! Started logfile: /vlbi/uf001/uva//J2324-2119_S_dfm.log on Mon Jan 14 06:41:20 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2324-2119_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2324-2119_S_uva.fits
! AN table 1: 38 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.854637 visibilities/baseline/integration-bin.
! Found source: J2324-2119
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2046 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2324-2119_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002412Jy  sigma=19.152548
! Fit after  self-cal, rms=0.906761Jy  sigma=17.260993
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.638 mas, bmaj=32.62 mas, bpa=-8.058 degrees
! Estimated noise=1.07567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0720542 Jy
! Component: 100  -  total flux cleaned = 0.0918181 Jy
! Total flux subtracted in 100 components = 0.0918181 Jy
! Clean residual min=-0.006583 max=0.008961 Jy/beam
! Clean residual mean=0.000000 rms=0.002080 Jy/beam
! Combined flux in latest and established models = 0.0918181 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0918181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.072098Jy  sigma=1.342978
! Fit after  self-cal, rms=0.071697Jy  sigma=1.338289
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.314 mas, bmaj=32.47 mas, bpa=-7.801 degrees
! Estimated noise=0.838146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130804 Jy
! Component: 100  -  total flux cleaned = 0.0202248 Jy
! Component: 150  -  total flux cleaned = 0.0240962 Jy
! Component: 200  -  total flux cleaned = 0.024571 Jy
! Total flux subtracted in 200 components = 0.024571 Jy
! Clean residual min=-0.004576 max=0.005797 Jy/beam
! Clean residual mean=-0.000009 rms=0.001351 Jy/beam
! Combined flux in latest and established models = 0.116389 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 55 components and 0.116389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069498Jy  sigma=1.287585
! Fit after  self-cal, rms=0.069470Jy  sigma=1.286467
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.314 x 32.47 at -7.801 degrees (North through East)
! Clean map  min=-0.0046447  max=0.097172 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     HN        1.02     KP        0.98     LA        0.93     
!   NL        1.08     OV        1.00     PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     HN        1.00     KP        1.00     LA        0.99     
!   NL        1.12     OV        0.96     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     HN        1.15     KP        1.03     LA        0.99     
!   NL        0.97     OV        1.00     PT        1.05     
! 
! 
! Fit before self-cal, rms=0.069470Jy  sigma=1.286467
! Fit after  self-cal, rms=0.069702Jy  sigma=1.278099
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.405 mas, bmaj=32.4 mas, bpa=-7.761 degrees
! Estimated noise=0.830291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00261347 Jy
! Component: 100  -  total flux cleaned = -0.00429941 Jy
! Component: 150  -  total flux cleaned = -0.00499717 Jy
! Component: 200  -  total flux cleaned = -0.00528819 Jy
! Total flux subtracted in 200 components = -0.00528819 Jy
! Clean residual min=-0.003422 max=0.004215 Jy/beam
! Clean residual mean=-0.000006 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 0.111101 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 86 components and 0.111101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069583Jy  sigma=1.275775
! Fit after  self-cal, rms=0.069666Jy  sigma=1.275347
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069666Jy  sigma=1.275347
! Fit after  self-cal, rms=0.069588Jy  sigma=1.273269
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.416 mas, bmaj=32.36 mas, bpa=-7.745 degrees
! Estimated noise=0.826174 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0016814 Jy
! Component: 100  -  total flux cleaned = -0.00244858 Jy
! Component: 150  -  total flux cleaned = -0.00258702 Jy
! Component: 200  -  total flux cleaned = -0.00270997 Jy
! Total flux subtracted in 200 components = -0.00270997 Jy
! Clean residual min=-0.003319 max=0.004024 Jy/beam
! Clean residual mean=-0.000005 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.108391 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 105 components and 0.108391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069535Jy  sigma=1.272302
! Fit after  self-cal, rms=0.069555Jy  sigma=1.272187
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233657 Jy
! Component: 100  -  total flux cleaned = -0.000261646 Jy
! Component: 150  -  total flux cleaned = -0.000364484 Jy
! Component: 200  -  total flux cleaned = -0.000480767 Jy
! Total flux subtracted in 200 components = -0.000480767 Jy
! Clean residual min=-0.003326 max=0.003882 Jy/beam
! Clean residual mean=-0.000005 rms=0.001018 Jy/beam
! Combined flux in latest and established models = 0.10791 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 129 components and 0.10791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069534Jy  sigma=1.271757
! Fit after  self-cal, rms=0.069532Jy  sigma=1.271698
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069532Jy  sigma=1.271698
! Fit after  self-cal, rms=0.069533Jy  sigma=1.270757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.429 mas, bmaj=32.34 mas, bpa=-7.732 degrees
! Estimated noise=0.822371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119596 Jy
