! Started logfile: /vlbi/uf001/uva//J2325-4051_X_b_dfm.log on Mon Jan 14 06:42:13 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2325-4051_X_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2325-4051_X_b_uva.fits
! AN table 1: 148 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.7 visibilities/baseline/integration-bin.
! Found source: J2325-4051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 18648 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2325-4051_X_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 168 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003002Jy  sigma=16.732045
! Fit after  self-cal, rms=0.939564Jy  sigma=15.653318
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.499 mas, bmaj=16.59 mas, bpa=2.234 degrees
! Estimated noise=0.654925 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0502826 Jy
! Component: 100  -  total flux cleaned = 0.0708149 Jy
! Total flux subtracted in 100 components = 0.0708149 Jy
! Clean residual min=-0.011980 max=0.011929 Jy/beam
! Clean residual mean=-0.001349 rms=0.005451 Jy/beam
! Combined flux in latest and established models = 0.0708149 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 54 components and 0.0708149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081483Jy  sigma=1.335140
! Fit after  self-cal, rms=0.080334Jy  sigma=1.317266
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.64 mas, bmaj=17.25 mas, bpa=2.033 degrees
! Estimated noise=0.319075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015814 Jy
! Component: 100  -  total flux cleaned = 0.0255777 Jy
! Component: 150  -  total flux cleaned = 0.034474 Jy
! Component: 200  -  total flux cleaned = 0.0417688 Jy
! Total flux subtracted in 200 components = 0.0417688 Jy
! Clean residual min=-0.006108 max=0.006088 Jy/beam
! Clean residual mean=-0.000763 rms=0.003233 Jy/beam
! Combined flux in latest and established models = 0.112584 Jy
! Performing phase self-cal
! Adding 161 model components to the UV plane model.
! The established model now contains 214 components and 0.112584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073180Jy  sigma=1.186628
! Fit after  self-cal, rms=0.072786Jy  sigma=1.177971
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.64 x 17.25 at 2.033 degrees (North through East)
! Clean map  min=-0.010349  max=0.06282 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.26     LA        0.78     NL        1.16     
!   OV        1.21     PT        0.78     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.32     LA        0.82     NL        1.18     
!   OV        1.17     PT        0.80     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.29     LA        0.82     NL        1.16     
!   OV        1.12     PT        0.82     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.27     LA        0.85     NL        1.10     
!   OV        1.20     PT        0.76     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.30     LA        0.78     NL        1.13     
!   OV        1.22     PT        0.84     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.30     LA        0.78     NL        1.10     
!   OV        1.18     PT        0.80     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        1.30     LA        0.77     NL        1.19     
!   OV        1.20     PT        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.24     LA        0.83     NL        0.99     
!   OV        1.11     PT        0.80     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.20     LA        0.80     NL        1.10     
!   OV        1.26     PT        0.84     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.22     LA        0.76     NL        1.03     
!   OV        1.17     PT        0.87     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.25     LA        0.79     NL        0.95     
!   OV        1.14     PT        0.85     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.22     LA        0.84     NL        1.01     
!   OV        1.12     PT        0.80     
! 
! 
