! Started logfile: /vlbi/uf001/uva//J2358-2853_S_dfm.log on Mon Jan 14 06:57:12 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2358-2853_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2358-2853_S_uva.fits
! AN table 1: 48 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.883102 visibilities/baseline/integration-bin.
! Found source: J2358-2853
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4578 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2358-2853_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001566Jy  sigma=14.408411
! Fit after  self-cal, rms=0.907281Jy  sigma=12.983983
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.299 mas, bmaj=12.67 mas, bpa=13.88 degrees
! Estimated noise=1.03178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.075559 Jy
! Component: 100  -  total flux cleaned = 0.094441 Jy
! Total flux subtracted in 100 components = 0.094441 Jy
! Clean residual min=-0.006179 max=0.008364 Jy/beam
! Clean residual mean=0.000019 rms=0.001774 Jy/beam
! Combined flux in latest and established models = 0.0944411 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0944411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092364Jy  sigma=1.230106
! Fit after  self-cal, rms=0.091858Jy  sigma=1.223901
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.874 mas, bmaj=13.97 mas, bpa=12.29 degrees
! Estimated noise=0.741422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116002 Jy
! Component: 100  -  total flux cleaned = 0.0173375 Jy
! Component: 150  -  total flux cleaned = 0.0197356 Jy
! Component: 200  -  total flux cleaned = 0.0203476 Jy
! Total flux subtracted in 200 components = 0.0203476 Jy
! Clean residual min=-0.005152 max=0.005917 Jy/beam
! Clean residual mean=0.000081 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.114789 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 35 components and 0.114789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090666Jy  sigma=1.199532
! Fit after  self-cal, rms=0.090678Jy  sigma=1.198391
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.874 x 13.97 at 12.29 degrees (North through East)
! Clean map  min=-0.0052435  max=0.097965 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.09     KP        0.96     
!   LA        0.95     NL        1.04     OV        0.95     PT        1.13     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        1.04     KP        1.01     
!   LA        0.94     NL        1.01     OV        0.97     PT        1.03     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.06     KP        1.00     
!   LA        0.97     NL        0.98     OV        1.03     PT        0.93     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.090678Jy  sigma=1.198391
! Fit after  self-cal, rms=0.090038Jy  sigma=1.194462
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.85 mas, bmaj=14.09 mas, bpa=12.77 degrees
! Estimated noise=0.724539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000864223 Jy
! Component: 100  -  total flux cleaned = -0.00143751 Jy
! Component: 150  -  total flux cleaned = -0.00182507 Jy
! Component: 200  -  total flux cleaned = -0.00220132 Jy
! Total flux subtracted in 200 components = -0.00220132 Jy
! Clean residual min=-0.005304 max=0.004731 Jy/beam
! Clean residual mean=0.000079 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 0.112587 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 58 components and 0.112587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.089914Jy  sigma=1.193392
! Fit after  self-cal, rms=0.090014Jy  sigma=1.193102
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090014Jy  sigma=1.193102
! Fit after  self-cal, rms=0.100921Jy  sigma=1.181475
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.834 mas, bmaj=13.97 mas, bpa=12.73 degrees
! Estimated noise=0.726936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011425 Jy
! Component: 100  -  total flux cleaned = -0.000343806 Jy
! Component: 150  -  total flux cleaned = -0.000560446 Jy
! Component: 200  -  total flux cleaned = -0.000651433 Jy
! Total flux subtracted in 200 components = -0.000651433 Jy
! Clean residual min=-0.003569 max=0.003939 Jy/beam
! Clean residual mean=0.000032 rms=0.000991 Jy/beam
! Combined flux in latest and established models = 0.111936 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.111936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100870Jy  sigma=1.180860
! Fit after  self-cal, rms=0.101222Jy  sigma=1.180203
