! Started logfile: /vlbi/uf001/uva//J2316+0405_S_b_dfm.log on Mon Jan 14 06:37:51 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2316+0405_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2316+0405_S_b_uva.fits
! AN table 1: 73 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.770059 visibilities/baseline/integration-bin.
! Found source: J2316+0405
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 4722 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2316+0405_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.055159Jy  sigma=18.680812
! Fit after  self-cal, rms=0.793819Jy  sigma=14.425517
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=11.54 mas, bpa=-15.86 degrees
! Estimated noise=0.802922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177854 Jy
! Component: 100  -  total flux cleaned = 0.277954 Jy
! Total flux subtracted in 100 components = 0.277954 Jy
! Clean residual min=-0.036511 max=0.070541 Jy/beam
! Clean residual mean=0.000077 rms=0.013716 Jy/beam
! Combined flux in latest and established models = 0.277954 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.277954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.236250Jy  sigma=3.569353
! Fit after  self-cal, rms=0.234379Jy  sigma=3.533881
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.013 mas, bmaj=11.81 mas, bpa=-15.64 degrees
! Estimated noise=0.597823 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.097935 Jy
! Component: 100  -  total flux cleaned = 0.156291 Jy
! Component: 150  -  total flux cleaned = 0.195832 Jy
! Component: 200  -  total flux cleaned = 0.224319 Jy
! Total flux subtracted in 200 components = 0.224319 Jy
! Clean residual min=-0.033902 max=0.050254 Jy/beam
! Clean residual mean=0.000133 rms=0.011402 Jy/beam
! Combined flux in latest and established models = 0.502273 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 91 components and 0.502273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.175976Jy  sigma=2.613011
! Fit after  self-cal, rms=0.174906Jy  sigma=2.591416
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.013 x 11.81 at -15.64 degrees (North through East)
! Clean map  min=-0.03467  max=0.21913 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.53     FD        1.04     HN        1.34     KP        1.04     
!   LA        0.76     MK        1.57     NL        1.41     PT        0.86     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.16     FD        0.91     HN        1.27     KP        1.03     
!   LA        0.83     MK        1.14     NL        0.61     PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.64     FD        1.00     HN        1.32     KP        1.07     
!   LA        0.80     MK        1.05     NL        1.22     PT        0.89     
! 
! 
! Fit before self-cal, rms=0.174906Jy  sigma=2.591416
! Fit after  self-cal, rms=0.153922Jy  sigma=1.973985
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.294 mas, bmaj=13.58 mas, bpa=-16.71 degrees
! Estimated noise=0.685347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00110991 Jy
! Component: 100  -  total flux cleaned = -0.00574726 Jy
! Component: 150  -  total flux cleaned = -0.00783703 Jy
! Component: 200  -  total flux cleaned = -0.0075485 Jy
! Total flux subtracted in 200 components = -0.0075485 Jy
! Clean residual min=-0.028783 max=0.039434 Jy/beam
! Clean residual mean=0.000053 rms=0.008863 Jy/beam
! Combined flux in latest and established models = 0.494724 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 106 components and 0.494724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.151160Jy  sigma=1.934713
! Fit after  self-cal, rms=0.151201Jy  sigma=1.922250
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.151201Jy  sigma=1.922250
! Fit after  self-cal, rms=0.173586Jy  sigma=1.716505
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.668 mas, bmaj=12.96 mas, bpa=-16.94 degrees
! Estimated noise=0.725763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00316596 Jy
! Component: 100  -  total flux cleaned = -0.0043564 Jy
! Component: 150  -  total flux cleaned = -0.00410223 Jy
! Component: 200  -  total flux cleaned = -0.00411977 Jy
! Total flux subtracted in 200 components = -0.00411977 Jy
! Clean residual min=-0.024834 max=0.034956 Jy/beam
! Clean residual mean=-0.000002 rms=0.008015 Jy/beam
! Combined flux in latest and established models = 0.490605 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 111 components and 0.490605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.172633Jy  sigma=1.700272
