! Started logfile: /vlbi/uf001/uva//J2330+3348_X_dfm.log on Mon Jan 14 06:44:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2330+3348_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2330+3348_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875146 visibilities/baseline/integration-bin. ! Found source: J2330+3348 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35916 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2330+3348_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.055007Jy sigma=23.200229 ! Fit after self-cal, rms=0.676822Jy sigma=14.978593 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7039 mas, bmaj=1.136 mas, bpa=-5.29 degrees ! Estimated noise=0.36572 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230895 Jy ! Component: 100 - total flux cleaned = 0.319995 Jy ! Total flux subtracted in 100 components = 0.319995 Jy ! Clean residual min=-0.016369 max=0.041896 Jy/beam ! Clean residual mean=0.000007 rms=0.003665 Jy/beam ! Combined flux in latest and established models = 0.319995 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.319995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112051Jy sigma=2.431246 ! Fit after self-cal, rms=0.111642Jy sigma=2.422503 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472176 Jy ! Component: 100 - total flux cleaned = 0.0724028 Jy ! Total flux subtracted in 100 components = 0.0724028 Jy ! Clean residual min=-0.011832 max=0.015347 Jy/beam ! Clean residual mean=0.000005 rms=0.002468 Jy/beam ! Combined flux in latest and established models = 0.392398 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.392398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086338Jy sigma=1.836338 ! Fit after self-cal, rms=0.086219Jy sigma=1.834070 ! Inverting map ! Added new window around map position (10, -13.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177455 Jy ! Component: 100 - total flux cleaned = 0.0302195 Jy ! Total flux subtracted in 100 components = 0.0302195 Jy ! Clean residual min=-0.011032 max=0.011567 Jy/beam ! Clean residual mean=0.000004 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.422617 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.422617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082800Jy sigma=1.743211 ! Fit after self-cal, rms=0.082731Jy sigma=1.741290 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9101 mas, bmaj=1.383 mas, bpa=-6.723 degrees ! Estimated noise=0.196536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900713 Jy ! Component: 100 - total flux cleaned = 0.0148309 Jy ! Component: 150 - total flux cleaned = 0.016906 Jy ! Component: 200 - total flux cleaned = 0.0178742 Jy ! Total flux subtracted in 200 components = 0.0178742 Jy ! Clean residual min=-0.013001 max=0.012059 Jy/beam ! Clean residual mean=0.000005 rms=0.002761 Jy/beam ! Combined flux in latest and established models = 0.440491 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 30 components and 0.440491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081622Jy sigma=1.709474 ! Fit after self-cal, rms=0.081611Jy sigma=1.709175 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9101 x 1.383 at -6.723 degrees (North through East) ! Clean map min=-0.012396 max=0.32206 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.92 KP 0.91 ! LA 0.95 MK 1.01 NL 1.16 OV 0.93 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.92 KP 0.91 ! LA 0.94 MK 1.00 NL 1.16 OV 0.94 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.92 KP 0.91 ! LA 0.97 MK 1.02 NL 1.15 OV 0.94 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.92 KP 0.94 ! LA 0.95 MK 1.03 NL 1.16 OV 0.93 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.92 KP 0.94 ! LA 0.98 MK 0.99 NL 1.15 OV 0.93 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 HN 0.92 KP 0.92 ! LA 0.97 MK 1.02 NL 1.14 OV 0.95 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 0.94 KP 0.92 ! LA 0.97 MK 1.04 NL 1.15 OV 0.92 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 0.94 KP 0.92 ! LA 0.97 MK 1.02 NL 1.15 OV 0.93 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 0.94 KP 0.92 ! LA 0.96 MK 1.03 NL 1.16 OV 0.94 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 0.93 KP 0.93 ! LA 0.97 MK 1.04 NL 1.16 OV 0.96 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.93 KP 0.94 ! LA 0.98 MK 1.05 NL 1.16 OV 0.93 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 0.94 KP 0.92 ! LA 0.97 MK 1.00 NL 1.17 OV 0.94 ! PT 1.00* SC 1.02 ! ! ! Fit before self-cal, rms=0.081611Jy sigma=1.709175 ! Fit after self-cal, rms=0.073471Jy sigma=1.540654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9133 mas, bmaj=1.393 mas, bpa=-6.734 degrees ! Estimated noise=0.194917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00505456 Jy ! Component: 100 - total flux cleaned = -0.00601206 Jy ! Component: 150 - total flux cleaned = -0.00679051 Jy ! Component: 