! Started logfile: /vlbi/uf001/uva//J2344+8226_S_dfm.log on Mon Jan 14 06:50:06 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2344+8226_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2344+8226_S_uva.fits
! AN table 1: 145 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.810099 visibilities/baseline/integration-bin.
! Found source: J2344+8226
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 9867 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2344+8226_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 152 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.709426Jy  sigma=20.777517
! Fit after  self-cal, rms=0.793523Jy  sigma=11.258718
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.751 mas, bmaj=6.049 mas, bpa=-85.06 degrees
! Estimated noise=0.706694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.51416 Jy
! Component: 100  -  total flux cleaned = 0.819702 Jy
! Total flux subtracted in 100 components = 0.819702 Jy
! Clean residual min=-0.083559 max=0.167879 Jy/beam
! Clean residual mean=-0.000083 rms=0.025176 Jy/beam
! Combined flux in latest and established models = 0.819703 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.819703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.772156Jy  sigma=7.056094
! Fit after  self-cal, rms=0.769834Jy  sigma=7.009279
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.21634 Jy
! Component: 100  -  total flux cleaned = 0.377681 Jy
! Total flux subtracted in 100 components = 0.377681 Jy
! Clean residual min=-0.061659 max=0.125711 Jy/beam
! Clean residual mean=-0.000129 rms=0.018217 Jy/beam
! Combined flux in latest and established models = 1.19738 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 81 components and 1.19738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.561422Jy  sigma=5.061374
! Fit after  self-cal, rms=0.560692Jy  sigma=5.046228
! Inverting map 
! Added new window around map position (10, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136785 Jy
! Component: 100  -  total flux cleaned = 0.242991 Jy
! Total flux subtracted in 100 components = 0.242991 Jy
! Clean residual min=-0.046152 max=0.079803 Jy/beam
! Clean residual mean=-0.000127 rms=0.014046 Jy/beam
! Combined flux in latest and established models = 1.44037 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 106 components and 1.44037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.442715Jy  sigma=4.046064
! Fit after  self-cal, rms=0.441665Jy  sigma=4.022738
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.468 mas, bmaj=7.092 mas, bpa=-83.6 degrees
! Estimated noise=0.516552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.150008 Jy
! Component: 100  -  total flux cleaned = 0.262532 Jy
! Component: 150  -  total flux cleaned = 0.349989 Jy
! Component: 200  -  total flux cleaned = 0.418756 Jy
! Total flux subtracted in 200 components = 0.418756 Jy
! Clean residual min=-0.041894 max=0.076181 Jy/beam
! Clean residual mean=-0.000318 rms=0.013842 Jy/beam
! Combined flux in latest and established models = 1.85913 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 163 components and 1.85913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.276850Jy  sigma=2.929807
! Fit after  self-cal, rms=0.275221Jy  sigma=2.894330
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.468 x 7.092 at -83.6 degrees (North through East)
! Clean map  min=-0.043737  max=0.6866 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.04     KP        0.94     
!   LA        0.86     NL        1.15     OV        1.07     PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     HN        1.02     KP        0.98     
!   LA        0.85     NL        1.13     OV        1.21     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.96     HN        1.02     KP        0.94     
!   LA        0.87     NL        1.12     OV        1.10     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.275221Jy  sigma=2.894330
! Fit after  self-cal, rms=0.188315Jy  sigma=2.371716
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.528 mas, bmaj=7.179 mas, bpa=-84.21 degrees
! Estimated noise=0.518962 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (96.5, -30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0583723 Jy
! Component: 100  -  total flux cleaned = 0.0896201 Jy
! Component: 150  -  total flux cleaned = 0.11255 Jy
! Component: 200  -  total flux cleaned = 0.131129 Jy
! Total flux subtracted in 200 components = 0.131129 Jy
! Clean residual min=-0.030118 max=0.031877 Jy/beam
! Clean residual mean=-0.000077 rms=0.008018 Jy/beam
! Combined flux in latest and established models = 1.99026 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 198 components and 1.99026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.161797Jy  sigma=2.063423
! Fit after  self-cal, rms=0.159996Jy  sigma=2.045791
