! Started logfile: /vlbi/uf001/uva//J2349-0438_X_dfm.log on Mon Jan 14 06:53:04 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2349-0438_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2349-0438_X_uva.fits
! AN table 1: 110 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.986263 visibilities/baseline/integration-bin.
! Found source: J2349-0438
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 58584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2349-0438_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019974Jy  sigma=22.681438
! Fit after  self-cal, rms=0.824623Jy  sigma=18.288876
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6708 mas, bmaj=1.687 mas, bpa=-3.031 degrees
! Estimated noise=0.265045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128597 Jy
! Component: 100  -  total flux cleaned = 0.16149 Jy
! Total flux subtracted in 100 components = 0.16149 Jy
! Clean residual min=-0.005380 max=0.014212 Jy/beam
! Clean residual mean=0.000021 rms=0.001201 Jy/beam
! Combined flux in latest and established models = 0.16149 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.16149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065375Jy  sigma=1.399115
! Fit after  self-cal, rms=0.065356Jy  sigma=1.398647
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157648 Jy
! Component: 100  -  total flux cleaned = 0.0248625 Jy
! Total flux subtracted in 100 components = 0.0248625 Jy
! Clean residual min=-0.004116 max=0.005588 Jy/beam
! Clean residual mean=0.000010 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.186352 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 16 components and 0.186352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059521Jy  sigma=1.262859
! Fit after  self-cal, rms=0.059498Jy  sigma=1.262226
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573802 Jy
! Component: 100  -  total flux cleaned = 0.00929317 Jy
! Total flux subtracted in 100 components = 0.00929317 Jy
! Clean residual min=-0.003913 max=0.005480 Jy/beam
! Clean residual mean=0.000006 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.195646 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.195646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058566Jy  sigma=1.241406
! Fit after  self-cal, rms=0.058563Jy  sigma=1.241255
! Inverting map 
! Added new window around map position (-1.6, -3.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00489942 Jy
! Component: 100  -  total flux cleaned = 0.00670079 Jy
! Total flux subtracted in 100 components = 0.00670079 Jy
! Clean residual min=-0.003664 max=0.005156 Jy/beam
! Clean residual mean=0.000005 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.202346 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 0.202346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058074Jy  sigma=1.229594
! Fit after  self-cal, rms=0.058041Jy  sigma=1.228742
! Inverting map 
! Added new window around map position (1.6, 3.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00376591 Jy
! Component: 100  -  total flux cleaned = 0.00547521 Jy
! Total flux subtracted in 100 components = 0.00547521 Jy
! Clean residual min=-0.003443 max=0.004053 Jy/beam
! Clean residual mean=0.000004 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.207822 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.207822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057700Jy  sigma=1.220034
! Fit after  self-cal, rms=0.057684Jy  sigma=1.219760
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8584 mas, bmaj=2.017 mas, bpa=-2.931 degrees
! Estimated noise=0.13457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00530474 Jy
! Component: 100  -  total flux cleaned = 0.00849142 Jy
! Component: 150  -  total flux cleaned = 0.0109582 Jy
! Component: 200  -  total flux cleaned = 0.012577 Jy
! Total flux subtracted in 200 components = 0.012577 Jy
! Clean residual min=-0.003181 max=0.003572 Jy/beam
! Clean residual mean=0.000000 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.220399 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.220399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057128Jy  sigma=1.205913
! Fit after  self-cal, rms=0.057094Jy  sigma=1.205128
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8584 x 2.017 at -2.931 degrees (North through East)
! Clean map  min=-0.0029339  max=0.17395 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.94     KP        1.05     
!   LA        1.00     MK        0.99     NL        1.08     OV        0.93     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.95     KP        1.04     
