! Started logfile: /vlbi/uf001/uvm//J2330-3724_X_a_dfm.log on Sun Jan 13 22:45:03 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2330-3724_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2330-3724_X_a_uvm.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! AN table 2: 29 integrations on 15 of 15 possible baselines. ! AN table 3: 29 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.852372 visibilities/baseline/integration-bin. ! Found source: J2330-3724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32772 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2330-3724_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 53 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.976165Jy sigma=17.891121 ! Fit after self-cal, rms=0.884929Jy sigma=7.430161 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5915 mas, bmaj=1.843 mas, bpa=-2.043 degrees ! Estimated noise=1.02348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10804 Jy ! Component: 100 - total flux cleaned = 1.42721 Jy ! Total flux subtracted in 100 components = 1.42721 Jy ! Clean residual min=-0.120317 max=0.304617 Jy/beam ! Clean residual mean=0.000622 rms=0.028899 Jy/beam ! Combined flux in latest and established models = 1.42721 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.42721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.675067Jy sigma=5.699508 ! Fit after self-cal, rms=0.674945Jy sigma=5.698501 ! Inverting map ! Added new window around map position (1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226372 Jy ! Component: 100 - total flux cleaned = 0.256319 Jy ! Total flux subtracted in 100 components = 0.256319 Jy ! Clean residual min=-0.114142 max=0.234252 Jy/beam ! Clean residual mean=0.000455 rms=0.023829 Jy/beam ! Combined flux in latest and established models = 1.68353 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 1.68353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.587064Jy sigma=5.088840 ! Fit after self-cal, rms=0.574174Jy sigma=4.962825 ! Inverting map ! Added new window around map position (1.2, 8.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136432 Jy ! Component: 100 - total flux cleaned = 0.165249 Jy ! Total flux subtracted in 100 components = 0.165249 Jy ! Clean residual min=-0.099128 max=0.160288 Jy/beam ! Clean residual mean=0.000348 rms=0.020674 Jy/beam ! Combined flux in latest and established models = 1.84878 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 1.84878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.531062Jy sigma=4.678212 ! Fit after self-cal, rms=0.527241Jy sigma=4.642157 ! Inverting map ! Added new window around map position (-2, -10.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122072 Jy ! Component: 100 - total flux cleaned = 0.140018 Jy ! Total flux subtracted in 100 components = 0.140018 Jy ! Clean residual min=-0.086665 max=0.120356 Jy/beam ! Clean residual mean=0.000259 rms=0.018727 Jy/beam ! Combined flux in latest and established models = 1.9888 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 1.9888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.499555Jy sigma=4.455674 ! Fit after self-cal, rms=0.497448Jy sigma=4.432738 ! Inverting map ! Added new window around map position (-0.2, -6.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728313 Jy ! Component: 100 - total flux cleaned = 0.0884117 Jy ! Total flux subtracted in 100 components = 0.0884117 Jy ! Clean residual min=-0.080053 max=0.121401 Jy/beam ! Clean residual mean=0.000199 rms=0.017280 Jy/beam ! Combined flux in latest and established models = 2.07721 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 2.07721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.478234Jy sigma=4.323219 ! Fit after self-cal, rms=0.475570Jy sigma=4.301821 ! Inverting map ! Added new window around map position (-0.6, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0999937 Jy ! Component: 100 - total flux cleaned = 0.126991 Jy ! Total flux subtracted in 100 components = 0.126991 Jy ! Clean residual min=-0.077294 max=0.089429 Jy/beam ! Clean residual mean=0.000114 rms=0.016089 Jy/beam ! Combined flux in latest and established models = 2.2042 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 2.2042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.456838Jy sigma=4.192082 ! Fit after self-cal, rms=0.456189Jy sigma=4.184186 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8105 mas, bmaj=2.45 mas, bpa=-4.625 degrees ! Estimated