200 - total flux cleaned = -0.0074376 Jy ! Total flux subtracted in 200 components = -0.0074376 Jy ! Clean residual min=-0.010512 max=0.008229 Jy/beam ! Clean residual mean=0.000004 rms=0.001987 Jy/beam ! Combined flux in latest and established models = 0.433054 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.433054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072714Jy sigma=1.528509 ! Fit after self-cal, rms=0.072744Jy sigma=1.528120 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072744Jy sigma=1.528120 ! Fit after self-cal, rms=0.069363Jy sigma=1.350113 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9262 mas, bmaj=1.378 mas, bpa=-6.231 degrees ! Estimated noise=0.195802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00468744 Jy ! Component: 100 - total flux cleaned = -0.00475404 Jy ! Component: 150 - total flux cleaned = -0.0053159 Jy ! Component: 200 - total flux cleaned = -0.00578718 Jy ! Total flux subtracted in 200 components = -0.00578718 Jy ! Clean residual min=-0.002731 max=0.004314 Jy/beam ! Clean residual mean=0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.427267 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.427267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068926Jy sigma=1.339821 ! Fit after self-cal, rms=0.068928Jy sigma=1.338965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344942 Jy ! Component: 100 - total flux cleaned = 0.00395665 Jy ! Component: 150 - total flux cleaned = 0.004243 Jy ! Component: 200 - total flux cleaned = 0.00430713 Jy ! Total flux subtracted in 200 components = 0.00430713 Jy ! Clean residual min=-0.002546 max=0.003097 Jy/beam ! Clean residual mean=0.000001 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.431574 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.431574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068702Jy sigma=1.332592 ! Fit after self-cal, rms=0.068679Jy sigma=1.332211 ! Inverting map ! Added new window around map position (2.6, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101474 Jy ! Component: 100 - total flux cleaned = 0.000731157 Jy ! Component: 150 - total flux cleaned = 0.000669754 Jy ! Component: 200 - total flux cleaned = 0.000724071 Jy ! Total flux subtracted in 200 components = 0.000724071 Jy ! Clean residual min=-0.002309 max=0.002455 Jy/beam ! Clean residual mean=0.000001 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.432298 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 71 components and 0.432298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068495Jy sigma=1.329093 ! Fit after self-cal, rms=0.068485Jy sigma=1.328876 ! Inverting map ! Added new window around map position (0.4, -34.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214338 Jy ! Component: 100 - total flux cleaned = 0.00236889 Jy ! Component: 150 - total flux cleaned = 0.00208022 Jy ! Component: 200 - total flux cleaned = 0.00187351 Jy ! Total flux subtracted in 200 components = 0.00187351 Jy ! Clean residual min=-0.002208 max=0.002350 Jy/beam ! Clean residual mean=0.000000 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.434171 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.434171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068325Jy sigma=1.326183 ! Fit after self-cal, rms=0.068314Jy sigma=1.325916 ! Inverting map ! Added new window around map position (4.4, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144966 Jy ! Component: 100 - total flux cleaned = 0.00139628 Jy ! Component: 150 - total flux cleaned = 0.00134395 Jy ! Component: 200 - total flux cleaned = 0.00115583 Jy ! Total flux subtracted in 200 components = 0.00115583 Jy ! Clean residual min=-0.002095 max=0.002249 Jy/beam ! Clean residual mean=0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.435327 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.435327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068189Jy sigma=1.324330 ! Fit after self-cal, rms=0.068186Jy sigma=1.324220 ! Inverting map ! Added new window around map position (-3.6, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392616 Jy ! Component: 100 - total flux cleaned = 0.000653089 Jy ! Component: 150 - total flux cleaned = 0.000846193 Jy ! Component: 200 - total flux cleaned = 0.000756752 Jy ! Total flux subtracted in 200 components = 0.000756752 Jy ! Clean residual min=-0.002021 max=0.002255 Jy/beam ! Clean residual mean=0.000000 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.436084 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 115 components and 0.436084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068080Jy sigma=1.322104 ! Fit after self-cal, rms=0.068077Jy sigma=1.322052 ! Inverting map ! Added new window around map position (10.2, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157708 Jy ! Component: 100 - total flux cleaned = 0.00199032 Jy ! Component: 150 - total