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.159996Jy  sigma=2.045791
! Fit after  self-cal, rms=0.116148Jy  sigma=1.477327
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.467 mas, bmaj=7.144 mas, bpa=-81.68 degrees
! Estimated noise=0.50854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164173 Jy
! Component: 100  -  total flux cleaned = 0.0230368 Jy
! Component: 150  -  total flux cleaned = 0.026917 Jy
! Component: 200  -  total flux cleaned = 0.028867 Jy
! Total flux subtracted in 200 components = 0.028867 Jy
! Clean residual min=-0.018251 max=0.020583 Jy/beam
! Clean residual mean=-0.000081 rms=0.004719 Jy/beam
! Combined flux in latest and established models = 2.01913 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 229 components and 2.01913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111680Jy  sigma=1.407696
! Fit after  self-cal, rms=0.111612Jy  sigma=1.405210
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (77, 16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135856 Jy
! Component: 100  -  total flux cleaned = 0.0178372 Jy
! Component: 150  -  total flux cleaned = 0.0184975 Jy
! Component: 200  -  total flux cleaned = 0.0188019 Jy
! Total flux subtracted in 200 components = 0.0188019 Jy
! Clean residual min=-0.016846 max=0.017002 Jy/beam
! Clean residual mean=-0.000055 rms=0.004280 Jy/beam
! Combined flux in latest and established models = 2.03793 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 248 components and 2.03793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108485Jy  sigma=1.338487
! Fit after  self-cal, rms=0.108405Jy  sigma=1.336267
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108405Jy  sigma=1.336267
! Fit after  self-cal, rms=0.106956Jy  sigma=1.328918
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.457 mas, bmaj=7.122 mas, bpa=-82.53 degrees
! Estimated noise=0.506219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00868826 Jy
! Component: 100  -  total flux cleaned = 0.0119742 Jy
! Component: 150  -  total flux cleaned = 0.0136146 Jy
! Component: 200  -  total flux cleaned = 0.0151569 Jy
! Total flux subtracted in 200 components = 0.0151569 Jy
! Clean residual min=-0.016549 max=0.015418 Jy/beam
! Clean residual mean=-0.000071 rms=0.004017 Jy/beam
! Combined flux in latest and established models = 2.05309 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 262 components and 2.05309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105418Jy  sigma=1.302178
! Fit after  self-cal, rms=0.105423Jy  sigma=1.301683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257997 Jy
! Component: 100  -  total flux cleaned = 0.00424276 Jy
! Component: 150  -  total flux cleaned = 0.00513714 Jy
! Component: 200  -  total flux cleaned = 0.00556999 Jy
! Total flux subtracted in 200 components = 0.00556999 Jy
! Clean residual min=-0.015788 max=0.014689 Jy/beam
! Clean residual mean=-0.000065 rms=0.003898 Jy/beam
! Combined flux in latest and established models = 2.05866 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 275 components and 2.05866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104519Jy  sigma=1.284526
! Fit after  self-cal, rms=0.104538Jy  sigma=1.284376
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104538Jy  sigma=1.284376
! Fit after  self-cal, rms=0.104312Jy  sigma=1.282679
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.052 mas, bmaj=9.953 mas, bpa=-81.51 degrees
! Estimated noise=0.657297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00586467 Jy
! Component: 100  -  total flux cleaned = 0.00998472 Jy
! Component: 150  -  total flux cleaned = 0.0123554 Jy
! Component: 200  -  total flux cleaned = 0.0142642 Jy
! Total flux subtracted in 200 components = 0.0142642 Jy
! Clean residual min=-0.017859 max=0.017436 Jy/beam
! Clean residual mean=-0.000127 rms=0.005174 Jy/beam
! Combined flux in latest and established models = 2.07292 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 298 components and 2.07292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103062Jy  sigma=1.279239
! Fit after  self-cal, rms=0.103113Jy  sigma=1.278565
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019774 Jy
! Component: 100  -  total flux cleaned = 0.0029219 Jy
! Component: 150  -  total flux cleaned = 0.00361584 Jy
! Component: 200  -  total flux cleaned = 0.00426767 Jy
! Total flux subtracted in 200 components = 0.00426767 Jy
! Clean residual min=-0.017647 max=0.017131 Jy/beam
! Clean residual mean=-0.000123 rms=0.005089 Jy/beam
! Combined flux in latest and established models = 2.07719 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 306 components and 2.07719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102572Jy  sigma=1.274724
! Fit after  self-cal, rms=0.102626Jy  sigma=1.274493
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.452 mas, bmaj=7.104 mas, bpa=-82.89 degrees
