! Started logfile: /vlbi/uf001/uva//J2348+0624_S_dfm.log on Mon Jan 14 06:51:59 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2348+0624_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2348+0624_S_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.907407 visibilities/baseline/integration-bin. ! Found source: J2348+0624 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5145 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2348+0624_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014732Jy sigma=19.511709 ! Fit after self-cal, rms=0.873460Jy sigma=16.740136 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=6.879 mas, bpa=-4.269 degrees ! Estimated noise=0.710043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100562 Jy ! Component: 100 - total flux cleaned = 0.122545 Jy ! Total flux subtracted in 100 components = 0.122545 Jy ! Clean residual min=-0.006252 max=0.006823 Jy/beam ! Clean residual mean=0.000006 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.122545 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.122545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073367Jy sigma=1.371263 ! Fit after self-cal, rms=0.073356Jy sigma=1.371097 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=7.622 mas, bpa=-3.883 degrees ! Estimated noise=0.564881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861139 Jy ! Component: 100 - total flux cleaned = 0.0133101 Jy ! Component: 150 - total flux cleaned = 0.0162538 Jy ! Component: 200 - total flux cleaned = 0.0182173 Jy ! Total flux subtracted in 200 components = 0.0182173 Jy ! Clean residual min=-0.007384 max=0.007552 Jy/beam ! Clean residual mean=0.000018 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.140762 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.140762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072402Jy sigma=1.349963 ! Fit after self-cal, rms=0.072395Jy sigma=1.349462 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.245 x 7.622 at -3.883 degrees (North through East) ! Clean map min=-0.0072212 max=0.12887 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 0.98 KP 1.08 ! LA 0.86 MK 1.00 NL 1.12 OV 0.99 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 1.04 KP 1.14 ! LA 0.83 MK 1.00 NL 1.08 OV 0.96 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.99 KP 1.02 ! LA 0.87 MK 1.01 NL 1.03 OV 0.98 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.072395Jy sigma=1.349462 ! Fit after self-cal, rms=0.071915Jy sigma=1.326417 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.701 mas, bpa=-3.867 degrees ! Estimated noise=0.564071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926332 Jy ! Component: 100 - total flux cleaned = -0.00104895 Jy ! Component: 150 - total flux cleaned = -0.00115487 Jy ! Component: 200 - total flux cleaned = -0.00120251 Jy ! Total flux subtracted in 200 components = -0.00120251 Jy ! Clean residual min=-0.005685 max=0.007419 Jy/beam ! Clean residual mean=0.000011 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.139559 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.139559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071869Jy sigma=1.325728 ! Fit after self-cal, rms=0.071967Jy sigma=1.325119 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.071967Jy sigma=1.325119 ! Fit after self-cal, rms=0.072755Jy sigma=1.311760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=7.731 mas, bpa=-3.921 degrees ! Estimated noise=0.564916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000737339 Jy ! Component: 100 - total flux cleaned = -0.000866127 Jy ! Component: 150 - total flux cleaned = -0.00090857 Jy ! Component: 200 - total flux cleaned = -0.000966659 Jy ! Total flux subtracted in 200 components = -0.000966659 Jy ! Clean residual min=-0.005713 max=0.006221 Jy/beam ! Clean residual mean=0.000002 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.138593 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.138593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072728Jy sigma=1.311506 ! Fit after self-cal, rms=0.072759Jy sigma=1.311280 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105331 Jy ! Component: 100 - total flux cleaned = -0.000168016 Jy ! Component: 150 - total flux