! Started logfile: /vlbi/uf001/uva//J2314-4455_S_dfm.log on Mon Jan 14 06:37:10 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2314-4455_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2314-4455_S_uva.fits
! AN table 1: 88 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.692424 visibilities/baseline/integration-bin.
! Found source: J2314-4455
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 2742 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2314-4455_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.676955Jy  sigma=14.720672
! Fit after  self-cal, rms=0.575322Jy  sigma=4.996040
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.26 mas, bmaj=65.96 mas, bpa=-5.033 degrees
! Estimated noise=1.98594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.922782 Jy
! Component: 100  -  total flux cleaned = 1.28687 Jy
! Total flux subtracted in 100 components = 1.28687 Jy
! Clean residual min=-0.115276 max=0.163875 Jy/beam
! Clean residual mean=-0.000919 rms=0.049103 Jy/beam
! Combined flux in latest and established models = 1.28687 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 1.28687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.365234Jy  sigma=3.183230
! Fit after  self-cal, rms=0.364814Jy  sigma=3.179818
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.22 mas, bmaj=60.59 mas, bpa=-3.352 degrees
! Estimated noise=1.52875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.205403 Jy
! Component: 100  -  total flux cleaned = 0.318582 Jy
! Component: 150  -  total flux cleaned = 0.376901 Jy
! Component: 200  -  total flux cleaned = 0.383075 Jy
! Total flux subtracted in 200 components = 0.383075 Jy
! Clean residual min=-0.066718 max=0.068758 Jy/beam
! Clean residual mean=-0.000057 rms=0.023142 Jy/beam
! Combined flux in latest and established models = 1.66994 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 115 components and 1.66994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.210803Jy  sigma=1.857102
! Fit after  self-cal, rms=0.210591Jy  sigma=1.855499
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.22 x 60.59 at -3.352 degrees (North through East)
! Clean map  min=-0.067037  max=1.2301 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.94     KP        1.03     LA        0.94     NL        1.51     
!   OV        0.97     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.89     KP        1.02     LA        0.95     NL        1.49     
!   OV        0.91     PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.03     LA        0.96     NL        1.41     
!   OV        1.01     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.210591Jy  sigma=1.855499
! Fit after  self-cal, rms=0.173853Jy  sigma=1.368878
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.875 mas, bmaj=59.67 mas, bpa=-2.224 degrees
! Estimated noise=1.57896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108024 Jy
! Component: 100  -  total flux cleaned = -4.34254e-05 Jy
! Component: 150  -  total flux cleaned = -0.00676555 Jy
! Component: 200  -  total flux cleaned = -0.0144996 Jy
! Total flux subtracted in 200 components = -0.0144996 Jy
! Clean residual min=-0.031029 max=0.027875 Jy/beam
! Clean residual mean=0.000380 rms=0.009425 Jy/beam
! Combined flux in latest and established models = 1.65544 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 164 components and 1.65544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.156922Jy  sigma=1.207797
! Fit after  self-cal, rms=0.156975Jy  sigma=1.207332
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.156975Jy  sigma=1.207332
! Fit after  self-cal, rms=0.144988Jy  sigma=1.037616
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.973 mas, bmaj=59.91 mas, bpa=-2.14 degrees
! Estimated noise=1.59336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00460613 Jy
! Component: 100  -  total flux cleaned = -0.00567538 Jy
! Component: 150  -  total flux cleaned = -0.00478508 Jy
! Component: 200  -  total flux cleaned = -0.00367521 Jy
! Total flux subtracted in 200 components = -0.00367521 Jy
! Clean residual min=-0.017824 max=0.018443 Jy/beam
! Clean residual mean=0.000031 rms=0.006105 Jy/beam
