! Started logfile: /vlbi/uf001/uvm//J2313-3704_X_a_dfm.log on Sun Jan 13 22:43:24 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2313-3704_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2313-3704_X_a_uvm.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! AN table 2: 36 integrations on 15 of 15 possible baselines. ! AN table 3: 36 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.767537 visibilities/baseline/integration-bin. ! Found source: J2313-3704 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 35976 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2313-3704_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 135 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.023752Jy sigma=17.638957 ! Fit after self-cal, rms=0.813326Jy sigma=13.608052 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6496 mas, bmaj=1.77 mas, bpa=-1.351 degrees ! Estimated noise=0.572834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142139 Jy ! Component: 100 - total flux cleaned = 0.180075 Jy ! Total flux subtracted in 100 components = 0.180075 Jy ! Clean residual min=-0.015392 max=0.026289 Jy/beam ! Clean residual mean=0.000052 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 0.180075 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.180075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104315Jy sigma=1.623189 ! Fit after self-cal, rms=0.104155Jy sigma=1.622245 ! Inverting map ! Added new window around map position (-1, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226874 Jy ! Component: 100 - total flux cleaned = 0.0334116 Jy ! Total flux subtracted in 100 components = 0.0334116 Jy ! Clean residual min=-0.010657 max=0.019157 Jy/beam ! Clean residual mean=0.000037 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.213486 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.213486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097638Jy sigma=1.448520 ! Fit after self-cal, rms=0.097072Jy sigma=1.434092 ! Inverting map ! Added new window around map position (-1, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159874 Jy ! Component: 100 - total flux cleaned = 0.023411 Jy ! Total flux subtracted in 100 components = 0.023411 Jy ! Clean residual min=-0.008636 max=0.015273 Jy/beam ! Clean residual mean=0.000028 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 0.236897 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.236897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094103Jy sigma=1.368403 ! Fit after self-cal, rms=0.093642Jy sigma=1.353744 ! Inverting map ! Added new window around map position (1.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138142 Jy ! Component: 100 - total flux cleaned = 0.0232839 Jy ! Total flux subtracted in 100 components = 0.0232839 Jy ! Clean residual min=-0.008196 max=0.008832 Jy/beam ! Clean residual mean=0.000019 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.260181 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.260181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090653Jy sigma=1.296472 ! Fit after self-cal, rms=0.090493Jy sigma=1.294478 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.898 mas, bmaj=2.474 mas, bpa=-1.564 degrees ! Estimated noise=0.225726 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00961208 Jy ! Component: 100 - total flux cleaned = 0.0119094 Jy ! Component: 150 - total flux cleaned = 0.0132366 Jy ! Component: 200 - total flux cleaned = 0.0145478 Jy ! Total flux subtracted in 200 components = 0.0145478 Jy ! Clean residual min=-0.007092 max=0.007742 Jy/beam ! Clean residual mean=0.000027 rms=0.001933 Jy/beam ! Combined flux in latest and established models = 0.274729 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.274729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088848Jy sigma=1.273998 ! Fit after self-cal, rms=0.088684Jy sigma=1.272012 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.898 x 2.474 at -1.564 degrees (North through East) ! Clean map min=-0.0068239 max=0.17162 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.97 HN 1.64 KP 0.95 ! LA 1.01 MK 1.00 NL 1.23 OV 0.88 ! PT 0.90 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.32 KP 1.02 LA 1.01 ! NL 0.99 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.95 KP 1.00 LA 1.03 ! MK 0.98 NL 1.56 OV 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.98 HN 1.51 KP 0.96 ! LA 1.03 MK 1.00 NL 1.16 OV 0.88 ! PT 0.91 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.25 KP 1.02 LA 1.00 ! NL 1.02 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.95 