! Started logfile: /vlbi/uf001/uvm//J2358-1020_X_b_dfm.log on Sun Jan 13 22:47:43 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2358-1020_X_b_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2358-1020_X_b_uvm.fits ! AN table 1: 7 integrations on 28 of 28 possible baselines. ! AN table 2: 7 integrations on 28 of 28 possible baselines. ! AN table 3: 12 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.868132 visibilities/baseline/integration-bin. ! Found source: J2358-1020 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 7584 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2358-1020_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 28 telescope corrections were flagged in sub-array 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.346131Jy sigma=20.370141 ! Fit after self-cal, rms=0.192931Jy sigma=2.902570 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6963 mas, bmaj=3.294 mas, bpa=-17.98 degrees ! Estimated noise=1.0002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.654291 Jy ! Component: 100 - total flux cleaned = 0.806333 Jy ! Total flux subtracted in 100 components = 0.806333 Jy ! Clean residual min=-0.029380 max=0.059349 Jy/beam ! Clean residual mean=0.000053 rms=0.006450 Jy/beam ! Combined flux in latest and established models = 0.806333 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.806333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169579Jy sigma=2.483766 ! Fit after self-cal, rms=0.169571Jy sigma=2.483670 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0638735 Jy ! Component: 100 - total flux cleaned = 0.0971772 Jy ! Total flux subtracted in 100 components = 0.0971772 Jy ! Clean residual min=-0.018759 max=0.033795 Jy/beam ! Clean residual mean=0.000045 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 0.90351 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 14 components and 0.90351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134860Jy sigma=1.947948 ! Fit after self-cal, rms=0.134822Jy sigma=1.947400 ! Inverting map ! Added new window around map position (1.6, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309955 Jy ! Component: 100 - total flux cleaned = 0.0516037 Jy ! Total flux subtracted in 100 components = 0.0516037 Jy ! Clean residual min=-0.017950 max=0.028068 Jy/beam ! Clean residual mean=0.000039 rms=0.004217 Jy/beam ! Combined flux in latest and established models = 0.955114 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.955114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125507Jy sigma=1.804565 ! Fit after self-cal, rms=0.125039Jy sigma=1.796376 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9241 mas, bmaj=3.618 mas, bpa=-16.74 degrees ! Estimated noise=0.738404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232021 Jy ! Component: 100 - total flux cleaned = 0.0393998 Jy ! Component: 150 - total flux cleaned = 0.0511945 Jy ! Component: 200 - total flux cleaned = 0.0596483 Jy ! Total flux subtracted in 200 components = 0.0596483 Jy ! Clean residual min=-0.021498 max=0.023259 Jy/beam ! Clean residual mean=0.000039 rms=0.005267 Jy/beam ! Combined flux in latest and established models = 1.01476 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 1.01476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119408Jy sigma=1.709459 ! Fit after self-cal, rms=0.119170Jy sigma=1.705605 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9241 x 3.618 at -16.74 degrees (North through East) ! Clean map min=-0.021034 max=0.86163 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.95 KP 1.09 LA 0.84 ! MK 1.00 NL 1.21 OV 0.97 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.10 HN 0.98 KP 1.07 ! LA 0.74 NL 1.11 OV 0.95 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.99 HN 0.98 KP 1.05 ! LA 1.04 MK 0.97 NL 1.05 OV 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.95 KP 1.07 LA 0.86 ! MK 1.00 NL 1.20 OV 0.97 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.06 HN 0.97 KP 1.05 ! LA 0.75 NL 1.09 OV 0.96 