! Started logfile: /vlbi/uf001/uva//J2320+0513_S_b_dfm.log on Mon Jan 14 06:39:33 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2320+0513_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2320+0513_S_b_uva.fits
! AN table 1: 10 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.635714 visibilities/baseline/integration-bin.
! Found source: J2320+0513
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 534 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2320+0513_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 31 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.672369Jy  sigma=19.240255
! Fit after  self-cal, rms=0.677221Jy  sigma=4.969327
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.554 mas, bmaj=11.52 mas, bpa=-15.73 degrees
! Estimated noise=3.27813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.832946 Jy
! Component: 100  -  total flux cleaned = 1.04467 Jy
! Total flux subtracted in 100 components = 1.04467 Jy
! Clean residual min=-0.075995 max=0.085577 Jy/beam
! Clean residual mean=-0.000038 rms=0.022851 Jy/beam
! Combined flux in latest and established models = 1.04467 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.04467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.663476Jy  sigma=4.730530
! Fit after  self-cal, rms=0.663468Jy  sigma=4.730216
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.179 mas, bmaj=11.89 mas, bpa=-15.23 degrees
! Estimated noise=2.83857 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0977865 Jy
! Component: 100  -  total flux cleaned = 0.100379 Jy
! Component: 150  -  total flux cleaned = 0.102224 Jy
! Component: 200  -  total flux cleaned = 0.108583 Jy
! Total flux subtracted in 200 components = 0.108583 Jy
! Clean residual min=-0.086393 max=0.061840 Jy/beam
! Clean residual mean=0.000014 rms=0.018808 Jy/beam
! Combined flux in latest and established models = 1.15325 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 34 components and 1.15325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.622034Jy  sigma=4.416026
! Fit after  self-cal, rms=0.622012Jy  sigma=4.415655
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.179 x 11.89 at -15.23 degrees (North through East)
! Clean map  min=-0.084474  max=1.0755 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.92     HN        1.09     KP        1.09     
!   LA        0.99     MK        1.05     NL        1.23     PT        1.06     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        0.95     HN        1.12     KP        1.07     
!   LA        1.15     MK        0.93     NL        0.52     PT        0.93     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.94     HN        1.08     KP        1.08     
!   LA        0.99     MK        1.03     NL        1.04     PT        1.06     
! 
! 
! Fit before self-cal, rms=0.622012Jy  sigma=4.415655
! Fit after  self-cal, rms=0.245785Jy  sigma=2.915450
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.199 mas, bmaj=12.01 mas, bpa=-15.44 degrees
! Estimated noise=2.90552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180399 Jy
! Component: 100  -  total flux cleaned = 0.0167656 Jy
! Component: 150  -  total flux cleaned = 0.0167743 Jy
! Component: 200  -  total flux cleaned = 0.0167608 Jy
! Total flux subtracted in 200 components = 0.0167608 Jy
! Clean residual min=-0.058851 max=0.044458 Jy/beam
! Clean residual mean=0.000080 rms=0.014501 Jy/beam
! Combined flux in latest and established models = 1.17001 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 53 components and 1.17001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.240160Jy  sigma=2.898828
! Fit after  self-cal, rms=0.240151Jy  sigma=2.898084
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.240151Jy  sigma=2.898084
! Fit after  self-cal, rms=0.114435Jy  sigma=1.263321
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.187 mas, bmaj=11.97 mas, bpa=-15.45 degrees
