! Started logfile: /vlbi/uf001/uva//J2302+6405_X_dfm.log on Mon Jan 14 06:31:30 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2302+6405_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2302+6405_X_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.983908 visibilities/baseline/integration-bin.
! Found source: J2302+6405
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 61632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2302+6405_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010690Jy  sigma=23.811759
! Fit after  self-cal, rms=0.876460Jy  sigma=20.646679
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7491 mas, bmaj=0.9537 mas, bpa=3.244 degrees
! Estimated noise=0.293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0886487 Jy
! Component: 100  -  total flux cleaned = 0.113002 Jy
! Total flux subtracted in 100 components = 0.113002 Jy
! Clean residual min=-0.003761 max=0.010144 Jy/beam
! Clean residual mean=-0.000007 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.113002 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.113002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061031Jy  sigma=1.371508
! Fit after  self-cal, rms=0.061006Jy  sigma=1.370950
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116681 Jy
! Component: 100  -  total flux cleaned = 0.0187131 Jy
! Total flux subtracted in 100 components = 0.0187131 Jy
! Clean residual min=-0.003453 max=0.005579 Jy/beam
! Clean residual mean=-0.000005 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.131715 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.131715 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057286Jy  sigma=1.281437
! Fit after  self-cal, rms=0.057274Jy  sigma=1.281062
! Inverting map 
! Added new window around map position (0.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00556613 Jy
! Component: 100  -  total flux cleaned = 0.00902845 Jy
! Total flux subtracted in 100 components = 0.00902845 Jy
! Clean residual min=-0.003313 max=0.003992 Jy/beam
! Clean residual mean=-0.000004 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.140744 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.140744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056371Jy  sigma=1.260435
! Fit after  self-cal, rms=0.056333Jy  sigma=1.259479
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.233 mas, bpa=3.418 degrees
! Estimated noise=0.124675 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00555248 Jy
! Component: 100  -  total flux cleaned = 0.00922692 Jy
! Component: 150  -  total flux cleaned = 0.0119057 Jy
! Component: 200  -  total flux cleaned = 0.0139114 Jy
! Total flux subtracted in 200 components = 0.0139114 Jy
! Clean residual min=-0.002681 max=0.003749 Jy/beam
! Clean residual mean=-0.000009 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.154655 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 47 components and 0.154655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055639Jy  sigma=1.243722
! Fit after  self-cal, rms=0.055583Jy  sigma=1.242518
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 1.233 at 3.418 degrees (North through East)
! Clean map  min=-0.0024492  max=0.12144 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.01     MK        1.07     NL        1.11     OV        0.91     
!   PT        0.87     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        0.99     KP        1.01     
!   LA        1.00     MK        1.05     NL        1.14     OV        0.91     
!   PT        0.87     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.97     KP        1.03     
!   LA        0.99     MK        1.10     NL        1.12     OV        0.91     
!   PT        0.87     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        0.98     KP        1.03     
!   LA        1.01     MK        1.04     NL        1.12     OV        0.91     
!   PT        0.87     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        0.97     KP        1.03     
!   LA        1.01     MK        1.05     NL        1.11     OV        0.92     
!   PT        0.87     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.96     KP        1.04     
!   LA        1.01     MK        1.04     NL        1.11     OV        0.91     
!   PT        0.89     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.97     KP        1.03     
!   LA        1.00     MK        1.08     NL        1.13     OV        0.93     
!   PT        0.87     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        0.99     KP        1.04     
!   LA        1.02     MK        1.06     NL        1.12     OV        0.90     
