! Started logfile: /vlbi/uf001/uva//J2328+2937_S_b_dfm.log on Mon Jan 14 06:43:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2328+2937_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2328+2937_S_b_uva.fits ! AN table 1: 98 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.875 visibilities/baseline/integration-bin. ! Found source: J2328+2937 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 7203 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2328+2937_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003047Jy sigma=23.340832 ! Fit after self-cal, rms=0.964213Jy sigma=22.501316 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=8.991 mas, bpa=-9.258 degrees ! Estimated noise=0.533114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283316 Jy ! Component: 100 - total flux cleaned = 0.0346752 Jy ! Total flux subtracted in 100 components = 0.0346752 Jy ! Clean residual min=-0.002757 max=0.002897 Jy/beam ! Clean residual mean=0.000001 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0346752 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0346752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062648Jy sigma=1.197542 ! Fit after self-cal, rms=0.061265Jy sigma=1.163063 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.204 mas, bmaj=9.474 mas, bpa=-7.733 degrees ! Estimated noise=0.371994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404348 Jy ! Component: 100 - total flux cleaned = 0.00439627 Jy ! Component: 150 - total flux cleaned = 0.00430824 Jy ! Component: 200 - total flux cleaned = 0.00425288 Jy ! Total flux subtracted in 200 components = 0.00425288 Jy ! Clean residual min=-0.001662 max=0.002071 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0389281 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.0389281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.060917Jy sigma=1.157383 ! Fit after self-cal, rms=0.060873Jy sigma=1.157095 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.204 x 9.474 at -7.733 degrees (North through East) ! Clean map min=-0.0016049 max=0.038866 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 1.04 KP 0.97 ! LA 0.95 MK 1.01 NL 1.11 OV 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.02 KP 1.00 ! LA 0.92 MK 1.02 NL 0.92 OV 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.99 KP 0.99 ! LA 1.07 MK 1.01 NL 0.96 OV 1.11 ! ! ! Fit before self-cal, rms=0.060873Jy sigma=1.157095 ! Fit after self-cal, rms=0.060006Jy sigma=1.155319 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.227 mas, bmaj=9.424 mas, bpa=-7.663 degrees ! Estimated noise=0.373245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.60784e-05 Jy ! Component: 100 - total flux cleaned = 0.000116726 Jy ! Component: 150 - total flux cleaned = 0.00016511 Jy ! Component: 200 - total flux cleaned = 0.000205058 Jy ! Total flux subtracted in 200 components = 0.000205058 Jy ! Clean residual min=-0.001791 max=0.001932 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0391331 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.0391331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059988Jy sigma=1.155069 ! Fit after self-cal, rms=0.059976Jy sigma=1.154396 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.059976Jy sigma=1.154396 ! Fit after self-cal, rms=0.054674Jy sigma=1.150995 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.242 mas, bmaj=9.39 mas, bpa=-7.708 degrees ! Estimated noise=0.371576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455561 Jy ! Component: 100 - total flux cleaned = 0.000490172 Jy ! Component: 150 - total flux cleaned = 0.000491474 Jy ! Component: 200 - total flux cleaned = 0.000467879 Jy ! Total flux subtracted in 200 components = 0.000467879 Jy ! Clean residual min=-0.001264 max=0.001320 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.039601 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.039601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054665Jy sigma=1.150730 ! Fit after self-cal, rms=0.054605Jy sigma=1.150092 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.36218e-05 Jy ! Component: 100 - total flux cleaned = -2.04063e-05 Jy ! Component: 150 - total flux cleaned = -4.42697e-05 Jy ! Component: 200 - total flux cleaned = -4.50258e-05 Jy ! Total flux subtracted in 200 components = -4.50258e-05 Jy ! Clean residual min=-0.001255 max=0.001323 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.039556 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.039556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054599Jy sigma=1.149928 ! Fit after self-cal, rms=0.054594Jy sigma=1.149890 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.054594Jy sigma=1.149890 ! Fit after self-cal, rms=0.053960Jy sigma=1.149718 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.242 mas, bmaj=9.373 mas, bpa=-7.622 degrees ! Estimated noise=0.370335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334136 Jy ! Component: 100 - total flux cleaned = 0.000415932 Jy ! Component: 150 - total flux cleaned = 0.000460029 Jy ! Component: 200 - total flux cleaned = 0.000460416 Jy ! Total flux subtracted in 200 components = 0.000460416 Jy ! Clean residual min=-0.001265 max=0.001267 Jy/beam ! Clean residual mean=-0.000000 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0400164 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 48 components and 0.0400164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053955Jy sigma=1.149552 ! Fit after self-cal, rms=0.053944Jy sigma=1.149488 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.64437e-05 Jy ! Component: 100 - total flux cleaned = 7.53342e-05 Jy ! Component: 150 - total flux cleaned = 8.34432e-05 Jy ! Component: 200 - total flux cleaned = 6.73647e-05 Jy ! Total flux subtracted in 200 components = 6.73647e-05 Jy ! Clean residual min=-0.001288 max=0.001268 Jy/beam ! Clean residual mean=-0.000001 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0400837 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.0400837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053941Jy sigma=1.149404 ! Fit after self-cal, rms=0.053939Jy sigma=1.149388 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053939Jy sigma=1.149388 ! Fit after self-cal, rms=0.053528Jy sigma=1.149341 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.206 mas, bmaj=10.12 mas, bpa=-13.8 degrees ! Estimated noise=0.4254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025455 Jy ! Component: 100 - total flux cleaned = 0.000222504 Jy ! Component: 150 - total flux cleaned = 0.000222093 Jy ! Component: 200 - total flux cleaned = 0.000229404 Jy ! Total flux subtracted in 200 components = 0.000229404 Jy ! Clean residual min=-0.001439 max=0.001310 Jy/beam ! Clean residual mean=0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0403131 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0403131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053527Jy sigma=1.149242 ! Fit after self-cal, rms=0.053518Jy sigma=1.149193 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1186e-05 Jy ! Component: 100 - total flux cleaned = 2.84378e-05 Jy ! Component: 150 - total flux cleaned = 2.14616e-05 Jy ! Component: 200 - total flux cleaned = 2.73984e-05 Jy ! Total flux subtracted in 200 components = 2.73984e-05 Jy ! Clean residual min=-0.001473 max=0.001297 Jy/beam ! Clean residual mean=0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0403405 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.0403405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053517Jy sigma=1.149152 ! Fit after self-cal, rms=0.053518Jy sigma=1.149136 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.247 mas, bmaj=9.357 mas, bpa=-7.572 degrees ! Estimated noise=0.369302 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.247 x 9.357 at -7.572 degrees (North through East) ! Clean map min=-0.0013574 max=0.038715 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=8.871 mas, bpa=-9.149 degrees ! Estimated noise=0.534919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299404 Jy ! Component: 100 - total flux cleaned = 0.0360053 Jy ! Component: 150 - total flux cleaned = 0.0370665 Jy ! Component: 200 - total flux cleaned = 0.0375741 Jy ! Total flux subtracted in 200 components = 0.0375741 Jy ! Clean residual min=-0.002025 max=0.002221 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.037574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.037574 