! Started logfile: /vlbi/uf001/uva//J2352+3947_S_dfm.log on Mon Jan 14 06:54:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2352+3947_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2352+3947_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.968811 visibilities/baseline/integration-bin.
! Found source: J2352+3947
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7455 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2352+3947_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011939Jy  sigma=24.733727
! Fit after  self-cal, rms=0.828625Jy  sigma=20.225834
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.919 mas, bmaj=5.307 mas, bpa=-0.2215 degrees
! Estimated noise=0.481678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130927 Jy
! Component: 100  -  total flux cleaned = 0.161955 Jy
! Total flux subtracted in 100 components = 0.161955 Jy
! Clean residual min=-0.005502 max=0.013007 Jy/beam
! Clean residual mean=0.000011 rms=0.001547 Jy/beam
! Combined flux in latest and established models = 0.161955 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.161955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062348Jy  sigma=1.470741
! Fit after  self-cal, rms=0.062313Jy  sigma=1.470079
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142356 Jy
! Component: 100  -  total flux cleaned = 0.0219461 Jy
! Total flux subtracted in 100 components = 0.0219461 Jy
! Clean residual min=-0.004449 max=0.008530 Jy/beam
! Clean residual mean=0.000005 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.183901 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.183901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058360Jy  sigma=1.369571
! Fit after  self-cal, rms=0.058322Jy  sigma=1.368794
! Inverting map 
! Added new window around map position (4.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00780973 Jy
! Component: 100  -  total flux cleaned = 0.0120235 Jy
! Total flux subtracted in 100 components = 0.0120235 Jy
! Clean residual min=-0.003772 max=0.004874 Jy/beam
! Clean residual mean=0.000003 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.195924 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.195924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057180Jy  sigma=1.338907
! Fit after  self-cal, rms=0.057105Jy  sigma=1.337086
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.438 mas, bmaj=6.11 mas, bpa=0.197 degrees
! Estimated noise=0.343757 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0041245 Jy
! Component: 100  -  total flux cleaned = 0.00646465 Jy
! Component: 150  -  total flux cleaned = 0.00803959 Jy
! Component: 200  -  total flux cleaned = 0.00910795 Jy
! Total flux subtracted in 200 components = 0.00910795 Jy
! Clean residual min=-0.003209 max=0.004589 Jy/beam
! Clean residual mean=0.000003 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.205032 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 44 components and 0.205032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056806Jy  sigma=1.328618
! Fit after  self-cal, rms=0.056778Jy  sigma=1.327813
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.438 x 6.11 at 0.197 degrees (North through East)
! Clean map  min=-0.0032257  max=0.17046 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        0.98     KP        1.05     
!   LA        0.93     MK        0.99     NL        1.07     OV        0.99     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        0.99     KP        1.04     
!   LA        0.95     MK        1.03     NL        1.09     OV        1.02     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.98     KP        1.02     
!   LA        0.93     MK        1.04     NL        1.12     OV        0.99     
!   PT        1.02     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.056778Jy  sigma=1.327813
! Fit after  self-cal, rms=0.055879Jy  sigma=1.300743
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.445 mas, bmaj=6.12 mas, bpa=0.4668 degrees
! Estimated noise=0.343408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0012358 Jy
! Component: 100  -  total flux cleaned = -0.0012787 Jy
! Component: 150  -  total flux cleaned = -0.00133444 Jy
! Component: 200  -  total flux cleaned = -0.00141029 Jy
! Total flux subtracted in 200 components = -0.00141029 Jy
! Clean residual min=-0.001982 max=0.002131 Jy/beam
! Clean residual mean=0.000010 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.203622 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 59 components and 0.203622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055826Jy  sigma=1.299364
! Fit after  self-cal, rms=0.055851Jy  sigma=1.299136
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055851Jy  sigma=1.299136