!   PT        0.89     SC        0.96     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.95     KP        1.02     
!   LA        1.01     MK        1.06     NL        1.11     OV        0.91     
!   PT        0.88     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.99     HN        0.97     KP        1.02     
!   LA        1.01     MK        1.07     NL        1.11     OV        0.93     
!   PT        0.87     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.02     HN        0.95     KP        1.04     
!   LA        1.03     MK        1.09     NL        1.13     OV        0.90     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.99     HN        0.94     KP        1.05     
!   LA        1.00     MK        1.05     NL        1.12     OV        0.94     
!   PT        0.90     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.055583Jy  sigma=1.242518
! Fit after  self-cal, rms=0.053455Jy  sigma=1.205316
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.24 mas, bpa=4.459 degrees
! Estimated noise=0.124703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102281 Jy
! Component: 100  -  total flux cleaned = -0.00114383 Jy
! Component: 150  -  total flux cleaned = -0.00124358 Jy
! Component: 200  -  total flux cleaned = -0.00129922 Jy
! Total flux subtracted in 200 components = -0.00129922 Jy
! Clean residual min=-0.001086 max=0.000982 Jy/beam
! Clean residual mean=-0.000003 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.153356 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 0.153356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053401Jy  sigma=1.204108
! Fit after  self-cal, rms=0.053420Jy  sigma=1.203708
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053420Jy  sigma=1.203708
! Fit after  self-cal, rms=0.053285Jy  sigma=1.200294
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=1.237 mas, bpa=4.02 degrees
! Estimated noise=0.124713 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00036721 Jy
! Component: 100  -  total flux cleaned = -0.000670022 Jy
! Component: 150  -  total flux cleaned = -0.00076037 Jy
! Component: 200  -  total flux cleaned = -0.000818129 Jy
! Total flux subtracted in 200 components = -0.000818129 Jy
! Clean residual min=-0.000843 max=0.000810 Jy/beam
! Clean residual mean=0.000001 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.152538 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 0.152538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053260Jy  sigma=1.199770
! Fit after  self-cal, rms=0.053262Jy  sigma=1.199710
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129344 Jy
! Component: 100  -  total flux cleaned = -0.00021096 Jy
! Component: 150  -  total flux cleaned = -0.000285018 Jy
! Component: 200  -  total flux cleaned = -0.000339882 Jy
! Total flux subtracted in 200 components = -0.000339882 Jy
! Clean residual min=-0.000845 max=0.000773 Jy/beam
! Clean residual mean=0.000001 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.152198 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 0.152198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053252Jy  sigma=1.199523
! Fit after  self-cal, rms=0.053252Jy  sigma=1.199511
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053252Jy  sigma=1.199511
! Fit after  self-cal, rms=0.053209Jy  sigma=1.199361
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.007 mas, bmaj=1.234 mas, bpa=3.831 degrees
! Estimated noise=0.12474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155463 Jy
! Component: 100  -  total flux cleaned = -0.000284806 Jy
! Component: 150  -  total flux cleaned = -0.00034535 Jy
! Component: 200  -  total flux cleaned = -0.000372007 Jy
! Total flux subtracted in 200 components = -0.000372007 Jy
! Clean residual min=-0.000818 max=0.000731 Jy/beam
! Clean residual mean=0.000001 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.151826 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 83 components and 0.151826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053197Jy  sigma=1.199132
! Fit after  self-cal, rms=0.053197Jy  sigma=1.199115
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.24177e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001319 Jy
! Component: 150  -  total flux cleaned = -0.000143991 Jy
! Component: 200  -  total flux cleaned = -0.000166303 Jy
! Total flux subtracted in 200 components = -0.000166303 Jy
! Clean residual min=-0.000816 max=0.000712 Jy/beam
! Clean residual mean=0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.151659 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 85 components and 0.151659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053191Jy  sigma=1.199012