! Component: 100  -  total flux cleaned = -0.00180684 Jy
! Component: 150  -  total flux cleaned = -0.00192666 Jy
! Component: 200  -  total flux cleaned = -0.00203558 Jy
! Total flux subtracted in 200 components = -0.00203558 Jy
! Clean residual min=-0.003292 max=0.003771 Jy/beam
! Clean residual mean=-0.000003 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.105875 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 151 components and 0.105875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069505Jy  sigma=1.270329
! Fit after  self-cal, rms=0.069521Jy  sigma=1.270251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.84145e-05 Jy
! Component: 100  -  total flux cleaned = -0.000208565 Jy
! Component: 150  -  total flux cleaned = -0.000307755 Jy
! Component: 200  -  total flux cleaned = -0.000398271 Jy
! Total flux subtracted in 200 components = -0.000398271 Jy
! Clean residual min=-0.003303 max=0.003675 Jy/beam
! Clean residual mean=-0.000003 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.105476 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 163 components and 0.105476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069509Jy  sigma=1.270014
! Fit after  self-cal, rms=0.069507Jy  sigma=1.269976
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069507Jy  sigma=1.269976
! Fit after  self-cal, rms=0.069602Jy  sigma=1.269846
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.787 mas, bmaj=32.27 mas, bpa=-7.768 degrees
! Estimated noise=0.866457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224147 Jy
! Component: 100  -  total flux cleaned = -0.000416346 Jy
! Component: 150  -  total flux cleaned = -0.0005772 Jy
! Component: 200  -  total flux cleaned = -0.00062784 Jy
! Total flux subtracted in 200 components = -0.00062784 Jy
! Clean residual min=-0.003709 max=0.003618 Jy/beam
! Clean residual mean=-0.000001 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 0.104849 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 200 components and 0.104849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069602Jy  sigma=1.269714
! Fit after  self-cal, rms=0.069611Jy  sigma=1.269633
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104159 Jy
! Component: 100  -  total flux cleaned = -0.000152643 Jy
! Component: 150  -  total flux cleaned = -0.000173059 Jy
! Component: 200  -  total flux cleaned = -0.000193325 Jy
! Total flux subtracted in 200 components = -0.000193325 Jy
! Clean residual min=-0.003697 max=0.003561 Jy/beam
! Clean residual mean=-0.000001 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.104655 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 221 components and 0.104655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069612Jy  sigma=1.269599
! Fit after  self-cal, rms=0.069610Jy  sigma=1.269566
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.443 mas, bmaj=32.32 mas, bpa=-7.734 degrees
! Estimated noise=0.820459 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.443 x 32.32 at -7.734 degrees (North through East)
! Clean map  min=-0.0068229  max=0.095812 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.73 mas, bmaj=32.45 mas, bpa=-8.028 degrees
! Estimated noise=1.06932 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0715901 Jy
! Component: 100  -  total flux cleaned = 0.0900905 Jy
! Component: 150  -  total flux cleaned = 0.0990272 Jy
! Component: 200  -  total flux cleaned = 0.101535 Jy
! Total flux subtracted in 200 components = 0.101535 Jy
! Clean residual min=-0.004642 max=0.006101 Jy/beam
! Clean residual mean=-0.000004 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.101535 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.101535 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.443 mas, bmaj=32.32 mas, bpa=-7.734 degrees
! Estimated noise=0.820459 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, 1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00579169 Jy
! Component: 100  -  total flux cleaned = 0.00659046 Jy
! Component: 150  -  total flux cleaned = 0.00634997 Jy
! Component: 200  -  total flux cleaned = 0.00613295 Jy
! Total flux subtracted in 200 components = 0.00613295 Jy
! Clean residual min=-0.003362 max=0.002627 Jy/beam
! Clean residual mean=-0.000001 rms=0.000945 Jy/beam
! Combined flux in latest and established models = 0.107668 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 87 components and 0.107668 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.787 mas, bmaj=32.27 mas, bpa=-7.768 degrees
! Estimated noise=0.866457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559796 Jy
! Component: 100  -  total flux cleaned = 0.000655794 Jy
! Component: 150  -  total flux cleaned = 0.000446096 Jy
! Component: 200  -  total flux cleaned = 0.000442435 Jy
! Total flux subtracted in 200 components = 0.000442435 Jy
! Clean residual min=-0.003121 max=0.002738 Jy/beam
! Clean residual mean=0.000003 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.108111 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.94757e-05 Jy
! Component: 100  -  total flux cleaned = 0.000198873 Jy
! Component: 150  -  total flux cleaned = 0.000287465 Jy
! Component: 200  -  total flux cleaned = 0.000397205 Jy
! Total flux subtracted in 200 components = 0.000397205 Jy
! Clean residual min=-0.002942 max=0.002659 Jy/beam
! Clean residual mean=0.000004 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.108508 Jy
! Adding 114 model components to the UV plane model.
