! Started logfile: J0002-2153_S_2017_05_27_pus_uvs.log on Fri May 3 10:51:48 2019 obs J0002-2153_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0002-2153_S_2017_05_27_pus_uva.fits ! AN table 1: 156 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.859829 visibilities/baseline/integration-bin. ! Found source: J0002-2153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 24144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0002-2153_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 831 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994277Jy sigma=0.026469 ! Fit after self-cal, rms=0.950599Jy sigma=0.026366 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.749 mas, bpa=-6.415 degrees ! Estimated noise=812.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282205 Jy ! Component: 100 - total flux cleaned = 0.0357626 Jy ! Total flux subtracted in 100 components = 0.0357626 Jy ! Clean residual min=-0.010259 max=0.013414 Jy/beam ! Clean residual mean=-0.000016 rms=0.003242 Jy/beam ! Combined flux in latest and established models = 0.0357626 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0357626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114659Jy sigma=0.001060 ! Fit after self-cal, rms=0.113989Jy sigma=0.000996 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=7.828 mas, bpa=-3.367 degrees ! Estimated noise=497.041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00569825 Jy ! Component: 100 - total flux cleaned = 0.00599359 Jy ! Component: 150 - total flux cleaned = 0.00599373 Jy ! Component: 200 - total flux cleaned = 0.00588737 Jy ! Total flux subtracted in 200 components = 0.00588737 Jy ! Clean residual min=-0.008216 max=0.011141 Jy/beam ! Clean residual mean=-0.000018 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.04165 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.04165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113178Jy sigma=0.001029 ! Fit after self-cal, rms=0.113116Jy sigma=0.001029 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.59 FD 0.74 HN 0.79 KP 0.83 ! LA 0.87 MK 0.93 NL 0.73 OV 0.86 ! PT 0.88 SC 0.65 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.40 FD 0.82 HN 0.76 KP 0.83 ! LA 0.80 MK 0.89 NL 0.83 OV 0.89 ! PT 0.88 SC 0.63 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 10.36 FD 0.90 HN 0.86 KP 0.97 ! LA 0.95 MK 0.94 NL 0.99 OV 0.82 ! PT 1.00 SC 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.75 HN 0.70 KP 1.00* ! LA 0.69 MK 0.85 NL 1.00* OV 1.00* ! PT 0.81 SC 1.00* ! ! ! Fit before self-cal, rms=0.113116Jy sigma=0.001029 ! Fit after self-cal, rms=0.068977Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.87 mas, bpa=-2.956 degrees ! Estimated noise=495.654 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.97598e-05 Jy ! Component: 100 - total flux cleaned = 0.000112645 Jy ! Component: 150 - total flux cleaned = 0.000142034 Jy ! Component: 200 - total flux cleaned = 0.000167849 Jy ! Total flux subtracted in 200 components = 0.000167849 Jy ! Clean residual min=-0.001571 max=0.001668 Jy/beam ! Clean residual mean=-0.000008 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0418179 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0418179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068952Jy sigma=0.000656 ! Fit after self-cal, rms=0.067629Jy sigma=0.000649 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176155 Jy ! Component: 100 - total flux cleaned = 0.00186397 Jy ! Component: 150 - total flux cleaned = 0.00186422 Jy ! Component: 200 - total flux cleaned = 0.00186376 Jy ! Total flux subtracted in 200 components = 0.00186376 Jy ! Clean residual min=-0.001617 max=0.001557 Jy/beam ! Clean residual mean=-0.000005 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0436816 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.0436816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067556Jy sigma=0.000649 ! Fit after self-cal, rms=0.067562Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067562Jy sigma=0.000649 ! Fit after self-cal, rms=0.065529Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.849 mas, bpa=-2.728 degrees ! Estimated noise=498.