! Started logfile: /vlbi/uf001/uva//J2328+1929_X_dfm.log on Mon Jan 14 06:43:35 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2328+1929_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2328+1929_X_uva.fits
! AN table 1: 72 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.924074 visibilities/baseline/integration-bin.
! Found source: J2328+1929
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 35928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2328+1929_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005944Jy  sigma=21.243492
! Fit after  self-cal, rms=0.927844Jy  sigma=19.517694
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6612 mas, bmaj=1.586 mas, bpa=-4.074 degrees
! Estimated noise=0.313283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0579739 Jy
! Component: 100  -  total flux cleaned = 0.0710768 Jy
! Total flux subtracted in 100 components = 0.0710768 Jy
! Clean residual min=-0.004530 max=0.013495 Jy/beam
! Clean residual mean=0.000004 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.0710768 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0710768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072548Jy  sigma=1.336283
! Fit after  self-cal, rms=0.071960Jy  sigma=1.325369
! Inverting map 
! Added new window around map position (-1, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115151 Jy
! Component: 100  -  total flux cleaned = 0.0173151 Jy
! Total flux subtracted in 100 components = 0.0173151 Jy
! Clean residual min=-0.003498 max=0.006337 Jy/beam
! Clean residual mean=0.000002 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.0883919 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.0883919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070284Jy  sigma=1.272249
! Fit after  self-cal, rms=0.070116Jy  sigma=1.268458
! Inverting map 
! Added new window around map position (-2, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603395 Jy
! Component: 100  -  total flux cleaned = 0.0093764 Jy
! Total flux subtracted in 100 components = 0.0093764 Jy
! Clean residual min=-0.002967 max=0.003475 Jy/beam
! Clean residual mean=0.000001 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.0977683 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.0977683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069746Jy  sigma=1.252825
! Fit after  self-cal, rms=0.069672Jy  sigma=1.251729
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8299 mas, bmaj=1.849 mas, bpa=-3.769 degrees
! Estimated noise=0.182013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030483 Jy
! Component: 100  -  total flux cleaned = 0.00413021 Jy
! Component: 150  -  total flux cleaned = 0.0046385 Jy
! Component: 200  -  total flux cleaned = 0.00476472 Jy
! Total flux subtracted in 200 components = 0.00476472 Jy
! Clean residual min=-0.003297 max=0.003875 Jy/beam
! Clean residual mean=-0.000002 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.102533 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.102533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069587Jy  sigma=1.247059
! Fit after  self-cal, rms=0.069556Jy  sigma=1.246658
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8299 x 1.849 at -3.769 degrees (North through East)
! Clean map  min=-0.0031772  max=0.074754 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        0.98     KP        0.97     
!   LA        2.00     MK        1.04     NL        1.00     OV        0.91     
!   PT        0.90     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        0.95     KP        0.95     
!   LA        1.87     MK        1.04     NL        0.99     OV        0.89     
!   PT        0.86     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.98     KP        0.98     
!   LA        2.05     MK        1.02     NL        0.98     OV        0.88     
!   PT        0.87     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        0.97     KP        0.98     
!   LA        2.15     MK        0.99     NL        1.02     OV        0.90     
!   PT        0.86     SC        0.91     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.92     KP        0.99     
!   LA        1.79     MK        1.01     NL        1.00     OV        0.89     
!   PT        0.91     SC        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        0.97     KP        0.99     
!   LA        1.95     MK        1.03     NL        1.02     OV        0.88     
!   PT        0.91     SC        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.97     HN        0.93     KP        0.98     
!   LA        1.93     MK        1.01     NL        1.03     OV        0.89     
!   PT        0.89     SC        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.95     HN        0.97     KP        0.97     
!   LA        1.67     MK        1.04     NL        1.01     OV        0.90     
!   PT        0.93     SC        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        0.94     KP        0.99     
!   LA        1.66     MK        1.01     NL        1.01     OV        0.88     
!   PT        0.90     SC        0.91     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        0.94     KP        1.02     