KP 0.99 LA 1.02 ! MK 0.99 NL 1.65 OV 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.97 HN 1.65 KP 0.96 ! LA 1.01 MK 0.98 NL 1.30 OV 0.88 ! PT 0.91 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.36 KP 1.00 LA 0.99 ! NL 0.95 OV 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 KP 1.02 LA 1.02 ! MK 1.01 NL 1.61 OV 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.98 HN 1.49 KP 0.95 ! LA 1.01 MK 1.05 NL 1.19 OV 0.90 ! PT 0.91 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.21 KP 1.04 LA 1.01 ! NL 1.04 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.95 KP 1.03 LA 1.04 ! MK 1.00 NL 1.52 OV 0.87 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.99 HN 1.51 KP 0.97 ! LA 1.01 MK 0.99 NL 1.22 OV 0.90 ! PT 0.92 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.26 KP 1.02 LA 0.98 ! NL 1.03 OV 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 0.95 KP 1.01 LA 1.06 ! MK 1.00 NL 1.61 OV 0.87 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.98 HN 1.48 KP 0.99 ! LA 1.01 MK 0.99 NL 1.24 OV 0.92 ! PT 0.90 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.32 KP 1.04 LA 1.02 ! NL 1.03 OV 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.96 KP 1.03 LA 1.04 ! MK 0.98 NL 1.76 OV 0.86 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 1.51 KP 0.98 ! LA 1.01 MK 1.00 NL 1.21 OV 0.90 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.49 KP 1.04 LA 0.99 ! NL 1.00 OV 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 0.97 KP 1.02 LA 1.04 ! MK 0.98 NL 1.63 OV 0.89 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 1.72 KP 0.96 ! LA 1.01 MK 1.02 NL 1.16 OV 0.90 ! PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.18 KP 1.02 LA 0.96 ! NL 1.00 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.98 KP 1.04 LA 1.04 ! MK 0.98 NL 1.60 OV 0.88 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.99 HN 1.54 KP 0.96 ! LA 1.01 MK 1.02 NL 1.25 OV 0.89 ! PT 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.98 HN 1.20 KP 1.01 LA 0.98 ! NL 1.04 OV 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 0.96 KP 1.03 LA 1.04 ! MK 0.98 NL 1.69 OV 0.89 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00 HN 1.60 KP 0.98 ! LA 1.02 MK 1.00 NL 1.21 OV 0.91 ! PT 0.91 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.30 KP 0.99 LA 1.02 ! NL 1.04 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.96 KP 1.04 LA 1.04 ! MK 0.99 NL 1.64 OV 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 HN 1.38 KP 1.00 ! LA 1.00 MK 0.96 NL 1.23 OV 0.88 ! PT 0.94 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.48 KP 1.01 LA 1.02 ! NL 1.01 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.97 KP 1.02 LA 1.02 ! MK 0.99 NL 1.74 OV 0.89 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 1.41 KP 0.97 ! LA 1.03 MK 0.95 NL 1.23 OV 0.89 ! PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.32 KP 0.94 LA 1.01 ! NL 1.00 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.97 KP 1.05 LA 1.03 ! MK 0.97 NL 1.55 OV 0.89 ! ! ! Fit before self-cal, rms=0.088684Jy sigma=1.272012 ! Fit after self-cal, rms=0.109318Jy sigma=1.183874 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.911 mas, bmaj=2.463 mas, bpa=-1.419 degrees ! Estimated noise=0.233283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00450753 Jy ! Component: 100 - total flux cleaned = -0.00506285 Jy ! Component: 150 - total flux cleaned = -0.00562723 Jy ! Component: 200 - total flux cleaned = -0.00611729 Jy ! Total flux subtracted in 200 components = -0.00611729 Jy ! Clean residual min=-0.004515 max=0.003438 Jy/beam ! Clean residual mean=0.000003 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.268612 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 57 components and 0.268612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108943Jy sigma=1.176507 ! Fit after self-cal, rms=0.109292Jy sigma=1.174851 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109292Jy sigma=1.174851 ! Fit after self-cal, rms=0.111956Jy sigma=1.172641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9147 mas, bmaj=2.467 mas, bpa=-1.38 degrees ! Estimated noise=0.233965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00294427 Jy ! Component: 100 - total flux cleaned = -0.00316988 Jy ! Component: 150 - total flux cleaned = -0.00348466 Jy ! Component: 200 - total flux cleaned = -0.00370923 Jy ! Total flux subtracted in 200 components = -0.00370923 Jy ! Clean residual min=-0.004025 max=0.003175 Jy/beam ! Clean residual mean=0.000003 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.264902 