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427019 Jy ! Component: 100 - total flux cleaned = 0.000425948 Jy ! Component: 150 - total flux cleaned = 0.000405597 Jy ! Component: 200 - total flux cleaned = 0.000406087 Jy ! Total flux subtracted in 200 components = 0.000406087 Jy ! Clean residual min=-0.001537 max=0.001474 Jy/beam ! Clean residual mean=-0.000005 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0440877 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0440877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065516Jy sigma=0.000646 ! Fit after self-cal, rms=0.065417Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.87075e-05 Jy ! Component: 100 - total flux cleaned = 5.02871e-05 Jy ! Component: 150 - total flux cleaned = 5.1566e-05 Jy ! Component: 200 - total flux cleaned = 5.07228e-05 Jy ! Total flux subtracted in 200 components = 5.07228e-05 Jy ! Clean residual min=-0.001460 max=0.001517 Jy/beam ! Clean residual mean=-0.000005 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0441384 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0441384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065408Jy sigma=0.000645 ! Fit after self-cal, rms=0.065409Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065409Jy sigma=0.000645 ! Fit after self-cal, rms=0.064999Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.841 mas, bpa=-2.861 degrees ! Estimated noise=497.102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.89062e-05 Jy ! Component: 100 - total flux cleaned = 8.14007e-05 Jy ! Component: 150 - total flux cleaned = 9.25096e-05 Jy ! Component: 200 - total flux cleaned = 8.17179e-05 Jy ! Total flux subtracted in 200 components = 8.17179e-05 Jy ! Clean residual min=-0.001453 max=0.001489 Jy/beam ! Clean residual mean=-0.000004 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0442202 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0442201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064994Jy sigma=0.000645 ! Fit after self-cal, rms=0.065005Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63553e-05 Jy ! Component: 100 - total flux cleaned = -3.71207e-05 Jy ! Component: 150 - total flux cleaned = -3.68426e-05 Jy ! Component: 200 - total flux cleaned = -4.57475e-05 Jy ! Total flux subtracted in 200 components = -4.57475e-05 Jy ! Clean residual min=-0.001412 max=0.001458 Jy/beam ! Clean residual mean=-0.000004 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0441744 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0441744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065002Jy sigma=0.000644 ! Fit after self-cal, rms=0.065005Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065005Jy sigma=0.000644 ! Fit after self-cal, rms=0.065141Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.523 mas, bmaj=18.03 mas, bpa=0.531 degrees ! Estimated noise=668.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266259 Jy ! Component: 100 - total flux cleaned = 0.000266683 Jy ! Component: 150 - total flux cleaned = 0.000267037 Jy ! Component: 200 - total flux cleaned = 0.000254476 Jy ! Total flux subtracted in 200 components = 0.000254476 Jy ! Clean residual min=-0.001540 max=0.001748 Jy/beam ! Clean residual mean=-0.000010 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.0444289 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0444289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065141Jy sigma=0.000644 ! Fit after self-cal, rms=0.065152Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.6174e-05 Jy ! Component: 100 - total flux cleaned = 3.5495e-05 Jy ! Component: 150 - total flux cleaned = 2.22746e-05 Jy ! Component: 200 - total flux cleaned = 1.10277e-05 Jy ! Total flux subtracted in 200 components = 1.10277e-05 Jy ! Clean residual min=-0.001544 max=0.001740 Jy/beam ! Clean residual mean=-0.000010 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0444399 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0444399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065153Jy sigma=0.000644 ! Fit after self-cal, rms=0.065158Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.841 mas, bpa=-2.93 degrees ! Estimated noise=497.463 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.885 x 7.841 at -2.93 degrees (North through East) ! Clean map min=-0.0013808 max=0.037737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=6.895 mas, bpa=-2.24 degrees ! Estimated noise=796.811 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0314538 Jy ! Component: 100 - total