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 HN 0.97 KP 1.04 ! LA 1.03 MK 0.97 NL 1.06 OV 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.97 KP 1.07 LA 0.87 ! MK 0.99 NL 1.17 OV 0.98 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.07 HN 0.97 KP 1.06 ! LA 0.78 NL 1.10 OV 0.95 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.96 KP 1.03 ! LA 1.03 MK 0.98 NL 1.04 OV 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.96 KP 1.10 LA 0.89 ! MK 1.01 NL 1.18 OV 0.98 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.06 HN 0.99 KP 1.08 ! LA 0.81 NL 1.10 OV 0.95 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 HN 0.99 KP 1.02 ! LA 1.03 MK 0.99 NL 1.05 OV 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.96 KP 1.09 LA 0.89 ! MK 0.99 NL 1.20 OV 0.95 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.09 HN 0.96 KP 1.04 ! LA 0.79 NL 1.09 OV 0.93 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.01 HN 0.97 KP 1.04 ! LA 1.03 MK 0.97 NL 1.06 OV 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.96 KP 1.08 LA 0.85 ! MK 1.00 NL 1.21 OV 0.97 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.06 HN 0.97 KP 1.06 ! LA 0.78 NL 1.08 OV 0.96 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.00 HN 0.96 KP 1.04 ! LA 1.04 MK 1.00 NL 1.06 OV 0.93 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.95 KP 1.09 LA 0.88 ! MK 1.00 NL 1.17 OV 0.96 PT 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.10 HN 0.96 KP 1.08 ! LA 0.76 NL 1.10 OV 0.96 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 HN 1.02 KP 1.05 ! LA 1.03 MK 1.00 NL 1.05 OV 0.93 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.99 KP 1.10 LA 0.86 ! MK 1.00 NL 1.16 OV 0.96 PT 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.07 HN 0.97 KP 1.07 ! LA 0.77 NL 1.09 OV 0.95 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 1.00 KP 1.03 ! LA 1.02 MK 1.01 NL 1.07 OV 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.94 KP 1.07 LA 0.85 ! MK 1.00 NL 1.18 OV 0.99 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.05 HN 1.00 KP 1.04 ! LA 0.78 NL 1.09 OV 0.96 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.02 HN 0.99 KP 1.03 ! LA 1.04 MK 0.99 NL 1.05 OV 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.00 KP 1.07 LA 0.87 ! MK 0.98 NL 1.18 OV 0.96 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.12 HN 0.97 KP 1.08 ! LA 0.78 NL 1.07 OV 0.95 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 1.02 HN 0.97 KP 1.03 ! LA 1.04 MK 1.00 NL 1.08 OV 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.99 KP 1.09 LA 0.87 ! MK 1.00 NL 1.18 OV 0.96 PT 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.06 HN 0.96 KP 1.06 ! LA 0.78 NL 1.10 OV 0.96 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.02 HN 1.00 KP 1.03 ! LA 1.04 MK 1.03 NL 1.04 OV 0.93 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.98 KP 1.07 LA 0.88 ! MK 1.01 NL 1.19 OV 0.96 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.10 HN 0.99 KP 1.05 ! LA 0.78 NL 1.08 OV 0.98 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 HN 0.99 KP 1.05 ! LA 1.05 MK 1.05 NL 1.09 OV 0.93 ! ! ! Fit before self-cal, rms=0.119170Jy sigma=1.705605 ! Fit after self-cal, rms=0.074800Jy sigma=1.067135 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.923 mas, bmaj=3.6 mas, bpa=-16.6 degrees ! Estimated noise=0.738378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0111325 Jy ! Component: 100 - total flux cleaned = -0.0154833 Jy ! Component: 150 - total flux cleaned = -0.0172201 Jy ! Component: 200 - total flux cleaned = -0.0186507 Jy ! Total flux subtracted in 200 components = -0.0186507 Jy ! Clean residual min=-0.008911 max=0.007375 Jy/beam ! Clean residual mean=0.000002 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.996112 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 66 components and 0.996112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072218Jy sigma=1.029221 ! Fit after self-cal, rms=0.072128Jy sigma=1.027289 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072128Jy