!   LA        1.77     MK        1.01     NL        1.03     OV        0.91     
!   PT        0.88     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.95     KP        1.00     
!   LA        1.84     MK        1.01     NL        1.01     OV        0.88     
!   PT        0.88     SC        0.91     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.96     HN        0.97     KP        0.97     
!   LA        1.76     MK        1.00     NL        0.97     OV        0.94     
!   PT        0.89     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.069556Jy  sigma=1.246658
! Fit after  self-cal, rms=0.087033Jy  sigma=1.213880
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8241 mas, bmaj=1.838 mas, bpa=-3.133 degrees
! Estimated noise=0.178104 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135417 Jy
! Component: 100  -  total flux cleaned = 0.00139143 Jy
! Component: 150  -  total flux cleaned = 0.00135975 Jy
! Component: 200  -  total flux cleaned = 0.00128313 Jy
! Total flux subtracted in 200 components = 0.00128313 Jy
! Clean residual min=-0.001516 max=0.001572 Jy/beam
! Clean residual mean=-0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.103816 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.103816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086997Jy  sigma=1.212447
! Fit after  self-cal, rms=0.087353Jy  sigma=1.211146
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087353Jy  sigma=1.211146
! Fit after  self-cal, rms=0.089784Jy  sigma=1.204635
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8234 mas, bmaj=1.832 mas, bpa=-3.06 degrees
! Estimated noise=0.178162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000876583 Jy
! Component: 100  -  total flux cleaned = 0.00106585 Jy
! Component: 150  -  total flux cleaned = 0.0011061 Jy
! Component: 200  -  total flux cleaned = 0.00105899 Jy
! Total flux subtracted in 200 components = 0.00105899 Jy
! Clean residual min=-0.001011 max=0.001100 Jy/beam
! Clean residual mean=-0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.104875 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.104875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089772Jy  sigma=1.204056
! Fit after  self-cal, rms=0.089858Jy  sigma=1.203846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112102 Jy
! Component: 100  -  total flux cleaned = 0.00171661 Jy
! Component: 150  -  total flux cleaned = 0.00205834 Jy
! Component: 200  -  total flux cleaned = 0.00224785 Jy
! Total flux subtracted in 200 components = 0.00224785 Jy
! Clean residual min=-0.000998 max=0.000962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.107123 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.107123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089838Jy  sigma=1.203295
! Fit after  self-cal, rms=0.089835Jy  sigma=1.203252
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089835Jy  sigma=1.203252
! Fit after  self-cal, rms=0.090171Jy  sigma=1.202815
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8227 mas, bmaj=1.831 mas, bpa=-2.97 degrees
! Estimated noise=0.178042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475975 Jy
! Component: 100  -  total flux cleaned = 0.000677072 Jy
! Component: 150  -  total flux cleaned = 0.00083239 Jy
! Component: 200  -  total flux cleaned = 0.000927157 Jy
! Total flux subtracted in 200 components = 0.000927157 Jy
! Clean residual min=-0.000848 max=0.000860 Jy/beam
! Clean residual mean=-0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.10805 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 85 components and 0.10805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090164Jy  sigma=1.202609
! Fit after  self-cal, rms=0.090186Jy  sigma=1.202582
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158017 Jy
! Component: 100  -  total flux cleaned = 0.000245634 Jy
! Component: 150  -  total flux cleaned = 0.000323392 Jy
! Component: 200  -  total flux cleaned = 0.000373367 Jy
! Total flux subtracted in 200 components = 0.000373367 Jy
! Clean residual min=-0.000866 max=0.000853 Jy/beam
! Clean residual mean=-0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.108423 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 92 components and 0.108423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090182Jy  sigma=1.202487
! Fit after  self-cal, rms=0.090181Jy  sigma=1.202478
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090181Jy  sigma=1.202478
! Fit after  self-cal, rms=0.090370Jy  sigma=1.202459
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.902 mas, bmaj=2.656 mas, bpa=-2.097 degrees
! Estimated noise=0.25041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000489301 Jy
! Component: 100  -  total flux cleaned = 0.000713102 Jy
! Component: 150  -  total flux cleaned = 0.000833957 Jy
! Component: 200  -  total flux cleaned = 0.000879598 Jy
! Total flux subtracted in 200 components = 0.000879598 Jy
! Clean residual min=-0.001266 max=0.001265 Jy/beam
! Clean residual mean=-0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.109303 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 104 components and 0.109303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090367Jy  sigma=1.202460