! Estimated noise=2.90184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0185151 Jy
! Component: 100  -  total flux cleaned = 0.0225761 Jy
! Component: 150  -  total flux cleaned = 0.025328 Jy
! Component: 200  -  total flux cleaned = 0.0272225 Jy
! Total flux subtracted in 200 components = 0.0272225 Jy
! Clean residual min=-0.022002 max=0.019307 Jy/beam
! Clean residual mean=0.000022 rms=0.005213 Jy/beam
! Combined flux in latest and established models = 1.19723 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 1.19723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109773Jy  sigma=1.216152
! Fit after  self-cal, rms=0.109691Jy  sigma=1.215253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00162087 Jy
! Component: 100  -  total flux cleaned = 0.00272829 Jy
! Component: 150  -  total flux cleaned = 0.00370552 Jy
! Component: 200  -  total flux cleaned = 0.00456919 Jy
! Total flux subtracted in 200 components = 0.00456919 Jy
! Clean residual min=-0.020995 max=0.019403 Jy/beam
! Clean residual mean=0.000023 rms=0.005128 Jy/beam
! Combined flux in latest and established models = 1.2018 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 1.2018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108696Jy  sigma=1.208670
! Fit after  self-cal, rms=0.108704Jy  sigma=1.208637
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108704Jy  sigma=1.208637
! Fit after  self-cal, rms=0.106657Jy  sigma=1.186118
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.177 mas, bmaj=12.04 mas, bpa=-15.59 degrees
! Estimated noise=2.90999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00331926 Jy
! Component: 100  -  total flux cleaned = 0.00545156 Jy
! Component: 150  -  total flux cleaned = 0.00693912 Jy
! Component: 200  -  total flux cleaned = 0.00777034 Jy
! Total flux subtracted in 200 components = 0.00777034 Jy
! Clean residual min=-0.020741 max=0.016822 Jy/beam
! Clean residual mean=0.000030 rms=0.004606 Jy/beam
! Combined flux in latest and established models = 1.20957 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 81 components and 1.20957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104984Jy  sigma=1.169322
! Fit after  self-cal, rms=0.104992Jy  sigma=1.169251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000770912 Jy
! Component: 100  -  total flux cleaned = 0.00141337 Jy
! Component: 150  -  total flux cleaned = 0.00211789 Jy
! Component: 200  -  total flux cleaned = 0.00249495 Jy
! Total flux subtracted in 200 components = 0.00249495 Jy
! Clean residual min=-0.019762 max=0.016821 Jy/beam
! Clean residual mean=0.000031 rms=0.004552 Jy/beam
! Combined flux in latest and established models = 1.21207 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 1.21207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104486Jy  sigma=1.165741
! Fit after  self-cal, rms=0.104500Jy  sigma=1.165693
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.104500Jy  sigma=1.165693
! Fit after  self-cal, rms=0.104171Jy  sigma=1.157064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.665 mas, bmaj=12.43 mas, bpa=-14.68 degrees
! Estimated noise=3.34515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186246 Jy
! Component: 100  -  total flux cleaned = 0.0024146 Jy
! Component: 150  -  total flux cleaned = 0.0030538 Jy
! Component: 200  -  total flux cleaned = 0.00347848 Jy
! Total flux subtracted in 200 components = 0.00347848 Jy
! Clean residual min=-0.016837 max=0.014394 Jy/beam
! Clean residual mean=0.000057 rms=0.004416 Jy/beam
! Combined flux in latest and established models = 1.21555 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 1.21555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103590Jy  sigma=1.152755
! Fit after  self-cal, rms=0.103590Jy  sigma=1.152735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000500316 Jy
! Component: 100  -  total flux cleaned = 0.000720286 Jy
! Component: 150  -  total flux cleaned = 0.00111584 Jy
! Component: 200  -  total flux cleaned = 0.00137236 Jy