flux cleaned = 0.00211953 Jy ! Component: 200 - total flux cleaned = 0.00231783 Jy ! Total flux subtracted in 200 components = 0.00231783 Jy ! Clean residual min=-0.001944 max=0.001928 Jy/beam ! Clean residual mean=0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.438402 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 0.438402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067986Jy sigma=1.320599 ! Fit after self-cal, rms=0.067989Jy sigma=1.320538 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067989Jy sigma=1.320538 ! Fit after self-cal, rms=0.067519Jy sigma=1.317343 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9221 mas, bmaj=1.374 mas, bpa=-6.003 degrees ! Estimated noise=0.195279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000519886 Jy ! Component: 100 - total flux cleaned = -0.00083996 Jy ! Component: 150 - total flux cleaned = -0.000884528 Jy ! Component: 200 - total flux cleaned = -0.00088419 Jy ! Total flux subtracted in 200 components = -0.00088419 Jy ! Clean residual min=-0.001727 max=0.001734 Jy/beam ! Clean residual mean=0.000000 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.437518 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 142 components and 0.437518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067433Jy sigma=1.315613 ! Fit after self-cal, rms=0.067432Jy sigma=1.315563 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351767 Jy ! Component: 100 - total flux cleaned = 0.000651245 Jy ! Component: 150 - total flux cleaned = 0.000565391 Jy ! Component: 200 - total flux cleaned = 0.00028295 Jy ! Total flux subtracted in 200 components = 0.00028295 Jy ! Clean residual min=-0.001722 max=0.001685 Jy/beam ! Clean residual mean=0.000000 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.437801 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 161 components and 0.437801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067345Jy sigma=1.314104 ! Fit after self-cal, rms=0.067347Jy sigma=1.314064 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067347Jy sigma=1.314064 ! Fit after self-cal, rms=0.067223Jy sigma=1.313729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.975 mas, bmaj=2.353 mas, bpa=0.2591 degrees ! Estimated noise=0.259489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000565149 Jy ! Component: 100 - total flux cleaned = -0.000852898 Jy ! Component: 150 - total flux cleaned = -0.000783125 Jy ! Component: 200 - total flux cleaned = -0.000725982 Jy ! Total flux subtracted in 200 components = -0.000725982 Jy ! Clean residual min=-0.001663 max=0.001606 Jy/beam ! Clean residual mean=0.000000 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.437075 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 187 components and 0.437075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067190Jy sigma=1.313165 ! Fit after self-cal, rms=0.067187Jy sigma=1.313110 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.82963e-05 Jy ! Component: 100 - total flux cleaned = -6.20275e-06 Jy ! Component: 150 - total flux cleaned = -0.00010094 Jy ! Component: 200 - total flux cleaned = -0.00025023 Jy ! Total flux subtracted in 200 components = -0.00025023 Jy ! Clean residual min=-0.001634 max=0.001692 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.436824 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 198 components and 0.436824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067178Jy sigma=1.313007 ! Fit after self-cal, rms=0.067177Jy sigma=1.312994 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9202 mas, bmaj=1.373 mas, bpa=-6.005 degrees ! Estimated noise=0.195171 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9202 x 1.373 at -6.005 degrees (North through East) ! Clean map min=-0.0020052 max=0.32007 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.718 mas, bmaj=1.129 mas, bpa=-5.032 degrees ! Estimated noise=0.361304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.227684 Jy ! Component: 100 - total flux cleaned = 0.314073 Jy ! Component: 150 - total flux cleaned = 0.359547 Jy ! Component: 200 - total flux cleaned = 0.384381 Jy ! Total flux subtracted in 200 components = 0.384381 Jy ! Clean residual min=-0.006338 max=0.012579 Jy/beam ! Clean residual mean=0.000001 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.384381 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.384381 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9202 mas, bmaj=1.373 mas, bpa=-6.005 degrees ! Estimated noise=0.195171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202516 Jy ! Component: 100 - total flux cleaned = 0.0305632 Jy ! Component: 150 - total flux cleaned = 0.0368646 Jy ! Component: 200 - total flux cleaned = 0.0406249 Jy ! Total flux subtracted in 200 components = 0.0406249 Jy ! Clean residual min=-0.002892 max=0.003253 Jy/beam ! Clean residual mean=0.000000 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.425006 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.425006 Jy ! Inverting map ! Added new window around map position (-0.