! Fit before self-cal, rms=0.072786Jy  sigma=1.177971
! Fit after  self-cal, rms=0.073391Jy  sigma=1.120625
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.787 mas, bmaj=17.91 mas, bpa=2.23 degrees
! Estimated noise=0.313699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000631488 Jy
! Component: 100  -  total flux cleaned = -0.00013488 Jy
! Component: 150  -  total flux cleaned = 0.000170662 Jy
! Component: 200  -  total flux cleaned = 0.000349501 Jy
! Total flux subtracted in 200 components = 0.000349501 Jy
! Clean residual min=-0.001421 max=0.001428 Jy/beam
! Clean residual mean=-0.000080 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.112933 Jy
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 299 components and 0.112933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073076Jy  sigma=1.113887
! Fit after  self-cal, rms=0.073715Jy  sigma=1.109261
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073715Jy  sigma=1.109261
! Fit after  self-cal, rms=0.075496Jy  sigma=1.107239
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=17.86 mas, bpa=2.173 degrees
! Estimated noise=0.317328 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200926 Jy
! Component: 100  -  total flux cleaned = 0.00313724 Jy
! Component: 150  -  total flux cleaned = 0.00374625 Jy
! Component: 200  -  total flux cleaned = 0.00411895 Jy
! Total flux subtracted in 200 components = 0.00411895 Jy
! Clean residual min=-0.000714 max=0.000720 Jy/beam
! Clean residual mean=-0.000034 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.117052 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 361 components and 0.117052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075355Jy  sigma=1.105201
! Fit after  self-cal, rms=0.075530Jy  sigma=1.104018
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000899449 Jy
! Component: 100  -  total flux cleaned = 0.00185397 Jy
! Component: 150  -  total flux cleaned = 0.00229675 Jy
! Component: 200  -  total flux cleaned = 0.00225891 Jy
! Total flux subtracted in 200 components = 0.00225891 Jy
! Clean residual min=-0.000652 max=0.000650 Jy/beam
! Clean residual mean=-0.000018 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.119311 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 407 components and 0.119311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075428Jy  sigma=1.102707
! Fit after  self-cal, rms=0.075511Jy  sigma=1.102228
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075511Jy  sigma=1.102228
! Fit after  self-cal, rms=0.075976Jy  sigma=1.102051
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=17.89 mas, bpa=2.145 degrees
! Estimated noise=0.317007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00124438 Jy
! Component: 100  -  total flux cleaned = 0.00202557 Jy
! Component: 150  -  total flux cleaned = 0.00211448 Jy
! Component: 200  -  total flux cleaned = 0.0017959 Jy
! Total flux subtracted in 200 components = 0.0017959 Jy
! Clean residual min=-0.000567 max=0.000565 Jy/beam
! Clean residual mean=-0.000011 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.121107 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 463 components and 0.121107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075907Jy  sigma=1.101207
! Fit after  self-cal, rms=0.076002Jy  sigma=1.100887
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000535797 Jy
! Component: 100  -  total flux cleaned = 0.00104817 Jy
! Component: 150  -  total flux cleaned = 0.00138507 Jy
! Component: 200  -  total flux cleaned = 0.00158382 Jy
! Total flux subtracted in 200 components = 0.00158382 Jy
! Clean residual min=-0.000529 max=0.000531 Jy/beam
! Clean residual mean=-0.000005 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.122691 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 514 components and 0.122691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075948Jy  sigma=1.100283
! Fit after  self-cal, rms=0.076000Jy  sigma=1.100120
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076000Jy  sigma=1.100120
! Fit after  self-cal, rms=0.076312Jy  sigma=1.100045
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=18.54 mas, bpa=3.024 degrees
! Estimated noise=0.315318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000675687 Jy
! Component: 100  -  total flux cleaned = 0.000752912 Jy
! Component: 150  -  total flux cleaned = 0.000756626 Jy
! Component: 200  -  total flux cleaned = 0.000520885 Jy
! Total flux subtracted in 200 components = 0.000520885 Jy
! Clean residual min=-0.000465 max=0.000462 Jy/beam
! Clean residual mean=-0.000003 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.123212 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 554 components and 0.123212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076271Jy  sigma=1.099596
! Fit after  self-cal, rms=0.076329Jy  sigma=1.099431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000359371 Jy
! Component: 100  -  total flux cleaned = 0.000592022 Jy
! Component: 150  -  total flux cleaned = 0.000827308 Jy
! Component: 200  -  total flux cleaned = 0.00116988 Jy
! Total flux subtracted in 200 components = 0.00116988 Jy
! Clean residual min=-0.000419 max=0.000422 Jy/beam
! Clean residual mean=0.000000 rms=0.000182 Jy/beam
! Combined flux in latest and established models = 0.124382 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 588 components and 0.124381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076295Jy  sigma=1.099082
! Fit after  self-cal, rms=0.076329Jy  sigma=1.098999
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.781 mas, bmaj=17.92 mas, bpa=2.111 degrees
! Estimated noise=0.317037 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.781 x 17.92 at 2.111 degrees (North through East)
! Clean map  min=-0.0056874  max=0.057868 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.615 mas, bmaj=17.06 mas, bpa=2.389 degrees
! Estimated noise=0.644318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453204 Jy
! Component: 100  -  total flux cleaned = 0.0597238 Jy
! Component: 150  -  total flux cleaned = 0.0672727 Jy
! Component: 200  -  total flux cleaned = 0.072298 Jy
! Total flux subtracted in 200 components = 0.072298 Jy
! Clean residual min=-0.006791 max=0.006819 Jy/beam
! Clean residual mean=-0.000717 rms=0.003039 Jy/beam
! Combined flux in latest and established models = 0.072298 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 116 model components to the UV plane model.