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.264902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111815Jy sigma=1.170109 ! Fit after self-cal, rms=0.111795Jy sigma=1.169567 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124863 Jy ! Component: 100 - total flux cleaned = -0.00124465 Jy ! Component: 150 - total flux cleaned = -0.00124397 Jy ! Component: 200 - total flux cleaned = -0.00128168 Jy ! Total flux subtracted in 200 components = -0.00128168 Jy ! Clean residual min=-0.003744 max=0.003156 Jy/beam ! Clean residual mean=0.000004 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.263621 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.263621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111735Jy sigma=1.168540 ! Fit after self-cal, rms=0.111716Jy sigma=1.168271 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111716Jy sigma=1.168271 ! Fit after self-cal, rms=0.114456Jy sigma=1.167741 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9169 mas, bmaj=2.47 mas, bpa=-1.337 degrees ! Estimated noise=0.234401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177225 Jy ! Component: 100 - total flux cleaned = -0.00191866 Jy ! Component: 150 - total flux cleaned = -0.00213392 Jy ! Component: 200 - total flux cleaned = -0.0023234 Jy ! Total flux subtracted in 200 components = -0.0023234 Jy ! Clean residual min=-0.003187 max=0.002948 Jy/beam ! Clean residual mean=0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.261297 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 75 components and 0.261297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114388Jy sigma=1.166767 ! Fit after self-cal, rms=0.114400Jy sigma=1.166525 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180242 Jy ! Component: 100 - total flux cleaned = 0.00195097 Jy ! Component: 150 - total flux cleaned = 0.00183498 Jy ! Component: 200 - total flux cleaned = 0.00188604 Jy ! Total flux subtracted in 200 components = 0.00188604 Jy ! Clean residual min=-0.002458 max=0.001690 Jy/beam ! Clean residual mean=0.000002 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.263183 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 0.263183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114267Jy sigma=1.164669 ! Fit after self-cal, rms=0.114280Jy sigma=1.164516 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114280Jy sigma=1.164516 ! Fit after self-cal, rms=0.115789Jy sigma=1.164322 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=7.998 mas, bpa=2.175 degrees ! Estimated noise=0.270923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000763273 Jy ! Component: 100 - total flux cleaned = -0.000864784 Jy ! Component: 150 - total flux cleaned = -0.00104811 Jy ! Component: 200 - total flux cleaned = -0.00114042 Jy ! Total flux subtracted in 200 components = -0.00114042 Jy ! Clean residual min=-0.002480 max=0.001607 Jy/beam ! Clean residual mean=0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.262043 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 0.262043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115753Jy sigma=1.163974 ! Fit after self-cal, rms=0.115766Jy sigma=1.163817 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416098 Jy ! Component: 100 - total flux cleaned = -0.00033859 Jy ! Component: 150 - total flux cleaned = -0.00032079 Jy ! Component: 200 - total flux cleaned = -0.000304935 Jy ! Total flux subtracted in 200 components = -0.000304935 Jy ! Clean residual min=-0.002290 max=0.001561 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.261738 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 116 components and 0.261738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115753Jy sigma=1.163718 ! Fit after self-cal, rms=0.115753Jy sigma=1.163624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9184 mas, bmaj=2.473 mas, bpa=-1.321 degrees ! Estimated noise=0.234099 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9184 x 2.473 at -1.321 degrees (North through East) ! Clean map min=-0.0053737 max=0.17971 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6576 mas, bmaj=1.754 mas, bpa=-0.8114 degrees ! Estimated noise=0.609612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150862 Jy ! Component: 100 - total flux cleaned = 0.191719 Jy ! Component: 150 - total flux cleaned = 0.211875 Jy ! Component: 200 - total flux cleaned = 0.224191 Jy ! Total flux subtracted in 200 components = 0.224191 Jy ! Clean residual min=-0.006480 max=0.008118 Jy/beam ! Clean residual mean=0.000020 