sigma=1.027289 ! Fit after self-cal, rms=0.066405Jy sigma=0.947001 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9237 mas, bmaj=3.6 mas, bpa=-16.61 degrees ! Estimated noise=0.738127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00784191 Jy ! Component: 100 - total flux cleaned = -0.0108458 Jy ! Component: 150 - total flux cleaned = -0.0115149 Jy ! Component: 200 - total flux cleaned = -0.0124187 Jy ! Total flux subtracted in 200 components = -0.0124187 Jy ! Clean residual min=-0.006069 max=0.004008 Jy/beam ! Clean residual mean=0.000001 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.983693 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.983693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065322Jy sigma=0.931172 ! Fit after self-cal, rms=0.065181Jy sigma=0.929317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197431 Jy ! Component: 100 - total flux cleaned = -0.00255736 Jy ! Component: 150 - total flux cleaned = -0.00306307 Jy ! Component: 200 - total flux cleaned = -0.00351098 Jy ! Total flux subtracted in 200 components = -0.00351098 Jy ! Clean residual min=-0.005556 max=0.004187 Jy/beam ! Clean residual mean=0.000002 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.980182 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.980182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064917Jy sigma=0.925233 ! Fit after self-cal, rms=0.064885Jy sigma=0.924917 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064885Jy sigma=0.924917 ! Fit after self-cal, rms=0.064546Jy sigma=0.918732 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.924 mas, bmaj=3.6 mas, bpa=-16.59 degrees ! Estimated noise=0.737843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00478888 Jy ! Component: 100 - total flux cleaned = -0.00631526 Jy ! Component: 150 - total flux cleaned = -0.0068313 Jy ! Component: 200 - total flux cleaned = -0.00728527 Jy ! Total flux subtracted in 200 components = -0.00728527 Jy ! Clean residual min=-0.004673 max=0.003340 Jy/beam ! Clean residual mean=0.000002 rms=0.000907 Jy/beam ! Combined flux in latest and established models = 0.972897 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.972897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064116Jy sigma=0.912378 ! Fit after self-cal, rms=0.064065Jy sigma=0.911722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130299 Jy ! Component: 100 - total flux cleaned = -0.0017042 Jy ! Component: 150 - total flux cleaned = -0.00206517 Jy ! Component: 200 - total flux cleaned = -0.00233614 Jy ! Total flux subtracted in 200 components = -0.00233614 Jy ! Clean residual min=-0.004400 max=0.003168 Jy/beam ! Clean residual mean=0.000002 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.970561 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.970561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063939Jy sigma=0.909839 ! Fit after self-cal, rms=0.063927Jy sigma=0.909713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063927Jy sigma=0.909713 ! Fit after self-cal, rms=0.063791Jy sigma=0.907145 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.102 mas, bmaj=4.227 mas, bpa=-5.157 degrees ! Estimated noise=0.911566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030432 Jy ! Component: 100 - total flux cleaned = -0.00403098 Jy ! Component: 150 - total flux cleaned = -0.00440337 Jy ! Component: 200 - total flux cleaned = -0.00467876 Jy ! Total flux subtracted in 200 components = -0.00467876 Jy ! Clean residual min=-0.004757 max=0.003700 Jy/beam ! Clean residual mean=0.000004 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.965882 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 114 components and 0.965882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063702Jy sigma=0.905873 ! Fit after self-cal, rms=0.063679Jy sigma=0.905559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678505 Jy ! Component: 100 - total flux cleaned = -0.000962774 Jy ! Component: 150 - total flux cleaned = -0.00107093 Jy ! Component: 200 - total