! Estimated noise=0.505519 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.452 x 7.104 at -82.89 degrees (North through East)
! Clean map  min=-0.015039  max=0.66376 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.102626Jy  sigma=1.274493
! Fit after  self-cal, rms=0.095294Jy  sigma=1.171711
! Inverting map and beam 
! Estimated beam: bmin=5.448 mas, bmaj=7.106 mas, bpa=-82.76 degrees
! Estimated noise=0.506786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387413 Jy
! Component: 100  -  total flux cleaned = 0.00527572 Jy
! Component: 150  -  total flux cleaned = 0.00638793 Jy
! Component: 200  -  total flux cleaned = 0.00691016 Jy
! Total flux subtracted in 200 components = 0.00691016 Jy
! Clean residual min=-0.014958 max=0.014103 Jy/beam
! Clean residual mean=-0.000074 rms=0.003685 Jy/beam
! Combined flux in latest and established models = 2.0841 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 328 components and 2.0841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094631Jy  sigma=1.155430
! Fit after  self-cal, rms=0.094597Jy  sigma=1.155282
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115224 Jy
! Component: 100  -  total flux cleaned = 0.00147116 Jy
! Component: 150  -  total flux cleaned = 0.00177539 Jy
! Component: 200  -  total flux cleaned = 0.00221057 Jy
! Total flux subtracted in 200 components = 0.00221057 Jy
! Clean residual min=-0.014603 max=0.013962 Jy/beam
! Clean residual mean=-0.000071 rms=0.003623 Jy/beam
! Combined flux in latest and established models = 2.08631 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 337 components and 2.08631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094229Jy  sigma=1.145142
! Fit after  self-cal, rms=0.094215Jy  sigma=1.145044
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094215Jy  sigma=1.145044
! Fit after  self-cal, rms=0.094402Jy  sigma=1.143977
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.701 mas, bmaj=6.016 mas, bpa=-84.43 degrees
! Estimated noise=0.697893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.51114 Jy
! Component: 100  -  total flux cleaned = 0.821273 Jy
! Component: 150  -  total flux cleaned = 1.03035 Jy
! Component: 200  -  total flux cleaned = 1.18565 Jy
! Total flux subtracted in 200 components = 1.18565 Jy
! Clean residual min=-0.051455 max=0.092795 Jy/beam
! Clean residual mean=-0.000109 rms=0.015450 Jy/beam
! Combined flux in latest and established models = 1.18565 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 73 model components to the UV plane model.
! The established model now contains 73 components and 1.18565 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.44 mas, bmaj=7.091 mas, bpa=-82.76 degrees
! Estimated noise=0.506668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.187766 Jy
! Component: 100  -  total flux cleaned = 0.317163 Jy
! Component: 150  -  total flux cleaned = 0.4103 Jy
! Component: 200  -  total flux cleaned = 0.482396 Jy
! Total flux subtracted in 200 components = 0.482396 Jy
! Clean residual min=-0.034083 max=0.050140 Jy/beam
! Clean residual mean=-0.000250 rms=0.010495 Jy/beam
! Combined flux in latest and established models = 1.66805 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 137 components and 1.66805 Jy
! Inverting map 
! Added new window around map position (-8.5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0620917 Jy
! Component: 100  -  total flux cleaned = 0.112769 Jy
! Component: 150  -  total flux cleaned = 0.156026 Jy
! Component: 200  -  total flux cleaned = 0.193163 Jy
! Total flux subtracted in 200 components = 0.193163 Jy
! Clean residual min=-0.023292 max=0.027878 Jy/beam
! Clean residual mean=-0.000191 rms=0.006666 Jy/beam
! Combined flux in latest and established models = 1.86121 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 173 components and 1.86121 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.039 mas, bmaj=9.933 mas, bpa=-81.51 degrees
! Estimated noise=0.660373 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0482025 Jy
! Component: 100  -  total flux cleaned = 0.0855471 Jy
! Component: 150  -  total flux cleaned = 0.11592 Jy
! Component: 200  -  total flux cleaned = 0.141189 Jy
! Total flux subtracted in 200 components = 0.141189 Jy
! Clean residual min=-0.022743 max=0.023272 Jy/beam
! Clean residual mean=-0.000247 rms=0.006592 Jy/beam
! Combined flux in latest and established models = 2.0024 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211494 Jy
! Component: 100  -  total flux cleaned = 0.0355114 Jy
! Component: 150  -  total flux cleaned = 0.0460716 Jy
! Component: 200  -  total flux cleaned = 0.0547345 Jy
! Total flux subtracted in 200 components = 0.0547345 Jy
! Clean residual min=-0.019940 max=0.019480 Jy/beam
! Clean residual mean=-0.000203 rms=0.005646 Jy/beam
! Combined flux in latest and established models = 2.05713 Jy
! Adding 121 model components to the UV plane model.