!   LA        0.99     MK        0.99     NL        1.06     OV        0.94     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.95     KP        1.06     
!   LA        1.01     MK        1.01     NL        1.06     OV        0.93     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.92     KP        1.06     
!   LA        1.00     MK        1.02     NL        1.07     OV        0.93     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.94     KP        1.07     
!   LA        1.00     MK        0.99     NL        1.10     OV        0.93     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.94     KP        1.05     
!   LA        1.00     MK        1.00     NL        1.08     OV        0.92     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.95     KP        1.05     
!   LA        0.98     MK        0.99     NL        1.09     OV        0.92     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.96     KP        1.04     
!   LA        1.00     MK        1.01     NL        1.10     OV        0.93     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.01     HN        0.97     KP        1.06     
!   LA        1.00     MK        1.00     NL        1.08     OV        0.92     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        0.96     KP        1.06     
!   LA        1.00     MK        1.01     NL        1.08     OV        0.92     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.97     KP        1.06     
!   LA        1.01     MK        1.03     NL        1.09     OV        0.94     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        0.95     KP        1.05     
!   LA        0.98     MK        1.06     NL        1.10     OV        0.93     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.057094Jy  sigma=1.205128
! Fit after  self-cal, rms=0.055860Jy  sigma=1.175861
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8578 mas, bmaj=2.026 mas, bpa=-2.882 degrees
! Estimated noise=0.134433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153452 Jy
! Component: 100  -  total flux cleaned = -0.00131512 Jy
! Component: 150  -  total flux cleaned = -0.00107554 Jy
! Component: 200  -  total flux cleaned = -0.00102481 Jy
! Total flux subtracted in 200 components = -0.00102481 Jy
! Clean residual min=-0.001716 max=0.001797 Jy/beam
! Clean residual mean=-0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.219374 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.219374 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055687Jy  sigma=1.171915
! Fit after  self-cal, rms=0.055704Jy  sigma=1.171714
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055704Jy  sigma=1.171714
! Fit after  self-cal, rms=0.055259Jy  sigma=1.164671
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8566 mas, bmaj=2.028 mas, bpa=-2.784 degrees
! Estimated noise=0.13446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107048 Jy
! Component: 100  -  total flux cleaned = -0.00134127 Jy
! Component: 150  -  total flux cleaned = -0.00141411 Jy
! Component: 200  -  total flux cleaned = -0.0015086 Jy
! Total flux subtracted in 200 components = -0.0015086 Jy
! Clean residual min=-0.000981 max=0.001545 Jy/beam
! Clean residual mean=-0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.217865 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 101 components and 0.217865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055194Jy  sigma=1.163238
! Fit after  self-cal, rms=0.055195Jy  sigma=1.163193
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.8, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101886 Jy
! Component: 100  -  total flux cleaned = 0.00125427 Jy
! Component: 150  -  total flux cleaned = 0.00125583 Jy
! Component: 200  -  total flux cleaned = 0.00125644 Jy
! Total flux subtracted in 200 components = 0.00125644 Jy
! Clean residual min=-0.000888 max=0.001091 Jy/beam
! Clean residual mean=-0.000002 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.219122 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.219122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055153Jy  sigma=1.162273
! Fit after  self-cal, rms=0.055149Jy  sigma=1.162227
! Inverting map 
! Added new window around map position (-0.4, -10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110615 Jy
! Component: 100  -  total flux cleaned = 0.00169116 Jy
! Component: 150  -  total flux cleaned = 0.00178545 Jy
! Component: 200  -  total flux cleaned = 0.00189225 Jy
! Total flux subtracted in 200 components = 0.00189225 Jy