! Fit after  self-cal, rms=0.090370Jy  sigma=1.202452
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.04275e-05 Jy
! Component: 100  -  total flux cleaned = 0.000174976 Jy
! Component: 150  -  total flux cleaned = 0.00021307 Jy
! Component: 200  -  total flux cleaned = 0.000235829 Jy
! Total flux subtracted in 200 components = 0.000235829 Jy
! Clean residual min=-0.001288 max=0.001272 Jy/beam
! Clean residual mean=-0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.109539 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 111 components and 0.109539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090369Jy  sigma=1.202456
! Fit after  self-cal, rms=0.090368Jy  sigma=1.202450
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=1.83 mas, bpa=-2.94 degrees
! Estimated noise=0.178032 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8222 x 1.83 at -2.94 degrees (North through East)
! Clean map  min=-0.0007967  max=0.073408 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6581 mas, bmaj=1.573 mas, bpa=-3.225 degrees
! Estimated noise=0.302409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558401 Jy
! Component: 100  -  total flux cleaned = 0.0738377 Jy
! Component: 150  -  total flux cleaned = 0.0834179 Jy
! Component: 200  -  total flux cleaned = 0.0893925 Jy
! Total flux subtracted in 200 components = 0.0893925 Jy
! Clean residual min=-0.001879 max=0.003226 Jy/beam
! Clean residual mean=0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.0893925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0893925 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=1.83 mas, bpa=-2.94 degrees
! Estimated noise=0.178032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00600106 Jy
! Component: 100  -  total flux cleaned = 0.00961875 Jy
! Component: 150  -  total flux cleaned = 0.0118995 Jy
! Component: 200  -  total flux cleaned = 0.0135403 Jy
! Total flux subtracted in 200 components = 0.0135403 Jy
! Clean residual min=-0.000952 max=0.001026 Jy/beam
! Clean residual mean=-0.000000 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.102933 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 29 components and 0.102933 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.902 mas, bmaj=2.656 mas, bpa=-2.097 degrees
! Estimated noise=0.25041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217669 Jy
! Component: 100  -  total flux cleaned = 0.00349908 Jy
! Component: 150  -  total flux cleaned = 0.00441624 Jy
! Component: 200  -  total flux cleaned = 0.00508741 Jy
! Total flux subtracted in 200 components = 0.00508741 Jy
! Clean residual min=-0.001327 max=0.001182 Jy/beam
! Clean residual mean=-0.000001 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.10802 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000493003 Jy
! Component: 100  -  total flux cleaned = 0.000739014 Jy
! Component: 150  -  total flux cleaned = 0.000917939 Jy
! Component: 200  -  total flux cleaned = 0.001048 Jy
! Total flux subtracted in 200 components = 0.001048 Jy
! Clean residual min=-0.001294 max=0.001210 Jy/beam
! Clean residual mean=-0.000001 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.109068 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 69 components and 0.109068 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8222 mas, bmaj=1.83 mas, bpa=-2.94 degrees
! Estimated noise=0.178032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000193377 Jy
! Component: 100  -  total flux cleaned = -0.000195244 Jy
! Component: 150  -  total flux cleaned = -0.000182258 Jy
! Component: 200  -  total flux cleaned = -0.000182603 Jy
! Total flux subtracted in 200 components = -0.000182603 Jy
! Clean residual min=-0.000837 max=0.000892 Jy/beam
! Clean residual mean=-0.000000 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.108886 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.108886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090374Jy  sigma=1.202526
! Fit after  self-cal, rms=0.090373Jy  sigma=1.202437
wmodel J2328+1929_X_map.mod
! Writing 85 model components to file: J2328+1929_X_map.mod
wobs   J2328+1929_X_uvs.fits
! Writing UV FITS file: J2328+1929_X_uvs.fits
wwins  J2328+1929_X_map.win
! wwins: Wrote 4 windows to J2328+1929_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233505 Jy
! Component: 100  -  total flux cleaned = 0.000218266 Jy
! Component: 150  -  total flux cleaned = 0.000218024 Jy
! Component: 200  -  total flux cleaned = 0.000189578 Jy
! Component: 250  -  total flux cleaned = 0.000175722 Jy
! Component: 300  -  total flux cleaned = 0.000122081 Jy
! Component: 350  -  total flux cleaned = 0.000122292 Jy
! Component: 400  -  total flux cleaned = 0.00014795 Jy
! Component: 450  -  total flux cleaned = 0.00014798 Jy
! Component: 500  -  total flux cleaned = 0.000173016 Jy
! Component: 550  -  total flux cleaned = 0.000172955 Jy
! Component: 600  -  total flux cleaned = 0.000160909 Jy
! Component: 650  -  total flux cleaned = 0.000184729 Jy
! Component: 700  -  total flux cleaned = 0.00016107 Jy
! Component: 750  -  total flux cleaned = 0.000137836 Jy
