! Started logfile: /vlbi/uf001/uva//J2350+0227_S_a_dfm.log on Mon Jan 14 06:53:13 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2350+0227_S_a_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2350+0227_S_a_uva.fits
! AN table 1: 110 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.915909 visibilities/baseline/integration-bin.
! Found source: J2350+0227
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 8463 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2350+0227_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 52 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001586Jy  sigma=19.882266
! Fit after  self-cal, rms=0.956306Jy  sigma=18.969422
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.38 mas, bmaj=12.14 mas, bpa=-4.542 degrees
! Estimated noise=0.480138 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357931 Jy
! Component: 100  -  total flux cleaned = 0.0436066 Jy
! Total flux subtracted in 100 components = 0.0436066 Jy
! Clean residual min=-0.002871 max=0.002393 Jy/beam
! Clean residual mean=-0.000002 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.0436066 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0436066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062323Jy  sigma=1.205477
! Fit after  self-cal, rms=0.060934Jy  sigma=1.175771
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.09 mas, bmaj=12.83 mas, bpa=-5.845 degrees
! Estimated noise=0.395168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00343261 Jy
! Component: 100  -  total flux cleaned = 0.00460555 Jy
! Component: 150  -  total flux cleaned = 0.00460596 Jy
! Component: 200  -  total flux cleaned = 0.00458093 Jy
! Total flux subtracted in 200 components = 0.00458093 Jy
! Clean residual min=-0.001844 max=0.001744 Jy/beam
! Clean residual mean=-0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.0481875 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 25 components and 0.0481875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060767Jy  sigma=1.172122
! Fit after  self-cal, rms=0.060765Jy  sigma=1.172003
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.09 x 12.83 at -5.845 degrees (North through East)
! Clean map  min=-0.0018164  max=0.047706 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.92     KP        0.98     
!   LA        0.95     NL        1.13     OV        0.97     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        0.90     KP        0.95     
!   LA        0.90     NL        1.11     OV        1.10     PT        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        1.02     KP        1.04     
!   LA        1.02     NL        0.98     OV        1.00     PT        1.08     
! 
! 
! Fit before self-cal, rms=0.060765Jy  sigma=1.172003
! Fit after  self-cal, rms=0.060760Jy  sigma=1.169206
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.011 mas, bmaj=12.88 mas, bpa=-6.324 degrees
! Estimated noise=0.393099 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.56781e-05 Jy
! Component: 100  -  total flux cleaned = -6.70653e-05 Jy
! Component: 150  -  total flux cleaned = -0.000144949 Jy
! Component: 200  -  total flux cleaned = -0.000199153 Jy
! Total flux subtracted in 200 components = -0.000199153 Jy
! Clean residual min=-0.001695 max=0.001816 Jy/beam
! Clean residual mean=-0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0479883 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.0479884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060749Jy  sigma=1.168980
! Fit after  self-cal, rms=0.060816Jy  sigma=1.168364
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060816Jy  sigma=1.168364
! Fit after  self-cal, rms=0.061231Jy  sigma=1.166322
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.031 mas, bmaj=12.9 mas, bpa=-6.476 degrees
! Estimated noise=0.394134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000252865 Jy
! Component: 100  -  total flux cleaned = -0.000294978 Jy
! Component: 150  -  total flux cleaned = -0.000295249 Jy
! Component: 200  -  total flux cleaned = -0.000302229 Jy
! Total flux subtracted in 200 components = -0.000302229 Jy
! Clean residual min=-0.001603 max=0.001808 Jy/beam
! Clean residual mean=-0.000002 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0476861 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 0.0476861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061228Jy  sigma=1.166258