! Total flux subtracted in 200 components = 0.00137236 Jy
! Clean residual min=-0.016315 max=0.013897 Jy/beam
! Clean residual mean=0.000057 rms=0.004374 Jy/beam
! Combined flux in latest and established models = 1.21692 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 101 components and 1.21692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103355Jy  sigma=1.152439
! Fit after  self-cal, rms=0.103359Jy  sigma=1.152406
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.172 mas, bmaj=12.1 mas, bpa=-15.67 degrees
! Estimated noise=2.91623 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.172 x 12.1 at -15.67 degrees (North through East)
! Clean map  min=-0.022159  max=1.0863 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103359Jy  sigma=1.152406
! Fit after  self-cal, rms=0.086881Jy  sigma=0.948903
! Inverting map and beam 
! Estimated beam: bmin=4.172 mas, bmaj=12.14 mas, bpa=-15.7 degrees
! Estimated noise=2.9206 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00418418 Jy
! Component: 100  -  total flux cleaned = -0.00457579 Jy
! Component: 150  -  total flux cleaned = -0.00457339 Jy
! Component: 200  -  total flux cleaned = -0.00444978 Jy
! Total flux subtracted in 200 components = -0.00444978 Jy
! Clean residual min=-0.018846 max=0.014923 Jy/beam
! Clean residual mean=0.000031 rms=0.004132 Jy/beam
! Combined flux in latest and established models = 1.21247 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 114 components and 1.21247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086139Jy  sigma=0.938444
! Fit after  self-cal, rms=0.086154Jy  sigma=0.938363
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267136 Jy
! Component: 100  -  total flux cleaned = 0.000264004 Jy
! Component: 150  -  total flux cleaned = 0.000449042 Jy
! Component: 200  -  total flux cleaned = 0.000620057 Jy
! Total flux subtracted in 200 components = 0.000620057 Jy
! Clean residual min=-0.018511 max=0.014655 Jy/beam
! Clean residual mean=0.000031 rms=0.004102 Jy/beam
! Combined flux in latest and established models = 1.21309 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 1.21309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085930Jy  sigma=0.936058
! Fit after  self-cal, rms=0.085947Jy  sigma=0.935985
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085947Jy  sigma=0.935985
! Fit after  self-cal, rms=0.085918Jy  sigma=0.931196
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.56 mas, bmaj=11.75 mas, bpa=-16.22 degrees
! Estimated noise=3.40706 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.861082 Jy
! Component: 100  -  total flux cleaned = 1.06493 Jy
! Component: 150  -  total flux cleaned = 1.14074 Jy
! Component: 200  -  total flux cleaned = 1.17637 Jy
! Total flux subtracted in 200 components = 1.17637 Jy
! Clean residual min=-0.024480 max=0.025958 Jy/beam
! Clean residual mean=-0.000000 rms=0.006256 Jy/beam
! Combined flux in latest and established models = 1.17637 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 1.17637 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.169 mas, bmaj=12.2 mas, bpa=-15.77 degrees
! Estimated noise=2.92579 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268227 Jy
! Component: 100  -  total flux cleaned = 0.0355943 Jy
! Component: 150  -  total flux cleaned = 0.0380491 Jy
! Component: 200  -  total flux cleaned = 0.0399732 Jy
! Total flux subtracted in 200 components = 0.0399732 Jy
! Clean residual min=-0.019411 max=0.013873 Jy/beam
! Clean residual mean=0.000033 rms=0.004260 Jy/beam
! Combined flux in latest and established models = 1.21635 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 69 components and 1.21635 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.662 mas, bmaj=12.52 mas, bpa=-15.04 degrees
! Estimated noise=3.35176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00648249 Jy
! Component: 100  -  total flux cleaned = 0.00601205 Jy