flux cleaned = 0.0387266 Jy ! Component: 150 - total flux cleaned = 0.0416979 Jy ! Component: 200 - total flux cleaned = 0.0433534 Jy ! Total flux subtracted in 200 components = 0.0433534 Jy ! Clean residual min=-0.002303 max=0.002561 Jy/beam ! Clean residual mean=-0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0433534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0433534 Jy ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.841 mas, bpa=-2.93 degrees ! Estimated noise=497.463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (83, 101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139719 Jy ! Component: 100 - total flux cleaned = 0.00175583 Jy ! Component: 150 - total flux cleaned = 0.00197412 Jy ! Component: 200 - total flux cleaned = 0.00213145 Jy ! Total flux subtracted in 200 components = 0.00213145 Jy ! Clean residual min=-0.001397 max=0.001303 Jy/beam ! Clean residual mean=-0.000005 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0454849 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 0.0454849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.523 mas, bmaj=18.03 mas, bpa=0.531 degrees ! Estimated noise=668.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470176 Jy ! Component: 100 - total flux cleaned = 0.000655158 Jy ! Component: 150 - total flux cleaned = 0.000722399 Jy ! Component: 200 - total flux cleaned = 0.000778926 Jy ! Total flux subtracted in 200 components = 0.000778926 Jy ! Clean residual min=-0.001400 max=0.001557 Jy/beam ! Clean residual mean=-0.000011 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0462638 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7991e-05 Jy ! Component: 100 - total flux cleaned = 5.37935e-05 Jy ! Component: 150 - total flux cleaned = 7.20515e-05 Jy ! Component: 200 - total flux cleaned = 8.90158e-05 Jy ! Total flux subtracted in 200 components = 8.90158e-05 Jy ! Clean residual min=-0.001396 max=0.001555 Jy/beam ! Clean residual mean=-0.000011 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0463528 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0463528 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=7.841 mas, bpa=-2.93 degrees ! Estimated noise=497.463 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249914 Jy ! Component: 100 - total flux cleaned = -0.000270114 Jy ! Component: 150 - total flux cleaned = -0.000270305 Jy ! Component: 200 - total flux cleaned = -0.000271175 Jy ! Total flux subtracted in 200 components = -0.000271175 Jy ! Clean residual min=-0.001369 max=0.001306 Jy/beam ! Clean residual mean=-0.000005 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0460816 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.0460816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065132Jy sigma=0.000644 ! Fit after self-cal, rms=0.065108Jy sigma=0.000644 wmodel J0002-2153_S_2017_05_27_pus_map.mod ! Writing 62 model components to file: J0002-2153_S_2017_05_27_pus_map.mod wobs J0002-2153_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0002-2153_S_2017_05_27_pus_uvs.fits wwins J0002-2153_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0002-2153_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203059 Jy ! Component: 100 - total flux cleaned = -0.000349042 Jy ! Component: 150 - total flux cleaned = -0.000543644 Jy ! Component: 200 - total flux cleaned = -0.000711067 Jy ! Component: 250 - total flux cleaned = -0.000853725 Jy ! Component: 300 - total flux cleaned = -0.000853752 Jy ! Component: 350 - total flux cleaned = -0.000903314 Jy ! Component: 400 - total flux cleaned = -0.000935361 Jy ! Component: 450 - total flux cleaned = -0.000982263 Jy ! Component: 500 - total flux cleaned = -0.00102785 Jy ! Component: 550 - total flux cleaned = -0.00108759 Jy ! Component: 600 - total flux cleaned = -0.00120458 Jy ! Component: 650 - total flux cleaned = -0.00129086 Jy ! Component: 700 - total flux cleaned = -0.00143165 Jy ! Component: 750 - total flux cleaned = -0.00152816 Jy ! Component: 800 - total flux cleaned = -0.00160911 Jy ! Component: 850 - total flux cleaned = -0.0016356 Jy ! Component: 900 - total flux cleaned = -0.00170123 Jy ! Component: 950 - total flux cleaned = -0.00173982 Jy ! Component: 1000 - total flux cleaned = -0.0017396 Jy ! Component: 1050 - total flux cleaned = -0.00177708 Jy ! Component: 1100 - total flux cleaned = -0.00178936 Jy ! Component: 1150 - total flux cleaned = -0.00182578 Jy ! Component: 1200 - total flux cleaned = -0.00184972 Jy ! Component: 1250 - total flux cleaned = -0.00186122 Jy ! Component: 1300 - total flux cleaned = -0.00188461 Jy ! Component: 1350 - total flux cleaned = -0.00189614 Jy ! Component: 1400 - total flux cleaned = -0.00191885 Jy ! Component: 1450 - total flux cleaned = -0.0019302 Jy ! Component: 1500 - total flux cleaned = -0.00197445 Jy ! Component: 1550 - total flux cleaned = -0.00198543 Jy ! Component: 1600 - total flux cleaned = -0.00203935 Jy ! Component: 1650 - total flux cleaned = -0.0020498 Jy ! Component: 1700 - total flux cleaned = -0.00207074 Jy ! Component: 1750 - total flux cleaned = -0.00208116 Jy ! Component: 1800 - total flux cleaned = -0.00209142 Jy ! Component: 1850 - total flux cleaned = -0.00211181 Jy ! Component: 1900 - total flux cleaned = -0.00212184 Jy ! Component: 1950 - total flux cleaned = -0.00215167 Jy ! Component: 2000 - total flux cleaned = -0.0021715 Jy ! Component: 2050 - total flux cleaned = -0.0021811 Jy ! Component: 2100 - total flux cleaned = -0.00217128 Jy ! Component: 2150 - total flux cleaned = -0.00217115 Jy ! Component: 2200 - total flux cleaned = -0.0021617 Jy ! Component: 2250 - total flux cleaned = -0.00216168 Jy ! Component: 2300 - total flux cleaned = -0.00209648 Jy ! Component: 2350 - total flux cleaned = -0.00210568 Jy ! Component: 2400 - total flux cleaned = -0.00206903 Jy ! Component: 2450 - total flux cleaned = -0.00203271 Jy ! Component: 2500 - total flux cleaned = -0.00198787 Jy ! Component: 2550 - total flux cleaned = -0.00196996 Jy ! Component: 2600 - total flux cleaned = -0.00196995 Jy ! Component: 2650 - total flux cleaned = -0.00197878 Jy ! Component: 2700 - total flux cleaned = -0.00199611 Jy ! Component: 2750 - total flux cleaned = -0.00195287 Jy ! Component: 2800 - total flux cleaned = -0.0019528 Jy ! Component: 2850 - total flux cleaned = -0.00192728 Jy ! Component: 2900 - total flux cleaned = -0.00190198 Jy ! Component: 2950 - total flux cleaned = -0.00190209 Jy ! Component: 3000 - total flux cleaned = -0.00187707 Jy ! Component: 3050 - total flux cleaned = -0.00185227 Jy ! Component: 3100 - total flux cleaned = -0.00186054 Jy ! Component: 3150 - total flux cleaned = -0.00182796 Jy ! Component: 3200 - total flux cleaned = -0.00179558 Jy ! Component: 3250 - total flux cleaned = -0.00179554 Jy ! Component: 3300 - total flux cleaned = -0.00175572 Jy ! Component: 3350 - total flux cleaned = -0.00173972 Jy ! Component: 3400 - total flux cleaned = -0.00168456 Jy ! Component: 3450 - total flux cleaned = -0.00164558 Jy ! Component: 3500 - total flux cleaned = -0.00161454 Jy ! Component: 3550 - total flux cleaned = -0.00158372 Jy ! Component: 3600 - total flux cleaned = -0.00154547 Jy ! Component: 3650 - total flux cleaned = -0.00153781 Jy ! Component: 3700 - total flux cleaned = -0.0015076 Jy ! Component: 3750 - total flux cleaned = -0.0015076 Jy ! Component: 3800 - total flux cleaned = -0.00147771 Jy ! Component: 3850 - total flux cleaned = -0.00147024 Jy ! Component: 3900 - total flux cleaned = -0.00144072 Jy ! Component: 3950 - total flux cleaned = -0.00142618 Jy ! Component: 4000 - total flux cleaned = -0.00137511 Jy ! Component: 4050 - total flux cleaned = -0.00139687 Jy ! Total flux subtracted in 4096 components = -0.00136076 Jy ! Clean residual min=-0.000492 max=0.000514 Jy/beam ! Clean residual mean=-0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0447209 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 370 components and 0.0447209 Jy ![Exited script file: muppet] wmap "J0002-2153_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.885 x 7.841 at -2.93 degrees (North through East) ! Clean map min=-0.00085717 max=0.038939 Jy/beam ! Writing clean map to FITS file: J0002-2153_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0389392 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131272 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01136 1.01136 2.02272 4.04543 8.09086 16.1817 32.3635 64.7269 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.885 x 7.841 at -2.93 degrees (North through East) ! Clean map min=-0.00085717 max=0.038939 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0002-2153_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:51:53 2019