! Component: 800  -  total flux cleaned = 0.000103487 Jy
! Component: 850  -  total flux cleaned = 0.000160273 Jy
! Component: 900  -  total flux cleaned = 0.000148895 Jy
! Component: 950  -  total flux cleaned = 0.000148991 Jy
! Component: 1000  -  total flux cleaned = 0.00019292 Jy
! Component: 1050  -  total flux cleaned = 0.000171046 Jy
! Component: 1100  -  total flux cleaned = 0.00017104 Jy
! Component: 1150  -  total flux cleaned = 0.000181643 Jy
! Component: 1200  -  total flux cleaned = 0.000192187 Jy
! Component: 1250  -  total flux cleaned = 0.000223725 Jy
! Component: 1300  -  total flux cleaned = 0.000192395 Jy
! Component: 1350  -  total flux cleaned = 0.000254482 Jy
! Component: 1400  -  total flux cleaned = 0.000213714 Jy
! Component: 1450  -  total flux cleaned = 0.000213791 Jy
! Component: 1500  -  total flux cleaned = 0.000254025 Jy
! Component: 1550  -  total flux cleaned = 0.000224066 Jy
! Component: 1600  -  total flux cleaned = 0.000273787 Jy
! Component: 1650  -  total flux cleaned = 0.000263944 Jy
! Component: 1700  -  total flux cleaned = 0.000273828 Jy
! Component: 1750  -  total flux cleaned = 0.000312649 Jy
! Component: 1800  -  total flux cleaned = 0.000302945 Jy
! Component: 1850  -  total flux cleaned = 0.000322096 Jy
! Component: 1900  -  total flux cleaned = 0.000350523 Jy
! Component: 1950  -  total flux cleaned = 0.000293884 Jy
! Component: 2000  -  total flux cleaned = 0.000284424 Jy
! Component: 2050  -  total flux cleaned = 0.000275122 Jy
! Component: 2100  -  total flux cleaned = 0.000247499 Jy
! Component: 2150  -  total flux cleaned = 0.000265912 Jy
! Component: 2200  -  total flux cleaned = 0.000229275 Jy
! Component: 2250  -  total flux cleaned = 0.000220295 Jy
! Component: 2300  -  total flux cleaned = 0.000157099 Jy
! Component: 2350  -  total flux cleaned = 0.000166046 Jy
! Component: 2400  -  total flux cleaned = 0.000139346 Jy
! Component: 2450  -  total flux cleaned = 0.000165943 Jy
! Component: 2500  -  total flux cleaned = 0.000130778 Jy
! Component: 2550  -  total flux cleaned = 0.000130801 Jy
! Component: 2600  -  total flux cleaned = 0.000139433 Jy
! Component: 2650  -  total flux cleaned = 0.000139425 Jy
! Component: 2700  -  total flux cleaned = 0.000105002 Jy
! Component: 2750  -  total flux cleaned = 0.000122084 Jy
! Component: 2800  -  total flux cleaned = 0.00011349 Jy
! Component: 2850  -  total flux cleaned = 6.27611e-05 Jy
! Component: 2900  -  total flux cleaned = 5.43966e-05 Jy
! Component: 2950  -  total flux cleaned = 5.4485e-05 Jy
! Component: 3000  -  total flux cleaned = 5.44314e-05 Jy
! Component: 3050  -  total flux cleaned = 5.44535e-05 Jy
! Component: 3100  -  total flux cleaned = 7.09314e-05 Jy
! Component: 3150  -  total flux cleaned = 4.63012e-05 Jy
! Component: 3200  -  total flux cleaned = 5.44663e-05 Jy
! Component: 3250  -  total flux cleaned = 3.82302e-05 Jy
! Component: 3300  -  total flux cleaned = 5.94593e-06 Jy
! Component: 3350  -  total flux cleaned = 3.80917e-05 Jy
! Component: 3400  -  total flux cleaned = 3.00307e-05 Jy
! Component: 3450  -  total flux cleaned = 1.41961e-05 Jy
! Component: 3500  -  total flux cleaned = -9.43868e-06 Jy
! Component: 3550  -  total flux cleaned = 2.98774e-05 Jy
! Component: 3600  -  total flux cleaned = -1.45505e-06 Jy
! Component: 3650  -  total flux cleaned = 1.40969e-05 Jy
! Component: 3700  -  total flux cleaned = 4.50983e-05 Jy
! Component: 3750  -  total flux cleaned = 2.96455e-05 Jy
! Component: 3800  -  total flux cleaned = 2.95957e-05 Jy
! Component: 3850  -  total flux cleaned = 4.4834e-05 Jy
! Component: 3900  -  total flux cleaned = 3.71937e-05 Jy
! Component: 3950  -  total flux cleaned = 4.4755e-05 Jy
! Component: 4000  -  total flux cleaned = 5.22956e-05 Jy
! Component: 4050  -  total flux cleaned = 5.98478e-05 Jy
! Total flux subtracted in 4096 components = 5.24247e-05 Jy
! Clean residual min=-0.000461 max=0.000433 Jy/beam
! Clean residual mean=-0.000000 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.108938 Jy
keep
! Adding 345 model components to the UV plane model.
! The established model now contains 430 components and 0.108938 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2328+1929_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8222 x 1.83 at -2.94 degrees (North through East)
! Clean map  min=-0.00065331  max=0.072992 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2328+1929_X_map.fits
wmodel /vlbi/uf001/uva//J2328+1929_X_map.mod
! Writing 430 model components to file: /vlbi/uf001/uva//J2328+1929_X_map.mod
wobs   /vlbi/uf001/uva//J2328+1929_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2328+1929_X_uvs.fits
wwins  /vlbi/uf001/uva//J2328+1929_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2328+1929_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0729917 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131089 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.538784 0.538784 1.07757 2.15514 4.31027 8.62054 17.2411 34.4822 68.9643
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  556.809 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2328+1929_X_dfm.log closed on Mon Jan 14 06:43:41 2019