cleaned = -0.000200595 Jy ! Component: 200 - total flux cleaned = -0.000232157 Jy ! Total flux subtracted in 200 components = -0.000232157 Jy ! Clean residual min=-0.005733 max=0.006221 Jy/beam ! Clean residual mean=0.000002 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.138361 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.138361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072746Jy sigma=1.311117 ! Fit after self-cal, rms=0.072744Jy sigma=1.311079 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072744Jy sigma=1.311079 ! Fit after self-cal, rms=0.073003Jy sigma=1.310791 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=7.749 mas, bpa=-3.962 degrees ! Estimated noise=0.565479 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000573913 Jy ! Component: 100 - total flux cleaned = -0.000650273 Jy ! Component: 150 - total flux cleaned = -0.000699756 Jy ! Component: 200 - total flux cleaned = -0.00072924 Jy ! Total flux subtracted in 200 components = -0.00072924 Jy ! Clean residual min=-0.005668 max=0.006220 Jy/beam ! Clean residual mean=0.000001 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.137631 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.137631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072989Jy sigma=1.310685 ! Fit after self-cal, rms=0.072993Jy sigma=1.310654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.12669e-05 Jy ! Component: 100 - total flux cleaned = -9.82254e-05 Jy ! Component: 150 - total flux cleaned = -0.000124213 Jy ! Component: 200 - total flux cleaned = -0.000136656 Jy ! Total flux subtracted in 200 components = -0.000136656 Jy ! Clean residual min=-0.005682 max=0.006246 Jy/beam ! Clean residual mean=0.000001 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.137495 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.137495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072986Jy sigma=1.310565 ! Fit after self-cal, rms=0.072984Jy sigma=1.310548 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072984Jy sigma=1.310548 ! Fit after self-cal, rms=0.073127Jy sigma=1.310513 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.371 mas, bmaj=11.56 mas, bpa=-1.118 degrees ! Estimated noise=0.695743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000933657 Jy ! Component: 100 - total flux cleaned = 0.000797016 Jy ! Component: 150 - total flux cleaned = 0.000693779 Jy ! Component: 200 - total flux cleaned = 0.000641769 Jy ! Total flux subtracted in 200 components = 0.000641769 Jy ! Clean residual min=-0.009713 max=0.010706 Jy/beam ! Clean residual mean=0.000001 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.138136 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.138136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073162Jy sigma=1.310725 ! Fit after self-cal, rms=0.073136Jy sigma=1.310365 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.6273e-06 Jy ! Component: 100 - total flux cleaned = -8.77985e-05 Jy ! Component: 150 - total flux cleaned = -0.000178611 Jy ! Component: 200 - total flux cleaned = -0.000178473 Jy ! Total flux subtracted in 200 components = -0.000178473 Jy ! Clean residual min=-0.009750 max=0.010674 Jy/beam ! Clean residual mean=0.000002 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 0.137958 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.137958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073171Jy sigma=1.310680 ! Fit after self-cal, rms=0.073151Jy sigma=1.310453 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=7.762 mas, bpa=-3.998 degrees ! Estimated noise=0.566016 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.27 x 7.762 at -3.998 degrees (North through East) ! Clean map min=-0.0054939 max=0.12895 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=7 mas, bpa=-4.37 degrees ! Estimated noise=0.715136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101164 Jy ! Component: 100 - total flux cleaned = 0.12324 Jy ! Component: 150 - total flux cleaned = 0.129993 Jy ! Component: 200 - total flux cleaned = 0.132956 Jy ! Total flux subtracted in 200 components = 0.132956 Jy ! Clean residual min=-0.005224 max=0.006024 Jy/beam ! Clean residual mean=-0.000002 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.132956 