! Started logfile: /vlbi/uf001/uva//J2348+0624_X_dfm.log on Mon Jan 14 06:52:04 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2348+0624_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2348+0624_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.907407 visibilities/baseline/integration-bin.
! Found source: J2348+0624
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20580 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2348+0624_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 76 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007067Jy  sigma=20.770709
! Fit after  self-cal, rms=0.882458Jy  sigma=18.025103
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6822 mas, bmaj=1.774 mas, bpa=-5.561 degrees
! Estimated noise=0.417781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0941513 Jy
! Component: 100  -  total flux cleaned = 0.115414 Jy
! Total flux subtracted in 100 components = 0.115414 Jy
! Clean residual min=-0.005698 max=0.010705 Jy/beam
! Clean residual mean=-0.000001 rms=0.001323 Jy/beam
! Combined flux in latest and established models = 0.115414 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.115414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074240Jy  sigma=1.423591
! Fit after  self-cal, rms=0.074176Jy  sigma=1.422085
! Inverting map 
! Added new window around map position (1, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102658 Jy
! Component: 100  -  total flux cleaned = 0.0161042 Jy
! Total flux subtracted in 100 components = 0.0161042 Jy
! Clean residual min=-0.005372 max=0.008418 Jy/beam
! Clean residual mean=-0.000000 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 0.131518 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.131518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072788Jy  sigma=1.373682
! Fit after  self-cal, rms=0.072763Jy  sigma=1.371998
! Inverting map 
! Added new window around map position (-1, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00580292 Jy
! Component: 100  -  total flux cleaned = 0.00775673 Jy
! Total flux subtracted in 100 components = 0.00775673 Jy
! Clean residual min=-0.005453 max=0.005409 Jy/beam
! Clean residual mean=0.000000 rms=0.001089 Jy/beam
! Combined flux in latest and established models = 0.139275 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.139275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072249Jy  sigma=1.355099
! Fit after  self-cal, rms=0.072251Jy  sigma=1.354769
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8595 mas, bmaj=2.037 mas, bpa=-4.621 degrees
! Estimated noise=0.266037 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050811 Jy
! Component: 100  -  total flux cleaned = 0.00852556 Jy
! Component: 150  -  total flux cleaned = 0.0110949 Jy
! Component: 200  -  total flux cleaned = 0.012693 Jy
! Total flux subtracted in 200 components = 0.012693 Jy
! Clean residual min=-0.006658 max=0.005385 Jy/beam
! Clean residual mean=-0.000001 rms=0.001308 Jy/beam
! Combined flux in latest and established models = 0.151968 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 33 components and 0.151968 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071981Jy  sigma=1.340325
! Fit after  self-cal, rms=0.071996Jy  sigma=1.340171
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8595 x 2.037 at -4.621 degrees (North through East)
! Clean map  min=-0.0063014  max=0.12017 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.04     HN        1.11     KP        1.08     
!   LA        0.80     MK        1.05     NL        1.04     OV        0.95     
!   PT        1.13     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.08     HN        1.10     KP        1.04     
!   LA        0.78     MK        1.00     NL        1.04     OV        0.96     
!   PT        1.12     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        1.07     HN        1.10     KP        0.97     
!   LA        0.78     MK        1.01     NL        1.06     OV        0.95     
!   PT        1.11     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.04     HN        1.00     KP        1.05     
!   LA        0.79     MK        1.02     NL        1.10     OV        0.94     
!   PT        1.05     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.04     HN        1.10     KP        1.02     
!   LA        0.83     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.10     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.05     HN        1.06     KP        1.02     
!   LA        0.77     MK        1.02     NL        1.10     OV        0.95     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.05     HN        1.07     KP        1.00     
!   LA        0.80     MK        1.01     NL        1.06     OV        0.96     
!   PT        1.09     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.05     HN        1.13     KP        1.02     
!   LA        0.80     MK        0.99     NL        1.07     OV        0.96     
!   PT        1.06     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.04     HN        1.11     KP        1.02     
!   LA        0.77     MK        0.98     NL        1.11     OV        1.00     