flux cleaned = -0.00114413 Jy ! Total flux subtracted in 200 components = -0.00114413 Jy ! Clean residual min=-0.004489 max=0.003728 Jy/beam ! Clean residual mean=0.000005 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.964738 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 0.964738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063650Jy sigma=0.905144 ! Fit after self-cal, rms=0.063649Jy sigma=0.905077 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9243 mas, bmaj=3.6 mas, bpa=-16.57 degrees ! Estimated noise=0.737646 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9243 x 3.6 at -16.57 degrees (North through East) ! Clean map min=-0.0034865 max=0.86331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063649Jy sigma=0.905077 ! Fit after self-cal, rms=0.060201Jy sigma=0.839610 ! Inverting map and beam ! Estimated beam: bmin=0.9247 mas, bmaj=3.6 mas, bpa=-16.57 degrees ! Estimated noise=0.737713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195505 Jy ! Component: 100 - total flux cleaned = -0.00272294 Jy ! Component: 150 - total flux cleaned = -0.00313707 Jy ! Component: 200 - total flux cleaned = -0.00313565 Jy ! Total flux subtracted in 200 components = -0.00313565 Jy ! Clean residual min=-0.003326 max=0.002726 Jy/beam ! Clean residual mean=0.000003 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.961602 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 126 components and 0.961602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060046Jy sigma=0.837151 ! Fit after self-cal, rms=0.060036Jy sigma=0.837033 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365853 Jy ! Component: 100 - total flux cleaned = -0.000465847 Jy ! Component: 150 - total flux cleaned = -0.000465944 Jy ! Component: 200 - total flux cleaned = -0.000510512 Jy ! Total flux subtracted in 200 components = -0.000510512 Jy ! Clean residual min=-0.003196 max=0.002630 Jy/beam ! Clean residual mean=0.000003 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.961092 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.961092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059966Jy sigma=0.835939 ! Fit after self-cal, rms=0.059963Jy sigma=0.835899 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059963Jy sigma=0.835899 ! Fit after self-cal, rms=0.059923Jy sigma=0.835244 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=3.279 mas, bpa=-17.85 degrees ! Estimated noise=0.999287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.652904 Jy ! Component: 100 - total flux cleaned = 0.804114 Jy ! Component: 150 - total flux cleaned = 0.867853 Jy ! Component: 200 - total flux cleaned = 0.900762 Jy ! Total flux subtracted in 200 components = 0.900762 Jy ! Clean residual min=-0.008333 max=0.015588 Jy/beam ! Clean residual mean=0.000011 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 0.900762 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.900762 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=3.6 mas, bpa=-16.56 degrees ! Estimated noise=0.737365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225256 Jy ! Component: 100 - total flux cleaned = 0.0341379 Jy ! Component: 150 - total flux cleaned = 0.0415882 Jy ! Component: 200 - total flux cleaned = 0.0467553 Jy ! Total flux subtracted in 200 components = 0.0467553 Jy ! Clean residual min=-0.003667 max=0.003875 Jy/beam ! Clean residual mean=0.000007 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.947517 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.947517 Jy ! Inverting map ! Added new window around map position (-16.2, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402846 Jy ! Component: 100 - total flux cleaned = 0.00638031 Jy ! Component: 150 - total flux cleaned = 0.00819661 Jy ! Component: 200 - total flux cleaned = 0.00970087 Jy ! Total flux subtracted in 200 components = 0.00970087 Jy ! Clean residual min=-0.003139 max=0.002556 Jy/beam ! Clean residual mean=0.000004 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.957218 