! Fit after  self-cal, rms=0.173061Jy  sigma=1.697215
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000822834 Jy
! Component: 100  -  total flux cleaned = -0.000584293 Jy
! Component: 150  -  total flux cleaned = -0.000142609 Jy
! Component: 200  -  total flux cleaned = 0.000270658 Jy
! Total flux subtracted in 200 components = 0.000270658 Jy
! Clean residual min=-0.024762 max=0.034302 Jy/beam
! Clean residual mean=-0.000001 rms=0.007949 Jy/beam
! Combined flux in latest and established models = 0.490875 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 116 components and 0.490875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.172496Jy  sigma=1.685938
! Fit after  self-cal, rms=0.172319Jy  sigma=1.684872
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.172319Jy  sigma=1.684872
! Fit after  self-cal, rms=0.173394Jy  sigma=1.683405
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.586 mas, bmaj=13.15 mas, bpa=-17.06 degrees
! Estimated noise=0.722085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00187996 Jy
! Component: 100  -  total flux cleaned = -0.00212599 Jy
! Component: 150  -  total flux cleaned = -0.00193415 Jy
! Component: 200  -  total flux cleaned = -0.00155464 Jy
! Total flux subtracted in 200 components = -0.00155464 Jy
! Clean residual min=-0.024082 max=0.034000 Jy/beam
! Clean residual mean=-0.000006 rms=0.007809 Jy/beam
! Combined flux in latest and established models = 0.489321 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 119 components and 0.489321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.172881Jy  sigma=1.674219
! Fit after  self-cal, rms=0.172751Jy  sigma=1.673377
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-24, -51.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02913 Jy
! Component: 100  -  total flux cleaned = 0.0345965 Jy
! Component: 150  -  total flux cleaned = 0.0381825 Jy
! Component: 200  -  total flux cleaned = 0.0421536 Jy
! Total flux subtracted in 200 components = 0.0421536 Jy
! Clean residual min=-0.021918 max=0.023753 Jy/beam
! Clean residual mean=-0.000015 rms=0.006216 Jy/beam
! Combined flux in latest and established models = 0.531474 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 155 components and 0.531474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166308Jy  sigma=1.545528
! Fit after  self-cal, rms=0.166169Jy  sigma=1.536618
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166169Jy  sigma=1.536618
! Fit after  self-cal, rms=0.168805Jy  sigma=1.513585
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.77 mas, bmaj=13.77 mas, bpa=-17.62 degrees
! Estimated noise=0.739872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123044 Jy
! Component: 100  -  total flux cleaned = 0.0149444 Jy
! Component: 150  -  total flux cleaned = 0.0185617 Jy
! Component: 200  -  total flux cleaned = 0.0223179 Jy
! Total flux subtracted in 200 components = 0.0223179 Jy
! Clean residual min=-0.019715 max=0.023849 Jy/beam
! Clean residual mean=0.000001 rms=0.006100 Jy/beam
! Combined flux in latest and established models = 0.553792 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 168 components and 0.553792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166855Jy  sigma=1.476143
! Fit after  self-cal, rms=0.167027Jy  sigma=1.473641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025506 Jy
! Component: 100  -  total flux cleaned = 0.00425625 Jy
! Component: 150  -  total flux cleaned = 0.00620262 Jy
! Component: 200  -  total flux cleaned = 0.00758531 Jy
! Total flux subtracted in 200 components = 0.00758531 Jy
! Clean residual min=-0.019303 max=0.021983 Jy/beam
! Clean residual mean=0.000001 rms=0.005826 Jy/beam
! Combined flux in latest and established models = 0.561378 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 187 components and 0.561378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.166315Jy  sigma=1.460815
! Fit after  self-cal, rms=0.166404Jy  sigma=1.460169
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=13.33 mas, bpa=-17.15 degrees
! Estimated noise=0.713954 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.569 x 13.33 at -17.15 degrees (North through East)
! Clean map  min=-0.020051  max=0.24038 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.776 mas, bmaj=12.94 mas, bpa=-17.54 degrees
! Estimated noise=1.05496 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.22451 Jy
! Component: 100  -  total flux cleaned = 0.337464 Jy
! Component: 150  -  total flux cleaned = 0.397478 Jy
! Component: 200  -  total flux cleaned = 0.433123 Jy
