! Started logfile: /vlbi/uf001/uva//J2346+3011_X_dfm.log on Mon Jan 14 06:51:00 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2346+3011_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2346+3011_X_uva.fits ! AN table 1: 113 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.890364 visibilities/baseline/integration-bin. ! Found source: J2346+3011 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 43464 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2346+3011_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005083Jy sigma=18.518519 ! Fit after self-cal, rms=0.942050Jy sigma=17.353734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6637 mas, bmaj=1.291 mas, bpa=-0.5067 degrees ! Estimated noise=0.419192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430957 Jy ! Component: 100 - total flux cleaned = 0.0565657 Jy ! Total flux subtracted in 100 components = 0.0565657 Jy ! Clean residual min=-0.005825 max=0.020505 Jy/beam ! Clean residual mean=0.000009 rms=0.001457 Jy/beam ! Combined flux in latest and established models = 0.0565657 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0565657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077694Jy sigma=1.371280 ! Fit after self-cal, rms=0.076191Jy sigma=1.346584 ! Inverting map ! Added new window around map position (12.6, -13.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177792 Jy ! Component: 100 - total flux cleaned = 0.0262495 Jy ! Total flux subtracted in 100 components = 0.0262495 Jy ! Clean residual min=-0.004226 max=0.007161 Jy/beam ! Clean residual mean=0.000007 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.0828152 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 0.0828152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071426Jy sigma=1.246308 ! Fit after self-cal, rms=0.070021Jy sigma=1.218890 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106426 Jy ! Component: 100 - total flux cleaned = 0.0159642 Jy ! Total flux subtracted in 100 components = 0.0159642 Jy ! Clean residual min=-0.003792 max=0.003931 Jy/beam ! Clean residual mean=0.000005 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0987795 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.0987795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068136Jy sigma=1.176632 ! Fit after self-cal, rms=0.067804Jy sigma=1.170440 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540178 Jy ! Component: 100 - total flux cleaned = 0.00849579 Jy ! Total flux subtracted in 100 components = 0.00849579 Jy ! Clean residual min=-0.003478 max=0.003773 Jy/beam ! Clean residual mean=0.000004 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.107275 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.107275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067289Jy sigma=1.157466 ! Fit after self-cal, rms=0.067230Jy sigma=1.156382 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8186 mas, bmaj=1.603 mas, bpa=-0.07478 degrees ! Estimated noise=0.192597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00417522 Jy ! Component: 100 - total flux cleaned = 0.00675751 Jy ! Component: 150 - total flux cleaned = 0.00857506 Jy ! Component: 200 - total flux cleaned = 0.00987547 Jy ! Total flux subtracted in 200 components = 0.00987547 Jy ! Clean residual min=-0.003766 max=0.005497 Jy/beam ! Clean residual mean=0.000005 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.117151 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 0.117151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067031Jy sigma=1.149036 ! Fit after self-cal, rms=0.067010Jy sigma=1.148608 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8186 x 1.603 at -0.07478 degrees (North through East) ! Clean map min=-0.0035056 max=0.058448 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.90 HN 0.92 KP 0.84 ! LA 0.89 MK 1.10 NL 1.33 OV 0.91 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.95 HN 0.89 KP 0.82 ! LA 0.88 MK 1.15 NL 1.32 OV 0.98 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.92 HN 0.88 KP 0.83 ! LA 0.89 MK 1.03 NL 1.29 OV 0.94 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.92 HN 0.91 KP 0.84 ! LA 0.87 MK 1.06 NL 1.26 OV 0.95 ! SC 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.92 HN 0.94 KP 0.85 ! LA 0.87 MK 1.09 NL 1.32 OV 0.95 ! SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.94 HN 0.94 KP 