! The established model now contains 281 components and 2.05713 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.44 mas, bmaj=7.091 mas, bpa=-82.76 degrees
! Estimated noise=0.506668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113833 Jy
! Component: 100  -  total flux cleaned = 0.0194376 Jy
! Component: 150  -  total flux cleaned = 0.0231287 Jy
! Component: 200  -  total flux cleaned = 0.0250924 Jy
! Total flux subtracted in 200 components = 0.0250924 Jy
! Clean residual min=-0.015762 max=0.016666 Jy/beam
! Clean residual mean=-0.000099 rms=0.003806 Jy/beam
! Combined flux in latest and established models = 2.08222 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 309 components and 2.08222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.095556Jy  sigma=1.155974
! Fit after  self-cal, rms=0.095045Jy  sigma=1.152013
wmodel J2344+8226_S_map.mod
! Writing 309 model components to file: J2344+8226_S_map.mod
wobs   J2344+8226_S_uvs.fits
! Writing UV FITS file: J2344+8226_S_uvs.fits
wwins  J2344+8226_S_map.win
! wwins: Wrote 5 windows to J2344+8226_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000331853 Jy
! Component: 100  -  total flux cleaned = 0.00181256 Jy
! Component: 150  -  total flux cleaned = 0.00318873 Jy
! Component: 200  -  total flux cleaned = 0.00404863 Jy
! Component: 250  -  total flux cleaned = 0.00444382 Jy
! Component: 300  -  total flux cleaned = 0.0048291 Jy
! Component: 350  -  total flux cleaned = 0.00520099 Jy
! Component: 400  -  total flux cleaned = 0.00609058 Jy
! Component: 450  -  total flux cleaned = 0.0060879 Jy
! Component: 500  -  total flux cleaned = 0.00658623 Jy
! Component: 550  -  total flux cleaned = 0.00658344 Jy
! Component: 600  -  total flux cleaned = 0.00642673 Jy
! Component: 650  -  total flux cleaned = 0.00627313 Jy
! Component: 700  -  total flux cleaned = 0.0059767 Jy
! Component: 750  -  total flux cleaned = 0.00612315 Jy
! Component: 800  -  total flux cleaned = 0.00598085 Jy
! Component: 850  -  total flux cleaned = 0.00612139 Jy
! Component: 900  -  total flux cleaned = 0.00625579 Jy
! Component: 950  -  total flux cleaned = 0.00652171 Jy
! Component: 1000  -  total flux cleaned = 0.006523 Jy
! Component: 1050  -  total flux cleaned = 0.00703834 Jy
! Component: 1100  -  total flux cleaned = 0.00728929 Jy
! Component: 1150  -  total flux cleaned = 0.00753666 Jy
! Component: 1200  -  total flux cleaned = 0.00801758 Jy
! Component: 1250  -  total flux cleaned = 0.00813443 Jy
! Component: 1300  -  total flux cleaned = 0.00825018 Jy
! Component: 1350  -  total flux cleaned = 0.00847971 Jy
! Component: 1400  -  total flux cleaned = 0.00847761 Jy
! Component: 1450  -  total flux cleaned = 0.00836542 Jy
! Component: 1500  -  total flux cleaned = 0.00825563 Jy
! Component: 1550  -  total flux cleaned = 0.00857458 Jy
! Component: 1600  -  total flux cleaned = 0.0083618 Jy
! Component: 1650  -  total flux cleaned = 0.00846497 Jy
! Component: 1700  -  total flux cleaned = 0.00876675 Jy
! Component: 1750  -  total flux cleaned = 0.00856692 Jy
! Component: 1800  -  total flux cleaned = 0.0087653 Jy
! Component: 1850  -  total flux cleaned = 0.00896065 Jy
! Component: 1900  -  total flux cleaned = 0.00934329 Jy
! Component: 1950  -  total flux cleaned = 0.00953235 Jy
! Component: 2000  -  total flux cleaned = 0.00990361 Jy
! Component: 2050  -  total flux cleaned = 0.00990526 Jy
! Component: 2100  -  total flux cleaned = 0.0103581 Jy
! Component: 2150  -  total flux cleaned = 0.0108925 Jy
! Component: 2200  -  total flux cleaned = 0.0109812 Jy