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000321392 Jy
! Component: 100  -  total flux cleaned = -0.000436308 Jy
! Component: 150  -  total flux cleaned = -0.000583266 Jy
! Component: 200  -  total flux cleaned = -0.000627324 Jy
! Total flux subtracted in 200 components = -0.000627324 Jy
! Clean residual min=-0.003563 max=0.003797 Jy/beam
! Clean residual mean=0.000034 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.111309 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 0.111309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101199Jy  sigma=1.180027
! Fit after  self-cal, rms=0.101208Jy  sigma=1.179996
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.101208Jy  sigma=1.179996
! Fit after  self-cal, rms=0.102625Jy  sigma=1.179850
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.823 mas, bmaj=13.94 mas, bpa=12.76 degrees
! Estimated noise=0.72444 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000392477 Jy
! Component: 100  -  total flux cleaned = -0.000562042 Jy
! Component: 150  -  total flux cleaned = -0.000643938 Jy
! Component: 200  -  total flux cleaned = -0.000661198 Jy
! Total flux subtracted in 200 components = -0.000661198 Jy
! Clean residual min=-0.003523 max=0.003791 Jy/beam
! Clean residual mean=0.000030 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.110647 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.110647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102608Jy  sigma=1.179718
! Fit after  self-cal, rms=0.102645Jy  sigma=1.179690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128985 Jy
! Component: 100  -  total flux cleaned = -0.000200362 Jy
! Component: 150  -  total flux cleaned = -0.000184304 Jy
! Component: 200  -  total flux cleaned = -0.000184673 Jy
! Total flux subtracted in 200 components = -0.000184673 Jy
! Clean residual min=-0.003497 max=0.003759 Jy/beam
! Clean residual mean=0.000030 rms=0.000965 Jy/beam
! Combined flux in latest and established models = 0.110463 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.110463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102637Jy  sigma=1.179610
! Fit after  self-cal, rms=0.102641Jy  sigma=1.179601
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102641Jy  sigma=1.179601
! Fit after  self-cal, rms=0.102761Jy  sigma=1.179575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.796 mas, bmaj=19.83 mas, bpa=3.189 degrees
! Estimated noise=0.866147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000191954 Jy
! Component: 100  -  total flux cleaned = -0.000306346 Jy
! Component: 150  -  total flux cleaned = -0.000430634 Jy
! Component: 200  -  total flux cleaned = -0.000520373 Jy
! Total flux subtracted in 200 components = -0.000520373 Jy
! Clean residual min=-0.004676 max=0.005239 Jy/beam
! Clean residual mean=0.000054 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.109942 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 132 components and 0.109942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102753Jy  sigma=1.179561
! Fit after  self-cal, rms=0.102763Jy  sigma=1.179532
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.42307e-05 Jy
! Component: 100  -  total flux cleaned = -0.000114671 Jy
! Component: 150  -  total flux cleaned = -0.000141928 Jy
! Component: 200  -  total flux cleaned = -0.000166616 Jy
! Total flux subtracted in 200 components = -0.000166616 Jy
! Clean residual min=-0.004673 max=0.005196 Jy/beam
! Clean residual mean=0.000054 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.109776 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 141 components and 0.109776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102756Jy  sigma=1.179575
! Fit after  self-cal, rms=0.102758Jy  sigma=1.179560
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.819 mas, bmaj=13.93 mas, bpa=12.79 degrees
! Estimated noise=0.722887 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.819 x 13.93 at 12.79 degrees (North through East)
! Clean map  min=-0.0034269  max=0.096771 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.235 mas, bmaj=12.62 mas, bpa=14.43 degrees
! Estimated noise=1.00347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730081 Jy
! Component: 100  -  total flux cleaned = 0.0932467 Jy
! Component: 150  -  total flux cleaned = 0.104079 Jy
! Component: 200  -  total flux cleaned = 0.110064 Jy
! Total flux subtracted in 200 components = 0.110064 Jy
! Clean residual min=-0.004977 max=0.005099 Jy/beam