!   PT        1.08     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.05     HN        1.07     KP        1.01     
!   LA        0.80     MK        1.02     NL        1.04     OV        0.99     
!   PT        1.11     SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.13     HN        1.00     KP        1.00     
!   LA        0.78     MK        0.95     NL        1.08     OV        0.98     
!   PT        1.07     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.08     HN        1.08     KP        1.01     
!   LA        0.77     MK        1.03     NL        1.09     OV        0.96     
!   PT        1.10     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.071996Jy  sigma=1.340171
! Fit after  self-cal, rms=0.073141Jy  sigma=1.276470
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8599 mas, bmaj=2.059 mas, bpa=-4.181 degrees
! Estimated noise=0.26754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00330691 Jy
! Component: 100  -  total flux cleaned = -0.0048859 Jy
! Component: 150  -  total flux cleaned = -0.00510814 Jy
! Component: 200  -  total flux cleaned = -0.00520312 Jy
! Total flux subtracted in 200 components = -0.00520312 Jy
! Clean residual min=-0.003058 max=0.003060 Jy/beam
! Clean residual mean=0.000003 rms=0.000736 Jy/beam
! Combined flux in latest and established models = 0.146765 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.146765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072944Jy  sigma=1.273284
! Fit after  self-cal, rms=0.073210Jy  sigma=1.272033
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073210Jy  sigma=1.272033
! Fit after  self-cal, rms=0.078818Jy  sigma=1.242347
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8649 mas, bmaj=2.066 mas, bpa=-4.279 degrees
! Estimated noise=0.269438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017506 Jy
! Component: 100  -  total flux cleaned = -0.00204036 Jy
! Component: 150  -  total flux cleaned = -0.00210664 Jy
! Component: 200  -  total flux cleaned = -0.00216659 Jy
! Total flux subtracted in 200 components = -0.00216659 Jy
! Clean residual min=-0.001570 max=0.001984 Jy/beam
! Clean residual mean=-0.000001 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.144598 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.144598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078760Jy  sigma=1.241314
! Fit after  self-cal, rms=0.078878Jy  sigma=1.241006
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181408 Jy
! Component: 100  -  total flux cleaned = 0.00220108 Jy
! Component: 150  -  total flux cleaned = 0.00247568 Jy
! Component: 200  -  total flux cleaned = 0.00268312 Jy
! Total flux subtracted in 200 components = 0.00268312 Jy
! Clean residual min=-0.001537 max=0.001482 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.147281 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.147281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078824Jy  sigma=1.239753
! Fit after  self-cal, rms=0.078817Jy  sigma=1.239671
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078817Jy  sigma=1.239671
! Fit after  self-cal, rms=0.079198Jy  sigma=1.239066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8639 mas, bmaj=2.066 mas, bpa=-4.251 degrees
! Estimated noise=0.268695 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000926042 Jy
! Component: 100  -  total flux cleaned = -0.000988477 Jy
! Component: 150  -  total flux cleaned = -0.00106586 Jy
! Component: 200  -  total flux cleaned = -0.00108951 Jy
! Total flux subtracted in 200 components = -0.00108951 Jy
! Clean residual min=-0.001507 max=0.001411 Jy/beam
! Clean residual mean=-0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.146192 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 78 components and 0.146192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079169Jy  sigma=1.238533
! Fit after  self-cal, rms=0.079177Jy  sigma=1.238518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.95661e-05 Jy
! Component: 100  -  total flux cleaned = 0.0001132 Jy
! Component: 150  -  total flux cleaned = 9.16382e-05 Jy
! Component: 200  -  total flux cleaned = 7.17425e-05 Jy
! Total flux subtracted in 200 components = 7.17425e-05 Jy
! Clean residual min=-0.001493 max=0.001399 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.146263 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 0.146263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079164Jy  sigma=1.238308
! Fit after  self-cal, rms=0.079162Jy  sigma=1.238305
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079162Jy  sigma=1.238305
! Fit after  self-cal, rms=0.079259Jy  sigma=1.238155
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.131 mas, bmaj=3.315 mas, bpa=-1.502 degrees
! Estimated noise=0.326732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000500871 Jy
! Component: 100  -  total flux cleaned = -0.00043258 Jy
! Component: 150  -  total flux cleaned = -0.000370068 Jy
! Component: 200  -  total flux cleaned = -0.000340686 Jy
! Total flux subtracted in 200 components = -0.000340686 Jy
! Clean residual min=-0.001647 max=0.001836 Jy/beam