! Fit after  self-cal, rms=0.055289Jy  sigma=1.288565
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.452 mas, bmaj=6.106 mas, bpa=0.05978 degrees
! Estimated noise=0.342961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000354792 Jy
! Component: 100  -  total flux cleaned = -0.000435076 Jy
! Component: 150  -  total flux cleaned = -0.000453051 Jy
! Component: 200  -  total flux cleaned = -0.000486176 Jy
! Total flux subtracted in 200 components = -0.000486176 Jy
! Clean residual min=-0.001745 max=0.001920 Jy/beam
! Clean residual mean=0.000001 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.203136 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.203136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055276Jy  sigma=1.288215
! Fit after  self-cal, rms=0.055279Jy  sigma=1.288171
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (83, -17).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000810079 Jy
! Component: 100  -  total flux cleaned = 0.000587973 Jy
! Component: 150  -  total flux cleaned = 0.000559909 Jy
! Component: 200  -  total flux cleaned = 0.000561338 Jy
! Total flux subtracted in 200 components = 0.000561338 Jy
! Clean residual min=-0.001670 max=0.001418 Jy/beam
! Clean residual mean=0.000001 rms=0.000397 Jy/beam
! Combined flux in latest and established models = 0.203697 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.203697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055221Jy  sigma=1.286586
! Fit after  self-cal, rms=0.055218Jy  sigma=1.286502
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055218Jy  sigma=1.286502
! Fit after  self-cal, rms=0.055156Jy  sigma=1.286370
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.105 mas, bpa=0.04646 degrees
! Estimated noise=0.34252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.14503e-05 Jy
! Component: 100  -  total flux cleaned = -2.18735e-05 Jy
! Component: 150  -  total flux cleaned = -6.13412e-05 Jy
! Component: 200  -  total flux cleaned = -7.95185e-05 Jy
! Total flux subtracted in 200 components = -7.95185e-05 Jy
! Clean residual min=-0.001641 max=0.001502 Jy/beam
! Clean residual mean=0.000000 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.203618 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 106 components and 0.203618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055142Jy  sigma=1.285973
! Fit after  self-cal, rms=0.055142Jy  sigma=1.285959
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.92518e-05 Jy
! Component: 100  -  total flux cleaned = -5.964e-05 Jy
! Component: 150  -  total flux cleaned = -7.57521e-05 Jy
! Component: 200  -  total flux cleaned = -9.07911e-05 Jy
! Total flux subtracted in 200 components = -9.07911e-05 Jy
! Clean residual min=-0.001610 max=0.001523 Jy/beam
! Clean residual mean=0.000000 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.203527 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 114 components and 0.203527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055134Jy  sigma=1.285737
! Fit after  self-cal, rms=0.055134Jy  sigma=1.285733
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055134Jy  sigma=1.285733
! Fit after  self-cal, rms=0.055086Jy  sigma=1.285717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.29 mas, bmaj=9.387 mas, bpa=0.6347 degrees
! Estimated noise=0.437578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000555168 Jy
! Component: 100  -  total flux cleaned = 0.00056964 Jy
! Component: 150  -  total flux cleaned = 0.000546242 Jy
! Component: 200  -  total flux cleaned = 0.00052546 Jy
! Total flux subtracted in 200 components = 0.00052546 Jy
! Clean residual min=-0.001731 max=0.001612 Jy/beam
! Clean residual mean=0.000000 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.204052 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 125 components and 0.204052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055084Jy  sigma=1.285739
! Fit after  self-cal, rms=0.055084Jy  sigma=1.285721
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114505 Jy
! Component: 100  -  total flux cleaned = 8.70762e-05 Jy
! Component: 150  -  total flux cleaned = 6.27699e-05 Jy
! Component: 200  -  total flux cleaned = 5.55761e-05 Jy
! Total flux subtracted in 200 components = 5.55761e-05 Jy
! Clean residual min=-0.001740 max=0.001606 Jy/beam
! Clean residual mean=0.000000 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.204108 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 130 components and 0.204108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055084Jy  sigma=1.285752
! Fit after  self-cal, rms=0.055085Jy  sigma=1.285749
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.107 mas, bpa=0.04348 degrees