! Clean residual mean=0.000007 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.110064 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.110064 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.819 mas, bmaj=13.93 mas, bpa=12.79 degrees
! Estimated noise=0.722887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179116 Jy
! Component: 100  -  total flux cleaned = 0.0017856 Jy
! Component: 150  -  total flux cleaned = 0.0016399 Jy
! Component: 200  -  total flux cleaned = 0.001464 Jy
! Total flux subtracted in 200 components = 0.001464 Jy
! Clean residual min=-0.003757 max=0.003753 Jy/beam
! Clean residual mean=0.000029 rms=0.001001 Jy/beam
! Combined flux in latest and established models = 0.111528 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 34 components and 0.111528 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.796 mas, bmaj=19.83 mas, bpa=3.189 degrees
! Estimated noise=0.866147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000611974 Jy
! Component: 100  -  total flux cleaned = -0.00092171 Jy
! Component: 150  -  total flux cleaned = -0.00109476 Jy
! Component: 200  -  total flux cleaned = -0.00121079 Jy
! Total flux subtracted in 200 components = -0.00121079 Jy
! Clean residual min=-0.004762 max=0.005381 Jy/beam
! Clean residual mean=0.000053 rms=0.001423 Jy/beam
! Combined flux in latest and established models = 0.110318 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.68631e-05 Jy
! Component: 100  -  total flux cleaned = -0.000181369 Jy
! Component: 150  -  total flux cleaned = -0.000260093 Jy
! Component: 200  -  total flux cleaned = -0.000296503 Jy
! Total flux subtracted in 200 components = -0.000296503 Jy
! Clean residual min=-0.004740 max=0.005330 Jy/beam
! Clean residual mean=0.000054 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 0.110021 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 66 components and 0.110021 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.819 mas, bmaj=13.93 mas, bpa=12.79 degrees
! Estimated noise=0.722887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159164 Jy
! Component: 100  -  total flux cleaned = 5.06703e-05 Jy
! Component: 150  -  total flux cleaned = 1.9386e-05 Jy
! Component: 200  -  total flux cleaned = -8.06062e-06 Jy
! Total flux subtracted in 200 components = -8.06062e-06 Jy
! Clean residual min=-0.003726 max=0.003701 Jy/beam
! Clean residual mean=0.000029 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 0.110013 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.110013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102777Jy  sigma=1.180040
! Fit after  self-cal, rms=0.102751Jy  sigma=1.179943
wmodel J2358-2853_S_map.mod
! Writing 86 model components to file: J2358-2853_S_map.mod
wobs   J2358-2853_S_uvs.fits
! Writing UV FITS file: J2358-2853_S_uvs.fits
wwins  J2358-2853_S_map.win
! wwins: Wrote 2 windows to J2358-2853_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.15508e-05 Jy
! Component: 100  -  total flux cleaned = -0.00040423 Jy
! Component: 150  -  total flux cleaned = -0.000237678 Jy
! Component: 200  -  total flux cleaned = 2.5544e-05 Jy
! Component: 250  -  total flux cleaned = 0.000126943 Jy
! Component: 300  -  total flux cleaned = 0.000369909 Jy
! Component: 350  -  total flux cleaned = 0.000557275 Jy
! Component: 400  -  total flux cleaned = 0.000784773 Jy
! Component: 450  -  total flux cleaned = 0.000961444 Jy
! Component: 500  -  total flux cleaned = 0.00113223 Jy
! Component: 550  -  total flux cleaned = 0.00113298 Jy
! Component: 600  -  total flux cleaned = 0.00121464 Jy
! Component: 650  -  total flux cleaned = 0.00113433 Jy
! Component: 700  -  total flux cleaned = 0.00109618 Jy
! Component: 750  -  total flux cleaned = 0.00117178 Jy
! Component: 800  -  total flux cleaned = 0.00106253 Jy
! Component: 850  -  total flux cleaned = 0.00102741 Jy
! Component: 900  -  total flux cleaned = 0.000992753 Jy
! Component: 950  -  total flux cleaned = 0.000924182 Jy
! Component: 1000  -  total flux cleaned = 0.000723578 Jy
! Component: 1050  -  total flux cleaned = 0.00059293 Jy
! Component: 1100  -  total flux cleaned = 0.000464869 Jy
! Component: 1150  -  total flux cleaned = 0.000340266 Jy
! Component: 1200  -  total flux cleaned = 0.000247942 Jy
! Component: 1250  -  total flux cleaned = 0.000157028 Jy
! Component: 1300  -  total flux cleaned = 9.70015e-05 Jy
! Component: 1350  -  total flux cleaned = 9.07205e-06 Jy