! Clean residual mean=-0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.145923 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.145923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079251Jy  sigma=1.237966
! Fit after  self-cal, rms=0.079253Jy  sigma=1.237956
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.22189e-05 Jy
! Component: 100  -  total flux cleaned = 0.000110168 Jy
! Component: 150  -  total flux cleaned = 0.000123185 Jy
! Component: 200  -  total flux cleaned = 0.000135308 Jy
! Total flux subtracted in 200 components = 0.000135308 Jy
! Clean residual min=-0.001672 max=0.001820 Jy/beam
! Clean residual mean=-0.000003 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.146058 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 91 components and 0.146058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079252Jy  sigma=1.237944
! Fit after  self-cal, rms=0.079250Jy  sigma=1.237937
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8638 mas, bmaj=2.067 mas, bpa=-4.231 degrees
! Estimated noise=0.268134 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8638 x 2.067 at -4.231 degrees (North through East)
! Clean map  min=-0.0013476  max=0.12141 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6823 mas, bmaj=1.786 mas, bpa=-5.142 degrees
! Estimated noise=0.426319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0959071 Jy
! Component: 100  -  total flux cleaned = 0.117327 Jy
! Component: 150  -  total flux cleaned = 0.125421 Jy
! Component: 200  -  total flux cleaned = 0.130146 Jy
! Total flux subtracted in 200 components = 0.130146 Jy
! Clean residual min=-0.002114 max=0.002861 Jy/beam
! Clean residual mean=0.000000 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.130146 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.130146 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8638 mas, bmaj=2.067 mas, bpa=-4.231 degrees
! Estimated noise=0.268134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00377483 Jy
! Component: 100  -  total flux cleaned = 0.00622321 Jy
! Component: 150  -  total flux cleaned = 0.00802602 Jy
! Component: 200  -  total flux cleaned = 0.00942429 Jy
! Total flux subtracted in 200 components = 0.00942429 Jy
! Clean residual min=-0.001598 max=0.001445 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.139571 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.139571 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.131 mas, bmaj=3.315 mas, bpa=-1.502 degrees
! Estimated noise=0.326732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180707 Jy
! Component: 100  -  total flux cleaned = 0.00305309 Jy
! Component: 150  -  total flux cleaned = 0.0039725 Jy
! Component: 200  -  total flux cleaned = 0.00458646 Jy
! Total flux subtracted in 200 components = 0.00458646 Jy
! Clean residual min=-0.001832 max=0.001815 Jy/beam
! Clean residual mean=-0.000003 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.144157 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336294 Jy
! Component: 100  -  total flux cleaned = 0.000490906 Jy
! Component: 150  -  total flux cleaned = 0.000610254 Jy
! Component: 200  -  total flux cleaned = 0.00070192 Jy
! Total flux subtracted in 200 components = 0.00070192 Jy
! Clean residual min=-0.001771 max=0.001760 Jy/beam
! Clean residual mean=-0.000003 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.144859 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 62 components and 0.144859 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8638 mas, bmaj=2.067 mas, bpa=-4.231 degrees
! Estimated noise=0.268134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336714 Jy
! Component: 100  -  total flux cleaned = -0.000399435 Jy
! Component: 150  -  total flux cleaned = -0.000268386 Jy
! Component: 200  -  total flux cleaned = -0.000267545 Jy
! Total flux subtracted in 200 components = -0.000267545 Jy
! Clean residual min=-0.001429 max=0.001386 Jy/beam
! Clean residual mean=-0.000001 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.144591 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.144592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079261Jy  sigma=1.237842
! Fit after  self-cal, rms=0.079219Jy  sigma=1.237798
wmodel J2348+0624_X_map.mod
! Writing 76 model components to file: J2348+0624_X_map.mod
wobs   J2348+0624_X_uvs.fits
! Writing UV FITS file: J2348+0624_X_uvs.fits
wwins  J2348+0624_X_map.win
! wwins: Wrote 4 windows to J2348+0624_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000293721 Jy
! Component: 100  -  total flux cleaned = -0.000344137 Jy
! Component: 150  -  total flux cleaned = -0.000439937 Jy
! Component: 200  -  total flux cleaned = -0.000509267 Jy
! Component: 250  -  total flux cleaned = -0.000508937 Jy
! Component: 300  -  total flux cleaned = -0.000465447 Jy
! Component: 350  -  total flux cleaned = -0.000487077 Jy
! Component: 400  -  total flux cleaned = -0.000444791 Jy
! Component: 450  -  total flux cleaned = -0.000424355 Jy
! Component: 500  -  total flux cleaned = -0.000444357 Jy
! Component: 550  -  total flux cleaned = -0.000384037 Jy
! Component: 600  -  total flux cleaned = -0.000364684 Jy
! Component: 650  -  total flux cleaned = -0.000364554 Jy
! Component: 700  -  total flux cleaned = -0.000306832 Jy
! Component: 750  -  total flux cleaned = -0.000326346 Jy
