! Started logfile: /vlbi/uf001/uvm//J2320+0513_S_a_dfm.log on Sun Jan 13 22:43:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uvm//J2320+0513_S_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2320+0513_S_a_uvm.fits ! AN table 1: 4 integrations on 10 of 10 possible baselines. ! AN table 2: 33 integrations on 45 of 45 possible baselines. ! AN table 3: 4 integrations on 36 of 36 possible baselines. ! AN table 4: 5 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.787994 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4371 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2320+0513_S_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 86 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 13 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.330767Jy sigma=19.492066 ! Fit after self-cal, rms=0.189557Jy sigma=2.763926 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=6.645 mas, bpa=-3.067 degrees ! Estimated noise=1.10425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.658696 Jy ! Component: 100 - total flux cleaned = 0.802377 Jy ! Total flux subtracted in 100 components = 0.802377 Jy ! Clean residual min=-0.015411 max=0.040822 Jy/beam ! Clean residual mean=0.000019 rms=0.004076 Jy/beam ! Combined flux in latest and established models = 0.802377 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.802377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.141376Jy sigma=2.013037 ! Fit after self-cal, rms=0.141372Jy sigma=2.012973 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0396893 Jy ! Component: 100 - total flux cleaned = 0.0579649 Jy ! Total flux subtracted in 100 components = 0.0579649 Jy ! Clean residual min=-0.013532 max=0.017016 Jy/beam ! Clean residual mean=0.000020 rms=0.003443 Jy/beam ! Combined flux in latest and established models = 0.860342 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.860342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.125111Jy sigma=1.784211 ! Fit after self-cal, rms=0.125094Jy sigma=1.783884 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=7.655 mas, bpa=-0.07086 degrees ! Estimated noise=0.816686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227598 Jy ! Component: 100 - total flux cleaned = 0.0375571 Jy ! Component: 150 - total flux cleaned = 0.0483006 Jy ! Component: 200 - total flux cleaned = 0.0562494 Jy ! Total flux subtracted in 200 components = 0.0562494 Jy ! Clean residual min=-0.011471 max=0.015558 Jy/beam ! Clean residual mean=0.000170 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 0.916591 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 44 components and 0.916591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.119625Jy sigma=1.713171 ! Fit after self-cal, rms=0.119403Jy sigma=1.709902 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.397 x 7.655 at -0.07086 degrees (North through East) ! Clean map min=-0.010733 max=0.8519 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 LA 1.21 NL 1.12 OV 1.11 ! PT 1.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 0.98 KP 1.00 ! LA 0.96 MK 1.01 NL 1.03 OV 0.99 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 1.03 HN 1.01 KP 1.01 ! LA 1.18 MK 0.94 OV 0.99 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.90 HN 1.00 KP 1.01 ! LA 0.99 NL 0.95 OV 0.98 PT 0.95 ! SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 LA 1.08 NL 1.13 OV 1.16 ! PT 1.74 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 1.00 KP 1.00 ! LA 0.95 MK 1.02 NL 1.03 OV 0.97 ! PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.03 HN 1.01 KP 0.99 ! LA 1.22 MK 0.98 OV 1.03 PT 0.98 ! SC 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 HN 0.97 KP 0.99 ! LA 0.97 NL 1.08 OV 0.98 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 LA 1.11 NL 1.16 OV 1.05 ! PT 1.58 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.00 KP 1.01 ! LA 0.93 MK 1.05 NL 1.02 OV 0.98 ! PT 0.97 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 1.04 HN 1.02 KP 1.00 ! LA 1.22 MK 0.95 OV 1.01 PT 0.98 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.90 HN 0.99 KP 1.00 ! LA 0.97 NL 1.06 OV 1.00 PT 0.96 ! SC 1.06 ! ! ! Fit before self-cal, rms=0.119403Jy sigma=1.709902 ! Fit after self-cal, rms=0.102087Jy sigma=1.475258 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=7.674 mas, bpa=0.04301 degrees ! Estimated noise=0.814245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-78, 99.