! Component: 1400  -  total flux cleaned = -0.000106307 Jy
! Component: 1450  -  total flux cleaned = -0.000106786 Jy
! Component: 1500  -  total flux cleaned = -0.000191088 Jy
! Component: 1550  -  total flux cleaned = -0.000328773 Jy
! Component: 1600  -  total flux cleaned = -0.000463889 Jy
! Component: 1650  -  total flux cleaned = -0.000543819 Jy
! Component: 1700  -  total flux cleaned = -0.00067459 Jy
! Component: 1750  -  total flux cleaned = -0.000776984 Jy
! Component: 1800  -  total flux cleaned = -0.000802268 Jy
! Component: 1850  -  total flux cleaned = -0.000952124 Jy
! Component: 1900  -  total flux cleaned = -0.000976562 Jy
! Component: 1950  -  total flux cleaned = -0.00097676 Jy
! Component: 2000  -  total flux cleaned = -0.00107287 Jy
! Component: 2050  -  total flux cleaned = -0.00114411 Jy
! Component: 2100  -  total flux cleaned = -0.00121394 Jy
! Component: 2150  -  total flux cleaned = -0.00125985 Jy
! Component: 2200  -  total flux cleaned = -0.00132822 Jy
! Component: 2250  -  total flux cleaned = -0.00139566 Jy
! Component: 2300  -  total flux cleaned = -0.00137378 Jy
! Component: 2350  -  total flux cleaned = -0.0014397 Jy
! Component: 2400  -  total flux cleaned = -0.00146136 Jy
! Component: 2450  -  total flux cleaned = -0.00148296 Jy
! Component: 2500  -  total flux cleaned = -0.00148296 Jy
! Component: 2550  -  total flux cleaned = -0.00146204 Jy
! Component: 2600  -  total flux cleaned = -0.00150375 Jy
! Component: 2650  -  total flux cleaned = -0.0015449 Jy
! Component: 2700  -  total flux cleaned = -0.00152467 Jy
! Component: 2750  -  total flux cleaned = -0.00150485 Jy
! Component: 2800  -  total flux cleaned = -0.0015648 Jy
! Component: 2850  -  total flux cleaned = -0.00160433 Jy
! Component: 2900  -  total flux cleaned = -0.0015847 Jy
! Component: 2950  -  total flux cleaned = -0.00164306 Jy
! Component: 3000  -  total flux cleaned = -0.00166246 Jy
! Component: 3050  -  total flux cleaned = -0.00164358 Jy
! Component: 3100  -  total flux cleaned = -0.00171924 Jy
! Component: 3150  -  total flux cleaned = -0.00173807 Jy
! Component: 3200  -  total flux cleaned = -0.00177518 Jy
! Component: 3250  -  total flux cleaned = -0.00179361 Jy
! Component: 3300  -  total flux cleaned = -0.00179359 Jy
! Component: 3350  -  total flux cleaned = -0.00188401 Jy
! Component: 3400  -  total flux cleaned = -0.00190184 Jy
! Component: 3450  -  total flux cleaned = -0.00195508 Jy
! Component: 3500  -  total flux cleaned = -0.00191982 Jy
! Component: 3550  -  total flux cleaned = -0.0019725 Jy
! Component: 3600  -  total flux cleaned = -0.0020072 Jy
! Component: 3650  -  total flux cleaned = -0.00205888 Jy
! Component: 3700  -  total flux cleaned = -0.00212721 Jy
! Component: 3750  -  total flux cleaned = -0.0021779 Jy
! Component: 3800  -  total flux cleaned = -0.0021611 Jy
! Component: 3850  -  total flux cleaned = -0.00226137 Jy
! Component: 3900  -  total flux cleaned = -0.00231116 Jy
! Component: 3950  -  total flux cleaned = -0.0023934 Jy
! Component: 4000  -  total flux cleaned = -0.00247492 Jy
! Component: 4050  -  total flux cleaned = -0.00258834 Jy
! Total flux subtracted in 4096 components = -0.00263664 Jy
! Clean residual min=-0.000905 max=0.000989 Jy/beam
! Clean residual mean=0.000010 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.107376 Jy
keep
! Adding 375 model components to the UV plane model.
! The established model now contains 461 components and 0.107377 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2358-2853_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.819 x 13.93 at 12.79 degrees (North through East)
! Clean map  min=-0.0031043  max=0.095459 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2358-2853_S_map.fits
wmodel /vlbi/uf001/uva//J2358-2853_S_map.mod
! Writing 461 model components to file: /vlbi/uf001/uva//J2358-2853_S_map.mod
wobs   /vlbi/uf001/uva//J2358-2853_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2358-2853_S_uvs.fits
wwins  /vlbi/uf001/uva//J2358-2853_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2358-2853_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0954588 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000328763 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03321 1.03321 2.06642 4.13284 8.26568 16.5314 33.0627 66.1254
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  290.357 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2358-2853_S_dfm.log closed on Mon Jan 14 06:57:17 2019