! Combined flux in latest and established models = 1.65177 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 185 components and 1.65177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140626Jy  sigma=1.013867
! Fit after  self-cal, rms=0.140625Jy  sigma=1.013610
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00138258 Jy
! Component: 100  -  total flux cleaned = 0.00198762 Jy
! Component: 150  -  total flux cleaned = 0.00282235 Jy
! Component: 200  -  total flux cleaned = 0.0038157 Jy
! Total flux subtracted in 200 components = 0.0038157 Jy
! Clean residual min=-0.017761 max=0.018211 Jy/beam
! Clean residual mean=0.000039 rms=0.005798 Jy/beam
! Combined flux in latest and established models = 1.65558 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 203 components and 1.65558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138984Jy  sigma=1.006780
! Fit after  self-cal, rms=0.138977Jy  sigma=1.006663
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138977Jy  sigma=1.006663
! Fit after  self-cal, rms=0.138918Jy  sigma=0.977366
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.03 mas, bmaj=60.01 mas, bpa=-2.089 degrees
! Estimated noise=1.59801 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00585122 Jy
! Component: 100  -  total flux cleaned = -0.00591733 Jy
! Component: 150  -  total flux cleaned = -0.00484794 Jy
! Component: 200  -  total flux cleaned = -0.00388328 Jy
! Total flux subtracted in 200 components = -0.00388328 Jy
! Clean residual min=-0.013330 max=0.016390 Jy/beam
! Clean residual mean=-0.000035 rms=0.004850 Jy/beam
! Combined flux in latest and established models = 1.6517 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 225 components and 1.6517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137259Jy  sigma=0.968705
! Fit after  self-cal, rms=0.137277Jy  sigma=0.968575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000690276 Jy
! Component: 100  -  total flux cleaned = 0.0016461 Jy
! Component: 150  -  total flux cleaned = 0.00232832 Jy
! Component: 200  -  total flux cleaned = 0.00293657 Jy
! Total flux subtracted in 200 components = 0.00293657 Jy
! Clean residual min=-0.012310 max=0.016234 Jy/beam
! Clean residual mean=-0.000032 rms=0.004731 Jy/beam
! Combined flux in latest and established models = 1.65464 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 235 components and 1.65464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136605Jy  sigma=0.965964
! Fit after  self-cal, rms=0.136602Jy  sigma=0.965898
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.136602Jy  sigma=0.965898
! Fit after  self-cal, rms=0.138227Jy  sigma=0.963541
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.17 mas, bmaj=63.28 mas, bpa=-1.354 degrees
! Estimated noise=1.59179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00472963 Jy
! Component: 100  -  total flux cleaned = -0.00595429 Jy
! Component: 150  -  total flux cleaned = -0.00644558 Jy
! Component: 200  -  total flux cleaned = -0.0063417 Jy
! Total flux subtracted in 200 components = -0.0063417 Jy
! Clean residual min=-0.012328 max=0.015513 Jy/beam
! Clean residual mean=-0.000038 rms=0.004555 Jy/beam
! Combined flux in latest and established models = 1.64829 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 261 components and 1.64829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137679Jy  sigma=0.960139
! Fit after  self-cal, rms=0.137687Jy  sigma=0.960050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336124 Jy
! Component: 100  -  total flux cleaned = 0.00050412 Jy
! Component: 150  -  total flux cleaned = 0.000750622 Jy
! Component: 200  -  total flux cleaned = 0.000981731 Jy
! Total flux subtracted in 200 components = 0.000981731 Jy
! Clean residual min=-0.011918 max=0.015364 Jy/beam
! Clean residual mean=-0.000037 rms=0.004534 Jy/beam
! Combined flux in latest and established models = 1.64928 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 273 components and 1.64928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137460Jy  sigma=0.959151
! Fit after  self-cal, rms=0.137459Jy  sigma=0.959104
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.07 mas, bmaj=60.1 mas, bpa=-2.047 degrees