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.224191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.224191 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9184 mas, bmaj=2.473 mas, bpa=-1.321 degrees ! Estimated noise=0.234099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150942 Jy ! Component: 100 - total flux cleaned = 0.0235553 Jy ! Component: 150 - total flux cleaned = 0.0289522 Jy ! Component: 200 - total flux cleaned = 0.0326984 Jy ! Total flux subtracted in 200 components = 0.0326984 Jy ! Clean residual min=-0.002680 max=0.002850 Jy/beam ! Clean residual mean=0.000006 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.256889 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 0.256889 Jy ! Inverting map ! Added new window around map position (-1.8, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245552 Jy ! Component: 100 - total flux cleaned = 0.00344363 Jy ! Component: 150 - total flux cleaned = 0.00396759 Jy ! Component: 200 - total flux cleaned = 0.00435454 Jy ! Total flux subtracted in 200 components = 0.00435454 Jy ! Clean residual min=-0.002216 max=0.001805 Jy/beam ! Clean residual mean=0.000003 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.261244 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 86 components and 0.261244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=7.998 mas, bpa=2.175 degrees ! Estimated noise=0.270923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000903592 Jy ! Component: 100 - total flux cleaned = 0.000944819 Jy ! Component: 150 - total flux cleaned = 0.000980857 Jy ! Component: 200 - total flux cleaned = 0.00101227 Jy ! Total flux subtracted in 200 components = 0.00101227 Jy ! Clean residual min=-0.002161 max=0.001438 Jy/beam ! Clean residual mean=0.000003 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.262256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4748e-05 Jy ! Component: 100 - total flux cleaned = -0.000127348 Jy ! Component: 150 - total flux cleaned = -0.000172338 Jy ! Component: 200 - total flux cleaned = -0.000213453 Jy ! Total flux subtracted in 200 components = -0.000213453 Jy ! Clean residual min=-0.002003 max=0.001427 Jy/beam ! Clean residual mean=0.000003 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.262043 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 120 components and 0.262043 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9184 mas, bmaj=2.473 mas, bpa=-1.321 degrees ! Estimated noise=0.234099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109665 Jy ! Component: 100 - total flux cleaned = -0.000144842 Jy ! Component: 150 - total flux cleaned = -0.000177813 Jy ! Component: 200 - total flux cleaned = -0.00020882 Jy ! Total flux subtracted in 200 components = -0.00020882 Jy ! Clean residual min=-0.001716 max=0.001471 Jy/beam ! Clean residual mean=0.000002 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.261834 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.261834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115779Jy sigma=1.163119 ! Fit after self-cal, rms=0.115740Jy sigma=1.162754 wmodel J2313-3704_X_a_map.mod ! Writing 136 model components to file: J2313-3704_X_a_map.mod wobs J2313-3704_X_a_uvs.fits ! Writing UV FITS file: J2313-3704_X_a_uvs.fits wwins J2313-3704_X_a_map.win ! wwins: Wrote 6 windows to J2313-3704_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143789 Jy ! Component: 100 - total flux cleaned = -0.000250922 Jy ! Component: 150 - total flux cleaned = -0.000380019 Jy ! Component: 200 - total flux cleaned = -0.000527417 Jy ! Component: 250 - total flux cleaned = -0.000551439 Jy ! Component: 300 - total flux cleaned = -0.000551838 Jy ! Component: 350 - total flux cleaned = -0.000530185 Jy ! Component: 400 - total flux cleaned = -0.000573801 Jy ! Component: 450 - total flux cleaned = -0.000531398 Jy ! Component: 500 - total flux cleaned = -0.000468937 Jy ! Component: 550 - total flux cleaned = -0.000387247 Jy ! Component: 600 - total flux cleaned = -0.000267582 Jy ! Component: 650 - total flux cleaned = -0.000228316 Jy ! Component: 700 - total flux cleaned = -0.000132007 Jy ! Component: 750 - total flux cleaned = -5.61661e-05 Jy ! Component: 800 - total flux cleaned = -1.87101e-05 Jy ! Component: 850 - total flux cleaned = 5.49279e-05 Jy ! Component: 900 - total flux cleaned = 7.32226e-05 Jy ! Component: 950 - total flux cleaned = 0.000181434 Jy ! Component: 1000 - total flux cleaned = 0.000269647 Jy ! Component: 1050 - total flux cleaned = 0.00026942 Jy ! Component: 1100 - total flux cleaned = 0.000321535 Jy ! Component: 1150 - total flux cleaned = 