! Component: 150  -  total flux cleaned = 0.00600063 Jy
! Component: 200  -  total flux cleaned = 0.00599809 Jy
! Total flux subtracted in 200 components = 0.00599809 Jy
! Clean residual min=-0.014803 max=0.012554 Jy/beam
! Clean residual mean=0.000053 rms=0.004137 Jy/beam
! Combined flux in latest and established models = 1.22234 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.06164e-05 Jy
! Component: 100  -  total flux cleaned = 9.42888e-05 Jy
! Component: 150  -  total flux cleaned = 0.00016486 Jy
! Component: 200  -  total flux cleaned = 0.000103175 Jy
! Total flux subtracted in 200 components = 0.000103175 Jy
! Clean residual min=-0.014531 max=0.012789 Jy/beam
! Clean residual mean=0.000053 rms=0.004096 Jy/beam
! Combined flux in latest and established models = 1.22245 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 97 components and 1.22245 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.169 mas, bmaj=12.2 mas, bpa=-15.77 degrees
! Estimated noise=2.92579 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143379 Jy
! Component: 100  -  total flux cleaned = 0.0010987 Jy
! Component: 150  -  total flux cleaned = 0.00022725 Jy
! Component: 200  -  total flux cleaned = -0.000156569 Jy
! Total flux subtracted in 200 components = -0.000156569 Jy
! Clean residual min=-0.018026 max=0.013661 Jy/beam
! Clean residual mean=0.000032 rms=0.003945 Jy/beam
! Combined flux in latest and established models = 1.22229 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 114 components and 1.22229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085189Jy  sigma=0.923205
! Fit after  self-cal, rms=0.085179Jy  sigma=0.922428
wmodel J2320+0513_S_b_map.mod
! Writing 114 model components to file: J2320+0513_S_b_map.mod
wobs   J2320+0513_S_b_uvs.fits
! Writing UV FITS file: J2320+0513_S_b_uvs.fits
wwins  J2320+0513_S_b_map.win
! wwins: Wrote 1 windows to J2320+0513_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00693188 Jy
! Component: 100  -  total flux cleaned = -0.0101416 Jy
! Component: 150  -  total flux cleaned = -0.0118998 Jy
! Component: 200  -  total flux cleaned = -0.0129203 Jy
! Component: 250  -  total flux cleaned = -0.0140433 Jy
! Component: 300  -  total flux cleaned = -0.0154528 Jy
! Component: 350  -  total flux cleaned = -0.0166174 Jy
! Component: 400  -  total flux cleaned = -0.0175737 Jy
! Component: 450  -  total flux cleaned = -0.0175756 Jy
! Component: 500  -  total flux cleaned = -0.0177244 Jy
! Component: 550  -  total flux cleaned = -0.0175856 Jy
! Component: 600  -  total flux cleaned = -0.0174513 Jy
! Component: 650  -  total flux cleaned = -0.0169318 Jy
! Component: 700  -  total flux cleaned = -0.0165634 Jy
! Component: 750  -  total flux cleaned = -0.0165625 Jy
! Component: 800  -  total flux cleaned = -0.0162099 Jy
! Component: 850  -  total flux cleaned = -0.0157562 Jy
! Component: 900  -  total flux cleaned = -0.0157585 Jy
! Component: 950  -  total flux cleaned = -0.0159674 Jy
! Component: 1000  -  total flux cleaned = -0.0159648 Jy
! Component: 1050  -  total flux cleaned = -0.0158678 Jy
! Component: 1100  -  total flux cleaned = -0.0160636 Jy
! Component: 1150  -  total flux cleaned = -0.0164413 Jy
! Component: 1200  -  total flux cleaned = -0.0164404 Jy
! Component: 1250  -  total flux cleaned = -0.0165316 Jy
! Component: 1300  -  total flux cleaned = -0.0170617 Jy
! Component: 1350  -  total flux cleaned = -0.0171491 Jy
! Component: 1400  -  total flux cleaned = -0.017318 Jy
! Component: 1450  -  total flux cleaned = -0.0176509 Jy
! Component: 1500  -  total flux cleaned = -0.0179724 Jy
! Component: 1550  -  total flux cleaned = -0.0181272 Jy
! Component: 1600  -  total flux cleaned = -0.0183576 Jy
! Component: 1650  -  total flux cleaned = -0.0185848 Jy
! Component: 1700  -  total flux cleaned = -0.0189555 Jy
! Component: 1750  -  total flux cleaned = -0.0192459 Jy
! Component: 1800  -  total flux cleaned = -0.0194602 Jy
