! Started logfile: /vlbi/uf001/uva//J2322-0737_S_dfm.log on Mon Jan 14 06:40:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2322-0737_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2322-0737_S_uva.fits
! AN table 1: 58 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.977833 visibilities/baseline/integration-bin.
! Found source: J2322-0737
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4764 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2322-0737_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011878Jy  sigma=20.435610
! Fit after  self-cal, rms=0.863324Jy  sigma=17.396202
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.694 mas, bmaj=15 mas, bpa=-17.93 degrees
! Estimated noise=0.716564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109087 Jy
! Component: 100  -  total flux cleaned = 0.132929 Jy
! Total flux subtracted in 100 components = 0.132929 Jy
! Clean residual min=-0.007236 max=0.013587 Jy/beam
! Clean residual mean=-0.000003 rms=0.002123 Jy/beam
! Combined flux in latest and established models = 0.132929 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.132929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078128Jy  sigma=1.320449
! Fit after  self-cal, rms=0.077968Jy  sigma=1.319256
! Inverting map 
! Added new window around map position (19.5, -45).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00888303 Jy
! Component: 100  -  total flux cleaned = 0.0100101 Jy
! Total flux subtracted in 100 components = 0.0100101 Jy
! Clean residual min=-0.006488 max=0.009806 Jy/beam
! Clean residual mean=-0.000005 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 0.142939 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.142939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.075711Jy  sigma=1.288535
! Fit after  self-cal, rms=0.075542Jy  sigma=1.283512
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=14.42 mas, bpa=-17.18 degrees
! Estimated noise=0.534008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0053013 Jy
! Component: 100  -  total flux cleaned = 0.00667498 Jy
! Component: 150  -  total flux cleaned = 0.00694421 Jy
! Component: 200  -  total flux cleaned = 0.00693779 Jy
! Total flux subtracted in 200 components = 0.00693779 Jy
! Clean residual min=-0.006915 max=0.006591 Jy/beam
! Clean residual mean=-0.000009 rms=0.001485 Jy/beam
! Combined flux in latest and established models = 0.149877 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.149877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074547Jy  sigma=1.270868
! Fit after  self-cal, rms=0.074515Jy  sigma=1.269891
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.129 x 14.42 at -17.18 degrees (North through East)
! Clean map  min=-0.0068072  max=0.13468 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     HN        1.04     KP        0.92     
!   LA        0.92     MK        1.00     NL        1.04     OV        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.06     HN        1.01     KP        0.94     
!   LA        0.96     MK        1.01     NL        1.01     OV        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.99     KP        0.91     
!   LA        0.98     MK        1.03     NL        1.06     OV        1.03     
! 
! 
! Fit before self-cal, rms=0.074515Jy  sigma=1.269891
! Fit after  self-cal, rms=0.074977Jy  sigma=1.256778
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.152 mas, bmaj=14.48 mas, bpa=-17.18 degrees
! Estimated noise=0.532359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000656875 Jy
! Component: 100  -  total flux cleaned = -0.00156082 Jy
! Component: 150  -  total flux cleaned = -0.00238086 Jy
! Component: 200  -  total flux cleaned = -0.00273195 Jy
! Total flux subtracted in 200 components = -0.00273195 Jy
! Clean residual min=-0.004616 max=0.004653 Jy/beam
! Clean residual mean=-0.000006 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.147145 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 59 components and 0.147145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074585Jy  sigma=1.253984
! Fit after  self-cal, rms=0.074614Jy  sigma=1.253610
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.074614Jy  sigma=1.253610
! Fit after  self-cal, rms=0.080188Jy  sigma=1.230134
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=14.76 mas, bpa=-17.25 degrees
! Estimated noise=0.539868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000677872 Jy
! Component: 100  -  total flux cleaned = -0.000684103 Jy
! Component: 150  -  total flux cleaned = -0.000623659 Jy
! Component: 200  -  total flux cleaned = -0.000623101 Jy
! Total flux subtracted in 200 components = -0.000623101 Jy
! Clean residual min=-0.003439 max=0.003251 Jy/beam