! Fit after  self-cal, rms=0.061254Jy  sigma=1.165876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (90.5, -117.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120171 Jy
! Component: 100  -  total flux cleaned = 0.000995945 Jy
! Component: 150  -  total flux cleaned = 0.000871642 Jy
! Component: 200  -  total flux cleaned = 0.000745139 Jy
! Total flux subtracted in 200 components = 0.000745139 Jy
! Clean residual min=-0.001501 max=0.001327 Jy/beam
! Clean residual mean=-0.000004 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.0484313 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 85 components and 0.0484313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061214Jy  sigma=1.165227
! Fit after  self-cal, rms=0.061210Jy  sigma=1.165042
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061210Jy  sigma=1.165042
! Fit after  self-cal, rms=0.061378Jy  sigma=1.164841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.027 mas, bmaj=12.93 mas, bpa=-6.63 degrees
! Estimated noise=0.394422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000613713 Jy
! Component: 100  -  total flux cleaned = 0.000431212 Jy
! Component: 150  -  total flux cleaned = 0.000327561 Jy
! Component: 200  -  total flux cleaned = 0.000207305 Jy
! Total flux subtracted in 200 components = 0.000207305 Jy
! Clean residual min=-0.001477 max=0.001378 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0486386 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.0486386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061360Jy  sigma=1.164544
! Fit after  self-cal, rms=0.061375Jy  sigma=1.164432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137309 Jy
! Component: 100  -  total flux cleaned = 0.000105019 Jy
! Component: 150  -  total flux cleaned = 7.68741e-05 Jy
! Component: 200  -  total flux cleaned = 2.50288e-05 Jy
! Total flux subtracted in 200 components = 2.50288e-05 Jy
! Clean residual min=-0.001508 max=0.001382 Jy/beam
! Clean residual mean=-0.000004 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0486636 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 109 components and 0.0486636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061366Jy  sigma=1.164292
! Fit after  self-cal, rms=0.061364Jy  sigma=1.164252
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061364Jy  sigma=1.164252
! Fit after  self-cal, rms=0.061444Jy  sigma=1.164191
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.821 mas, bmaj=13.67 mas, bpa=-2.221 degrees
! Estimated noise=0.425537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157117 Jy
! Component: 100  -  total flux cleaned = -0.000156981 Jy
! Component: 150  -  total flux cleaned = -0.000167572 Jy
! Component: 200  -  total flux cleaned = -0.000187412 Jy
! Total flux subtracted in 200 components = -0.000187412 Jy
! Clean residual min=-0.001341 max=0.001584 Jy/beam
! Clean residual mean=-0.000004 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0484762 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 119 components and 0.0484762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061439Jy  sigma=1.164125
! Fit after  self-cal, rms=0.061449Jy  sigma=1.164096
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.06245e-05 Jy
! Component: 100  -  total flux cleaned = -7.06672e-05 Jy
! Component: 150  -  total flux cleaned = -6.12887e-05 Jy
! Component: 200  -  total flux cleaned = -6.98645e-05 Jy
! Total flux subtracted in 200 components = -6.98645e-05 Jy
! Clean residual min=-0.001342 max=0.001573 Jy/beam
! Clean residual mean=-0.000004 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0484063 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.0484063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061446Jy  sigma=1.164059
! Fit after  self-cal, rms=0.061447Jy  sigma=1.164050
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.022 mas, bmaj=12.94 mas, bpa=-6.705 degrees
! Estimated noise=0.394638 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.022 x 12.94 at -6.705 degrees (North through East)
! Clean map  min=-0.0015455  max=0.04743 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.342 mas, bmaj=12.25 mas, bpa=-5.233 degrees
! Estimated noise=0.481138 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0371721 Jy
! Component: 100  -  total flux cleaned = 0.0456299 Jy
! Component: 150  -  total flux cleaned = 0.0489198 Jy
! Component: 200  -  total flux cleaned = 0.0496358 Jy
! Total flux subtracted in 200 components = 0.0496358 Jy
! Clean residual min=-0.001972 max=0.001940 Jy/beam