! Fit after  self-cal, rms=0.053191Jy  sigma=1.199005
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053191Jy  sigma=1.199005
! Fit after  self-cal, rms=0.053173Jy  sigma=1.198949
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=2.436 mas, bpa=27.79 degrees
! Estimated noise=0.161121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000193037 Jy
! Component: 100  -  total flux cleaned = -0.000236565 Jy
! Component: 150  -  total flux cleaned = -0.000245266 Jy
! Component: 200  -  total flux cleaned = -0.000253427 Jy
! Total flux subtracted in 200 components = -0.000253427 Jy
! Clean residual min=-0.000736 max=0.000778 Jy/beam
! Clean residual mean=0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.151406 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 92 components and 0.151406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053170Jy  sigma=1.198911
! Fit after  self-cal, rms=0.053169Jy  sigma=1.198897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.39441e-05 Jy
! Component: 100  -  total flux cleaned = -7.95995e-05 Jy
! Component: 150  -  total flux cleaned = -7.93921e-05 Jy
! Component: 200  -  total flux cleaned = -8.5649e-05 Jy
! Total flux subtracted in 200 components = -8.5649e-05 Jy
! Clean residual min=-0.000747 max=0.000772 Jy/beam
! Clean residual mean=0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.15132 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 95 components and 0.15132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053168Jy  sigma=1.198885
! Fit after  self-cal, rms=0.053168Jy  sigma=1.198877
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.232 mas, bpa=3.678 degrees
! Estimated noise=0.124778 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 1.232 at 3.678 degrees (North through East)
! Clean map  min=-0.00075657  max=0.12195 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7503 mas, bmaj=0.951 mas, bpa=3.623 degrees
! Estimated noise=0.294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0887618 Jy
! Component: 100  -  total flux cleaned = 0.113685 Jy
! Component: 150  -  total flux cleaned = 0.126225 Jy
! Component: 200  -  total flux cleaned = 0.133958 Jy
! Total flux subtracted in 200 components = 0.133958 Jy
! Clean residual min=-0.002099 max=0.004073 Jy/beam
! Clean residual mean=-0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.133958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.133958 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.232 mas, bpa=3.678 degrees
! Estimated noise=0.124778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00706656 Jy
! Component: 100  -  total flux cleaned = 0.0106615 Jy
! Component: 150  -  total flux cleaned = 0.012861 Jy
! Component: 200  -  total flux cleaned = 0.0143253 Jy
! Total flux subtracted in 200 components = 0.0143253 Jy
! Clean residual min=-0.000839 max=0.000976 Jy/beam
! Clean residual mean=-0.000000 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.148283 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.148283 Jy
! Inverting map 
! Added new window around map position (0.6, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107118 Jy
! Component: 100  -  total flux cleaned = 0.00183725 Jy
! Component: 150  -  total flux cleaned = 0.00227974 Jy
! Component: 200  -  total flux cleaned = 0.00248447 Jy
! Total flux subtracted in 200 components = 0.00248447 Jy
! Clean residual min=-0.000781 max=0.000685 Jy/beam
! Clean residual mean=0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.150768 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.150768 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=2.436 mas, bpa=27.79 degrees
! Estimated noise=0.161121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312963 Jy
! Component: 100  -  total flux cleaned = 0.000429094 Jy
! Component: 150  -  total flux cleaned = 0.00043456 Jy
! Component: 200  -  total flux cleaned = 0.000439681 Jy
! Total flux subtracted in 200 components = 0.000439681 Jy
! Clean residual min=-0.000775 max=0.000754 Jy/beam
! Clean residual mean=0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.151208 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.98025e-06 Jy
! Component: 100  -  total flux cleaned = 9.71624e-06 Jy
! Component: 150  -  total flux cleaned = 1.40371e-05 Jy
! Component: 200  -  total flux cleaned = 1.80779e-05 Jy
! Total flux subtracted in 200 components = 1.80779e-05 Jy
! Clean residual min=-0.000777 max=0.000749 Jy/beam