! Clean residual mean=-0.000004 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.146522 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 78 components and 0.146522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080029Jy  sigma=1.227790
! Fit after  self-cal, rms=0.080117Jy  sigma=1.227462
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244457 Jy
! Component: 100  -  total flux cleaned = -6.67091e-05 Jy
! Component: 150  -  total flux cleaned = 1.28347e-05 Jy
! Component: 200  -  total flux cleaned = 8.72271e-05 Jy
! Total flux subtracted in 200 components = 8.72271e-05 Jy
! Clean residual min=-0.003294 max=0.002931 Jy/beam
! Clean residual mean=-0.000004 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.146609 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.146609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080064Jy  sigma=1.226613
! Fit after  self-cal, rms=0.080052Jy  sigma=1.226584
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080052Jy  sigma=1.226584
! Fit after  self-cal, rms=0.081964Jy  sigma=1.225437
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.145 mas, bmaj=14.8 mas, bpa=-17.25 degrees
! Estimated noise=0.539506 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375884 Jy
! Component: 100  -  total flux cleaned = -0.000223295 Jy
! Component: 150  -  total flux cleaned = -4.30155e-05 Jy
! Component: 200  -  total flux cleaned = 0.000111153 Jy
! Total flux subtracted in 200 components = 0.000111153 Jy
! Clean residual min=-0.003020 max=0.002659 Jy/beam
! Clean residual mean=-0.000003 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.14672 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.14672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081867Jy  sigma=1.224224
! Fit after  self-cal, rms=0.081848Jy  sigma=1.224149
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205506 Jy
! Component: 100  -  total flux cleaned = -4.20004e-05 Jy
! Component: 150  -  total flux cleaned = 4.574e-05 Jy
! Component: 200  -  total flux cleaned = 9.95442e-05 Jy
! Total flux subtracted in 200 components = 9.95442e-05 Jy
! Clean residual min=-0.002946 max=0.002581 Jy/beam
! Clean residual mean=-0.000003 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.146819 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 119 components and 0.146819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081816Jy  sigma=1.223717
! Fit after  self-cal, rms=0.081801Jy  sigma=1.223695
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.081801Jy  sigma=1.223695
! Fit after  self-cal, rms=0.082671Jy  sigma=1.223277
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.023 mas, bmaj=15.76 mas, bpa=-9.084 degrees
! Estimated noise=0.676026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00076573 Jy
! Component: 100  -  total flux cleaned = -0.000850928 Jy
! Component: 150  -  total flux cleaned = -0.000884825 Jy
! Component: 200  -  total flux cleaned = -0.000717937 Jy
! Total flux subtracted in 200 components = -0.000717937 Jy
! Clean residual min=-0.003322 max=0.003658 Jy/beam
! Clean residual mean=-0.000004 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.146102 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.146102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082631Jy  sigma=1.222942
! Fit after  self-cal, rms=0.082591Jy  sigma=1.222846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148436 Jy
! Component: 100  -  total flux cleaned = -2.67043e-05 Jy
! Component: 150  -  total flux cleaned = 8.45905e-05 Jy
! Component: 200  -  total flux cleaned = 0.000166931 Jy
! Total flux subtracted in 200 components = 0.000166931 Jy
! Clean residual min=-0.003316 max=0.003694 Jy/beam
! Clean residual mean=-0.000004 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.146268 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 155 components and 0.146268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082577Jy  sigma=1.222751
! Fit after  self-cal, rms=0.082560Jy  sigma=1.222742
! Inverting map 
! Added new window around map position (1.5, -99.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143474 Jy
! Component: 100  -  total flux cleaned = 0.00118956 Jy
! Component: 150  -  total flux cleaned = 0.000971301 Jy
! Component: 200  -  total flux cleaned = 0.000564197 Jy
! Total flux subtracted in 200 components = 0.000564197 Jy
! Clean residual min=-0.002822 max=0.002409 Jy/beam
! Clean residual mean=-0.000003 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.146833 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 190 components and 0.146833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082380Jy  sigma=1.220320
! Fit after  self-cal, rms=0.082338Jy  sigma=1.220176
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.145 mas, bmaj=14.82 mas, bpa=-17.26 degrees
! Estimated noise=0.538776 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.145 x 14.82 at -17.26 degrees (North through East)