Jy ! Inverting map and beam ! Estimated beam: bmin=4.247 mas, bmaj=9.357 mas, bpa=-7.572 degrees ! Estimated noise=0.369302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157297 Jy ! Component: 100 - total flux cleaned = 0.00221217 Jy ! Component: 150 - total flux cleaned = 0.00235738 Jy ! Component: 200 - total flux cleaned = 0.00243279 Jy ! Total flux subtracted in 200 components = 0.00243279 Jy ! Clean residual min=-0.001318 max=0.001435 Jy/beam ! Clean residual mean=-0.000000 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0400068 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.0400068 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.206 mas, bmaj=10.12 mas, bpa=-13.8 degrees ! Estimated noise=0.4254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281405 Jy ! Component: 100 - total flux cleaned = 0.000216765 Jy ! Component: 150 - total flux cleaned = 0.000203093 Jy ! Component: 200 - total flux cleaned = 0.00019123 Jy ! Total flux subtracted in 200 components = 0.00019123 Jy ! Clean residual min=-0.001480 max=0.001394 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0401981 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11829e-05 Jy ! Component: 100 - total flux cleaned = 2.09784e-05 Jy ! Component: 150 - total flux cleaned = 2.08966e-05 Jy ! Component: 200 - total flux cleaned = 2.9338e-05 Jy ! Total flux subtracted in 200 components = 2.9338e-05 Jy ! Clean residual min=-0.001477 max=0.001363 Jy/beam ! Clean residual mean=0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0402274 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.0402274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.247 mas, bmaj=9.357 mas, bpa=-7.572 degrees ! Estimated noise=0.369302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215922 Jy ! Component: 100 - total flux cleaned = -0.000182229 Jy ! Component: 150 - total flux cleaned = -0.000123774 Jy ! Component: 200 - total flux cleaned = -7.23934e-05 Jy ! Total flux subtracted in 200 components = -7.23934e-05 Jy ! Clean residual min=-0.001321 max=0.001295 Jy/beam ! Clean residual mean=-0.000000 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 0.040155 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.040155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.053524Jy sigma=1.149356 ! Fit after self-cal, rms=0.053522Jy sigma=1.149302 wmodel J2328+2937_S_b_map.mod ! Writing 46 model components to file: J2328+2937_S_b_map.mod wobs J2328+2937_S_b_uvs.fits ! Writing UV FITS file: J2328+2937_S_b_uvs.fits wwins J2328+2937_S_b_map.win ! wwins: Wrote 1 windows to J2328+2937_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159888 Jy ! Component: 100 - total flux cleaned = 0.000225003 Jy ! Component: 150 - total flux cleaned = 0.000307225 Jy ! Component: 200 - total flux cleaned = 0.000366492 Jy ! Component: 250 - total flux cleaned = 0.000423746 Jy ! Component: 300 - total flux cleaned = 0.000496289 Jy ! Component: 350 - total flux cleaned = 0.000530467 Jy ! Component: 400 - total flux cleaned = 0.000580808 Jy ! Component: 450 - total flux cleaned = 0.000646328 Jy ! Component: 500 - total flux cleaned = 0.000757461 Jy ! Component: 550 - total flux cleaned = 0.000834701 Jy ! Component: 600 - total flux cleaned = 0.000954345 Jy ! Component: 650 - total flux cleaned = 0.00102658 Jy ! Component: 700 - total flux cleaned = 0.00109693 Jy ! Component: 750 - total flux cleaned = 0.00117907 Jy ! Component: 800 - total flux cleaned = 0.00128654 Jy ! Component: 850 - total flux cleaned = 0.00136527 Jy ! Component: 900 - total flux cleaned = 0.00144259 Jy ! Component: 950 - total flux cleaned = 0.00151858 Jy ! Component: 1000 - total flux cleaned = 0.00161808 Jy ! Component: 1050 - total flux cleaned = 0.00171575 Jy ! Component: 1100 - total flux cleaned = 0.00185899 Jy ! Component: 1150 - total flux cleaned = 0.00194104 Jy ! Component: 1200 - total flux cleaned = 0.00207933 Jy ! Component: 1250 - total flux cleaned = 0.00215843 Jy ! Component: 1300 - total flux cleaned = 0.0022812 Jy ! Component: 1350 - total flux cleaned = 0.00238 Jy ! Component: 1400 - total flux cleaned = 0.00248811 Jy ! Component: 1450 - total flux cleaned = 0.00254142 Jy ! Component: 1500 - total flux cleaned = 0.00261498 Jy ! Component: 1550 - total flux cleaned = 0.00268754 Jy ! Component: 1600 - total flux cleaned = 0.00275881 Jy ! Component: 1650 - total flux cleaned = 0.00274874 Jy ! Component: 1700 - total flux cleaned = 0.00278883 Jy ! Component: 1750 - total flux cleaned = 0.00283819 Jy ! Component: 1800 - total flux cleaned = 0.00290651 Jy ! Component: 1850 - total flux cleaned = 0.00293539 Jy ! Component: 1900 - total flux cleaned = 0.00294499 Jy ! Component: 1950 - total flux cleaned = 0.00302018 Jy ! Component: 2000 - total flux cleaned = 0.00304789 Jy ! Component: 2050 - total flux cleaned = 0.00306635 Jy ! Component: 2100 - total flux cleaned = 0.00311175 Jy ! Component: 2150 - total flux cleaned = 0.00312074 Jy ! Component: 2200 - total flux cleaned = 0.00315647 Jy ! Component: 2250 - total flux cleaned = 0.00320944 Jy ! Component: 2300 - total flux cleaned = 0.00322692 Jy ! Component: 2350 - total flux cleaned = 0.00325287 Jy ! Component: 2400 - total flux cleaned = 0.00326153 Jy ! Component: 2450 - total flux cleaned = 0.00329555 Jy ! Component: 2500 - total flux cleaned = 0.00333775 Jy ! Component: 2550 - total flux cleaned = 0.00336279 Jy ! Component: 2600 - total flux cleaned = 0.00342075 Jy ! Component: 2650 - total flux cleaned = 0.00344545 Jy ! Component: 2700 - total flux cleaned = 0.00348613 Jy ! Component: 2750 - total flux cleaned = 0.00350233 Jy ! Component: 2800 - total flux cleaned = 0.00352644 Jy ! Component: 2850 - total flux cleaned = 0.00355032 Jy ! Component: 2900 - total flux cleaned = 0.00357406 Jy ! Component: 2950 - total flux cleaned = 0.00360547 Jy ! Component: 3000 - total flux cleaned = 0.0036445 Jy ! Component: 3050 - total flux cleaned = 0.00364453 Jy ! Component: 3100 - total flux cleaned = 0.00367533 Jy ! Component: 3150 - total flux cleaned = 0.00368297 Jy ! Component: 3200 - total flux cleaned = 0.00370593 Jy ! Component: 3250 - total flux cleaned = 0.00377427 Jy ! Component: 3300 - total flux cleaned = 0.00379692 Jy ! Component: 3350 - total flux cleaned = 0.00384958 Jy ! Component: 3400 - total flux cleaned = 0.00387206 Jy ! Component: 3450 - total flux cleaned = 0.00388701 Jy ! Component: 3500 - total flux cleaned = 0.00394624 Jy ! Component: 3550 - total flux cleaned = 0.00396097 Jy ! Component: 3600 - total flux cleaned = 0.0039903 Jy ! Component: 3650 - total flux cleaned = 0.00400492 Jy ! Component: 3700 - total flux cleaned = 0.00400492 Jy ! Component: 3750 - total flux cleaned = 0.00401216 Jy ! Component: 3800 - total flux cleaned = 0.00402662 Jy ! Component: 3850 - total flux cleaned = 0.00404105 Jy ! Component: 3900 - total flux cleaned = 0.00406254 Jy ! Component: 3950 - total flux cleaned = 0.00409109 Jy ! Component: 4000 - total flux cleaned = 0.00409821 Jy ! Component: 4050 - total flux cleaned = 0.00411234 Jy ! Total flux subtracted in 4096 components = 0.00411231 Jy ! Clean residual min=-0.000410 max=0.000466 Jy/beam ! Clean residual mean=-0.000001 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0442673 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 347 components and 0.0442673 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2328+2937_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.247 x 9.357 at -7.572 degrees (North through East) ! Clean map min=-0.0010577 max=0.038796 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2328+2937_S_b_map.fits wmodel /vlbi/uf001/uva//J2328+2937_S_b_map.mod ! Writing 347 model components to file: /vlbi/uf001/uva//J2328+2937_S_b_map.mod wobs /vlbi/uf001/uva//J2328+2937_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2328+2937_S_b_uvs.fits wwins /vlbi/uf001/uva//J2328+2937_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2328+2937_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0387962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120435 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.931291 0.931291 1.86258 3.72516 7.45032 14.9006 29.8013 59.6026 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.038 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 322.133 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2328+2937_S_b_dfm.log closed on Mon Jan 14 06:43:46 2019