0.84 ! LA 0.89 MK 1.12 NL 1.25 OV 0.94 ! SC 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.96 HN 0.88 KP 0.85 ! LA 0.89 MK 1.05 NL 1.34 OV 0.92 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.93 HN 0.90 KP 0.86 ! LA 0.91 MK 1.07 NL 1.28 OV 0.96 ! SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.91 HN 0.92 KP 0.87 ! LA 0.89 MK 1.14 NL 1.31 OV 0.95 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.95 HN 0.98 KP 0.86 ! LA 0.90 MK 1.03 NL 1.32 OV 0.91 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.92 HN 0.94 KP 0.84 ! LA 0.90 MK 1.03 NL 1.29 OV 0.94 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.90 HN 0.90 KP 0.83 ! LA 0.93 MK 1.01 NL 1.33 OV 0.92 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.067010Jy sigma=1.148608 ! Fit after self-cal, rms=0.067371Jy sigma=1.122648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8284 mas, bmaj=1.637 mas, bpa=0.3416 degrees ! Estimated noise=0.188421 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320375 Jy ! Component: 100 - total flux cleaned = -0.000397178 Jy ! Component: 150 - total flux cleaned = -0.000370533 Jy ! Component: 200 - total flux cleaned = -0.00031669 Jy ! Total flux subtracted in 200 components = -0.00031669 Jy ! Clean residual min=-0.002411 max=0.002574 Jy/beam ! Clean residual mean=-0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.116834 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.116834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067322Jy sigma=1.121735 ! Fit after self-cal, rms=0.067591Jy sigma=1.120392 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067591Jy sigma=1.120392 ! Fit after self-cal, rms=0.071704Jy sigma=1.109478 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8252 mas, bmaj=1.648 mas, bpa=0.3618 degrees ! Estimated noise=0.186683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000390498 Jy ! Component: 100 - total flux cleaned = 0.000620395 Jy ! Component: 150 - total flux cleaned = 0.000781833 Jy ! Component: 200 - total flux cleaned = 0.000884277 Jy ! Total flux subtracted in 200 components = 0.000884277 Jy ! Clean residual min=-0.001187 max=0.001545 Jy/beam ! Clean residual mean=-0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.117718 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 0.117718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071683Jy sigma=1.108992 ! Fit after self-cal, rms=0.071871Jy sigma=1.108579 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132845 Jy ! Component: 100 - total flux cleaned = 0.00167951 Jy ! Component: 150 - total flux cleaned = 0.00188596 Jy ! Component: 200 - total flux cleaned = 0.00201767 Jy ! Total flux subtracted in 200 components = 0.00201767 Jy ! Clean residual min=-0.001097 max=0.001327 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.119736 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.119736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071835Jy sigma=1.107865 ! Fit after self-cal, rms=0.071834Jy sigma=1.107740 ! Inverting map ! Added new window around map position (0.8, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000954637 Jy ! Component: 100 - total flux cleaned = 0.00114185 Jy ! Component: 150 - total flux cleaned = 0.0011973 Jy ! Component: 200 - total flux cleaned = 0.00119798 Jy ! Total flux subtracted in 200 components = 0.00119798 Jy ! Clean residual min=-0.001020 max=0.001157 Jy/beam ! Clean residual mean=-0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.120934 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.120934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071808Jy sigma=1.107125 ! Fit after self-cal, rms=0.071803Jy sigma=1.107068 ! Inverting map ! Added new window around map position (15.4, 11.