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819497 Jy ! Component: 100 - total flux cleaned = 0.00817255 Jy ! Component: 150 - total flux cleaned = 0.007967 Jy ! Component: 200 - total flux cleaned = 0.00814527 Jy ! Total flux subtracted in 200 components = 0.00814527 Jy ! Clean residual min=-0.008792 max=0.009534 Jy/beam ! Clean residual mean=0.000013 rms=0.002227 Jy/beam ! Combined flux in latest and established models = 0.924737 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.924737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100871Jy sigma=1.455490 ! Fit after self-cal, rms=0.100821Jy sigma=1.454139 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100821Jy sigma=1.454139 ! Fit after self-cal, rms=0.069126Jy sigma=0.907272 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=7.685 mas, bpa=0.1566 degrees ! Estimated noise=0.815047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166216 Jy ! Component: 100 - total flux cleaned = -0.00269258 Jy ! Component: 150 - total flux cleaned = -0.00294781 Jy ! Component: 200 - total flux cleaned = -0.0033921 Jy ! Total flux subtracted in 200 components = -0.0033921 Jy ! Clean residual min=-0.003586 max=0.003500 Jy/beam ! Clean residual mean=0.000020 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.921344 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.921344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068528Jy sigma=0.898468 ! Fit after self-cal, rms=0.068529Jy sigma=0.897994 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000335483 Jy ! Component: 100 - total flux cleaned = -0.000429123 Jy ! Component: 150 - total flux cleaned = -0.000347816 Jy ! Component: 200 - total flux cleaned = -0.000274088 Jy ! Total flux subtracted in 200 components = -0.000274088 Jy ! Clean residual min=-0.003354 max=0.003484 Jy/beam ! Clean residual mean=0.000021 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.92107 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.92107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068312Jy sigma=0.894936 ! Fit after self-cal, rms=0.068304Jy sigma=0.894861 ! Inverting map ! Added new window around map position (-76, -67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277122 Jy ! Component: 100 - total flux cleaned = 0.00379164 Jy ! Component: 150 - total flux cleaned = 0.00430781 Jy ! Component: 200 - total flux cleaned = 0.00464142 Jy ! Total flux subtracted in 200 components = 0.00464142 Jy ! Clean residual min=-0.003532 max=0.003234 Jy/beam ! Clean residual mean=0.000017 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.925712 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.925712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068060Jy sigma=0.891720 ! Fit after self-cal, rms=0.068048Jy sigma=0.891570 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068048Jy sigma=0.891570 ! Fit after self-cal, rms=0.068049Jy sigma=0.889961 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.685 mas, bpa=0.1995 degrees ! Estimated noise=0.814912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000405746 Jy ! Component: 100 - total flux cleaned = -0.000486752 Jy ! Component: 150 - total flux cleaned = -0.000625305 Jy ! Component: 200 - total flux cleaned = -0.00056499 Jy ! Total flux subtracted in 200 components = -0.00056499 Jy ! Clean residual min=-0.003374 max=0.003151 Jy/beam ! Clean residual mean=0.000012 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.925147 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 117 components and 0.925147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067888Jy sigma=0.887734 ! Fit after self-cal, rms=0.067881Jy sigma=0.887668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.13797e-05 Jy ! Component: 100 - total flux cleaned = 5.18399e-05 Jy ! Component: 150 - total flux cleaned = 0.000103982 Jy ! Component: 200 - total flux cleaned = 0.00025477 Jy ! Total flux subtracted in 200 components = 0.00025477 Jy ! Clean residual min=-0.003288 max=0.003066 Jy/beam ! Clean residual mean=0.000012 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.925401 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 126 components and 0.925402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067797Jy sigma=0.886535 ! Fit after self-cal, rms=0.067794Jy sigma=0.886514 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067794Jy sigma=0.886514 ! Fit after self-cal, rms=0.067833Jy