! Clean residual min=-0.000846 max=0.000862 Jy/beam
! Clean residual mean=-0.000002 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.221014 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 137 components and 0.221014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055122Jy  sigma=1.161562
! Fit after  self-cal, rms=0.055120Jy  sigma=1.161539
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055120Jy  sigma=1.161539
! Fit after  self-cal, rms=0.055131Jy  sigma=1.161137
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.856 mas, bmaj=2.029 mas, bpa=-2.753 degrees
! Estimated noise=0.134495 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000753216 Jy
! Component: 100  -  total flux cleaned = -0.000832554 Jy
! Component: 150  -  total flux cleaned = -0.00079051 Jy
! Component: 200  -  total flux cleaned = -0.000733731 Jy
! Total flux subtracted in 200 components = -0.000733731 Jy
! Clean residual min=-0.000764 max=0.000787 Jy/beam
! Clean residual mean=-0.000002 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.22028 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 143 components and 0.22028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055110Jy  sigma=1.160688
! Fit after  self-cal, rms=0.055111Jy  sigma=1.160679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.56807e-05 Jy
! Component: 100  -  total flux cleaned = 7.58357e-05 Jy
! Component: 150  -  total flux cleaned = 6.03503e-05 Jy
! Component: 200  -  total flux cleaned = 3.10188e-05 Jy
! Total flux subtracted in 200 components = 3.10188e-05 Jy
! Clean residual min=-0.000744 max=0.000767 Jy/beam
! Clean residual mean=-0.000002 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.220311 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 152 components and 0.220311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055103Jy  sigma=1.160511
! Fit after  self-cal, rms=0.055102Jy  sigma=1.160505
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055102Jy  sigma=1.160505
! Fit after  self-cal, rms=0.055119Jy  sigma=1.160387
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.106 mas, bmaj=3.505 mas, bpa=-0.6529 degrees
! Estimated noise=0.173222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000730343 Jy
! Component: 100  -  total flux cleaned = -0.000787963 Jy
! Component: 150  -  total flux cleaned = -0.000714058 Jy
! Component: 200  -  total flux cleaned = -0.000682031 Jy
! Total flux subtracted in 200 components = -0.000682031 Jy
! Clean residual min=-0.001080 max=0.000935 Jy/beam
! Clean residual mean=-0.000003 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.219629 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 174 components and 0.219629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055114Jy  sigma=1.160293
! Fit after  self-cal, rms=0.055115Jy  sigma=1.160281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.8151e-05 Jy
! Component: 100  -  total flux cleaned = 6.6093e-05 Jy
! Component: 150  -  total flux cleaned = 8.30745e-05 Jy
! Component: 200  -  total flux cleaned = 0.000107157 Jy
! Total flux subtracted in 200 components = 0.000107157 Jy
! Clean residual min=-0.001058 max=0.000914 Jy/beam
! Clean residual mean=-0.000004 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.219736 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 182 components and 0.219736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055114Jy  sigma=1.160273
! Fit after  self-cal, rms=0.055113Jy  sigma=1.160269
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8558 mas, bmaj=2.03 mas, bpa=-2.734 degrees
! Estimated noise=0.13453 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8558 x 2.03 at -2.734 degrees (North through East)
! Clean map  min=-0.00088857  max=0.17389 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.668 mas, bmaj=1.697 mas, bpa=-2.773 degrees
! Estimated noise=0.265678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12875 Jy
! Component: 100  -  total flux cleaned = 0.162526 Jy
! Component: 150  -  total flux cleaned = 0.179108 Jy
! Component: 200  -  total flux cleaned = 0.188339 Jy
! Total flux subtracted in 200 components = 0.188339 Jy
! Clean residual min=-0.002238 max=0.004577 Jy/beam
! Clean residual mean=0.000009 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.188339 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.188339 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8558 mas, bmaj=2.03 mas, bpa=-2.734 degrees
! Estimated noise=0.13453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00780356 Jy