! The established model now contains 116 components and 0.072298 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.781 mas, bmaj=17.92 mas, bpa=2.111 degrees
! Estimated noise=0.317037 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00755004 Jy
! Component: 100  -  total flux cleaned = 0.0141379 Jy
! Component: 150  -  total flux cleaned = 0.0195535 Jy
! Component: 200  -  total flux cleaned = 0.0212683 Jy
! Total flux subtracted in 200 components = 0.0212683 Jy
! Clean residual min=-0.003180 max=0.003218 Jy/beam
! Clean residual mean=-0.000270 rms=0.001494 Jy/beam
! Combined flux in latest and established models = 0.0935663 Jy
! Adding 118 model components to the UV plane model.
! The established model now contains 234 components and 0.0935663 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.151 mas, bmaj=18.54 mas, bpa=3.024 degrees
! Estimated noise=0.315318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454902 Jy
! Component: 100  -  total flux cleaned = 0.0069923 Jy
! Component: 150  -  total flux cleaned = 0.00882122 Jy
! Component: 200  -  total flux cleaned = 0.0101819 Jy
! Total flux subtracted in 200 components = 0.0101819 Jy
! Clean residual min=-0.001755 max=0.001761 Jy/beam
! Clean residual mean=-0.000152 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.103748 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811348 Jy
! Component: 100  -  total flux cleaned = 0.00135574 Jy
! Component: 150  -  total flux cleaned = 0.00135624 Jy
! Component: 200  -  total flux cleaned = 0.00158966 Jy
! Total flux subtracted in 200 components = 0.00158966 Jy
! Clean residual min=-0.001267 max=0.001267 Jy/beam
! Clean residual mean=-0.000087 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.105338 Jy
! Adding 164 model components to the UV plane model.
! The established model now contains 386 components and 0.105338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.781 mas, bmaj=17.92 mas, bpa=2.111 degrees
! Estimated noise=0.317037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104948 Jy
! Component: 100  -  total flux cleaned = -0.00154805 Jy
! Component: 150  -  total flux cleaned = -0.00192446 Jy
! Component: 200  -  total flux cleaned = -0.00233636 Jy
! Total flux subtracted in 200 components = -0.00233636 Jy
! Clean residual min=-0.000644 max=0.000648 Jy/beam
! Clean residual mean=-0.000043 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.103001 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 467 components and 0.103001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076341Jy  sigma=1.099391
! Fit after  self-cal, rms=0.076358Jy  sigma=1.098898
wmodel J2325-4051_X_b_map.mod
! Writing 467 model components to file: J2325-4051_X_b_map.mod
wobs   J2325-4051_X_b_uvs.fits
! Writing UV FITS file: J2325-4051_X_b_uvs.fits
wwins  J2325-4051_X_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/uf001/uva//J2325-4051_X_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.781 x 17.92 at 2.111 degrees (North through East)
! Clean map  min=-0.0058613  max=0.053275 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2325-4051_X_b_map.fits
wmodel /vlbi/uf001/uva//J2325-4051_X_b_map.mod
! Writing 467 model components to file: /vlbi/uf001/uva//J2325-4051_X_b_map.mod
wobs   /vlbi/uf001/uva//J2325-4051_X_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2325-4051_X_b_uvs.fits
wwins  /vlbi/uf001/uva//J2325-4051_X_b_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0532747 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000308478 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.7371 1.7371 3.47419 6.94839 13.8968 27.7936 55.5871
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.053 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  172.701 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2325-4051_X_b_dfm.log closed on Mon Jan 14 06:42:18 2019