! Clean residual mean=-0.000003 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.0496358 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0496358 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.022 mas, bmaj=12.94 mas, bpa=-6.705 degrees
! Estimated noise=0.394638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120322 Jy
! Component: 100  -  total flux cleaned = 8.54087e-05 Jy
! Component: 150  -  total flux cleaned = -6.00135e-05 Jy
! Component: 200  -  total flux cleaned = -8.4701e-05 Jy
! Total flux subtracted in 200 components = -8.4701e-05 Jy
! Clean residual min=-0.001532 max=0.001434 Jy/beam
! Clean residual mean=-0.000003 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.0495511 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 44 components and 0.0495511 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.821 mas, bmaj=13.67 mas, bpa=-2.221 degrees
! Estimated noise=0.425537 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000333005 Jy
! Component: 100  -  total flux cleaned = -0.000500589 Jy
! Component: 150  -  total flux cleaned = -0.000579747 Jy
! Component: 200  -  total flux cleaned = -0.000608196 Jy
! Total flux subtracted in 200 components = -0.000608196 Jy
! Clean residual min=-0.001399 max=0.001626 Jy/beam
! Clean residual mean=-0.000003 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0489429 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.18918e-05 Jy
! Component: 100  -  total flux cleaned = -7.57106e-05 Jy
! Component: 150  -  total flux cleaned = -0.000119995 Jy
! Component: 200  -  total flux cleaned = -0.000140566 Jy
! Total flux subtracted in 200 components = -0.000140566 Jy
! Clean residual min=-0.001378 max=0.001608 Jy/beam
! Clean residual mean=-0.000003 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.0488023 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 72 components and 0.0488023 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.022 mas, bmaj=12.94 mas, bpa=-6.705 degrees
! Estimated noise=0.394638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53167e-05 Jy
! Component: 100  -  total flux cleaned = -9.41068e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136876 Jy
! Component: 200  -  total flux cleaned = -0.000176382 Jy
! Total flux subtracted in 200 components = -0.000176382 Jy
! Clean residual min=-0.001559 max=0.001411 Jy/beam
! Clean residual mean=-0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0486259 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 113 components and 0.0486259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061451Jy  sigma=1.164204
! Fit after  self-cal, rms=0.061453Jy  sigma=1.164142
wmodel J2350+0227_S_a_map.mod
! Writing 113 model components to file: J2350+0227_S_a_map.mod
wobs   J2350+0227_S_a_uvs.fits
! Writing UV FITS file: J2350+0227_S_a_uvs.fits
wwins  J2350+0227_S_a_map.win
! wwins: Wrote 2 windows to J2350+0227_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000587784 Jy
! Component: 100  -  total flux cleaned = -0.00103759 Jy
! Component: 150  -  total flux cleaned = -0.00124665 Jy
! Component: 200  -  total flux cleaned = -0.00135444 Jy
! Component: 250  -  total flux cleaned = -0.00143615 Jy
! Component: 300  -  total flux cleaned = -0.00153402 Jy
! Component: 350  -  total flux cleaned = -0.00157124 Jy
! Component: 400  -  total flux cleaned = -0.00164338 Jy
! Component: 450  -  total flux cleaned = -0.00167797 Jy
! Component: 500  -  total flux cleaned = -0.00172857 Jy
! Component: 550  -  total flux cleaned = -0.00179462 Jy
! Component: 600  -  total flux cleaned = -0.00187454 Jy
! Component: 650  -  total flux cleaned = -0.00190543 Jy
! Component: 700  -  total flux cleaned = -0.00193564 Jy
! Component: 750  -  total flux cleaned = -0.00196496 Jy
! Component: 800  -  total flux cleaned = -0.00196461 Jy
! Component: 850  -  total flux cleaned = -0.00197882 Jy
! Component: 900  -  total flux cleaned = -0.00202014 Jy
! Component: 950  -  total flux cleaned = -0.00201986 Jy
! Component: 1000  -  total flux cleaned = -0.00205973 Jy
! Component: 1050  -  total flux cleaned = -0.00207272 Jy
! Component: 1100  -  total flux cleaned = -0.0020727 Jy
! Component: 1150  -  total flux cleaned = -0.00208534 Jy
! Component: 1200  -  total flux cleaned = -0.0021102 Jy
! Component: 1250  -  total flux cleaned = -0.00212223 Jy
! Component: 1300  -  total flux cleaned = -0.00213396 Jy
! Component: 1350  -  total flux cleaned = -0.00211052 Jy