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185624 Jy ! Component: 100 - total flux cleaned = 0.000206749 Jy ! Component: 150 - total flux cleaned = 0.000232049 Jy ! Component: 200 - total flux cleaned = 0.000256078 Jy ! Total flux subtracted in 200 components = 0.000256078 Jy ! Clean residual min=-0.000986 max=0.001048 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.12119 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.12119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071776Jy sigma=1.106494 ! Fit after self-cal, rms=0.071771Jy sigma=1.106442 ! Inverting map ! Added new window around map position (4.4, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556616 Jy ! Component: 100 - total flux cleaned = 0.000683749 Jy ! Component: 150 - total flux cleaned = 0.000728741 Jy ! Component: 200 - total flux cleaned = 0.000749776 Jy ! Total flux subtracted in 200 components = 0.000749776 Jy ! Clean residual min=-0.000987 max=0.001001 Jy/beam ! Clean residual mean=0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.12194 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.12194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071753Jy sigma=1.106056 ! Fit after self-cal, rms=0.071752Jy sigma=1.106023 ! Inverting map ! Added new window around map position (-10.4, 26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787208 Jy ! Component: 100 - total flux cleaned = 0.000874199 Jy ! Component: 150 - total flux cleaned = 0.000853845 Jy ! Component: 200 - total flux cleaned = 0.000890655 Jy ! Total flux subtracted in 200 components = 0.000890655 Jy ! Clean residual min=-0.000961 max=0.000963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.12283 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 112 components and 0.12283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071735Jy sigma=1.105695 ! Fit after self-cal, rms=0.071734Jy sigma=1.105668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071734Jy sigma=1.105668 ! Fit after self-cal, rms=0.071649Jy sigma=1.105400 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8193 mas, bmaj=1.638 mas, bpa=0.1353 degrees ! Estimated noise=0.185936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668427 Jy ! Component: 100 - total flux cleaned = 0.00090518 Jy ! Component: 150 - total flux cleaned = 0.000982164 Jy ! Component: 200 - total flux cleaned = 0.00103527 Jy ! Total flux subtracted in 200 components = 0.00103527 Jy ! Clean residual min=-0.000953 max=0.000893 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.123866 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.123866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071636Jy sigma=1.105153 ! Fit after self-cal, rms=0.071637Jy sigma=1.105126 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173128 Jy ! Component: 100 - total flux cleaned = 0.000206645 Jy ! Component: 150 - total flux cleaned = 0.000222273 Jy ! Component: 200 - total flux cleaned = 0.000252707 Jy ! Total flux subtracted in 200 components = 0.000252707 Jy ! Clean residual min=-0.000944 max=0.000876 Jy/beam ! Clean residual mean=-0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.124118 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 131 components and 0.124118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071629Jy sigma=1.104985 ! Fit after self-cal, rms=0.071629Jy sigma=1.104977 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071629Jy sigma=1.104977 ! Fit after self-cal, rms=0.071600Jy sigma=1.104941 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=2.539 mas, bpa=2.658 degrees ! Estimated noise=0.242802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746048 Jy ! Component: 100 - total flux cleaned = 0.00118792 Jy ! Component: 150 - total flux cleaned = 0.00146853 Jy ! Component: 200 - total flux cleaned = 0.0016129 Jy ! Total flux subtracted in 200 components = 0.0016129 Jy ! Clean residual min=-0.000891 max=0.000947 Jy/beam ! Clean residual mean=-0.000000 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.125731 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 142 components and 0.125731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071595Jy sigma=1.104900 ! Fit after self-cal, rms=0.071595Jy sigma=1.104874 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217679 Jy ! Component: 100 - total flux cleaned = 0.000343984 Jy ! Component: 150 - total flux cleaned = 0.00038984 Jy ! Component: 200 - total flux cleaned = 0.000443591 Jy ! Total flux subtracted in 200 components = 0.000443591 Jy ! Clean residual min=-0.000874 max=0.000973 Jy/beam ! Clean residual mean=-0.000000 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.126175 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 150 components and 0.126175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071593Jy sigma=1.104855 ! Fit after self-cal, rms=0.071593Jy sigma=1.104851 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=1.633 mas, bpa=0.009427 degrees ! Estimated noise=0.185789 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8169 x 1.633 at 0.009427 degrees (North through East) ! Clean map min=-0.00084189 max=0.056216 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6603 mas, bmaj=1.321 mas, bpa=-0.4139 degrees ! Estimated noise=0.409083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458331 Jy ! Component: 100 - total flux cleaned = 0.0685502 Jy ! Component: 150 - total flux cleaned = 0.0828345 Jy ! Component: 200 - total flux cleaned = 0.0925309 Jy ! Total flux subtracted in 200 components = 0.0925309 Jy ! Clean residual min=-0.002988 max=0.005336 Jy/beam ! Clean residual mean=0.000003 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.0925308 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0925308 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=1.633 mas, bpa=0.009427 degrees ! Estimated noise=0.185789 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903868 Jy ! Component: 100 - total flux cleaned = 0.0147665 Jy ! Component: 150 - total flux cleaned = 0.0187817 Jy ! Component: 200 - total flux cleaned = 0.0217652 Jy ! Total flux subtracted in 200 components = 0.0217652 Jy ! Clean residual min=-0.001399 max=0.001802 Jy/beam ! Clean residual mean=0.000001 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.114296 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.114296 Jy ! Inverting map ! Added new window around map position (1.8, 37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230387 Jy ! Component: 100 - total flux cleaned = 0.00418486 Jy ! Component: 150 - total flux cleaned = 0.00559909 Jy ! Component: 200 - total flux cleaned = 0.00654823 Jy ! Total flux subtracted in 200 components = 0.00654823 Jy ! Clean residual min=-0.001090 max=0.001301 Jy/beam ! Clean residual mean=0.000000 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.120844 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.120844 Jy ! Inverting map ! Added new window around map position (11.6, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846674 Jy ! Component: 100 - total flux cleaned = 0.00151226 Jy ! Component: 150 - total flux cleaned = 0.00215552 Jy ! Component: 200 - total flux cleaned = 0.00270649 Jy ! Total flux subtracted in 200 components = 0.00270649 Jy ! Clean residual min=-0.000976 max=0.001005 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.123551 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 78 components and 0.123551 Jy ! Inverting map ! Added new window around map position (31.2, 45.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600996 Jy ! Component: 100 - total flux cleaned = 0.000986274 Jy ! Component: 150 - total flux cleaned = 0.00125509 Jy ! Component: 200 - total flux cleaned = 0.00147985 Jy ! Total flux subtracted in 200 components = 0.00147985 Jy ! Clean residual min=-0.000902 max=0.000946 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.125031 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 95 components and 0.125031 Jy ! Inverting map ! Added new window around map position (30, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597628 Jy ! Component: 100 - total flux cleaned = 0.000886249 Jy ! Component: 150 - total flux cleaned = 0.00108495 Jy ! Component: 200 - total flux cleaned = 0.00127462 Jy ! Total flux subtracted in 200 components = 0.00127462 Jy ! Clean residual min=-0.000872 max=0.000919 Jy/beam ! Clean residual mean=-0.000000 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.126305 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 108 components and 0.126305 Jy ! Inverting map ! Added new window around map position (5.6, 21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049634 Jy ! Component: 100 - total flux cleaned = 0.000611917 Jy ! Component: 150 - total flux cleaned = 0.000699862 Jy ! Component: 200 - total flux cleaned = 0.00084612 Jy ! Total flux subtracted in 200 components = 0.00084612 Jy ! Clean residual min=-0.000819 max=0.000833 Jy/beam ! Clean residual mean=-0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.127151 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.127151 Jy ! Inverting map ! Added new window around map position (-42.4, -42.