! The established model now contains 194 components and 0.108508 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.443 mas, bmaj=32.32 mas, bpa=-7.734 degrees
! Estimated noise=0.820459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119784 Jy
! Component: 100  -  total flux cleaned = 8.63568e-05 Jy
! Component: 150  -  total flux cleaned = 0.000158646 Jy
! Component: 200  -  total flux cleaned = 0.000158104 Jy
! Total flux subtracted in 200 components = 0.000158104 Jy
! Clean residual min=-0.002451 max=0.002559 Jy/beam
! Clean residual mean=0.000003 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.108666 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 221 components and 0.108666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069385Jy  sigma=1.264910
! Fit after  self-cal, rms=0.069339Jy  sigma=1.264363
wmodel J2324-2119_S_map.mod
! Writing 221 model components to file: J2324-2119_S_map.mod
wobs   J2324-2119_S_uvs.fits
! Writing UV FITS file: J2324-2119_S_uvs.fits
wwins  J2324-2119_S_map.win
! wwins: Wrote 2 windows to J2324-2119_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369443 Jy
! Component: 100  -  total flux cleaned = -0.000661944 Jy
! Component: 150  -  total flux cleaned = -0.00089527 Jy
! Component: 200  -  total flux cleaned = -0.00107635 Jy
! Component: 250  -  total flux cleaned = -0.00118204 Jy
! Component: 300  -  total flux cleaned = -0.00131752 Jy
! Component: 350  -  total flux cleaned = -0.00148021 Jy
! Component: 400  -  total flux cleaned = -0.00169903 Jy
! Component: 450  -  total flux cleaned = -0.00191005 Jy
! Component: 500  -  total flux cleaned = -0.0021128 Jy
! Component: 550  -  total flux cleaned = -0.00230862 Jy
! Component: 600  -  total flux cleaned = -0.00247106 Jy
! Component: 650  -  total flux cleaned = -0.00268004 Jy
! Component: 700  -  total flux cleaned = -0.00288219 Jy
! Component: 750  -  total flux cleaned = -0.00312814 Jy
! Component: 800  -  total flux cleaned = -0.00324803 Jy
! Component: 850  -  total flux cleaned = -0.00345822 Jy
! Component: 900  -  total flux cleaned = -0.00366257 Jy
! Component: 950  -  total flux cleaned = -0.00377302 Jy
! Component: 1000  -  total flux cleaned = -0.00390298 Jy
! Component: 1050  -  total flux cleaned = -0.0040726 Jy
! Component: 1100  -  total flux cleaned = -0.00423753 Jy
! Component: 1150  -  total flux cleaned = -0.00431828 Jy
! Component: 1200  -  total flux cleaned = -0.00441732 Jy
! Component: 1250  -  total flux cleaned = -0.00453382 Jy
! Component: 1300  -  total flux cleaned = -0.00464728 Jy
! Component: 1350  -  total flux cleaned = -0.00475788 Jy
! Component: 1400  -  total flux cleaned = -0.00481214 Jy
! Component: 1450  -  total flux cleaned = -0.00490072 Jy
! Component: 1500  -  total flux cleaned = -0.00498774 Jy
! Component: 1550  -  total flux cleaned = -0.00505595 Jy
! Component: 1600  -  total flux cleaned = -0.00513968 Jy
! Component: 1650  -  total flux cleaned = -0.0052056 Jy
! Component: 1700  -  total flux cleaned = -0.00528625 Jy
! Component: 1750  -  total flux cleaned = -0.00527035 Jy
! Component: 1800  -  total flux cleaned = -0.00533311 Jy
! Component: 1850  -  total flux cleaned = -0.00534876 Jy
! Component: 1900  -  total flux cleaned = -0.00539472 Jy
! Component: 1950  -  total flux cleaned = -0.00540946 Jy
! Component: 2000  -  total flux cleaned = -0.00543905 Jy
! Component: 2050  -  total flux cleaned = -0.00545356 Jy
! Component: 2100  -  total flux cleaned = -0.00543911 Jy
! Component: 2150  -  total flux cleaned = -0.00552414 Jy
! Component: 2200  -  total flux cleaned = -0.00551022 Jy