! Clean map  min=-0.0025021  max=0.13577 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.706 mas, bmaj=15.22 mas, bpa=-18.03 degrees
! Estimated noise=0.721502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109665 Jy
! Component: 100  -  total flux cleaned = 0.134608 Jy
! Component: 150  -  total flux cleaned = 0.142393 Jy
! Component: 200  -  total flux cleaned = 0.145156 Jy
! Total flux subtracted in 200 components = 0.145156 Jy
! Clean residual min=-0.004358 max=0.003338 Jy/beam
! Clean residual mean=-0.000000 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.145156 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.145156 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.145 mas, bmaj=14.82 mas, bpa=-17.26 degrees
! Estimated noise=0.538776 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000891687 Jy
! Component: 100  -  total flux cleaned = 0.000891795 Jy
! Component: 150  -  total flux cleaned = 0.000972784 Jy
! Component: 200  -  total flux cleaned = 0.0010539 Jy
! Total flux subtracted in 200 components = 0.0010539 Jy
! Clean residual min=-0.003009 max=0.002159 Jy/beam
! Clean residual mean=-0.000002 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 0.14621 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 69 components and 0.146209 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.023 mas, bmaj=15.76 mas, bpa=-9.084 degrees
! Estimated noise=0.676026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000590152 Jy
! Component: 100  -  total flux cleaned = 0.00106059 Jy
! Component: 150  -  total flux cleaned = 0.00153903 Jy
! Component: 200  -  total flux cleaned = 0.0015453 Jy
! Total flux subtracted in 200 components = 0.0015453 Jy
! Clean residual min=-0.003189 max=0.002497 Jy/beam
! Clean residual mean=-0.000002 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.147755 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.02305e-07 Jy
! Component: 100  -  total flux cleaned = -0.000155781 Jy
! Component: 150  -  total flux cleaned = -0.000528077 Jy
! Component: 200  -  total flux cleaned = -0.000700637 Jy
! Total flux subtracted in 200 components = -0.000700637 Jy
! Clean residual min=-0.002943 max=0.002269 Jy/beam
! Clean residual mean=-0.000002 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.147054 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 141 components and 0.147054 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.145 mas, bmaj=14.82 mas, bpa=-17.26 degrees
! Estimated noise=0.538776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000585369 Jy
! Component: 100  -  total flux cleaned = -0.00054061 Jy
! Component: 150  -  total flux cleaned = -0.000498573 Jy
! Component: 200  -  total flux cleaned = -0.000378532 Jy
! Total flux subtracted in 200 components = -0.000378532 Jy
! Clean residual min=-0.002486 max=0.001843 Jy/beam
! Clean residual mean=-0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.146676 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 169 components and 0.146676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082287Jy  sigma=1.219445
! Fit after  self-cal, rms=0.082204Jy  sigma=1.219124
wmodel J2322-0737_S_map.mod
! Writing 169 model components to file: J2322-0737_S_map.mod
wobs   J2322-0737_S_uvs.fits
! Writing UV FITS file: J2322-0737_S_uvs.fits
wwins  J2322-0737_S_map.win
! wwins: Wrote 3 windows to J2322-0737_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000813895 Jy
! Component: 100  -  total flux cleaned = -0.000682984 Jy
! Component: 150  -  total flux cleaned = -0.000529126 Jy
! Component: 200  -  total flux cleaned = -0.00038343 Jy
! Component: 250  -  total flux cleaned = -0.000327974 Jy
! Component: 300  -  total flux cleaned = -0.000196162 Jy
! Component: 350  -  total flux cleaned = -0.000196671 Jy
! Component: 400  -  total flux cleaned = -0.000221416 Jy
! Component: 450  -  total flux cleaned = -0.00019756 Jy
! Component: 500  -  total flux cleaned = -0.000244826 Jy
! Component: 550  -  total flux cleaned = -0.00022227 Jy
! Component: 600  -  total flux cleaned = -0.000222259 Jy
! Component: 650  -  total flux cleaned = -0.000243914 Jy
! Component: 700  -  total flux cleaned = -0.000264797 Jy
! Component: 750  -  total flux cleaned = -0.000264648 Jy
! Component: 800  -  total flux cleaned = -0.000284815 Jy
! Component: 850  -  total flux cleaned = -0.000244365 Jy
! Component: 900  -  total flux cleaned = -0.000224909 Jy
! Component: 950  -  total flux cleaned = -0.000225204 Jy
! Component: 1000  -  total flux cleaned = -0.000225579 Jy
! Component: 1050  -  total flux cleaned = -0.000244513 Jy
! Component: 1100  -  total flux cleaned = -0.000263126 Jy
! Component: 1150  -  total flux cleaned = -0.000281336 Jy