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499879 Jy ! Component: 100 - total flux cleaned = 0.000660941 Jy ! Component: 150 - total flux cleaned = 0.000774988 Jy ! Component: 200 - total flux cleaned = 0.000848474 Jy ! Total flux subtracted in 200 components = 0.000848474 Jy ! Clean residual min=-0.000816 max=0.000769 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.128 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 130 components and 0.128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=2.539 mas, bpa=2.658 degrees ! Estimated noise=0.242802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428686 Jy ! Component: 100 - total flux cleaned = 0.000591192 Jy ! Component: 150 - total flux cleaned = 0.000662255 Jy ! Component: 200 - total flux cleaned = 0.000726345 Jy ! Total flux subtracted in 200 components = 0.000726345 Jy ! Clean residual min=-0.000937 max=0.000912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.128726 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.89174e-05 Jy ! Component: 100 - total flux cleaned = 9.60152e-05 Jy ! Component: 150 - total flux cleaned = 0.000172154 Jy ! Component: 200 - total flux cleaned = 0.000257963 Jy ! Total flux subtracted in 200 components = 0.000257963 Jy ! Clean residual min=-0.000904 max=0.000928 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.128984 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 172 components and 0.128984 Jy ! Inverting map ! Added new window around map position (44, -33.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000318599 Jy ! Component: 100 - total flux cleaned = 0.000180337 Jy ! Component: 150 - total flux cleaned = 0.000161639 Jy ! Component: 200 - total flux cleaned = 0.00020578 Jy ! Total flux subtracted in 200 components = 0.00020578 Jy ! Clean residual min=-0.000737 max=0.000791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.12919 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 190 components and 0.12919 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8169 mas, bmaj=1.633 mas, bpa=0.009427 degrees ! Estimated noise=0.185789 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275156 Jy ! Component: 100 - total flux cleaned = 0.000312592 Jy ! Component: 150 - total flux cleaned = 0.000348397 Jy ! Component: 200 - total flux cleaned = 0.000398887 Jy ! Total flux subtracted in 200 components = 0.000398887 Jy ! Clean residual min=-0.000713 max=0.000732 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.129589 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 214 components and 0.129589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071542Jy sigma=1.104006 ! Fit after self-cal, rms=0.071541Jy sigma=1.103808 wmodel J2346+3011_X_map.mod ! Writing 214 model components to file: J2346+3011_X_map.mod wobs J2346+3011_X_uvs.fits ! Writing UV FITS file: J2346+3011_X_uvs.fits wwins J2346+3011_X_map.win ! wwins: Wrote 14 windows to J2346+3011_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000116709 Jy ! Component: 100 - total flux cleaned = -0.000155289 Jy ! Component: 150 - total flux cleaned = -0.000179317 Jy ! Component: 200 - total flux cleaned = -0.0001913 Jy ! Component: 250 - total flux cleaned = -0.00023602 Jy ! Component: 300 - total flux cleaned = -0.000257999 Jy ! Component: 350 - total flux cleaned = -0.000290107 Jy ! Component: 400 - total flux cleaned = -0.000342388 Jy ! Component: 450 - total flux cleaned = -0.000331939 Jy ! Component: 500 - total flux cleaned = -0.000321945 Jy ! Component: 550 - total flux cleaned = -0.000342153 Jy ! Component: 600 - total flux cleaned = -0.000352177 Jy ! Component: 650 - total flux cleaned = -0.000342541 Jy ! Component: 700 - total flux cleaned = -0.000352286 Jy ! Component: 750 - total flux cleaned = -0.000333185 Jy ! Component: 800 - total flux cleaned = -0.000323779 Jy ! Component: 850 - total flux cleaned = -0.000305024 Jy ! Component: 900 - total flux cleaned = -0.000286525 Jy ! Component: 950 - total flux cleaned = -0.00029568 Jy ! Component: 1000 - total flux cleaned = -0.000268333 Jy ! Component: 1050 - total flux cleaned = -0.000250268 Jy ! Component: 1100 - total flux cleaned = -0.00025912 Jy ! Component: 1150 - total flux cleaned = -0.000223686 Jy ! Component: 1200 - total flux cleaned = -0.000241113 Jy ! Component: 1250 - total flux cleaned = -0.000180218 Jy ! Component: 1300 - total flux cleaned = -0.000188756 Jy ! Component: 1350 - total flux cleaned = -0.000163077 Jy ! Component: 1400 - total flux cleaned = -0.000137633 Jy ! Component: 