0.000389695 Jy ! Component: 1200 - total flux cleaned = 0.000457304 Jy ! Component: 1250 - total flux cleaned = 0.000507539 Jy ! Component: 1300 - total flux cleaned = 0.00057346 Jy ! Component: 1350 - total flux cleaned = 0.000622492 Jy ! Component: 1400 - total flux cleaned = 0.000703343 Jy ! Component: 1450 - total flux cleaned = 0.000703525 Jy ! Component: 1500 - total flux cleaned = 0.000766997 Jy ! Component: 1550 - total flux cleaned = 0.000861115 Jy ! Component: 1600 - total flux cleaned = 0.000907361 Jy ! Component: 1650 - total flux cleaned = 0.000984188 Jy ! Component: 1700 - total flux cleaned = 0.0010298 Jy ! Component: 1750 - total flux cleaned = 0.00107474 Jy ! Component: 1800 - total flux cleaned = 0.00111968 Jy ! Component: 1850 - total flux cleaned = 0.00111972 Jy ! Component: 1900 - total flux cleaned = 0.00113442 Jy ! Component: 1950 - total flux cleaned = 0.00120729 Jy ! Component: 2000 - total flux cleaned = 0.00122163 Jy ! Component: 2050 - total flux cleaned = 0.00126458 Jy ! Component: 2100 - total flux cleaned = 0.00132162 Jy ! Component: 2150 - total flux cleaned = 0.0014062 Jy ! Component: 2200 - total flux cleaned = 0.00147623 Jy ! Component: 2250 - total flux cleaned = 0.00151786 Jy ! Component: 2300 - total flux cleaned = 0.00155937 Jy ! Component: 2350 - total flux cleaned = 0.00165513 Jy ! Component: 2400 - total flux cleaned = 0.00168235 Jy ! Component: 2450 - total flux cleaned = 0.00169588 Jy ! Component: 2500 - total flux cleaned = 0.00178959 Jy ! Component: 2550 - total flux cleaned = 0.00185612 Jy ! Component: 2600 - total flux cleaned = 0.00190888 Jy ! Component: 2650 - total flux cleaned = 0.00197456 Jy ! Component: 2700 - total flux cleaned = 0.00206597 Jy ! Component: 2750 - total flux cleaned = 0.00214376 Jy ! Component: 2800 - total flux cleaned = 0.00224659 Jy ! Component: 2850 - total flux cleaned = 0.00227222 Jy ! Component: 2900 - total flux cleaned = 0.00238651 Jy ! Component: 2950 - total flux cleaned = 0.00247487 Jy ! Component: 3000 - total flux cleaned = 0.0025376 Jy ! Component: 3050 - total flux cleaned = 0.0025876 Jy ! Component: 3100 - total flux cleaned = 0.00266196 Jy ! Component: 3150 - total flux cleaned = 0.00271137 Jy ! Component: 3200 - total flux cleaned = 0.0027727 Jy ! Component: 3250 - total flux cleaned = 0.00282141 Jy ! Component: 3300 - total flux cleaned = 0.00291837 Jy ! Component: 3350 - total flux cleaned = 0.00300265 Jy ! Component: 3400 - total flux cleaned = 0.0030505 Jy ! Component: 3450 - total flux cleaned = 0.00313385 Jy ! Component: 3500 - total flux cleaned = 0.00319303 Jy ! Component: 3550 - total flux cleaned = 0.00325211 Jy ! Component: 3600 - total flux cleaned = 0.00327547 Jy ! Component: 3650 - total flux cleaned = 0.00332219 Jy ! Component: 3700 - total flux cleaned = 0.00341498 Jy ! Component: 3750 - total flux cleaned = 0.00347269 Jy ! Component: 3800 - total flux cleaned = 0.00353019 Jy ! Component: 3850 - total flux cleaned = 0.0035759 Jy ! Component: 3900 - total flux cleaned = 0.00364404 Jy ! Component: 3950 - total flux cleaned = 0.00368938 Jy ! Component: 4000 - total flux cleaned = 0.00373445 Jy ! Component: 4050 - total flux cleaned = 0.00375688 Jy ! Total flux subtracted in 4096 components = 0.00377916 Jy ! Clean residual min=-0.000715 max=0.000634 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.265613 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 459 components and 0.265613 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2313-3704_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9184 x 2.473 at -1.321 degrees (North through East) ! Clean map min=-0.0027869 max=0.18137 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2313-3704_X_a_map.fits wmodel /vlbi/uf001/uvm//J2313-3704_X_a_map.mod ! Writing 459 model components to file: /vlbi/uf001/uvm//J2313-3704_X_a_map.mod wobs /vlbi/uf001/uvm//J2313-3704_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2313-3704_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2313-3704_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J2313-3704_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.181368 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201238 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332867 0.332867 0.665735 1.33147 2.66294 5.32588 10.6518 21.3035 42.607 85.214 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.181 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 901.259 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2313-3704_X_a_dfm.log closed on Sun Jan 13 22:43:30 2019