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.132956 Jy ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=7.762 mas, bpa=-3.998 degrees ! Estimated noise=0.566016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306638 Jy ! Component: 100 - total flux cleaned = 0.00372001 Jy ! Component: 150 - total flux cleaned = 0.00407742 Jy ! Component: 200 - total flux cleaned = 0.0041252 Jy ! Total flux subtracted in 200 components = 0.0041252 Jy ! Clean residual min=-0.005643 max=0.006360 Jy/beam ! Clean residual mean=0.000002 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 0.137082 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.137082 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.371 mas, bmaj=11.56 mas, bpa=-1.118 degrees ! Estimated noise=0.695743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130498 Jy ! Component: 100 - total flux cleaned = 0.00108798 Jy ! Component: 150 - total flux cleaned = 0.000976432 Jy ! Component: 200 - total flux cleaned = 0.000975379 Jy ! Total flux subtracted in 200 components = 0.000975379 Jy ! Clean residual min=-0.009811 max=0.010618 Jy/beam ! Clean residual mean=0.000003 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.138057 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.59267e-05 Jy ! Component: 100 - total flux cleaned = -2.5339e-05 Jy ! Component: 150 - total flux cleaned = -2.5833e-05 Jy ! Component: 200 - total flux cleaned = -3.03064e-06 Jy ! Total flux subtracted in 200 components = -3.03064e-06 Jy ! Clean residual min=-0.009817 max=0.010619 Jy/beam ! Clean residual mean=0.000002 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 0.138054 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.138054 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.27 mas, bmaj=7.762 mas, bpa=-3.998 degrees ! Estimated noise=0.566016 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120573 Jy ! Component: 100 - total flux cleaned = -0.000845879 Jy ! Component: 150 - total flux cleaned = -0.000844352 Jy ! Component: 200 - total flux cleaned = -0.000813755 Jy ! Total flux subtracted in 200 components = -0.000813755 Jy ! Clean residual min=-0.005667 max=0.006392 Jy/beam ! Clean residual mean=0.000002 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.13724 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 50 components and 0.13724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073166Jy sigma=1.310797 ! Fit after self-cal, rms=0.073162Jy sigma=1.310602 wmodel J2348+0624_S_map.mod ! Writing 50 model components to file: J2348+0624_S_map.mod wobs J2348+0624_S_uvs.fits ! Writing UV FITS file: J2348+0624_S_uvs.fits wwins J2348+0624_S_map.win ! wwins: Wrote 1 windows to J2348+0624_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267719 Jy ! Component: 100 - total flux cleaned = 0.00456302 Jy ! Component: 150 - total flux cleaned = 0.0066229 Jy ! Component: 200 - total flux cleaned = 0.00838985 Jy ! Component: 250 - total flux cleaned = 0.00980718 Jy ! Component: 300 - total flux cleaned = 0.0108266 Jy ! Component: 350 - total flux cleaned = 0.0115635 Jy ! Component: 400 - total flux cleaned = 0.0122779 Jy ! Component: 450 - total flux cleaned = 0.0130474 Jy ! Component: 500 - total flux cleaned = 0.0136455 Jy ! Component: 550 - total flux cleaned = 0.0143743 Jy ! Component: 600 - total flux cleaned = 0.014871 Jy ! Component: 650 - total flux cleaned = 0.0152874 Jy ! Component: 700 - total flux cleaned = 0.0156275 Jy ! Component: 750 - total flux cleaned = 0.0160935 Jy ! Component: 800 - total flux cleaned = 0.0163545 Jy ! Component: 850 - total flux cleaned = 0.0169297 Jy ! Component: 900 - total flux cleaned = 0.0169912 Jy ! Component: 950 - total flux cleaned = 0.0172388 Jy ! Component: 1000 - total flux cleaned = 0.0173603 Jy ! Component: 1050 - total flux cleaned = 0.0175412 Jy ! Component: 1100 - total flux cleaned = 0.0178334 Jy ! Component: 1150 - total flux cleaned = 0.0178905 Jy ! Component: 1200 - total flux cleaned = 0.0180606 Jy ! Component: 1250 - total flux cleaned = 0.0182837 Jy ! Component: 1300 - total flux cleaned = 0.018283 Jy ! Component: 1350 - total flux cleaned = 0.018446 Jy ! Component: 1400 - total flux cleaned = 0.0185533 Jy ! Component: 1450 - total flux cleaned = 0.0186596 Jy ! Component: 1500 - total flux cleaned = 0.0186081 Jy ! Component: 1550 - total flux cleaned = 0.0189696 Jy ! Component: 1600 - total flux cleaned = 0.0190203 Jy ! Component: 1650 - total flux cleaned = 0.0191699 Jy ! Component: 1700 - total flux cleaned = 0.0192186 Jy ! Component: 1750 - total flux cleaned = 0.0192675 Jy ! Component: 1800 - total flux cleaned = 0.0193645 Jy ! Component: 1850 - total flux cleaned = 0.0195553 Jy ! Component: 1900 - total flux cleaned = 0.0195087 Jy ! Component: 1950 - total flux cleaned = 0.0197406 Jy ! Component: 2000 - total flux cleaned = 0.0196949 Jy ! Component: 2050 - total flux cleaned = 0.019786 Jy ! Component: 2100 - total flux cleaned = 0.0198311 Jy ! Component: 2150 - total flux cleaned = 0.0199205 Jy ! Component: 2200 - total flux cleaned = 0.0200081 Jy ! Component: 2250 - total flux cleaned = 0.0201383 Jy ! Component: 2300 - total flux cleaned = 0.0200521 Jy ! Component: 2350 - total flux cleaned = 0.0201796 Jy ! Component: 2400 - total flux cleaned = 0.0201799 Jy ! Component: 2450 - total flux cleaned = 0.0203048 Jy ! Component: 2500 - total flux cleaned = 0.0203467 Jy ! Component: 2550 - total flux cleaned = 0.0203869 Jy ! Component: 2600 - total flux cleaned = 0.0204272 Jy ! Component: 2650 - total flux cleaned = 0.0205077 Jy ! Component: 2700 - total flux cleaned = 0.0205471 Jy ! Component: 2750 - total flux cleaned = 0.0205475 Jy ! Component: 2800 - total flux cleaned = 0.0207021 Jy ! Component: 2850 - total flux cleaned = 0.0207025 Jy ! Component: 2900 - total flux cleaned = 0.0207024 Jy ! Component: 2950 - total flux cleaned = 0.0208905 Jy ! Component: 3000 - total flux cleaned = 0.020853 Jy ! Component: 3050 - total flux cleaned = 0.0208531 Jy ! Component: 3100 - total flux cleaned = 0.0210357 Jy ! Component: 3150 - total flux cleaned = 0.0210355 Jy ! Component: 3200 - total flux cleaned = 0.0210355 Jy ! Component: 3250 - total flux cleaned = 0.0210353 Jy ! Component: 3300 - total flux cleaned = 0.0210701 Jy ! Component: 3350 - total flux cleaned = 0.021035 Jy ! Component: 3400 - total flux cleaned = 0.021001 Jy ! Component: 3450 - total flux cleaned = 0.0211377 Jy ! Component: 3500 - total flux cleaned = 0.0211038 Jy ! Component: 3550 - total flux cleaned = 0.0211037 Jy ! Component: 3600 - total flux cleaned = 0.0211699 Jy ! Component: 3650 - total flux cleaned = 0.0209717 Jy ! Component: 3700 - total flux cleaned = 0.021005 Jy ! Component: 3750 - total flux cleaned = 0.0209078 Jy ! Component: 3800 - total flux cleaned = 0.0210361 Jy ! Component: 3850 - total flux cleaned = 0.0209404 Jy ! Component: 3900 - total flux cleaned = 0.0209403 Jy ! Component: 3950 - total flux cleaned = 0.0208463 Jy ! Component: 4000 - total flux cleaned = 0.0208773 Jy ! Component: 4050 - total flux cleaned = 0.0209078 Jy ! Total flux subtracted in 4096 components = 0.0208163 Jy ! Clean residual min=-0.001912 max=0.002036 Jy/beam ! Clean residual mean=-0.000006 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.158056 Jy keep ! Adding 408 model components to the UV plane model. ! The established model now contains 458 components and 0.158056 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2348+0624_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.27 x 7.762 at -3.998 degrees (North through East) ! Clean map min=-0.0032841 max=0.12946 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2348+0624_S_map.fits wmodel /vlbi/uf001/uva//J2348+0624_S_map.mod ! Writing 458 model components to file: /vlbi/uf001/uva//J2348+0624_S_map.mod wobs /vlbi/uf001/uva//J2348+0624_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2348+0624_S_uvs.fits wwins /vlbi/uf001/uva//J2348+0624_S_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2348+0624_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.129462 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000641251 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48596 1.48596 2.97193 5.94385 11.8877 23.7754 47.5508 95.1017 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.129 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 201.889 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2348+0624_S_dfm.log closed on Mon Jan 14 06:52:03 2019