1450 - total flux cleaned = -0.000137693 Jy ! Component: 1500 - total flux cleaned = -0.000120857 Jy ! Component: 1550 - total flux cleaned = -0.000112499 Jy ! Component: 1600 - total flux cleaned = -0.000120694 Jy ! Component: 1650 - total flux cleaned = -9.615e-05 Jy ! Component: 1700 - total flux cleaned = -6.37079e-05 Jy ! Component: 1750 - total flux cleaned = -9.59437e-05 Jy ! Component: 1800 - total flux cleaned = -3.99153e-05 Jy ! Component: 1850 - total flux cleaned = -4.77921e-05 Jy ! Component: 1900 - total flux cleaned = -2.40956e-05 Jy ! Component: 1950 - total flux cleaned = -3.98453e-05 Jy ! Component: 2000 - total flux cleaned = -1.63382e-05 Jy ! Component: 2050 - total flux cleaned = 6.89273e-06 Jy ! Component: 2100 - total flux cleaned = 2.22254e-05 Jy ! Component: 2150 - total flux cleaned = 6.04734e-05 Jy ! Component: 2200 - total flux cleaned = 6.80554e-05 Jy ! Component: 2250 - total flux cleaned = 9.07215e-05 Jy ! Component: 2300 - total flux cleaned = 9.82327e-05 Jy ! Component: 2350 - total flux cleaned = 0.000120564 Jy ! Component: 2400 - total flux cleaned = 0.000135374 Jy ! Component: 2450 - total flux cleaned = 0.000164881 Jy ! Component: 2500 - total flux cleaned = 0.000201567 Jy ! Component: 2550 - total flux cleaned = 0.000194262 Jy ! Component: 2600 - total flux cleaned = 0.000201505 Jy ! Component: 2650 - total flux cleaned = 0.00022325 Jy ! Component: 2700 - total flux cleaned = 0.000273531 Jy ! Component: 2750 - total flux cleaned = 0.00029489 Jy ! Component: 2800 - total flux cleaned = 0.000280718 Jy ! Component: 2850 - total flux cleaned = 0.000287894 Jy ! Component: 2900 - total flux cleaned = 0.000344156 Jy ! Component: 2950 - total flux cleaned = 0.000330134 Jy ! Component: 3000 - total flux cleaned = 0.000357964 Jy ! Component: 3050 - total flux cleaned = 0.000371828 Jy ! Component: 3100 - total flux cleaned = 0.000406407 Jy ! Component: 3150 - total flux cleaned = 0.000413322 Jy ! Component: 3200 - total flux cleaned = 0.000454272 Jy ! Component: 3250 - total flux cleaned = 0.000420239 Jy ! Component: 3300 - total flux cleaned = 0.000467695 Jy ! Component: 3350 - total flux cleaned = 0.000487868 Jy ! Component: 3400 - total flux cleaned = 0.000481184 Jy ! Component: 3450 - total flux cleaned = 0.000481193 Jy ! Component: 3500 - total flux cleaned = 0.000501159 Jy ! Component: 3550 - total flux cleaned = 0.000514399 Jy ! Component: 3600 - total flux cleaned = 0.000540698 Jy ! Component: 3650 - total flux cleaned = 0.000540709 Jy ! Component: 3700 - total flux cleaned = 0.000553751 Jy ! Component: 3750 - total flux cleaned = 0.000547231 Jy ! Component: 3800 - total flux cleaned = 0.000573124 Jy ! Component: 3850 - total flux cleaned = 0.000586032 Jy ! Component: 3900 - total flux cleaned = 0.000598874 Jy ! Component: 3950 - total flux cleaned = 0.00062438 Jy ! Component: 4000 - total flux cleaned = 0.000624396 Jy ! Component: 4050 - total flux cleaned = 0.000649763 Jy ! Total flux subtracted in 4096 components = 0.000662379 Jy ! Clean residual min=-0.000364 max=0.000452 Jy/beam ! Clean residual mean=-0.000000 rms=0.000105 Jy/beam ! Combined flux in latest and established models = 0.130251 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 503 components and 0.130251 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2346+3011_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8169 x 1.633 at 0.009427 degrees (North through East) ! Clean map min=-0.00071006 max=0.056221 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2346+3011_X_map.fits wmodel /vlbi/uf001/uva//J2346+3011_X_map.mod ! Writing 503 model components to file: /vlbi/uf001/uva//J2346+3011_X_map.mod wobs /vlbi/uf001/uva//J2346+3011_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2346+3011_X_uvs.fits wwins /vlbi/uf001/uva//J2346+3011_X_map.win ! wwins: Wrote 15 windows to /vlbi/uf001/uva//J2346+3011_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0562205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000104772 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.559076 0.559076 1.11815 2.2363 4.47261 8.94521 17.8904 35.7808 71.5617 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.056 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 536.6 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2346+3011_X_dfm.log closed on Mon Jan 14 06:51:08 2019