! Component: 2250  -  total flux cleaned = -0.00553825 Jy
! Component: 2300  -  total flux cleaned = -0.00555208 Jy
! Component: 2350  -  total flux cleaned = -0.00557924 Jy
! Component: 2400  -  total flux cleaned = -0.0056325 Jy
! Component: 2450  -  total flux cleaned = -0.00563262 Jy
! Component: 2500  -  total flux cleaned = -0.00568471 Jy
! Component: 2550  -  total flux cleaned = -0.00569764 Jy
! Component: 2600  -  total flux cleaned = -0.00574863 Jy
! Component: 2650  -  total flux cleaned = -0.00578626 Jy
! Component: 2700  -  total flux cleaned = -0.00577367 Jy
! Component: 2750  -  total flux cleaned = -0.00579832 Jy
! Component: 2800  -  total flux cleaned = -0.00582283 Jy
! Component: 2850  -  total flux cleaned = -0.00582286 Jy
! Component: 2900  -  total flux cleaned = -0.00584672 Jy
! Component: 2950  -  total flux cleaned = -0.00582329 Jy
! Component: 3000  -  total flux cleaned = -0.00579989 Jy
! Component: 3050  -  total flux cleaned = -0.00577675 Jy
! Component: 3100  -  total flux cleaned = -0.00575387 Jy
! Component: 3150  -  total flux cleaned = -0.00576521 Jy
! Component: 3200  -  total flux cleaned = -0.00573136 Jy
! Component: 3250  -  total flux cleaned = -0.00570884 Jy
! Component: 3300  -  total flux cleaned = -0.00565337 Jy
! Component: 3350  -  total flux cleaned = -0.00563146 Jy
! Component: 3400  -  total flux cleaned = -0.00557701 Jy
! Component: 3450  -  total flux cleaned = -0.00559871 Jy
! Component: 3500  -  total flux cleaned = -0.00557708 Jy
! Component: 3550  -  total flux cleaned = -0.00556639 Jy
! Component: 3600  -  total flux cleaned = -0.00554509 Jy
! Component: 3650  -  total flux cleaned = -0.00555568 Jy
! Component: 3700  -  total flux cleaned = -0.00555571 Jy
! Component: 3750  -  total flux cleaned = -0.00556608 Jy
! Component: 3800  -  total flux cleaned = -0.00556599 Jy
! Component: 3850  -  total flux cleaned = -0.00556595 Jy
! Component: 3900  -  total flux cleaned = -0.00555571 Jy
! Component: 3950  -  total flux cleaned = -0.00556582 Jy
! Component: 4000  -  total flux cleaned = -0.00553559 Jy
! Component: 4050  -  total flux cleaned = -0.0055356 Jy
! Total flux subtracted in 4096 components = -0.00553553 Jy
! Clean residual min=-0.000658 max=0.000707 Jy/beam
! Clean residual mean=0.000004 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.103131 Jy
keep
! Adding 448 model components to the UV plane model.
! The established model now contains 669 components and 0.103131 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2324-2119_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.443 x 32.32 at -7.734 degrees (North through East)
! Clean map  min=-0.0051252  max=0.095318 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2324-2119_S_map.fits
wmodel /vlbi/uf001/uva//J2324-2119_S_map.mod
! Writing 669 model components to file: /vlbi/uf001/uva//J2324-2119_S_map.mod
wobs   /vlbi/uf001/uva//J2324-2119_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2324-2119_S_uvs.fits
wwins  /vlbi/uf001/uva//J2324-2119_S_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2324-2119_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0953181 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000216343 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.680908 0.680908 1.36182 2.72363 5.44726 10.8945 21.7891 43.5781 87.1562
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.095 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  440.588 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2324-2119_S_dfm.log closed on Mon Jan 14 06:41:25 2019