! Component: 1400  -  total flux cleaned = -0.00214518 Jy
! Component: 1450  -  total flux cleaned = -0.00214509 Jy
! Component: 1500  -  total flux cleaned = -0.00215641 Jy
! Component: 1550  -  total flux cleaned = -0.00218916 Jy
! Component: 1600  -  total flux cleaned = -0.00217823 Jy
! Component: 1650  -  total flux cleaned = -0.00216782 Jy
! Component: 1700  -  total flux cleaned = -0.00216786 Jy
! Component: 1750  -  total flux cleaned = -0.00218851 Jy
! Component: 1800  -  total flux cleaned = -0.00217819 Jy
! Component: 1850  -  total flux cleaned = -0.00216796 Jy
! Component: 1900  -  total flux cleaned = -0.00216801 Jy
! Component: 1950  -  total flux cleaned = -0.00215805 Jy
! Component: 2000  -  total flux cleaned = -0.00219717 Jy
! Component: 2050  -  total flux cleaned = -0.00216838 Jy
! Component: 2100  -  total flux cleaned = -0.00218728 Jy
! Component: 2150  -  total flux cleaned = -0.00219686 Jy
! Component: 2200  -  total flux cleaned = -0.00220598 Jy
! Component: 2250  -  total flux cleaned = -0.00215093 Jy
! Component: 2300  -  total flux cleaned = -0.00217818 Jy
! Component: 2350  -  total flux cleaned = -0.0021872 Jy
! Component: 2400  -  total flux cleaned = -0.00216939 Jy
! Component: 2450  -  total flux cleaned = -0.00221325 Jy
! Component: 2500  -  total flux cleaned = -0.00219582 Jy
! Component: 2550  -  total flux cleaned = -0.00219582 Jy
! Component: 2600  -  total flux cleaned = -0.00218741 Jy
! Component: 2650  -  total flux cleaned = -0.00223785 Jy
! Component: 2700  -  total flux cleaned = -0.00222941 Jy
! Component: 2750  -  total flux cleaned = -0.00223776 Jy
! Component: 2800  -  total flux cleaned = -0.00226228 Jy
! Component: 2850  -  total flux cleaned = -0.00227022 Jy
! Component: 2900  -  total flux cleaned = -0.00230221 Jy
! Component: 2950  -  total flux cleaned = -0.00227054 Jy
! Component: 3000  -  total flux cleaned = -0.0022785 Jy
! Component: 3050  -  total flux cleaned = -0.00230972 Jy
! Component: 3100  -  total flux cleaned = -0.00233296 Jy
! Component: 3150  -  total flux cleaned = -0.00236365 Jy
! Component: 3200  -  total flux cleaned = -0.00236366 Jy
! Component: 3250  -  total flux cleaned = -0.00236355 Jy
! Component: 3300  -  total flux cleaned = -0.00240105 Jy
! Component: 3350  -  total flux cleaned = -0.00242343 Jy
! Component: 3400  -  total flux cleaned = -0.00246025 Jy
! Component: 3450  -  total flux cleaned = -0.00247499 Jy
! Component: 3500  -  total flux cleaned = -0.00251858 Jy
! Component: 3550  -  total flux cleaned = -0.00253313 Jy
! Component: 3600  -  total flux cleaned = -0.00257625 Jy
! Component: 3650  -  total flux cleaned = -0.00261196 Jy
! Component: 3700  -  total flux cleaned = -0.00263321 Jy
! Component: 3750  -  total flux cleaned = -0.00266839 Jy
! Component: 3800  -  total flux cleaned = -0.00269635 Jy
! Component: 3850  -  total flux cleaned = -0.0027102 Jy
! Component: 3900  -  total flux cleaned = -0.00275856 Jy
! Component: 3950  -  total flux cleaned = -0.00277231 Jy
! Component: 4000  -  total flux cleaned = -0.00277914 Jy
! Component: 4050  -  total flux cleaned = -0.00279947 Jy
! Total flux subtracted in 4096 components = -0.00283322 Jy
! Clean residual min=-0.000424 max=0.000370 Jy/beam
! Clean residual mean=0.000001 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0457927 Jy
keep
! Adding 361 model components to the UV plane model.
! The established model now contains 474 components and 0.0457927 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2350+0227_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.022 x 12.94 at -6.705 degrees (North through East)
! Clean map  min=-0.0011912  max=0.047206 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2350+0227_S_a_map.fits
wmodel /vlbi/uf001/uva//J2350+0227_S_a_map.mod
! Writing 474 model components to file: /vlbi/uf001/uva//J2350+0227_S_a_map.mod
wobs   /vlbi/uf001/uva//J2350+0227_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2350+0227_S_a_uvs.fits
wwins  /vlbi/uf001/uva//J2350+0227_S_a_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2350+0227_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0472059 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131747 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.837268 0.837268 1.67454 3.34907 6.69815 13.3963 26.7926 53.5852
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  358.308 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2350+0227_S_a_dfm.log closed on Mon Jan 14 06:53:17 2019