! Estimated noise=1.60172 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.07 x 60.1 at -2.047 degrees (North through East)
! Clean map  min=-0.019213  max=1.2604 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137459Jy  sigma=0.959104
! Fit after  self-cal, rms=0.124743Jy  sigma=0.804299
! Inverting map and beam 
! Estimated beam: bmin=10.1 mas, bmaj=60.16 mas, bpa=-2.025 degrees
! Estimated noise=1.60408 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00428937 Jy
! Component: 100  -  total flux cleaned = -0.00537345 Jy
! Component: 150  -  total flux cleaned = -0.00527431 Jy
! Component: 200  -  total flux cleaned = -0.00507745 Jy
! Total flux subtracted in 200 components = -0.00507745 Jy
! Clean residual min=-0.010460 max=0.014957 Jy/beam
! Clean residual mean=-0.000016 rms=0.004102 Jy/beam
! Combined flux in latest and established models = 1.6442 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 296 components and 1.6442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124369Jy  sigma=0.801882
! Fit after  self-cal, rms=0.124367Jy  sigma=0.801852
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387372 Jy
! Component: 100  -  total flux cleaned = 0.000631343 Jy
! Component: 150  -  total flux cleaned = 0.000851396 Jy
! Component: 200  -  total flux cleaned = 0.000985984 Jy
! Total flux subtracted in 200 components = 0.000985984 Jy
! Clean residual min=-0.010097 max=0.014889 Jy/beam
! Clean residual mean=-0.000012 rms=0.004074 Jy/beam
! Combined flux in latest and established models = 1.64518 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 310 components and 1.64518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124225Jy  sigma=0.801253
! Fit after  self-cal, rms=0.124225Jy  sigma=0.801237
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124225Jy  sigma=0.801237
! Fit after  self-cal, rms=0.125179Jy  sigma=0.800336
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.203 mas, bmaj=62.96 mas, bpa=-3.969 degrees
! Estimated noise=2.21716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.987688 Jy
! Component: 100  -  total flux cleaned = 1.30545 Jy
! Component: 150  -  total flux cleaned = 1.45874 Jy
! Component: 200  -  total flux cleaned = 1.53869 Jy
! Total flux subtracted in 200 components = 1.53869 Jy
! Clean residual min=-0.026447 max=0.037769 Jy/beam
! Clean residual mean=-0.000271 rms=0.011125 Jy/beam
! Combined flux in latest and established models = 1.53869 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 1.53869 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.13 mas, bmaj=60.22 mas, bpa=-2.001 degrees
! Estimated noise=1.6063 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0456183 Jy
! Component: 100  -  total flux cleaned = 0.071238 Jy
! Component: 150  -  total flux cleaned = 0.0876115 Jy
! Component: 200  -  total flux cleaned = 0.0914992 Jy
! Total flux subtracted in 200 components = 0.0914992 Jy
! Clean residual min=-0.018448 max=0.014686 Jy/beam
! Clean residual mean=-0.000006 rms=0.005801 Jy/beam
! Combined flux in latest and established models = 1.63019 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 151 components and 1.63019 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.22 mas, bmaj=63.43 mas, bpa=-1.316 degrees
! Estimated noise=1.59403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0021041 Jy
! Component: 100  -  total flux cleaned = 0.00277885 Jy
! Component: 150  -  total flux cleaned = 0.00391251 Jy
! Component: 200  -  total flux cleaned = 0.00463818 Jy
! Total flux subtracted in 200 components = 0.00463818 Jy
! Clean residual min=-0.015255 max=0.015108 Jy/beam
! Clean residual mean=0.000010 rms=0.005497 Jy/beam
! Combined flux in latest and established models = 1.63483 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811163 Jy
! Component: 100  -  total flux cleaned = 0.00133039 Jy
! Component: 150  -  total flux cleaned = 0.00147638 Jy
! Component: 200  -  total flux cleaned = 0.00161606 Jy
! Total flux subtracted in 200 components = 0.00161606 Jy
! Clean residual min=-0.014533 max=0.015323 Jy/beam
! Clean residual mean=0.000018 rms=0.005260 Jy/beam
! Combined flux in latest and established models = 1.63644 Jy
! Adding 105 model components to the UV plane model.