! Total flux subtracted in 200 components = 0.433123 Jy
! Clean residual min=-0.030327 max=0.036407 Jy/beam
! Clean residual mean=0.000001 rms=0.009548 Jy/beam
! Combined flux in latest and established models = 0.433123 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.433123 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=13.33 mas, bpa=-17.15 degrees
! Estimated noise=0.713954 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0383623 Jy
! Component: 100  -  total flux cleaned = 0.062241 Jy
! Component: 150  -  total flux cleaned = 0.0788174 Jy
! Component: 200  -  total flux cleaned = 0.086611 Jy
! Total flux subtracted in 200 components = 0.086611 Jy
! Clean residual min=-0.023280 max=0.021143 Jy/beam
! Clean residual mean=-0.000002 rms=0.005790 Jy/beam
! Combined flux in latest and established models = 0.519734 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 70 components and 0.519734 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.77 mas, bmaj=13.77 mas, bpa=-17.62 degrees
! Estimated noise=0.739872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171928 Jy
! Component: 100  -  total flux cleaned = 0.0284286 Jy
! Component: 150  -  total flux cleaned = 0.0339572 Jy
! Component: 200  -  total flux cleaned = 0.0389227 Jy
! Total flux subtracted in 200 components = 0.0389227 Jy
! Clean residual min=-0.020554 max=0.019733 Jy/beam
! Clean residual mean=-0.000009 rms=0.005539 Jy/beam
! Combined flux in latest and established models = 0.558657 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00452686 Jy
! Component: 100  -  total flux cleaned = 0.00869744 Jy
! Component: 150  -  total flux cleaned = 0.0128286 Jy
! Component: 200  -  total flux cleaned = 0.0166087 Jy
! Total flux subtracted in 200 components = 0.0166087 Jy
! Clean residual min=-0.018953 max=0.018052 Jy/beam
! Clean residual mean=-0.000012 rms=0.004985 Jy/beam
! Combined flux in latest and established models = 0.575265 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 105 components and 0.575265 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.569 mas, bmaj=13.33 mas, bpa=-17.15 degrees
! Estimated noise=0.713954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0023435 Jy
! Component: 100  -  total flux cleaned = -9.91566e-05 Jy
! Component: 150  -  total flux cleaned = 0.00132735 Jy
! Component: 200  -  total flux cleaned = 0.00263742 Jy
! Total flux subtracted in 200 components = 0.00263742 Jy
! Clean residual min=-0.019026 max=0.015878 Jy/beam
! Clean residual mean=-0.000012 rms=0.004182 Jy/beam
! Combined flux in latest and established models = 0.577903 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 135 components and 0.577903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.163745Jy  sigma=1.408681
! Fit after  self-cal, rms=0.162795Jy  sigma=1.396297
wmodel J2316+0405_S_b_map.mod
! Writing 135 model components to file: J2316+0405_S_b_map.mod
wobs   J2316+0405_S_b_uvs.fits
! Writing UV FITS file: J2316+0405_S_b_uvs.fits
wwins  J2316+0405_S_b_map.win
! wwins: Wrote 3 windows to J2316+0405_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0071043 Jy
! Component: 100  -  total flux cleaned = -0.00762551 Jy
! Component: 150  -  total flux cleaned = -0.00808762 Jy
! Component: 200  -  total flux cleaned = -0.00829715 Jy
! Component: 250  -  total flux cleaned = -0.00752055 Jy
! Component: 300  -  total flux cleaned = -0.00662065 Jy
! Component: 350  -  total flux cleaned = -0.00543157 Jy
! Component: 400  -  total flux cleaned = -0.00463146 Jy
! Component: 450  -  total flux cleaned = -0.00387158 Jy
! Component: 500  -  total flux cleaned = -0.00300829 Jy
! Component: 550  -  total flux cleaned = -0.00287733 Jy
! Component: 600  -  total flux cleaned = -0.00275367 Jy
! Component: 650  -  total flux cleaned = -0.00275853 Jy
! Component: 700  -  total flux cleaned = -0.00276471 Jy
! Component: 750  -  total flux cleaned = -0.00333382 Jy
! Component: 800  -  total flux cleaned = -0.00366122 Jy
! Component: 850  -  total flux cleaned = -0.00376532 Jy
! Component: 900  -  total flux cleaned = -0.00366224 Jy
! Component: 950  -  total flux cleaned = -0.0030718 Jy
! Component: 1000  -  total flux cleaned = -0.00269171 Jy
! Component: 1050  -  total flux cleaned = -0.00232253 Jy
! Component: 1100  -  total flux cleaned = -0.00196369 Jy
! Component: 1150  -  total flux cleaned = -0.00153327 Jy
! Component: 1200  -  total flux cleaned = -0.00103484 Jy
! Component: 1250  -  total flux cleaned = -0.00054901 Jy