! Component: 100  -  total flux cleaned = 0.0126962 Jy
! Component: 150  -  total flux cleaned = 0.0161544 Jy
! Component: 200  -  total flux cleaned = 0.0187306 Jy
! Total flux subtracted in 200 components = 0.0187306 Jy
! Clean residual min=-0.001107 max=0.001665 Jy/beam
! Clean residual mean=0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.20707 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 0.20707 Jy
! Inverting map 
! Added new window around map position (0.6, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205483 Jy
! Component: 100  -  total flux cleaned = 0.00369488 Jy
! Component: 150  -  total flux cleaned = 0.00502938 Jy
! Component: 200  -  total flux cleaned = 0.00614777 Jy
! Total flux subtracted in 200 components = 0.00614777 Jy
! Clean residual min=-0.000882 max=0.000966 Jy/beam
! Clean residual mean=0.000000 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.213218 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 57 components and 0.213218 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.106 mas, bmaj=3.505 mas, bpa=-0.6529 degrees
! Estimated noise=0.173222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147154 Jy
! Component: 100  -  total flux cleaned = 0.00256184 Jy
! Component: 150  -  total flux cleaned = 0.00343646 Jy
! Component: 200  -  total flux cleaned = 0.00415923 Jy
! Total flux subtracted in 200 components = 0.00415923 Jy
! Clean residual min=-0.001062 max=0.001128 Jy/beam
! Clean residual mean=-0.000002 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.217377 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000604267 Jy
! Component: 100  -  total flux cleaned = 0.00111246 Jy
! Component: 150  -  total flux cleaned = 0.00142694 Jy
! Component: 200  -  total flux cleaned = 0.001629 Jy
! Total flux subtracted in 200 components = 0.001629 Jy
! Clean residual min=-0.001029 max=0.001023 Jy/beam
! Clean residual mean=-0.000003 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.219006 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 124 components and 0.219006 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8558 mas, bmaj=2.03 mas, bpa=-2.734 degrees
! Estimated noise=0.13453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019437 Jy
! Component: 100  -  total flux cleaned = -0.000144387 Jy
! Component: 150  -  total flux cleaned = -7.551e-05 Jy
! Component: 200  -  total flux cleaned = -9.57031e-05 Jy
! Total flux subtracted in 200 components = -9.57031e-05 Jy
! Clean residual min=-0.000787 max=0.000723 Jy/beam
! Clean residual mean=-0.000001 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.21891 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 143 components and 0.21891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055130Jy  sigma=1.160591
! Fit after  self-cal, rms=0.055122Jy  sigma=1.160512
wmodel J2349-0438_X_map.mod
! Writing 143 model components to file: J2349-0438_X_map.mod
wobs   J2349-0438_X_uvs.fits
! Writing UV FITS file: J2349-0438_X_uvs.fits
wwins  J2349-0438_X_map.win
! wwins: Wrote 7 windows to J2349-0438_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000214459 Jy
! Component: 100  -  total flux cleaned = -0.000227109 Jy
! Component: 150  -  total flux cleaned = -0.000214688 Jy
! Component: 200  -  total flux cleaned = -0.000214813 Jy
! Component: 250  -  total flux cleaned = -0.000191747 Jy
! Component: 300  -  total flux cleaned = -0.000191648 Jy
! Component: 350  -  total flux cleaned = -0.000202443 Jy
! Component: 400  -  total flux cleaned = -0.000180613 Jy
! Component: 450  -  total flux cleaned = -0.00018056 Jy
! Component: 500  -  total flux cleaned = -0.000138772 Jy
! Component: 550  -  total flux cleaned = -9.76758e-05 Jy
! Component: 600  -  total flux cleaned = -8.75173e-05 Jy
! Component: 650  -  total flux cleaned = -9.74084e-05 Jy
! Component: 700  -  total flux cleaned = -3.81652e-05 Jy
! Component: 750  -  total flux cleaned = -5.79068e-05 Jy
! Component: 800  -  total flux cleaned = -3.86211e-05 Jy
! Component: 850  -  total flux cleaned = -1.95129e-05 Jy
! Component: 900  -  total flux cleaned = 8.73936e-06 Jy
! Component: 950  -  total flux cleaned = 2.7267e-05 Jy
! Component: 1000  -  total flux cleaned = 8.98914e-06 Jy
! Component: 1050  -  total flux cleaned = 7.30776e-05 Jy
! Component: 1100  -  total flux cleaned = 7.31169e-05 Jy
! Component: 1150  -  total flux cleaned = 8.20163e-05 Jy
! Component: 1200  -  total flux cleaned = 9.97492e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000134896 Jy
! Component: 1300  -  total flux cleaned = 0.000108755 Jy