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.957218 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=4.227 mas, bpa=-5.11 degrees ! Estimated noise=0.910587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248762 Jy ! Component: 100 - total flux cleaned = 0.00410999 Jy ! Component: 150 - total flux cleaned = 0.00539753 Jy ! Component: 200 - total flux cleaned = 0.00636678 Jy ! Total flux subtracted in 200 components = 0.00636678 Jy ! Clean residual min=-0.003733 max=0.003043 Jy/beam ! Clean residual mean=0.000004 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.963585 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500022 Jy ! Component: 100 - total flux cleaned = 0.000881294 Jy ! Component: 150 - total flux cleaned = 0.00119815 Jy ! Component: 200 - total flux cleaned = 0.00146221 Jy ! Total flux subtracted in 200 components = 0.00146221 Jy ! Clean residual min=-0.003708 max=0.002962 Jy/beam ! Clean residual mean=0.000003 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.965047 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 95 components and 0.965047 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9248 mas, bmaj=3.6 mas, bpa=-16.56 degrees ! Estimated noise=0.737365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000534595 Jy ! Component: 100 - total flux cleaned = -0.000335027 Jy ! Component: 150 - total flux cleaned = -0.00021527 Jy ! Component: 200 - total flux cleaned = -5.28071e-05 Jy ! Total flux subtracted in 200 components = -5.28071e-05 Jy ! Clean residual min=-0.002820 max=0.002635 Jy/beam ! Clean residual mean=0.000002 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.964994 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 0.964994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059701Jy sigma=0.832453 ! Fit after self-cal, rms=0.059666Jy sigma=0.831964 wmodel J2358-1020_X_b_map.mod ! Writing 108 model components to file: J2358-1020_X_b_map.mod wobs J2358-1020_X_b_uvs.fits ! Writing UV FITS file: J2358-1020_X_b_uvs.fits wwins J2358-1020_X_b_map.win ! wwins: Wrote 3 windows to J2358-1020_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000571172 Jy ! Component: 100 - total flux cleaned = -0.000710089 Jy ! Component: 150 - total flux cleaned = -0.000840154 Jy ! Component: 200 - total flux cleaned = -0.000840194 Jy ! Component: 250 - total flux cleaned = -0.000840453 Jy ! Component: 300 - total flux cleaned = -0.000918007 Jy ! Component: 350 - total flux cleaned = -0.0010688 Jy ! Component: 400 - total flux cleaned = -0.00114324 Jy ! Component: 450 - total flux cleaned = -0.00132361 Jy ! Component: 500 - total flux cleaned = -0.001288 Jy ! Component: 550 - total flux cleaned = -0.00125383 Jy ! Component: 600 - total flux cleaned = -0.00125385 Jy ! Component: 650 - total flux cleaned = -0.00118712 Jy ! Component: 700 - total flux cleaned = -0.00105665 Jy ! Component: 750 - total flux cleaned = -0.00089581 Jy ! Component: 800 - total flux cleaned = -0.000800541 Jy ! Component: 850 - total flux cleaned = -0.000768464 Jy ! Component: 900 - total flux cleaned = -0.000644819 Jy ! Component: 950 - total flux cleaned = -0.000523282 Jy ! Component: 1000 - total flux cleaned = -0.000343703 Jy ! Component: 1050 - total flux cleaned = -0.000373739 Jy ! Component: 1100 - total flux cleaned = -0.000373198 Jy ! Component: 1150 - total flux cleaned = -0.000344226 Jy ! Component: 1200 - total flux cleaned = -0.000201285 Jy ! Component: 1250 - total flux cleaned = -0.000258275 Jy ! Component: 1300 - total flux cleaned = -0.000314252 Jy ! Component: 1350 - total flux cleaned = -0.000230661 Jy ! Component: 1400 - total flux cleaned = -6.59049e-05 Jy ! Component: 1450 - total flux cleaned = -0.000120647 Jy ! Component: 1500 - total flux cleaned = -6.69426e-05 Jy ! Component: 1550 - total flux cleaned = -0.000147516 Jy ! Component: 1600 - total flux cleaned = -0.000200521 Jy ! Component: 1650 - total flux cleaned = -0.000200103 Jy ! Component: 1700 - total flux cleaned = -0.00019965 Jy ! Component: 1750 - total flux