! Component: 1200  -  total flux cleaned = -0.000245804 Jy
! Component: 1250  -  total flux cleaned = -0.000263711 Jy
! Component: 1300  -  total flux cleaned = -0.000246442 Jy
! Component: 1350  -  total flux cleaned = -0.000212223 Jy
! Component: 1400  -  total flux cleaned = -0.000144941 Jy
! Component: 1450  -  total flux cleaned = -9.52434e-05 Jy
! Component: 1500  -  total flux cleaned = -7.88272e-05 Jy
! Component: 1550  -  total flux cleaned = -6.26494e-05 Jy
! Component: 1600  -  total flux cleaned = -1.51051e-05 Jy
! Component: 1650  -  total flux cleaned = -3.05287e-05 Jy
! Component: 1700  -  total flux cleaned = 4.6508e-05 Jy
! Component: 1750  -  total flux cleaned = 3.11655e-05 Jy
! Component: 1800  -  total flux cleaned = 6.15059e-05 Jy
! Component: 1850  -  total flux cleaned = 9.11354e-05 Jy
! Component: 1900  -  total flux cleaned = 0.000105846 Jy
! Component: 1950  -  total flux cleaned = 0.000120283 Jy
! Component: 2000  -  total flux cleaned = 0.000134526 Jy
! Component: 2050  -  total flux cleaned = 0.000148359 Jy
! Component: 2100  -  total flux cleaned = 0.000148394 Jy
! Component: 2150  -  total flux cleaned = 0.000189637 Jy
! Component: 2200  -  total flux cleaned = 0.00016217 Jy
! Component: 2250  -  total flux cleaned = 0.000135157 Jy
! Component: 2300  -  total flux cleaned = 0.000108514 Jy
! Component: 2350  -  total flux cleaned = 0.000108522 Jy
! Component: 2400  -  total flux cleaned = 6.91102e-05 Jy
! Component: 2450  -  total flux cleaned = 3.04279e-05 Jy
! Component: 2500  -  total flux cleaned = -2.05666e-05 Jy
! Component: 2550  -  total flux cleaned = -5.83714e-05 Jy
! Component: 2600  -  total flux cleaned = -0.000108359 Jy
! Component: 2650  -  total flux cleaned = -0.000145318 Jy
! Component: 2700  -  total flux cleaned = -0.000145505 Jy
! Component: 2750  -  total flux cleaned = -0.00018191 Jy
! Component: 2800  -  total flux cleaned = -0.000229875 Jy
! Component: 2850  -  total flux cleaned = -0.000241784 Jy
! Component: 2900  -  total flux cleaned = -0.000265361 Jy
! Component: 2950  -  total flux cleaned = -0.000288741 Jy
! Component: 3000  -  total flux cleaned = -0.000311908 Jy
! Component: 3050  -  total flux cleaned = -0.000334797 Jy
! Component: 3100  -  total flux cleaned = -0.00036888 Jy
! Component: 3150  -  total flux cleaned = -0.00034623 Jy
! Component: 3200  -  total flux cleaned = -0.000379899 Jy
! Component: 3250  -  total flux cleaned = -0.000379881 Jy
! Component: 3300  -  total flux cleaned = -0.000379887 Jy
! Component: 3350  -  total flux cleaned = -0.000423906 Jy
! Component: 3400  -  total flux cleaned = -0.000412969 Jy
! Component: 3450  -  total flux cleaned = -0.000434576 Jy
! Component: 3500  -  total flux cleaned = -0.00044526 Jy
! Component: 3550  -  total flux cleaned = -0.000456026 Jy
! Component: 3600  -  total flux cleaned = -0.000455975 Jy
! Component: 3650  -  total flux cleaned = -0.00046646 Jy
! Component: 3700  -  total flux cleaned = -0.000508469 Jy
! Component: 3750  -  total flux cleaned = -0.000529304 Jy
! Component: 3800  -  total flux cleaned = -0.0005293 Jy
! Component: 3850  -  total flux cleaned = -0.000560317 Jy
! Component: 3900  -  total flux cleaned = -0.000611656 Jy
! Component: 3950  -  total flux cleaned = -0.000631983 Jy
! Component: 4000  -  total flux cleaned = -0.000652236 Jy
! Component: 4050  -  total flux cleaned = -0.000682596 Jy
! Total flux subtracted in 4096 components = -0.000702677 Jy
! Clean residual min=-0.000628 max=0.000618 Jy/beam
! Clean residual mean=-0.000001 rms=0.000184 Jy/beam
! Combined flux in latest and established models = 0.145973 Jy
keep
! Adding 258 model components to the UV plane model.
! The established model now contains 427 components and 0.145973 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2322-0737_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.145 x 14.82 at -17.26 degrees (North through East)
! Clean map  min=-0.0018599  max=0.13614 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2322-0737_S_map.fits
wmodel /vlbi/uf001/uva//J2322-0737_S_map.mod
! Writing 427 model components to file: /vlbi/uf001/uva//J2322-0737_S_map.mod
wobs   /vlbi/uf001/uva//J2322-0737_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2322-0737_S_uvs.fits
wwins  /vlbi/uf001/uva//J2322-0737_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2322-0737_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.136135 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00017937 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.395277 0.395277 0.790553 1.58111 3.16221 6.32443 12.6489 25.2977 50.5954
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.136 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  758.962 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2322-0737_S_dfm.log closed on Mon Jan 14 06:40:37 2019