! Component: 1300  -  total flux cleaned = -7.78991e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000305457 Jy
! Component: 1400  -  total flux cleaned = 0.000604581 Jy
! Component: 1450  -  total flux cleaned = 0.00118083 Jy
! Component: 1500  -  total flux cleaned = 0.00138932 Jy
! Component: 1550  -  total flux cleaned = 0.00214051 Jy
! Component: 1600  -  total flux cleaned = 0.00253878 Jy
! Component: 1650  -  total flux cleaned = 0.00312324 Jy
! Component: 1700  -  total flux cleaned = 0.00356499 Jy
! Component: 1750  -  total flux cleaned = 0.00387451 Jy
! Component: 1800  -  total flux cleaned = 0.00411879 Jy
! Component: 1850  -  total flux cleaned = 0.00453496 Jy
! Component: 1900  -  total flux cleaned = 0.00453552 Jy
! Component: 1950  -  total flux cleaned = 0.00465017 Jy
! Component: 2000  -  total flux cleaned = 0.0047069 Jy
! Component: 2050  -  total flux cleaned = 0.00509154 Jy
! Component: 2100  -  total flux cleaned = 0.00498312 Jy
! Component: 2150  -  total flux cleaned = 0.00514178 Jy
! Component: 2200  -  total flux cleaned = 0.00514216 Jy
! Component: 2250  -  total flux cleaned = 0.00519301 Jy
! Component: 2300  -  total flux cleaned = 0.00524327 Jy
! Component: 2350  -  total flux cleaned = 0.00519325 Jy
! Component: 2400  -  total flux cleaned = 0.00499671 Jy
! Component: 2450  -  total flux cleaned = 0.00489913 Jy
! Component: 2500  -  total flux cleaned = 0.00470773 Jy
! Component: 2550  -  total flux cleaned = 0.00489606 Jy
! Component: 2600  -  total flux cleaned = 0.00498903 Jy
! Component: 2650  -  total flux cleaned = 0.0050354 Jy
! Component: 2700  -  total flux cleaned = 0.00517295 Jy
! Component: 2750  -  total flux cleaned = 0.00521893 Jy
! Component: 2800  -  total flux cleaned = 0.0053535 Jy
! Component: 2850  -  total flux cleaned = 0.00522083 Jy
! Component: 2900  -  total flux cleaned = 0.00535225 Jy
! Component: 2950  -  total flux cleaned = 0.00543927 Jy
! Component: 3000  -  total flux cleaned = 0.00539577 Jy
! Component: 3050  -  total flux cleaned = 0.00552398 Jy
! Component: 3100  -  total flux cleaned = 0.00543879 Jy
! Component: 3150  -  total flux cleaned = 0.00539653 Jy
! Component: 3200  -  total flux cleaned = 0.00535454 Jy
! Component: 3250  -  total flux cleaned = 0.0052711 Jy
! Component: 3300  -  total flux cleaned = 0.00514708 Jy
! Component: 3350  -  total flux cleaned = 0.00522914 Jy
! Component: 3400  -  total flux cleaned = 0.00510656 Jy
! Component: 3450  -  total flux cleaned = 0.00502525 Jy
! Component: 3500  -  total flux cleaned = 0.00498495 Jy
! Component: 3550  -  total flux cleaned = 0.00494495 Jy
! Component: 3600  -  total flux cleaned = 0.00502514 Jy
! Component: 3650  -  total flux cleaned = 0.00498537 Jy
! Component: 3700  -  total flux cleaned = 0.00486676 Jy
! Component: 3750  -  total flux cleaned = 0.00482735 Jy
! Component: 3800  -  total flux cleaned = 0.00478817 Jy
! Component: 3850  -  total flux cleaned = 0.00467082 Jy
! Component: 3900  -  total flux cleaned = 0.00455366 Jy
! Component: 3950  -  total flux cleaned = 0.00451458 Jy
! Component: 4000  -  total flux cleaned = 0.00451439 Jy
! Component: 4050  -  total flux cleaned = 0.00455318 Jy
! Total flux subtracted in 4096 components = 0.00447602 Jy
! Clean residual min=-0.002276 max=0.002022 Jy/beam
! Clean residual mean=-0.000008 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.582379 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 410 components and 0.582379 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2316+0405_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.569 x 13.33 at -17.15 degrees (North through East)
! Clean map  min=-0.016374  max=0.23961 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2316+0405_S_b_map.fits
wmodel /vlbi/uf001/uva//J2316+0405_S_b_map.mod
! Writing 410 model components to file: /vlbi/uf001/uva//J2316+0405_S_b_map.mod
wobs   /vlbi/uf001/uva//J2316+0405_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2316+0405_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J2316+0405_S_b_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2316+0405_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.23961 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000688851 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.862465 0.862465 1.72493 3.44986 6.89972 13.7994 27.5989 55.1978
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.239 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  347.84 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2316+0405_S_b_dfm.log closed on Mon Jan 14 06:37:56 2019