! Component: 2250  -  total flux cleaned = 0.0114149 Jy
! Component: 2300  -  total flux cleaned = 0.0112437 Jy
! Component: 2350  -  total flux cleaned = 0.0117526 Jy
! Component: 2400  -  total flux cleaned = 0.0119199 Jy
! Component: 2450  -  total flux cleaned = 0.0121679 Jy
! Component: 2500  -  total flux cleaned = 0.0121677 Jy
! Component: 2550  -  total flux cleaned = 0.0123289 Jy
! Component: 2600  -  total flux cleaned = 0.012648 Jy
! Component: 2650  -  total flux cleaned = 0.0122544 Jy
! Component: 2700  -  total flux cleaned = 0.0125677 Jy
! Component: 2750  -  total flux cleaned = 0.0127231 Jy
! Component: 2800  -  total flux cleaned = 0.0128765 Jy
! Component: 2850  -  total flux cleaned = 0.0128008 Jy
! Component: 2900  -  total flux cleaned = 0.0129503 Jy
! Component: 2950  -  total flux cleaned = 0.0129508 Jy
! Component: 3000  -  total flux cleaned = 0.0130244 Jy
! Component: 3050  -  total flux cleaned = 0.0130971 Jy
! Component: 3100  -  total flux cleaned = 0.0130256 Jy
! Component: 3150  -  total flux cleaned = 0.0131684 Jy
! Component: 3200  -  total flux cleaned = 0.0132386 Jy
! Component: 3250  -  total flux cleaned = 0.0134476 Jy
! Component: 3300  -  total flux cleaned = 0.0133095 Jy
! Component: 3350  -  total flux cleaned = 0.0134465 Jy
! Component: 3400  -  total flux cleaned = 0.0136511 Jy
! Component: 3450  -  total flux cleaned = 0.0137849 Jy
! Component: 3500  -  total flux cleaned = 0.0137847 Jy
! Component: 3550  -  total flux cleaned = 0.0137192 Jy
! Component: 3600  -  total flux cleaned = 0.0139157 Jy
! Component: 3650  -  total flux cleaned = 0.0138511 Jy
! Component: 3700  -  total flux cleaned = 0.0140447 Jy
! Component: 3750  -  total flux cleaned = 0.0140452 Jy
! Component: 3800  -  total flux cleaned = 0.014235 Jy
! Component: 3850  -  total flux cleaned = 0.0143601 Jy
! Component: 3900  -  total flux cleaned = 0.0142355 Jy
! Component: 3950  -  total flux cleaned = 0.0143597 Jy
! Component: 4000  -  total flux cleaned = 0.0144822 Jy
! Component: 4050  -  total flux cleaned = 0.0144215 Jy
! Total flux subtracted in 4096 components = 0.014482 Jy
! Clean residual min=-0.003179 max=0.003645 Jy/beam
! Clean residual mean=-0.000043 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 2.09671 Jy
keep
! Adding 503 model components to the UV plane model.
! The established model now contains 812 components and 2.09671 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2344+8226_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.44 x 7.091 at -82.76 degrees (North through East)
! Clean map  min=-0.0089302  max=0.67613 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2344+8226_S_map.fits
wmodel /vlbi/uf001/uva//J2344+8226_S_map.mod
! Writing 812 model components to file: /vlbi/uf001/uva//J2344+8226_S_map.mod
wobs   /vlbi/uf001/uva//J2344+8226_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2344+8226_S_uvs.fits
wwins  /vlbi/uf001/uva//J2344+8226_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2344+8226_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.676126 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00138083 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.612682 0.612682 1.22536 2.45073 4.90145 9.80291 19.6058 39.2116 78.4232
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0041 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.676 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  489.65 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2344+8226_S_dfm.log closed on Mon Jan 14 06:50:11 2019