noise=0.425679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00246437 Jy ! Component: 100 - total flux cleaned = -0.00117878 Jy ! Component: 150 - total flux cleaned = -0.00114569 Jy ! Component: 200 - total flux cleaned = -0.00111368 Jy ! Total flux subtracted in 200 components = -0.00111368 Jy ! Clean residual min=-0.074462 max=0.110173 Jy/beam ! Clean residual mean=0.000252 rms=0.021222 Jy/beam ! Combined flux in latest and established models = 2.20309 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 2.20309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.450123Jy sigma=4.129466 ! Fit after self-cal, rms=0.450059Jy sigma=4.128091 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8105 x 2.45 at -4.625 degrees (North through East) ! Clean map min=-0.072166 max=1.3337 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.86 HN 1.18 KP 0.86 ! LA 0.92 MK 1.29 NL 1.08 OV 0.83 ! PT 0.85 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.23 KP 1.11 LA 1.07 ! NL 1.21 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 1.06 KP 1.15 LA 1.07 ! MK 0.70 NL 1.69 OV 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.89 HN 1.15 KP 0.87 ! LA 0.90 MK 1.27 NL 1.10 OV 0.82 ! PT 0.85 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.09 HN 1.26 KP 1.04 LA 1.01 ! NL 1.25 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.07 KP 1.15 LA 1.06 ! MK 0.70 NL 1.68 OV 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.88 HN 1.20 KP 0.85 ! LA 0.92 MK 1.36 NL 1.08 OV 0.82 ! PT 0.84 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.11 HN 1.23 KP 1.12 LA 1.03 ! NL 1.25 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.09 KP 1.14 LA 1.08 ! MK 0.70 NL 1.65 OV 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.92 HN 1.18 KP 0.84 ! LA 0.92 MK 1.24 NL 1.05 OV 0.83 ! PT 0.85 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 HN 1.25 KP 1.09 LA 1.01 ! NL 1.25 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.06 KP 1.14 LA 1.08 ! MK 0.69 NL 1.69 OV 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.88 HN 1.22 KP 0.87 ! LA 0.92 MK 1.31 NL 1.06 OV 0.83 ! PT 0.84 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.21 KP 1.13 LA 1.04 ! NL 1.22 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.05 KP 1.15 LA 1.10 ! MK 0.70 NL 1.67 OV 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.88 HN 1.19 KP 0.86 ! LA 0.90 MK 1.28 NL 1.06 OV 0.83 ! PT 0.86 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.11 HN 1.22 KP 1.08 LA 1.05 ! NL 1.26 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.05 KP 1.12 LA 1.09 ! MK 0.68 NL 1.73 OV 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.91 HN 1.18 KP 0.86 ! LA 0.90 MK 1.13 NL 1.07 OV 0.84 ! PT 0.85 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 HN 1.25 KP 1.15 LA 1.06 ! NL 1.23 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.07 KP 1.14 LA 1.05 ! MK 0.61 NL 1.68 OV 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.88 HN 1.19 KP 0.88 ! LA 0.91 MK 1.17 NL 1.07 OV 0.84 ! PT 0.85 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 HN 1.24 KP 1.06 LA 1.03 ! NL 1.27 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.08 KP 1.16 LA 1.04 ! MK 0.63 NL 1.69 OV 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.88 HN 1.16 KP 0.88 ! LA 0.89 MK 1.10 NL 1.07 OV 0.84 ! PT 0.85 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 HN 1.22 KP 1.10 LA 1.04 ! NL 1.29 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.03 KP 1.11 LA 1.08 ! MK 0.66 NL 1.73 OV 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.87 HN 1.22 KP 0.86 ! LA 0.90 MK 1.20 NL 1.09 OV 0.82 ! PT 0.86 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.13 HN 1.23 KP 1.03 LA 1.04 ! NL 1.27 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.04 KP 1.11 LA 1.11 ! MK 0.67 NL 1.70 OV 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.89 HN 1.20 KP 0.87 ! LA 0.91 MK 1.09 NL 1.07 OV 0.83 ! PT 0.84 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 HN 1.23 KP 1.12 LA 1.03 ! NL 1.26 OV 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.03 KP 1.13 LA 1.09 ! MK 0.65 NL 1.73 OV 0.94 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.89 HN 1.17 KP 0.86 ! LA 0.92 MK 1.03 NL 1.08 OV 0.82 ! PT 0.84 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.10 HN 1.25 KP 1.09 LA 1.06 ! NL 1.24 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.04 KP 1.12 LA 1.10 ! MK 0.63 NL 1.72 OV 0.93 ! ! ! Fit before self-cal, rms=0.450059Jy sigma=4.128091 ! Fit after self-cal, rms=0.311682Jy sigma=2.698553 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8201 mas, bmaj=2.437 mas, bpa=-4.938 degrees ! Estimated noise=0.434966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0658564 Jy ! Component: 100 - total flux cleaned = -0.0914795 Jy ! Component: 150 - total flux cleaned = -0.107026 Jy ! Component: 200 - total flux cleaned = -0.120934 Jy ! Total flux subtracted in 200 components = -0.120934 Jy ! Clean residual min=-0.052132 max=0.053522 Jy/beam ! Clean residual mean=-0.000058 rms=0.010897 Jy/beam ! Combined flux in latest and established models = 2.08215 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 2.08215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.285875Jy sigma=2.517236 ! Fit after self-cal, rms=0.285711Jy sigma=2.511975 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.285711Jy sigma=2.511975 ! Fit after self-cal, rms=0.298823Jy sigma=1.833283 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8528 mas, bmaj=2.438 mas, bpa=-4.592 degrees ! Estimated noise=0.446644 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0520671 Jy ! Component: 100 - total flux cleaned = -0.0756708 Jy ! Component: 150 - total flux cleaned = -0.0896466 Jy ! Component: 200 - total flux cleaned = -0.100205 Jy ! Total flux subtracted in 200 components = -0.100205 Jy ! Clean residual min=-0.038825 max=0.038457 Jy/beam ! Clean residual mean=0.000010 rms=0.007696 Jy/beam ! Combined flux in latest and established models = 1.98195 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 1.98195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.285559Jy sigma=1.627374 ! Fit after self-cal, rms=0.284410Jy sigma=1.616408 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251052 Jy ! Component: 100 - total flux cleaned = 0.0295556 Jy ! Component: 150 - total flux cleaned = 0.0280514 Jy ! Component: 200 - total flux cleaned = 0.0287002 Jy ! Total flux subtracted in 200 components = 0.0287002 Jy ! Clean residual min=-0.035935 max=0.030911 Jy/beam ! Clean residual mean=0.000009 rms=0.006851 Jy/beam ! Combined flux in latest and established models = 2.01065 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 2.01065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.277997Jy sigma=1.522423 ! Fit after self-cal, rms=0.277441Jy sigma=1.516149 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.277441Jy sigma=1.516149 ! Fit after self-cal, rms=0.288785Jy sigma=1.463128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8576 mas, bmaj=2.435 mas, bpa=-4.354 degrees ! Estimated noise=0.449709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0296182 Jy ! Component: 100 - total flux cleaned = -0.0402154 Jy ! Component: 150 - total flux cleaned = -0.0432195 Jy ! Component: 200 - total flux cleaned = -0.0445369 Jy ! Total flux subtracted in 200 components = -0.0445369 Jy ! Clean residual min=-0.030945 max=0.028835 Jy/beam ! Clean residual mean=0.000007 rms=0.005941 Jy/beam ! Combined flux in latest and established models = 1.96611 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 1.96611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.283170Jy sigma=1.379196 ! Fit after self-cal, rms=0.282690Jy sigma=1.374930 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00443675 Jy ! Component: 100 - total flux cleaned = -0.00389616 Jy ! Component: 150 - total flux cleaned = -0.00339143 Jy ! Component: 200 - total flux cleaned = -0.00198049 Jy ! Total flux subtracted in 200 components = -0.00198049 Jy ! Clean residual min=-0.029264 max=0.028764 Jy/beam ! Clean residual mean=0.000014 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 1.96413 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 1.96413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280578Jy sigma=1.342094 ! Fit after self-cal, rms=0.280275Jy sigma=1.339823 ! Inverting map ! Added new window around map position (-2.8, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152574 Jy ! Component: 100 - total flux cleaned = 0.018835 Jy ! Component: 150 - total flux cleaned = 0.0200805 Jy ! Component: 200 - total flux cleaned = 0.0190394 Jy ! Total flux subtracted in 200 components = 0.0190394 Jy ! Clean residual min=-0.026930 max=0.023624 Jy/beam ! Clean residual mean=-0.000014 rms=0.005254 Jy/beam ! Combined flux in latest and established models = 1.98317 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 130 components and 