! Estimated noise=0.342254 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.453 x 6.107 at 0.04348 degrees (North through East)
! Clean map  min=-0.0015801  max=0.16999 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.927 mas, bmaj=5.298 mas, bpa=-0.4413 degrees
! Estimated noise=0.478749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129993 Jy
! Component: 100  -  total flux cleaned = 0.16128 Jy
! Component: 150  -  total flux cleaned = 0.176063 Jy
! Component: 200  -  total flux cleaned = 0.184698 Jy
! Total flux subtracted in 200 components = 0.184698 Jy
! Clean residual min=-0.003046 max=0.004437 Jy/beam
! Clean residual mean=0.000005 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.184698 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.184698 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.107 mas, bpa=0.04348 degrees
! Estimated noise=0.342254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00670094 Jy
! Component: 100  -  total flux cleaned = 0.0105897 Jy
! Component: 150  -  total flux cleaned = 0.0132237 Jy
! Component: 200  -  total flux cleaned = 0.0147055 Jy
! Total flux subtracted in 200 components = 0.0147055 Jy
! Clean residual min=-0.001773 max=0.001630 Jy/beam
! Clean residual mean=0.000000 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.199403 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 56 components and 0.199403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.29 mas, bmaj=9.387 mas, bpa=0.6347 degrees
! Estimated noise=0.437578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216202 Jy
! Component: 100  -  total flux cleaned = 0.00289156 Jy
! Component: 150  -  total flux cleaned = 0.00325429 Jy
! Component: 200  -  total flux cleaned = 0.00352116 Jy
! Total flux subtracted in 200 components = 0.00352116 Jy
! Clean residual min=-0.001676 max=0.001599 Jy/beam
! Clean residual mean=0.000001 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.202924 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109928 Jy
! Component: 100  -  total flux cleaned = 0.000222781 Jy
! Component: 150  -  total flux cleaned = 0.00032405 Jy
! Component: 200  -  total flux cleaned = 0.000415151 Jy
! Total flux subtracted in 200 components = 0.000415151 Jy
! Clean residual min=-0.001672 max=0.001561 Jy/beam
! Clean residual mean=0.000000 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.203339 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 86 components and 0.203339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=6.107 mas, bpa=0.04348 degrees
! Estimated noise=0.342254 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.12289e-05 Jy
! Component: 100  -  total flux cleaned = 1.888e-05 Jy
! Component: 150  -  total flux cleaned = -1.30263e-05 Jy
! Component: 200  -  total flux cleaned = -1.5036e-05 Jy
! Total flux subtracted in 200 components = -1.5036e-05 Jy
! Clean residual min=-0.001723 max=0.001477 Jy/beam
! Clean residual mean=0.000000 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.203324 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 105 components and 0.203324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055113Jy  sigma=1.286427
! Fit after  self-cal, rms=0.055104Jy  sigma=1.286201
wmodel J2352+3947_S_map.mod
! Writing 105 model components to file: J2352+3947_S_map.mod
wobs   J2352+3947_S_uvs.fits
! Writing UV FITS file: J2352+3947_S_uvs.fits
wwins  J2352+3947_S_map.win
! wwins: Wrote 3 windows to J2352+3947_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000506969 Jy
! Component: 100  -  total flux cleaned = -0.000720089 Jy
! Component: 150  -  total flux cleaned = -0.000845925 Jy
! Component: 200  -  total flux cleaned = -0.00104036 Jy
! Component: 250  -  total flux cleaned = -0.00122956 Jy
! Component: 300  -  total flux cleaned = -0.00139071 Jy
! Component: 350  -  total flux cleaned = -0.00154867 Jy
! Component: 400  -  total flux cleaned = -0.00163675 Jy
! Component: 450  -  total flux cleaned = -0.00172354 Jy
! Component: 500  -  total flux cleaned = -0.00187162 Jy
! Component: 550  -  total flux cleaned = -0.00199626 Jy
! Component: 600  -  total flux cleaned = -0.00209873 Jy
! Component: 650  -  total flux cleaned = -0.00226018 Jy
! Component: 700  -  total flux cleaned = -0.0023396 Jy
! Component: 750  -  total flux cleaned = -0.0024376 Jy
! Component: 800  -  total flux cleaned = -0.00263092 Jy
! Component: 850  -  total flux cleaned = -0.00274516 Jy
! Component: 900  -  total flux cleaned = -0.00287668 Jy
! Component: 950  -  total flux cleaned = -0.00296935 Jy
! Component: 1000  -  total flux cleaned = -0.00313386 Jy
! Component: 1050  -  total flux cleaned = -0.00316991 Jy
! Component: 1100  -  total flux cleaned = -0.00333034 Jy
! Component: 1150  -  total flux cleaned = -0.00343573 Jy