sigma=0.886200 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=11.54 mas, bpa=1.192 degrees ! Estimated noise=1.03566 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000614051 Jy ! Component: 100 - total flux cleaned = 0.000837187 Jy ! Component: 150 - total flux cleaned = 0.000985568 Jy ! Component: 200 - total flux cleaned = 0.00107474 Jy ! Total flux subtracted in 200 components = 0.00107474 Jy ! Clean residual min=-0.003874 max=0.003429 Jy/beam ! Clean residual mean=0.000020 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.926476 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 158 components and 0.926476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067792Jy sigma=0.885648 ! Fit after self-cal, rms=0.067788Jy sigma=0.885609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164952 Jy ! Component: 100 - total flux cleaned = 0.00031368 Jy ! Component: 150 - total flux cleaned = 0.000382315 Jy ! Component: 200 - total flux cleaned = 0.00050778 Jy ! Total flux subtracted in 200 components = 0.00050778 Jy ! Clean residual min=-0.003775 max=0.003446 Jy/beam ! Clean residual mean=0.000019 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.926984 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 168 components and 0.926984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067772Jy sigma=0.885424 ! Fit after self-cal, rms=0.067770Jy sigma=0.885413 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.686 mas, bpa=0.23 degrees ! Estimated noise=0.814918 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.404 x 7.686 at 0.23 degrees (North through East) ! Clean map min=-0.003242 max=0.85049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067770Jy sigma=0.885413 ! Fit after self-cal, rms=0.063323Jy sigma=0.817179 ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.687 mas, bpa=0.2328 degrees ! Estimated noise=0.815005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047186 Jy ! Component: 100 - total flux cleaned = -0.000475004 Jy ! Component: 150 - total flux cleaned = -0.000430594 Jy ! Component: 200 - total flux cleaned = -0.000515857 Jy ! Total flux subtracted in 200 components = -0.000515857 Jy ! Clean residual min=-0.002822 max=0.002943 Jy/beam ! Clean residual mean=0.000009 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.926468 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 186 components and 0.926468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063246Jy sigma=0.816227 ! Fit after self-cal, rms=0.063242Jy sigma=0.816194 ! Inverting map ! Added new window around map position (80, 80). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015948 Jy ! Component: 100 - total flux cleaned = 0.00217928 Jy ! Component: 150 - total flux cleaned = 0.00244098 Jy ! Component: 200 - total flux cleaned = 0.00276667 Jy ! Total flux subtracted in 200 components = 0.00276667 Jy ! Clean residual min=-0.002742 max=0.002987 Jy/beam ! Clean residual mean=0.000006 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.929235 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 202 components and 0.929235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063087Jy sigma=0.813995 ! Fit after self-cal, rms=0.063081Jy sigma=0.813906 ! Inverting map ! Added new window around map position (-11.5, 33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107073 Jy ! Component: 100 - total flux cleaned = 0.00168019 Jy ! Component: 150 - total flux cleaned = 0.00187468 Jy ! Component: 200 - total flux cleaned = 0.00187558 Jy ! Total flux subtracted in 200 components = 0.00187558 Jy ! Clean residual min=-0.002452 max=0.002639 Jy/beam ! Clean residual mean=0.000008 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.93111 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 216 components and 0.93111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062933Jy sigma=0.811760 ! Fit after self-cal, rms=0.062935Jy sigma=0.811684 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.062935Jy sigma=0.811684 ! Fit after self-cal, rms=0.062914Jy sigma=0.811398 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=6.662 mas, bpa=-2.898 degrees ! Estimated noise=1.10586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.659715 Jy ! Component: 100 - total flux cleaned = 0.803619 Jy ! Component: 150 - total flux cleaned = 0.841722 Jy ! Component: 200 - total flux cleaned = 0.861317 Jy ! Total flux