1.98317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275668Jy sigma=1.278015 ! Fit after self-cal, rms=0.275233Jy sigma=1.273926 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.275233Jy sigma=1.273926 ! Fit after self-cal, rms=0.281297Jy sigma=1.247550 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.166 mas, bmaj=7.448 mas, bpa=1.151 degrees ! Estimated noise=0.566045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105691 Jy ! Component: 100 - total flux cleaned = -0.0155629 Jy ! Component: 150 - total flux cleaned = -0.018274 Jy ! Component: 200 - total flux cleaned = -0.0194712 Jy ! Total flux subtracted in 200 components = -0.0194712 Jy ! Clean residual min=-0.022368 max=0.020678 Jy/beam ! Clean residual mean=-0.000045 rms=0.005729 Jy/beam ! Combined flux in latest and established models = 1.9637 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 144 components and 1.9637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.280354Jy sigma=1.235480 ! Fit after self-cal, rms=0.280236Jy sigma=1.233412 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00345622 Jy ! Component: 100 - total flux cleaned = -0.00258767 Jy ! Component: 150 - total flux cleaned = -0.00177622 Jy ! Component: 200 - total flux cleaned = -0.0012741 Jy ! Total flux subtracted in 200 components = -0.0012741 Jy ! Clean residual min=-0.021339 max=0.020141 Jy/beam ! Clean residual mean=-0.000038 rms=0.005615 Jy/beam ! Combined flux in latest and established models = 1.96243 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 151 components and 1.96243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.279924Jy sigma=1.230033 ! Fit after self-cal, rms=0.279862Jy sigma=1.229341 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.86 mas, bmaj=2.428 mas, bpa=-4.165 degrees ! Estimated noise=0.450965 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.86 x 2.428 at -4.165 degrees (North through East) ! Clean map min=-0.033322 max=1.4084 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.279862Jy sigma=1.229341 ! Fit after self-cal, rms=0.311149Jy sigma=1.140947 ! Inverting map and beam ! Estimated beam: bmin=0.8617 mas, bmaj=2.43 mas, bpa=-4.138 degrees ! Estimated noise=0.450495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0164841 Jy ! Component: 100 - total flux cleaned = -0.0164896 Jy ! Component: 150 - total flux cleaned = -0.0159994 Jy ! Component: 200 - total flux cleaned = -0.0160321 Jy ! Total flux subtracted in 200 components = -0.0160321 Jy ! Clean residual min=-0.024001 max=0.020694 Jy/beam ! Clean residual mean=-0.000013 rms=0.004381 Jy/beam ! Combined flux in latest and established models = 1.9464 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 154 components and 1.9464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.308592Jy sigma=1.096022 ! Fit after self-cal, rms=0.308331Jy sigma=1.093421 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177576 Jy ! Component: 100 - total flux cleaned = -0.00136472 Jy ! Component: 150 - total flux cleaned = -0.000969735 Jy ! Component: 200 - total flux cleaned = -0.00095797 Jy ! Total flux subtracted in 200 components = -0.00095797 Jy ! Clean residual min=-0.022884 max=0.019907 Jy/beam ! Clean residual mean=-0.000011 rms=0.004239 Jy/beam ! Combined flux in latest and established models = 1.94544 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 159 components and 1.94544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.306837Jy sigma=1.070677 ! Fit after self-cal, rms=0.306649Jy sigma=1.069166 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.306649Jy sigma=1.069166 ! Fit after self-cal, rms=0.309747Jy sigma=1.058346 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.625 mas, bmaj=1.786 mas, bpa=-1.768 degrees ! Estimated noise=1.12039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.20812 Jy ! Component: 100 - total flux cleaned = 1.54565 Jy ! Component: 150 - total flux cleaned = 1.70621 Jy ! Component: 200 - total flux cleaned = 1.79968 Jy ! Total flux subtracted in 200 components = 1.79968 Jy ! Clean residual min=-0.064562 max=0.098608 Jy/beam ! Clean residual mean=0.000080 rms=0.011089 Jy/beam ! Combined flux in latest and established models = 1.79968 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.79968 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8627 mas, bmaj=2.424 mas, bpa=-3.987 degrees ! Estimated noise=0.450923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800326 Jy ! Component: 100 - total