! Component: 800  -  total flux cleaned = -0.000251544 Jy
! Component: 850  -  total flux cleaned = -0.000233227 Jy
! Component: 900  -  total flux cleaned = -0.000251507 Jy
! Component: 950  -  total flux cleaned = -0.000142598 Jy
! Component: 1000  -  total flux cleaned = -0.000142545 Jy
! Component: 1050  -  total flux cleaned = -3.62952e-05 Jy
! Component: 1100  -  total flux cleaned = -1.88762e-05 Jy
! Component: 1150  -  total flux cleaned = -1.90066e-05 Jy
! Component: 1200  -  total flux cleaned = 5.02103e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000101184 Jy
! Component: 1300  -  total flux cleaned = 8.42493e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000117526 Jy
! Component: 1400  -  total flux cleaned = 0.000167184 Jy
! Component: 1450  -  total flux cleaned = 0.000150463 Jy
! Component: 1500  -  total flux cleaned = 0.000101673 Jy
! Component: 1550  -  total flux cleaned = 0.000215117 Jy
! Component: 1600  -  total flux cleaned = 0.000263317 Jy
! Component: 1650  -  total flux cleaned = 0.000247208 Jy
! Component: 1700  -  total flux cleaned = 0.000215824 Jy
! Component: 1750  -  total flux cleaned = 0.000247308 Jy
! Component: 1800  -  total flux cleaned = 0.000294028 Jy
! Component: 1850  -  total flux cleaned = 0.000386804 Jy
! Component: 1900  -  total flux cleaned = 0.000325153 Jy
! Component: 1950  -  total flux cleaned = 0.000340399 Jy
! Component: 2000  -  total flux cleaned = 0.000340213 Jy
! Component: 2050  -  total flux cleaned = 0.000355321 Jy
! Component: 2100  -  total flux cleaned = 0.000415046 Jy
! Component: 2150  -  total flux cleaned = 0.00044467 Jy
! Component: 2200  -  total flux cleaned = 0.000429825 Jy
! Component: 2250  -  total flux cleaned = 0.000488526 Jy
! Component: 2300  -  total flux cleaned = 0.000590243 Jy
! Component: 2350  -  total flux cleaned = 0.000474649 Jy
! Component: 2400  -  total flux cleaned = 0.000560906 Jy
! Component: 2450  -  total flux cleaned = 0.000561024 Jy
! Component: 2500  -  total flux cleaned = 0.000589443 Jy
! Component: 2550  -  total flux cleaned = 0.000617649 Jy
! Component: 2600  -  total flux cleaned = 0.0006736 Jy
! Component: 2650  -  total flux cleaned = 0.000715282 Jy
! Component: 2700  -  total flux cleaned = 0.000756679 Jy
! Component: 2750  -  total flux cleaned = 0.000825325 Jy
! Component: 2800  -  total flux cleaned = 0.000839018 Jy
! Component: 2850  -  total flux cleaned = 0.000879864 Jy
! Component: 2900  -  total flux cleaned = 0.000839336 Jy
! Component: 2950  -  total flux cleaned = 0.000933292 Jy
! Component: 3000  -  total flux cleaned = 0.000919968 Jy
! Component: 3050  -  total flux cleaned = 0.00097299 Jy
! Component: 3100  -  total flux cleaned = 0.000973081 Jy
! Component: 3150  -  total flux cleaned = 0.00102557 Jy
! Component: 3200  -  total flux cleaned = 0.00103874 Jy
! Component: 3250  -  total flux cleaned = 0.0010905 Jy
! Component: 3300  -  total flux cleaned = 0.00112925 Jy
! Component: 3350  -  total flux cleaned = 0.00114212 Jy
! Component: 3400  -  total flux cleaned = 0.00116771 Jy
! Component: 3450  -  total flux cleaned = 0.00120576 Jy
! Component: 3500  -  total flux cleaned = 0.00116794 Jy
! Component: 3550  -  total flux cleaned = 0.00119306 Jy
! Component: 3600  -  total flux cleaned = 0.00126796 Jy
! Component: 3650  -  total flux cleaned = 0.00131744 Jy
! Component: 3700  -  total flux cleaned = 0.00128037 Jy
! Component: 3750  -  total flux cleaned = 0.00135396 Jy
! Component: 3800  -  total flux cleaned = 0.001354 Jy
! Component: 3850  -  total flux cleaned = 0.00136604 Jy
! Component: 3900  -  total flux cleaned = 0.00136588 Jy
! Component: 3950  -  total flux cleaned = 0.00135388 Jy
! Component: 4000  -  total flux cleaned = 0.00144952 Jy
! Component: 4050  -  total flux cleaned = 0.00149695 Jy
! Total flux subtracted in 4096 components = 0.00149697 Jy
! Clean residual min=-0.000885 max=0.000627 Jy/beam
! Clean residual mean=-0.000001 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.146088 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 372 components and 0.146088 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2348+0624_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8638 x 2.067 at -4.231 degrees (North through East)
! Clean map  min=-0.001186  max=0.12382 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2348+0624_X_map.fits
wmodel /vlbi/uf001/uva//J2348+0624_X_map.mod
! Writing 372 model components to file: /vlbi/uf001/uva//J2348+0624_X_map.mod
wobs   /vlbi/uf001/uva//J2348+0624_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2348+0624_X_uvs.fits
wwins  /vlbi/uf001/uva//J2348+0624_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2348+0624_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.123817 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000202499 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.490641 0.490641 0.981281 1.96256 3.92512 7.85025 15.7005 31.401 62.802
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.123 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  611.445 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2348+0624_X_dfm.log closed on Mon Jan 14 06:52:09 2019