! Component: 1350  -  total flux cleaned = 0.00010882 Jy
! Component: 1400  -  total flux cleaned = 8.34165e-05 Jy
! Component: 1450  -  total flux cleaned = 9.18479e-05 Jy
! Component: 1500  -  total flux cleaned = 6.66458e-05 Jy
! Component: 1550  -  total flux cleaned = 0.000116653 Jy
! Component: 1600  -  total flux cleaned = 9.99721e-05 Jy
! Component: 1650  -  total flux cleaned = 9.99256e-05 Jy
! Component: 1700  -  total flux cleaned = 8.36653e-05 Jy
! Component: 1750  -  total flux cleaned = 9.1763e-05 Jy
! Component: 1800  -  total flux cleaned = 6.76974e-05 Jy
! Component: 1850  -  total flux cleaned = 0.000107525 Jy
! Component: 1900  -  total flux cleaned = 0.000115412 Jy
! Component: 1950  -  total flux cleaned = 0.000131086 Jy
! Component: 2000  -  total flux cleaned = 0.000146511 Jy
! Component: 2050  -  total flux cleaned = 0.00013878 Jy
! Component: 2100  -  total flux cleaned = 0.000154097 Jy
! Component: 2150  -  total flux cleaned = 0.000169295 Jy
! Component: 2200  -  total flux cleaned = 0.000139055 Jy
! Component: 2250  -  total flux cleaned = 0.000131541 Jy
! Component: 2300  -  total flux cleaned = 0.000124185 Jy
! Component: 2350  -  total flux cleaned = 0.000139033 Jy
! Component: 2400  -  total flux cleaned = 0.000109646 Jy
! Component: 2450  -  total flux cleaned = 9.50655e-05 Jy
! Component: 2500  -  total flux cleaned = 0.000102268 Jy
! Component: 2550  -  total flux cleaned = 0.000138241 Jy
! Component: 2600  -  total flux cleaned = 0.000109563 Jy
! Component: 2650  -  total flux cleaned = 0.000123824 Jy
! Component: 2700  -  total flux cleaned = 0.000145044 Jy
! Component: 2750  -  total flux cleaned = 0.000123933 Jy
! Component: 2800  -  total flux cleaned = 0.000116975 Jy
! Component: 2850  -  total flux cleaned = 0.000144753 Jy
! Component: 2900  -  total flux cleaned = 0.000137831 Jy
! Component: 2950  -  total flux cleaned = 0.000144699 Jy
! Component: 3000  -  total flux cleaned = 0.000124185 Jy
! Component: 3050  -  total flux cleaned = 0.000103817 Jy
! Component: 3100  -  total flux cleaned = 0.00012406 Jy
! Component: 3150  -  total flux cleaned = 0.000130748 Jy
! Component: 3200  -  total flux cleaned = 0.000117463 Jy
! Component: 3250  -  total flux cleaned = 0.000144031 Jy
! Component: 3300  -  total flux cleaned = 0.00012422 Jy
! Component: 3350  -  total flux cleaned = 0.000117701 Jy
! Component: 3400  -  total flux cleaned = 0.000111161 Jy
! Component: 3450  -  total flux cleaned = 0.000124238 Jy
! Component: 3500  -  total flux cleaned = 0.000124244 Jy
! Component: 3550  -  total flux cleaned = 0.000137144 Jy
! Component: 3600  -  total flux cleaned = 0.000124384 Jy
! Component: 3650  -  total flux cleaned = 0.000137164 Jy
! Component: 3700  -  total flux cleaned = 0.000130862 Jy
! Component: 3750  -  total flux cleaned = 0.000105696 Jy
! Component: 3800  -  total flux cleaned = 0.000111962 Jy
! Component: 3850  -  total flux cleaned = 0.000105792 Jy
! Component: 3900  -  total flux cleaned = 8.71917e-05 Jy
! Component: 3950  -  total flux cleaned = 6.86797e-05 Jy
! Component: 4000  -  total flux cleaned = 0.000111745 Jy
! Component: 4050  -  total flux cleaned = 0.000105582 Jy
! Total flux subtracted in 4096 components = 0.000105547 Jy
! Clean residual min=-0.000405 max=0.000360 Jy/beam
! Clean residual mean=-0.000001 rms=0.000107 Jy/beam
! Combined flux in latest and established models = 0.219016 Jy
keep
! Adding 335 model components to the UV plane model.
! The established model now contains 478 components and 0.219016 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2349-0438_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8558 x 2.03 at -2.734 degrees (North through East)
! Clean map  min=-0.00060844  max=0.17441 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2349-0438_X_map.fits
wmodel /vlbi/uf001/uva//J2349-0438_X_map.mod
! Writing 478 model components to file: /vlbi/uf001/uva//J2349-0438_X_map.mod
wobs   /vlbi/uf001/uva//J2349-0438_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2349-0438_X_uvs.fits
wwins  /vlbi/uf001/uva//J2349-0438_X_map.win
! wwins: Wrote 8 windows to /vlbi/uf001/uva//J2349-0438_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174414 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106798 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.183697 0.183697 0.367394 0.734787 1.46957 2.93915 5.8783 11.7566 23.5132 47.0264 94.0528
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1633.12 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2349-0438_X_dfm.log closed on Mon Jan 14 06:53:12 2019