cleaned = -0.000225083 Jy ! Component: 1800 - total flux cleaned = -9.65648e-05 Jy ! Component: 1850 - total flux cleaned = -0.000198327 Jy ! Component: 1900 - total flux cleaned = -0.000122464 Jy ! Component: 1950 - total flux cleaned = -0.000122461 Jy ! Component: 2000 - total flux cleaned = -0.000197536 Jy ! Component: 2050 - total flux cleaned = -0.000247069 Jy ! Component: 2100 - total flux cleaned = -0.000124341 Jy ! Component: 2150 - total flux cleaned = -0.000197956 Jy ! Component: 2200 - total flux cleaned = -0.000246463 Jy ! Component: 2250 - total flux cleaned = -0.000318502 Jy ! Component: 2300 - total flux cleaned = -0.000389781 Jy ! Component: 2350 - total flux cleaned = -0.0003661 Jy ! Component: 2400 - total flux cleaned = -0.000483852 Jy ! Component: 2450 - total flux cleaned = -0.000437426 Jy ! Component: 2500 - total flux cleaned = -0.0005302 Jy ! Component: 2550 - total flux cleaned = -0.000599272 Jy ! Component: 2600 - total flux cleaned = -0.000553111 Jy ! Component: 2650 - total flux cleaned = -0.000598465 Jy ! Component: 2700 - total flux cleaned = -0.000598287 Jy ! Component: 2750 - total flux cleaned = -0.000643361 Jy ! Component: 2800 - total flux cleaned = -0.000687804 Jy ! Component: 2850 - total flux cleaned = -0.000643334 Jy ! Component: 2900 - total flux cleaned = -0.000731762 Jy ! Component: 2950 - total flux cleaned = -0.000753725 Jy ! Component: 3000 - total flux cleaned = -0.00079741 Jy ! Component: 3050 - total flux cleaned = -0.000710569 Jy ! Component: 3100 - total flux cleaned = -0.000840285 Jy ! Component: 3150 - total flux cleaned = -0.000883373 Jy ! Component: 3200 - total flux cleaned = -0.000925905 Jy ! Component: 3250 - total flux cleaned = -0.00103193 Jy ! Component: 3300 - total flux cleaned = -0.000989803 Jy ! Component: 3350 - total flux cleaned = -0.00101083 Jy ! Component: 3400 - total flux cleaned = -0.00103168 Jy ! Component: 3450 - total flux cleaned = -0.00105236 Jy ! Component: 3500 - total flux cleaned = -0.000990566 Jy ! Component: 3550 - total flux cleaned = -0.00103178 Jy ! Component: 3600 - total flux cleaned = -0.00115417 Jy ! Component: 3650 - total flux cleaned = -0.00117465 Jy ! Component: 3700 - total flux cleaned = -0.00111389 Jy ! Component: 3750 - total flux cleaned = -0.0011339 Jy ! Component: 3800 - total flux cleaned = -0.00111407 Jy ! Component: 3850 - total flux cleaned = -0.00119348 Jy ! Component: 3900 - total flux cleaned = -0.00119354 Jy ! Component: 3950 - total flux cleaned = -0.00119348 Jy ! Component: 4000 - total flux cleaned = -0.00117397 Jy ! Component: 4050 - total flux cleaned = -0.00121284 Jy ! Total flux subtracted in 4096 components = -0.00119341 Jy ! Clean residual min=-0.001187 max=0.001203 Jy/beam ! Clean residual mean=0.000001 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.9638 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 401 components and 0.9638 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2358-1020_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9248 x 3.6 at -16.56 degrees (North through East) ! Clean map min=-0.0018262 max=0.86727 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2358-1020_X_b_map.fits wmodel /vlbi/uf001/uvm//J2358-1020_X_b_map.mod ! Writing 401 model components to file: /vlbi/uf001/uvm//J2358-1020_X_b_map.mod wobs /vlbi/uf001/uvm//J2358-1020_X_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2358-1020_X_b_uvs.fits wwins /vlbi/uf001/uvm//J2358-1020_X_b_map.win ! wwins: Wrote 4 windows to /vlbi/uf001/uvm//J2358-1020_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.867274 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000351258 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.121504 0.121504 0.243008 0.486016 0.972033 1.94407 3.88813 7.77626 15.5525 31.105 62.2101 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.867 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2469.05 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2358-1020_X_b_dfm.log closed on Sun Jan 13 22:47:48 2019