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195897 Jy ! Component: 100 - total flux cleaned = 0.0033564 Jy ! Component: 150 - total flux cleaned = 0.00461585 Jy ! Component: 200 - total flux cleaned = 0.00553188 Jy ! Total flux subtracted in 200 components = 0.00553188 Jy ! Clean residual min=-0.002422 max=0.002630 Jy/beam ! Clean residual mean=0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.430538 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 53 components and 0.430538 Jy ! Inverting map ! Added new window around map position (3, 15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164631 Jy ! Component: 100 - total flux cleaned = 0.00231417 Jy ! Component: 150 - total flux cleaned = 0.00302972 Jy ! Component: 200 - total flux cleaned = 0.00353755 Jy ! Total flux subtracted in 200 components = 0.00353755 Jy ! Clean residual min=-0.002118 max=0.002270 Jy/beam ! Clean residual mean=-0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.434075 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 74 components and 0.434075 Jy ! Inverting map ! Added new window around map position (4.4, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136265 Jy ! Component: 100 - total flux cleaned = 0.00181658 Jy ! Component: 150 - total flux cleaned = 0.00203173 Jy ! Component: 200 - total flux cleaned = 0.002371 Jy ! Total flux subtracted in 200 components = 0.002371 Jy ! Clean residual min=-0.002141 max=0.002042 Jy/beam ! Clean residual mean=0.000000 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.436446 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 94 components and 0.436446 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.975 mas, bmaj=2.353 mas, bpa=0.2591 degrees ! Estimated noise=0.259489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130189 Jy ! Component: 100 - total flux cleaned = 0.00173801 Jy ! Component: 150 - total flux cleaned = 0.00209834 Jy ! Component: 200 - total flux cleaned = 0.00223994 Jy ! Total flux subtracted in 200 components = 0.00223994 Jy ! Clean residual min=-0.001700 max=0.001559 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.438686 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.38289e-05 Jy ! Component: 100 - total flux cleaned = -2.36613e-05 Jy ! Component: 150 - total flux cleaned = -0.000108311 Jy ! Component: 200 - total flux cleaned = -0.000189864 Jy ! Total flux subtracted in 200 components = -0.000189864 Jy ! Clean residual min=-0.001666 max=0.001543 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.438496 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 125 components and 0.438496 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9202 mas, bmaj=1.373 mas, bpa=-6.005 degrees ! Estimated noise=0.195171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148474 Jy ! Component: 100 - total flux cleaned = -0.000206822 Jy ! Component: 150 - total flux cleaned = -0.000320932 Jy ! Component: 200 - total flux cleaned = -0.000375775 Jy ! Total flux subtracted in 200 components = -0.000375775 Jy ! Clean residual min=-0.002081 max=0.001808 Jy/beam ! Clean residual mean=-0.000000 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.43812 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 144 components and 0.43812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067405Jy sigma=1.314788 ! Fit after self-cal, rms=0.067384Jy sigma=1.314304 wmodel J2330+3348_X_map.mod ! Writing 144 model components to file: J2330+3348_X_map.mod wobs J2330+3348_X_uvs.fits ! Writing UV FITS file: J2330+3348_X_uvs.fits wwins J2330+3348_X_map.win ! wwins: Wrote 12 windows to J2330+3348_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000484536 Jy ! Component: 100 - total flux cleaned = -0.00073728 Jy ! Component: 150 - total flux cleaned = -0.000857867 Jy ! Component: 200 - total flux cleaned = -0.00097432 Jy ! Component: 250 - total flux cleaned = -0.00100266 Jy ! Component: 300 - total flux cleaned = -0.000975176 Jy ! Component: 350 - total flux cleaned = -0.000948561 Jy ! Component: 400 - total flux cleaned = -0.00100146 Jy ! Component: 450 - total flux cleaned = -0.00105283 Jy ! Component: 500 - total flux cleaned = -0.00100203 Jy ! Component: 550 - total flux cleaned = -0.00102693 Jy ! Component: 600 - total flux cleaned = -0.000977874 Jy ! Component: 650 - total flux cleaned = -0.000977851 Jy ! Component: 700 - total flux cleaned = -0.000906185 Jy ! Component: 750 - total flux cleaned = -0.000882672 Jy ! Component: 800 - total flux cleaned = -0.000859282 Jy ! Component: 850 - total flux cleaned = -0.000790451 Jy ! Component: 900 - total flux cleaned = -0.000722445 Jy ! Component: 950 - total flux cleaned = -0.000655129 Jy ! Component: 1000 - total