flux cleaned = 0.0960488 Jy ! Component: 150 - total flux cleaned = 0.109231 Jy ! Component: 200 - total flux cleaned = 0.114161 Jy ! Total flux subtracted in 200 components = 0.114161 Jy ! Clean residual min=-0.031986 max=0.033533 Jy/beam ! Clean residual mean=-0.000021 rms=0.006485 Jy/beam ! Combined flux in latest and established models = 1.91385 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 1.91385 Jy ! Inverting map ! Added new window around map position (7.6, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117169 Jy ! Component: 100 - total flux cleaned = 0.0143138 Jy ! Component: 150 - total flux cleaned = 0.0166563 Jy ! Component: 200 - total flux cleaned = 0.0177635 Jy ! Total flux subtracted in 200 components = 0.0177635 Jy ! Clean residual min=-0.027202 max=0.026005 Jy/beam ! Clean residual mean=-0.000028 rms=0.005285 Jy/beam ! Combined flux in latest and established models = 1.93161 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 1.93161 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.174 mas, bmaj=7.484 mas, bpa=1.199 degrees ! Estimated noise=0.563021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341541 Jy ! Component: 100 - total flux cleaned = 0.00449504 Jy ! Component: 150 - total flux cleaned = 0.00544659 Jy ! Component: 200 - total flux cleaned = 0.00715875 Jy ! Total flux subtracted in 200 components = 0.00715875 Jy ! Clean residual min=-0.020629 max=0.020207 Jy/beam ! Clean residual mean=-0.000058 rms=0.005090 Jy/beam ! Combined flux in latest and established models = 1.93877 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150905 Jy ! Component: 100 - total flux cleaned = 0.00286932 Jy ! Component: 150 - total flux cleaned = 0.00438933 Jy ! Component: 200 - total flux cleaned = 0.00495697 Jy ! Total flux subtracted in 200 components = 0.00495697 Jy ! Clean residual min=-0.019410 max=0.018878 Jy/beam ! Clean residual mean=-0.000068 rms=0.004826 Jy/beam ! Combined flux in latest and established models = 1.94372 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 1.94372 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8627 mas, bmaj=2.424 mas, bpa=-3.987 degrees ! Estimated noise=0.450923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000905565 Jy ! Component: 100 - total flux cleaned = -0.000894853 Jy ! Component: 150 - total flux cleaned = -0.000161173 Jy ! Component: 200 - total flux cleaned = -0.000833715 Jy ! Total flux subtracted in 200 components = -0.000833715 Jy ! Clean residual min=-0.021919 max=0.020845 Jy/beam ! Clean residual mean=-0.000031 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 1.94289 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 1.94289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.306791Jy sigma=1.075045 ! Fit after self-cal, rms=0.304789Jy sigma=1.061692 wmodel J2330-3724_X_a_map.mod ! Writing 99 model components to file: J2330-3724_X_a_map.mod wobs J2330-3724_X_a_uvs.fits ! Writing UV FITS file: J2330-3724_X_a_uvs.fits wwins J2330-3724_X_a_map.win ! wwins: Wrote 10 windows to J2330-3724_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0040769 Jy ! Component: 100 - total flux cleaned = -0.00373295 Jy ! Component: 150 - total flux cleaned = -0.0030931 Jy ! Component: 200 - total flux cleaned = -0.0027832 Jy ! Component: 250 - total flux cleaned = -0.00278603 Jy ! Component: 300 - total flux cleaned = -0.00360848 Jy ! Component: 350 - total flux cleaned = -0.00465659 Jy ! Component: 400 - total flux cleaned = -0.00592223 Jy ! Component: 450 - total flux cleaned = -0.00764013 Jy ! Component: 500 - total flux cleaned = -0.00907373 Jy ! Component: 550 - total flux cleaned = -0.0104701 Jy ! Component: 600 - total flux cleaned = -0.0120606 Jy ! Component: 650 - total flux cleaned = -0.0138364 Jy ! Component: 700 - total flux cleaned = -0.0157812 Jy ! Component: 750 - total flux cleaned = -0.0172582 Jy ! Component: 800 - total flux cleaned = -0.0184994 Jy ! Component: 850 - total flux cleaned = -0.0203181 Jy ! Component: 900 - total flux cleaned = -0.0217034 Jy ! Component: 950 - total flux cleaned = -0.0234488 Jy ! Component: 1000 - total flux cleaned = -0.0249723 Jy ! Component: 1050 - total flux cleaned = -0.0264706 Jy ! Component: 1100 - total flux cleaned = -0.0279362 Jy ! Component: 1150 - total flux cleaned = -0.0293794 Jy ! Component: 1200 - total flux cleaned = -0.0304439 Jy ! Component: 1250 - total flux cleaned = -0.0318406 Jy ! Component: 1300 - total flux cleaned = -0.0326966 Jy ! Component: 1350 - total flux cleaned = -0.0338804 Jy ! Component: 1400 - total flux cleaned = -0.0352068 Jy ! Component: 1450 - total flux cleaned = -0.0365143 Jy ! Component: 1500 - total flux cleaned = -0.0376406 Jy ! Component: 1550 - total flux cleaned = -0.0384359 Jy ! Component: 1600 - total flux cleaned = -0.0396879 Jy ! Component: 1650 - total flux cleaned = -0.0409184 Jy ! Component: 1700 - total flux cleaned = -0.0422798 Jy ! Component: 1750 - total flux cleaned = -0.0428762 Jy ! Component: 1800 - total flux cleaned = -0.0437608 Jy ! Component: 1850 - total flux cleaned = -0.0444891 Jy ! Component: 1900 - total flux cleaned = -0.045348 Jy ! Component: 1950 - total flux cleaned = -0.0460545 Jy ! Component: 2000 - total flux cleaned = -0.0463309 Jy ! Component: 2050 - total flux cleaned = -0.046746 Jy ! Component: 2100 - total flux cleaned = -0.0475572 Jy ! Component: 2150 - total flux cleaned = -0.047824 Jy ! Component: 2200 - total flux cleaned = -0.0475613 Jy ! Component: 2250 - total flux cleaned = -0.0483446 Jy ! Component: 2300 - total flux cleaned = -0.0480873 Jy ! Component: 2350 - total flux cleaned = -0.0492355 Jy ! Component: 2400 - total flux cleaned = -0.0484775 Jy ! Component: 2450 - total flux cleaned = -0.0489749 Jy ! Component: 2500 - total flux cleaned = -0.0488496 Jy ! Component: 2550 - total flux cleaned = -0.0489692 Jy ! Component: 2600 - total flux cleaned = -0.0494487 Jy ! Component: 2650 - total flux cleaned = -0.0495658 Jy ! Component: 2700 - total flux cleaned = -0.0494478 Jy ! Component: 2750 - total flux cleaned = -0.049797 Jy ! Component: 2800 - total flux cleaned = -0.0500268 Jy ! Component: 2850 - total flux cleaned = -0.0500294 Jy ! Component: 2900 - total flux cleaned = -0.0504791 Jy ! Component: 2950 - total flux cleaned = -0.0504781 Jy ! Component: 3000 - total flux cleaned = -0.0505871 Jy ! Component: 3050 - total flux cleaned = -0.0509149 Jy ! Component: 3100 - total flux cleaned = -0.0509147 Jy ! Component: 3150 - total flux cleaned = -0.0510211 Jy ! Component: 3200 - total flux cleaned = -0.0512322 Jy ! Component: 3250 - total flux cleaned = -0.0516517 Jy ! Component: 3300 - total flux cleaned = -0.0515489 Jy ! Component: 3350 - total flux cleaned = -0.052063 Jy ! Component: 3400 - total flux cleaned = -0.0520639 Jy ! Component: 3450 - total flux cleaned = -0.0525668 Jy ! Component: 3500 - total flux cleaned = -0.0528633 Jy ! Component: 3550 - total flux cleaned = -0.0527666 Jy ! Component: 3600 - total flux cleaned = -0.0529625 Jy ! Component: 3650 - total flux cleaned = -0.0530601 Jy ! Component: 3700 - total flux cleaned = -0.0529647 Jy ! Component: 3750 - total flux cleaned = -0.0537228 Jy ! Component: 3800 - total flux cleaned = -0.0537219 Jy ! Component: 3850 - total flux cleaned = -0.0537211 Jy ! Component: 3900 - total flux cleaned = -0.0538131 Jy ! Component: 3950 - total flux cleaned = -0.0540878 Jy ! Component: 4000 - total flux cleaned = -0.0544486 Jy ! Component: 4050 - total flux cleaned = -0.0543584 Jy ! Total flux subtracted in 4096 components = -0.0542693 Jy ! Clean residual min=-0.004435 max=0.004563 Jy/beam ! Clean residual mean=-0.000010 rms=0.001642 Jy/beam ! Combined flux in latest and established models = 1.88862 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 404 components and 1.88862 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2330-3724_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8627 x 2.424 at -3.987 degrees (North through East) ! Clean map min=-0.024563 max=1.4221 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2330-3724_X_a_map.fits wmodel /vlbi/uf001/uvm//J2330-3724_X_a_map.mod ! Writing 404 model components to file: /vlbi/uf001/uvm//J2330-3724_X_a_map.mod wobs /vlbi/uf001/uvm//J2330-3724_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2330-3724_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2330-3724_X_a_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uvm//J2330-3724_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.42208 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00162607 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343035 0.343035 0.686069 1.37214 2.74428 5.48855 10.9771 21.9542 43.9084 87.8168 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.422 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 874.547 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2330-3724_X_a_dfm.log closed on Sun Jan 13 22:45:09 2019