! Component: 1850  -  total flux cleaned = -0.0196709 Jy
! Component: 1900  -  total flux cleaned = -0.0199474 Jy
! Component: 1950  -  total flux cleaned = -0.0201522 Jy
! Component: 2000  -  total flux cleaned = -0.0205502 Jy
! Component: 2050  -  total flux cleaned = -0.020811 Jy
! Component: 2100  -  total flux cleaned = -0.021004 Jy
! Component: 2150  -  total flux cleaned = -0.0209403 Jy
! Component: 2200  -  total flux cleaned = -0.0208782 Jy
! Component: 2250  -  total flux cleaned = -0.020879 Jy
! Component: 2300  -  total flux cleaned = -0.0208185 Jy
! Component: 2350  -  total flux cleaned = -0.0206395 Jy
! Component: 2400  -  total flux cleaned = -0.0205811 Jy
! Component: 2450  -  total flux cleaned = -0.0202313 Jy
! Component: 2500  -  total flux cleaned = -0.0201744 Jy
! Component: 2550  -  total flux cleaned = -0.0201166 Jy
! Component: 2600  -  total flux cleaned = -0.0200035 Jy
! Component: 2650  -  total flux cleaned = -0.019837 Jy
! Component: 2700  -  total flux cleaned = -0.0197825 Jy
! Component: 2750  -  total flux cleaned = -0.0196738 Jy
! Component: 2800  -  total flux cleaned = -0.0196191 Jy
! Component: 2850  -  total flux cleaned = -0.0193534 Jy
! Component: 2900  -  total flux cleaned = -0.019301 Jy
! Component: 2950  -  total flux cleaned = -0.0193008 Jy
! Component: 3000  -  total flux cleaned = -0.0193517 Jy
! Component: 3050  -  total flux cleaned = -0.0193517 Jy
! Component: 3100  -  total flux cleaned = -0.0193008 Jy
! Component: 3150  -  total flux cleaned = -0.019301 Jy
! Component: 3200  -  total flux cleaned = -0.0193506 Jy
! Component: 3250  -  total flux cleaned = -0.0193509 Jy
! Component: 3300  -  total flux cleaned = -0.0194 Jy
! Component: 3350  -  total flux cleaned = -0.0193021 Jy
! Component: 3400  -  total flux cleaned = -0.0193995 Jy
! Component: 3450  -  total flux cleaned = -0.0193993 Jy
! Component: 3500  -  total flux cleaned = -0.0192548 Jy
! Component: 3550  -  total flux cleaned = -0.019351 Jy
! Component: 3600  -  total flux cleaned = -0.0192556 Jy
! Component: 3650  -  total flux cleaned = -0.0192556 Jy
! Component: 3700  -  total flux cleaned = -0.0192556 Jy
! Component: 3750  -  total flux cleaned = -0.0192085 Jy
! Component: 3800  -  total flux cleaned = -0.0192084 Jy
! Component: 3850  -  total flux cleaned = -0.0191146 Jy
! Component: 3900  -  total flux cleaned = -0.0190679 Jy
! Component: 3950  -  total flux cleaned = -0.0190679 Jy
! Component: 4000  -  total flux cleaned = -0.0190216 Jy
! Component: 4050  -  total flux cleaned = -0.0189753 Jy
! Total flux subtracted in 4096 components = -0.0189752 Jy
! Clean residual min=-0.002885 max=0.002738 Jy/beam
! Clean residual mean=0.000006 rms=0.000830 Jy/beam
! Combined flux in latest and established models = 1.20332 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 392 components and 1.20332 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2320+0513_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.169 x 12.2 at -15.77 degrees (North through East)
! Clean map  min=-0.012124  max=1.0983 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2320+0513_S_b_map.fits
wmodel /vlbi/uf001/uva//J2320+0513_S_b_map.mod
! Writing 392 model components to file: /vlbi/uf001/uva//J2320+0513_S_b_map.mod
wobs   /vlbi/uf001/uva//J2320+0513_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2320+0513_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J2320+0513_S_b_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2320+0513_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.09827 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000839114 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.229209 0.229209 0.458418 0.916836 1.83367 3.66734 7.33469 14.6694 29.3388 58.6775
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.098 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1308.85 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2320+0513_S_b_dfm.log closed on Mon Jan 14 06:39:37 2019