! The established model now contains 236 components and 1.63644 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.13 mas, bmaj=60.22 mas, bpa=-2.001 degrees
! Estimated noise=1.6063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000883298 Jy
! Component: 100  -  total flux cleaned = 0.00151406 Jy
! Component: 150  -  total flux cleaned = 0.00186126 Jy
! Component: 200  -  total flux cleaned = 0.00174887 Jy
! Total flux subtracted in 200 components = 0.00174887 Jy
! Clean residual min=-0.013750 max=0.015118 Jy/beam
! Clean residual mean=0.000024 rms=0.004810 Jy/beam
! Combined flux in latest and established models = 1.63819 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 272 components and 1.63819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126235Jy  sigma=0.811746
! Fit after  self-cal, rms=0.126218Jy  sigma=0.811338
wmodel J2314-4455_S_map.mod
! Writing 272 model components to file: J2314-4455_S_map.mod
wobs   J2314-4455_S_uvs.fits
! Writing UV FITS file: J2314-4455_S_uvs.fits
wwins  J2314-4455_S_map.win
! wwins: Wrote 1 windows to J2314-4455_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177598 Jy
! Component: 100  -  total flux cleaned = 0.000172178 Jy
! Component: 150  -  total flux cleaned = -0.00106365 Jy
! Component: 200  -  total flux cleaned = -0.0026656 Jy
! Component: 250  -  total flux cleaned = -0.00280709 Jy
! Component: 300  -  total flux cleaned = -0.0028094 Jy
! Component: 350  -  total flux cleaned = -0.00255758 Jy
! Component: 400  -  total flux cleaned = -0.00208936 Jy
! Component: 450  -  total flux cleaned = -0.00187144 Jy
! Component: 500  -  total flux cleaned = -0.00145876 Jy
! Component: 550  -  total flux cleaned = -0.00107231 Jy
! Component: 600  -  total flux cleaned = -0.000517461 Jy
! Component: 650  -  total flux cleaned = 9.82865e-05 Jy
! Component: 700  -  total flux cleaned = 0.000767531 Jy
! Component: 750  -  total flux cleaned = 0.00108832 Jy
! Component: 800  -  total flux cleaned = 0.00155554 Jy
! Component: 850  -  total flux cleaned = 0.00215454 Jy
! Component: 900  -  total flux cleaned = 0.00251666 Jy
! Component: 950  -  total flux cleaned = 0.00293785 Jy
! Component: 1000  -  total flux cleaned = 0.00341208 Jy
! Component: 1050  -  total flux cleaned = 0.00380605 Jy
! Component: 1100  -  total flux cleaned = 0.00412097 Jy
! Component: 1150  -  total flux cleaned = 0.00436508 Jy
! Component: 1200  -  total flux cleaned = 0.00460164 Jy
! Component: 1250  -  total flux cleaned = 0.00488991 Jy
! Component: 1300  -  total flux cleaned = 0.00511391 Jy
! Component: 1350  -  total flux cleaned = 0.0052231 Jy
! Component: 1400  -  total flux cleaned = 0.0055422 Jy
! Component: 1450  -  total flux cleaned = 0.00580096 Jy
! Component: 1500  -  total flux cleaned = 0.00600157 Jy
! Component: 1550  -  total flux cleaned = 0.00629671 Jy
! Component: 1600  -  total flux cleaned = 0.00677973 Jy
! Component: 1650  -  total flux cleaned = 0.0073457 Jy
! Component: 1700  -  total flux cleaned = 0.00794605 Jy
! Component: 1750  -  total flux cleaned = 0.00853463 Jy
! Component: 1800  -  total flux cleaned = 0.00920008 Jy
! Component: 1850  -  total flux cleaned = 0.00972236 Jy
! Component: 1900  -  total flux cleaned = 0.0102786 Jy
! Component: 1950  -  total flux cleaned = 0.0107416 Jy
! Component: 2000  -  total flux cleaned = 0.0111979 Jy
! Component: 2050  -  total flux cleaned = 0.0116876 Jy
! Component: 2100  -  total flux cleaned = 0.0121303 Jy
! Component: 2150  -  total flux cleaned = 0.0126461 Jy
! Component: 2200  -  total flux cleaned = 0.0131156 Jy