subtracted in 200 components = 0.861317 Jy ! Clean residual min=-0.005763 max=0.010035 Jy/beam ! Clean residual mean=-0.000001 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.861318 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.861318 Jy ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.686 mas, bpa=0.2544 degrees ! Estimated noise=0.814827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195245 Jy ! Component: 100 - total flux cleaned = 0.0309144 Jy ! Component: 150 - total flux cleaned = 0.0382573 Jy ! Component: 200 - total flux cleaned = 0.043031 Jy ! Total flux subtracted in 200 components = 0.043031 Jy ! Clean residual min=-0.003640 max=0.003647 Jy/beam ! Clean residual mean=0.000013 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.904349 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 72 components and 0.904349 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.468 mas, bmaj=11.54 mas, bpa=1.201 degrees ! Estimated noise=1.03575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00631245 Jy ! Component: 100 - total flux cleaned = 0.0103806 Jy ! Component: 150 - total flux cleaned = 0.0127046 Jy ! Component: 200 - total flux cleaned = 0.0145964 Jy ! Total flux subtracted in 200 components = 0.0145964 Jy ! Clean residual min=-0.003507 max=0.003463 Jy/beam ! Clean residual mean=0.000028 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.918945 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165108 Jy ! Component: 100 - total flux cleaned = 0.00311279 Jy ! Component: 150 - total flux cleaned = 0.00441686 Jy ! Component: 200 - total flux cleaned = 0.00537913 Jy ! Total flux subtracted in 200 components = 0.00537913 Jy ! Clean residual min=-0.003167 max=0.003054 Jy/beam ! Clean residual mean=0.000024 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.924324 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 151 components and 0.924324 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=7.686 mas, bpa=0.2544 degrees ! Estimated noise=0.814827 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104578 Jy ! Component: 100 - total flux cleaned = 0.000481555 Jy ! Component: 150 - total flux cleaned = 0.0012454 Jy ! Component: 200 - total flux cleaned = 0.00163863 Jy ! Total flux subtracted in 200 components = 0.00163863 Jy ! Clean residual min=-0.002930 max=0.003092 Jy/beam ! Clean residual mean=0.000011 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.925963 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 179 components and 0.925963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063147Jy sigma=0.815374 ! Fit after self-cal, rms=0.063119Jy sigma=0.814661 wmodel J2320+0513_S_a_map.mod ! Writing 179 model components to file: J2320+0513_S_a_map.mod wobs J2320+0513_S_a_uvs.fits ! Writing UV FITS file: J2320+0513_S_a_uvs.fits wwins J2320+0513_S_a_map.win ! wwins: Wrote 6 windows to J2320+0513_S_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.45828e-05 Jy ! Component: 100 - total flux cleaned = 0.000108731 Jy ! Component: 150 - total flux cleaned = 0.000152379 Jy ! Component: 200 - total flux cleaned = 0.000280024 Jy ! Component: 250 - total flux cleaned = 0.000199118 Jy ! Component: 300 - total flux cleaned = -7.79004e-05 Jy ! Component: 350 - total flux cleaned = -0.000232439 Jy ! Component: 400 - total flux cleaned = -0.000497954 Jy ! Component: 450 - total flux cleaned = -0.000794359 Jy ! Component: 500 - total flux cleaned = -0.00104827 Jy ! Component: 550 - total flux cleaned = -0.0012268 Jy ! Component: 600 - total flux cleaned = -0.00140276 Jy ! Component: 650 - total flux cleaned = -0.00150731 Jy ! Component: 700 - total flux cleaned = -0.00161021 Jy ! Component: 750 - total flux cleaned = -0.00167786 Jy ! Component: 800 - total flux cleaned = -0.00171131 Jy ! Component: 850 - total flux cleaned = -0.0018435 Jy ! Component: 900 - total flux cleaned = -0.00197378 Jy ! Component: 950 - total flux cleaned = -0.00194092 Jy ! Component: 1000 - total flux cleaned = -0.0021327 Jy ! Component: 1050 - total flux cleaned = -0.00222741 Jy ! Component: 1100 - total flux cleaned = -0.00229001 Jy ! Component: 1150 - total flux cleaned = -0.00225871 Jy ! Component: 1200 - total flux cleaned = -0.00241262 Jy ! Component: 1250 - total flux cleaned = -0.00238166 Jy ! Component: 1300 - total flux cleaned = -0.00244205 Jy ! Component: 1350 - total flux cleaned = -0.00247215 Jy ! Component: 1400 - total flux cleaned = -0.00253211 Jy ! Component: 1450 - total flux cleaned = -0.00256129 Jy ! Component: 1500 - total flux cleaned = -0.00256146 Jy ! Component: 1550 - total flux cleaned = -0.00253252 Jy ! Component: 1600 - total flux cleaned = -0.00261949 Jy ! Component: 1650 - total flux cleaned = -0.00259109 Jy ! Component: 1700 - total flux cleaned = -0.0026479 Jy ! Component: 1750 - total flux cleaned = -0.00267618 Jy ! Component: 1800 - total flux cleaned = -0.00267622 Jy ! Component: 1850 - total flux cleaned = -0.00267628 Jy ! Component: 1900 - total flux cleaned = -0.0027313 Jy ! Component: 1950 - total flux cleaned = -0.00267596 Jy ! Component: 2000 - total flux cleaned = -0.00262152 Jy ! Component: 2050 - total flux cleaned = -0.00272994 Jy ! Component: 2100 - total flux cleaned = -0.00262217 Jy ! Component: 2150 - total flux cleaned = -0.00267592 Jy ! Component: 2200 - total flux cleaned = -0.00275591 Jy ! Component: 2250 - total flux cleaned = -0.00272943 Jy ! Component: 2300 - total flux cleaned = -0.00280848 Jy ! Component: 2350 - total flux cleaned = -0.00278202 Jy ! Component: 2400 - total flux cleaned = -0.00283393 Jy ! Component: 2450 - total flux cleaned = -0.00283386 Jy ! Component: 2500 - total flux cleaned = -0.00293683 Jy ! Component: 2550 - total flux cleaned = -0.00293668 Jy ! Component: 2600 - total flux cleaned = -0.00306363 Jy ! Component: 2650 - total flux cleaned = -0.00298753 Jy ! Component: 2700 - total flux cleaned = -0.00296266 Jy ! Component: 2750 - total flux cleaned = -0.00301269 Jy ! Component: 2800 - total flux cleaned = -0.00306254 Jy ! Component: 2850 - total flux cleaned = -0.00308735 Jy ! Component: 2900 - total flux cleaned = -0.00316151 Jy ! Component: 2950 - total flux cleaned = -0.00308793 Jy ! Component: 3000 - total flux cleaned = -0.00323441 Jy ! Component: 3050 - total flux cleaned = -0.00318563 Jy ! Component: 3100 - total flux cleaned = -0.00337935 Jy ! Component: 3150 - total flux cleaned = -0.00337911 Jy ! Component: 3200 - total flux cleaned = -0.00340298 Jy ! Component: 3250 - total flux cleaned = -0.00340295 Jy ! Component: 3300 - total flux cleaned = -0.00342688 Jy ! Component: 3350 - total flux cleaned = -0.00337976 Jy ! Component: 3400 - total flux cleaned = -0.0033797 Jy ! Component: 3450 - total flux cleaned = -0.00356702 Jy ! Component: 3500 - total flux cleaned = -0.00342685 Jy ! Component: 3550 - total flux cleaned = -0.00349648 Jy ! Component: 3600 - total flux cleaned = -0.00347339 Jy ! Component: 3650 - total flux cleaned = -0.00349643 Jy ! Component: 3700 - total flux cleaned = -0.00361111 Jy ! Component: 3750 - total flux cleaned = -0.00361125 Jy ! Component: 3800 - total flux cleaned = -0.00370203 Jy ! Component: 3850 - total flux cleaned = -0.00358888 Jy ! Component: 3900 - total flux cleaned = -0.00358887 Jy ! Component: 3950 - total flux cleaned = -0.0036564 Jy ! Component: 4000 - total flux cleaned = -0.00363418 Jy ! Component: 4050 - total flux cleaned = -0.00372326 Jy ! Total flux subtracted in 4096 components = -0.00378981 Jy ! Clean residual min=-0.001406 max=0.001370 Jy/beam ! Clean residual mean=0.000003 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.922173 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 495 components and 0.922173 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2320+0513_S_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.404 x 7.686 at 0.2544 degrees (North through East) ! Clean map min=-0.0023065 max=0.8516 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2320+0513_S_a_map.fits wmodel /vlbi/uf001/uvm//J2320+0513_S_a_map.mod ! Writing 495 model components to file: /vlbi/uf001/uvm//J2320+0513_S_a_map.mod wobs /vlbi/uf001/uvm//J2320+0513_S_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2320+0513_S_a_uvs.fits wwins /vlbi/uf001/uvm//J2320+0513_S_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J2320+0513_S_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.851597 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000423892 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.149328 0.149328 0.298657 0.597313 1.19463 2.38925 4.77851 9.55701 19.114 38.228 76.4561 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.851 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2009 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2320+0513_S_a_dfm.log closed on Sun Jan 13 22:44:00 2019