! Component: 1200  -  total flux cleaned = -0.00345309 Jy
! Component: 1250  -  total flux cleaned = -0.00353894 Jy
! Component: 1300  -  total flux cleaned = -0.00362388 Jy
! Component: 1350  -  total flux cleaned = -0.00369079 Jy
! Component: 1400  -  total flux cleaned = -0.00377359 Jy
! Component: 1450  -  total flux cleaned = -0.00382252 Jy
! Component: 1500  -  total flux cleaned = -0.00388748 Jy
! Component: 1550  -  total flux cleaned = -0.00396776 Jy
! Component: 1600  -  total flux cleaned = -0.00411051 Jy
! Component: 1650  -  total flux cleaned = -0.00407905 Jy
! Component: 1700  -  total flux cleaned = -0.00418813 Jy
! Component: 1750  -  total flux cleaned = -0.0042341 Jy
! Component: 1800  -  total flux cleaned = -0.00434077 Jy
! Component: 1850  -  total flux cleaned = -0.00437094 Jy
! Component: 1900  -  total flux cleaned = -0.00441556 Jy
! Component: 1950  -  total flux cleaned = -0.00447485 Jy
! Component: 2000  -  total flux cleaned = -0.00456293 Jy
! Component: 2050  -  total flux cleaned = -0.00462121 Jy
! Component: 2100  -  total flux cleaned = -0.00465016 Jy
! Component: 2150  -  total flux cleaned = -0.00472154 Jy
! Component: 2200  -  total flux cleaned = -0.0047075 Jy
! Component: 2250  -  total flux cleaned = -0.00477775 Jy
! Component: 2300  -  total flux cleaned = -0.00487525 Jy
! Component: 2350  -  total flux cleaned = -0.00483374 Jy
! Component: 2400  -  total flux cleaned = -0.00494328 Jy
! Component: 2450  -  total flux cleaned = -0.00497052 Jy
! Component: 2500  -  total flux cleaned = -0.00501106 Jy
! Component: 2550  -  total flux cleaned = -0.00497082 Jy
! Component: 2600  -  total flux cleaned = -0.00499763 Jy
! Component: 2650  -  total flux cleaned = -0.00507672 Jy
! Component: 2700  -  total flux cleaned = -0.00510293 Jy
! Component: 2750  -  total flux cleaned = -0.00508991 Jy
! Component: 2800  -  total flux cleaned = -0.00514151 Jy
! Component: 2850  -  total flux cleaned = -0.00521796 Jy
! Component: 2900  -  total flux cleaned = -0.00524328 Jy
! Component: 2950  -  total flux cleaned = -0.00530626 Jy
! Component: 3000  -  total flux cleaned = -0.00529374 Jy
! Component: 3050  -  total flux cleaned = -0.00529375 Jy
! Component: 3100  -  total flux cleaned = -0.0053432 Jy
! Component: 3150  -  total flux cleaned = -0.00537967 Jy
! Component: 3200  -  total flux cleaned = -0.00545235 Jy
! Component: 3250  -  total flux cleaned = -0.00541615 Jy
! Component: 3300  -  total flux cleaned = -0.00541616 Jy
! Component: 3350  -  total flux cleaned = -0.00540423 Jy
! Component: 3400  -  total flux cleaned = -0.00541608 Jy
! Component: 3450  -  total flux cleaned = -0.00538093 Jy
! Component: 3500  -  total flux cleaned = -0.00540421 Jy
! Component: 3550  -  total flux cleaned = -0.0054156 Jy
! Component: 3600  -  total flux cleaned = -0.00538118 Jy
! Component: 3650  -  total flux cleaned = -0.00540411 Jy
! Component: 3700  -  total flux cleaned = -0.00542677 Jy
! Component: 3750  -  total flux cleaned = -0.00538179 Jy
! Component: 3800  -  total flux cleaned = -0.00541532 Jy
! Component: 3850  -  total flux cleaned = -0.00542649 Jy
! Component: 3900  -  total flux cleaned = -0.00547063 Jy
! Component: 3950  -  total flux cleaned = -0.00547069 Jy
! Component: 4000  -  total flux cleaned = -0.00545984 Jy
! Component: 4050  -  total flux cleaned = -0.00548153 Jy
! Total flux subtracted in 4096 components = -0.00551387 Jy
! Clean residual min=-0.000622 max=0.000678 Jy/beam
! Clean residual mean=0.000001 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.197811 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 397 components and 0.19781 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2352+3947_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.453 x 6.107 at 0.04348 degrees (North through East)
! Clean map  min=-0.0011249  max=0.1701 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2352+3947_S_map.fits
wmodel /vlbi/uf001/uva//J2352+3947_S_map.mod
! Writing 397 model components to file: /vlbi/uf001/uva//J2352+3947_S_map.mod
wobs   /vlbi/uf001/uva//J2352+3947_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2352+3947_S_uvs.fits
wwins  /vlbi/uf001/uva//J2352+3947_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2352+3947_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.170099 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00019959 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.352013 0.352013 0.704025 1.40805 2.8161 5.6322 11.2644 22.5288 45.0576 90.1152
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.17 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  852.242 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2352+3947_S_dfm.log closed on Mon Jan 14 06:54:48 2019