 Jy ! Component: 3400 - total flux cleaned = -0.00115498 Jy ! Component: 3450 - total flux cleaned = -0.00116956 Jy ! Component: 3500 - total flux cleaned = -0.00111196 Jy ! Component: 3550 - total flux cleaned = -0.0011264 Jy ! Component: 3600 - total flux cleaned = -0.0011548 Jy ! Component: 3650 - total flux cleaned = -0.00116892 Jy ! Component: 3700 - total flux cleaned = -0.00115493 Jy ! Component: 3750 - total flux cleaned = -0.00118271 Jy ! Component: 3800 - total flux cleaned = -0.00112734 Jy ! Component: 3850 - total flux cleaned = -0.00114127 Jy ! Component: 3900 - total flux cleaned = -0.00112758 Jy ! Component: 3950 - total flux cleaned = -0.00107336 Jy ! Component: 4000 - total flux cleaned = -0.00107331 Jy ! Component: 4050 - total flux cleaned = -0.00101971 Jy ! Total flux subtracted in 4096 components = -0.0010465 Jy ! Clean residual min=-0.000765 max=0.000858 Jy/beam ! Clean residual mean=-0.000003 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.0684755 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 318 components and 0.0684754 Jy ![Exited script file: muppet] wmap "J0003-1547_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 7.58 at -3.736 degrees (North through East) ! Clean map min=-0.0017895 max=0.067645 Jy/beam ! Writing clean map to FITS file: J0003-1547_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0676454 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000242663 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07618 1.07618 2.15237 4.30474 8.60948 17.219 34.4379 68.8758 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.987 x 7.58 at -3.736 degrees (North through East) ! Clean map min=-0.0017895 max=0.067645 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0003-1547_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:38:19 2019