flux cleaned = -0.000655214 Jy ! Component: 1050 - total flux cleaned = -0.000567571 Jy ! Component: 1100 - total flux cleaned = -0.000545951 Jy ! Component: 1150 - total flux cleaned = -0.000524517 Jy ! Component: 1200 - total flux cleaned = -0.000461131 Jy ! Component: 1250 - total flux cleaned = -0.00046117 Jy ! Component: 1300 - total flux cleaned = -0.000440576 Jy ! Component: 1350 - total flux cleaned = -0.000440623 Jy ! Component: 1400 - total flux cleaned = -0.000440481 Jy ! Component: 1450 - total flux cleaned = -0.000400104 Jy ! Component: 1500 - total flux cleaned = -0.000400045 Jy ! Component: 1550 - total flux cleaned = -0.000360776 Jy ! Component: 1600 - total flux cleaned = -0.00042007 Jy ! Component: 1650 - total flux cleaned = -0.000420191 Jy ! Component: 1700 - total flux cleaned = -0.000420549 Jy ! Component: 1750 - total flux cleaned = -0.000420732 Jy ! Component: 1800 - total flux cleaned = -0.000401792 Jy ! Component: 1850 - total flux cleaned = -0.000401991 Jy ! Component: 1900 - total flux cleaned = -0.000439294 Jy ! Component: 1950 - total flux cleaned = -0.00042087 Jy ! Component: 2000 - total flux cleaned = -0.000420896 Jy ! Component: 2050 - total flux cleaned = -0.00034819 Jy ! Component: 2100 - total flux cleaned = -0.000474895 Jy ! Component: 2150 - total flux cleaned = -0.000492885 Jy ! Component: 2200 - total flux cleaned = -0.000528291 Jy ! Component: 2250 - total flux cleaned = -0.000422176 Jy ! Component: 2300 - total flux cleaned = -0.000475134 Jy ! Component: 2350 - total flux cleaned = -0.000440046 Jy ! Component: 2400 - total flux cleaned = -0.000422785 Jy ! Component: 2450 - total flux cleaned = -0.000388287 Jy ! Component: 2500 - total flux cleaned = -0.000439575 Jy ! Component: 2550 - total flux cleaned = -0.000371744 Jy ! Component: 2600 - total flux cleaned = -0.000371757 Jy ! Component: 2650 - total flux cleaned = -0.000304704 Jy ! Component: 2700 - total flux cleaned = -0.000288021 Jy ! Component: 2750 - total flux cleaned = -0.000337608 Jy ! Component: 2800 - total flux cleaned = -0.00028837 Jy ! Component: 2850 - total flux cleaned = -0.000255647 Jy ! Component: 2900 - total flux cleaned = -0.000255639 Jy ! Component: 2950 - total flux cleaned = -0.000207314 Jy ! Component: 3000 - total flux cleaned = -0.000207345 Jy ! Component: 3050 - total flux cleaned = -0.000239118 Jy ! Component: 3100 - total flux cleaned = -0.000270807 Jy ! Component: 3150 - total flux cleaned = -0.000191769 Jy ! Component: 3200 - total flux cleaned = -0.000191804 Jy ! Component: 3250 - total flux cleaned = -0.000114001 Jy ! Component: 3300 - total flux cleaned = -0.000114008 Jy ! Component: 3350 - total flux cleaned = -0.000129374 Jy ! Component: 3400 - total flux cleaned = -0.000175186 Jy ! Component: 3450 - total flux cleaned = -0.000144803 Jy ! Component: 3500 - total flux cleaned = -0.000175091 Jy ! Component: 3550 - total flux cleaned = -0.000114965 Jy ! Component: 3600 - total flux cleaned = -0.00014487 Jy ! Component: 3650 - total flux cleaned = -0.00013004 Jy ! Component: 3700 - total flux cleaned = -0.000189182 Jy ! Component: 3750 - total flux cleaned = -0.000115546 Jy ! Component: 3800 - total flux cleaned = -0.000144909 Jy ! Component: 3850 - total flux cleaned = -0.000115691 Jy ! Component: 3900 - total flux cleaned = -0.000130406 Jy ! Component: 3950 - total flux cleaned = -0.000173624 Jy ! Component: 4000 - total flux cleaned = -0.000173522 Jy ! Component: 4050 - total flux cleaned = -0.000102148 Jy ! Total flux subtracted in 4096 components = -0.000173135 Jy ! Clean residual min=-0.000822 max=0.000709 Jy/beam ! Clean residual mean=0.000000 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.437947 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 459 components and 0.437947 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2330+3348_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9202 x 1.373 at -6.005 degrees (North through East) ! Clean map min=-0.0019121 max=0.32031 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2330+3348_X_map.fits wmodel /vlbi/uf001/uva//J2330+3348_X_map.mod ! Writing 459 model components to file: /vlbi/uf001/uva//J2330+3348_X_map.mod wobs /vlbi/uf001/uva//J2330+3348_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2330+3348_X_uvs.fits wwins /vlbi/uf001/uva//J2330+3348_X_map.win ! wwins: Wrote 13 windows to /vlbi/uf001/uva//J2330+3348_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.320306 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241416 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.226111 0.226111 0.452223 0.904445 1.80889 3.61778 7.23556 14.4711 28.9422 57.8845 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.32 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1326.78 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2330+3348_X_dfm.log closed on Mon Jan 14 06:44:28 2019