! Component: 2250  -  total flux cleaned = 0.0135403 Jy
! Component: 2300  -  total flux cleaned = 0.0139217 Jy
! Component: 2350  -  total flux cleaned = 0.0145245 Jy
! Component: 2400  -  total flux cleaned = 0.0150093 Jy
! Component: 2450  -  total flux cleaned = 0.0155999 Jy
! Component: 2500  -  total flux cleaned = 0.0161844 Jy
! Component: 2550  -  total flux cleaned = 0.0167625 Jy
! Component: 2600  -  total flux cleaned = 0.0172638 Jy
! Component: 2650  -  total flux cleaned = 0.017868 Jy
! Component: 2700  -  total flux cleaned = 0.0185029 Jy
! Component: 2750  -  total flux cleaned = 0.0190977 Jy
! Component: 2800  -  total flux cleaned = 0.0195843 Jy
! Component: 2850  -  total flux cleaned = 0.020171 Jy
! Component: 2900  -  total flux cleaned = 0.0207193 Jy
! Component: 2950  -  total flux cleaned = 0.0212649 Jy
! Component: 3000  -  total flux cleaned = 0.0217746 Jy
! Component: 3050  -  total flux cleaned = 0.0223508 Jy
! Component: 3100  -  total flux cleaned = 0.0228923 Jy
! Component: 3150  -  total flux cleaned = 0.0234334 Jy
! Component: 3200  -  total flux cleaned = 0.0240426 Jy
! Component: 3250  -  total flux cleaned = 0.0246188 Jy
! Component: 3300  -  total flux cleaned = 0.0252301 Jy
! Component: 3350  -  total flux cleaned = 0.0257745 Jy
! Component: 3400  -  total flux cleaned = 0.0263887 Jy
! Component: 3450  -  total flux cleaned = 0.0270046 Jy
! Component: 3500  -  total flux cleaned = 0.027588 Jy
! Component: 3550  -  total flux cleaned = 0.0281728 Jy
! Component: 3600  -  total flux cleaned = 0.0287604 Jy
! Component: 3650  -  total flux cleaned = 0.0293163 Jy
! Component: 3700  -  total flux cleaned = 0.0297708 Jy
! Component: 3750  -  total flux cleaned = 0.0301231 Jy
! Component: 3800  -  total flux cleaned = 0.0304793 Jy
! Component: 3850  -  total flux cleaned = 0.0308396 Jy
! Component: 3900  -  total flux cleaned = 0.0311678 Jy
! Component: 3950  -  total flux cleaned = 0.031426 Jy
! Component: 4000  -  total flux cleaned = 0.0317622 Jy
! Component: 4050  -  total flux cleaned = 0.0320271 Jy
! Total flux subtracted in 4096 components = 0.0322952 Jy
! Clean residual min=-0.002081 max=0.002432 Jy/beam
! Clean residual mean=-0.000010 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 1.67049 Jy
keep
! Adding 536 model components to the UV plane model.
! The established model now contains 808 components and 1.67049 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2314-4455_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.13 x 60.22 at -2.001 degrees (North through East)
! Clean map  min=-0.0087167  max=1.2895 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2314-4455_S_map.fits
wmodel /vlbi/uf001/uva//J2314-4455_S_map.mod
! Writing 808 model components to file: /vlbi/uf001/uva//J2314-4455_S_map.mod
wobs   /vlbi/uf001/uva//J2314-4455_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2314-4455_S_uvs.fits
wwins  /vlbi/uf001/uva//J2314-4455_S_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2314-4455_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.28955 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000732649 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.170443 0.170443 0.340886 0.681772 1.36354 2.72709 5.45417 10.9083 21.8167 43.6334 87.2668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0021 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.289 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1760.12 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2314-4455_S_dfm.log closed on Mon Jan 14 06:37:16 2019