! Clean residual mean=0.000001 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.151226 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 69 components and 0.151226 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.006 mas, bmaj=1.232 mas, bpa=3.678 degrees
! Estimated noise=0.124778 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000148299 Jy
! Component: 100  -  total flux cleaned = -0.000135044 Jy
! Component: 150  -  total flux cleaned = -0.000108773 Jy
! Component: 200  -  total flux cleaned = -8.33129e-05 Jy
! Total flux subtracted in 200 components = -8.33129e-05 Jy
! Clean residual min=-0.000757 max=0.000684 Jy/beam
! Clean residual mean=0.000001 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.151142 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 0.151142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053172Jy  sigma=1.198970
! Fit after  self-cal, rms=0.053169Jy  sigma=1.198901
wmodel J2302+6405_X_map.mod
! Writing 80 model components to file: J2302+6405_X_map.mod
wobs   J2302+6405_X_uvs.fits
! Writing UV FITS file: J2302+6405_X_uvs.fits
wwins  J2302+6405_X_map.win
! wwins: Wrote 4 windows to J2302+6405_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000239293 Jy
! Component: 100  -  total flux cleaned = -0.000313706 Jy
! Component: 150  -  total flux cleaned = -0.000360824 Jy
! Component: 200  -  total flux cleaned = -0.000383566 Jy
! Component: 250  -  total flux cleaned = -0.00036144 Jy
! Component: 300  -  total flux cleaned = -0.00032915 Jy
! Component: 350  -  total flux cleaned = -0.000297444 Jy
! Component: 400  -  total flux cleaned = -0.000256163 Jy
! Component: 450  -  total flux cleaned = -0.000235907 Jy
! Component: 500  -  total flux cleaned = -0.000216005 Jy
! Component: 550  -  total flux cleaned = -0.000176908 Jy
! Component: 600  -  total flux cleaned = -0.000196385 Jy
! Component: 650  -  total flux cleaned = -0.000158316 Jy
! Component: 700  -  total flux cleaned = -0.000130299 Jy
! Component: 750  -  total flux cleaned = -0.000102625 Jy
! Component: 800  -  total flux cleaned = -9.35566e-05 Jy
! Component: 850  -  total flux cleaned = -8.45956e-05 Jy
! Component: 900  -  total flux cleaned = -8.45705e-05 Jy
! Component: 950  -  total flux cleaned = -7.556e-05 Jy
! Component: 1000  -  total flux cleaned = -3.16761e-05 Jy
! Component: 1050  -  total flux cleaned = -3.16856e-05 Jy
! Component: 1100  -  total flux cleaned = 2.85309e-05 Jy
! Component: 1150  -  total flux cleaned = 1.99805e-05 Jy
! Component: 1200  -  total flux cleaned = 4.54369e-05 Jy
! Component: 1250  -  total flux cleaned = 5.37418e-05 Jy
! Component: 1300  -  total flux cleaned = 8.6971e-05 Jy
! Component: 1350  -  total flux cleaned = 0.000136437 Jy
! Component: 1400  -  total flux cleaned = 0.000128246 Jy
! Component: 1450  -  total flux cleaned = 0.000136412 Jy
! Component: 1500  -  total flux cleaned = 0.000128416 Jy
! Component: 1550  -  total flux cleaned = 0.00017653 Jy
! Component: 1600  -  total flux cleaned = 0.000176547 Jy
! Component: 1650  -  total flux cleaned = 0.000192178 Jy
! Component: 1700  -  total flux cleaned = 0.000184346 Jy
! Component: 1750  -  total flux cleaned = 0.000184396 Jy
! Component: 1800  -  total flux cleaned = 0.000176701 Jy
! Component: 1850  -  total flux cleaned = 0.000169016 Jy
! Component: 1900  -  total flux cleaned = 0.000176581 Jy
! Component: 1950  -  total flux cleaned = 0.000138587 Jy
! Component: 2000  -  total flux cleaned = 0.000123529 Jy
! Component: 2050  -  total flux cleaned = 0.000138527 Jy
! Component: 2100  -  total flux cleaned = 0.000116072 Jy
! Component: 2150  -  total flux cleaned = 0.000116103 Jy
! Component: 2200  -  total flux cleaned = 7.1876e-05 Jy
! Component: 2250  -  total flux cleaned = 5.7249e-05 Jy
! Component: 2300  -  total flux cleaned = 8.63785e-05 Jy
! Component: 2350  -  total flux cleaned = 6.47135e-05 Jy
! Component: 2400  -  total flux cleaned = 5.03206e-05 Jy
! Component: 2450  -  total flux cleaned = 4.31381e-05 Jy
! Component: 2500  -  total flux cleaned = 5.74285e-05 Jy
! Component: 2550  -  total flux cleaned = 1.47909e-05 Jy
! Component: 2600  -  total flux cleaned = 1.47723e-05 Jy
! Component: 2650  -  total flux cleaned = 2.17911e-05 Jy
! Component: 2700  -  total flux cleaned = 2.17275e-05 Jy
! Component: 2750  -  total flux cleaned = -6.12906e-06 Jy
! Component: 2800  -  total flux cleaned = -2.00365e-05 Jy
! Component: 2850  -  total flux cleaned = -6.19353e-06 Jy
! Component: 2900  -  total flux cleaned = 7.14692e-07 Jy
! Component: 2950  -  total flux cleaned = -3.34907e-05 Jy
! Component: 3000  -  total flux cleaned = -2.66913e-05 Jy
! Component: 3050  -  total flux cleaned = -1.31046e-05 Jy
! Component: 3100  -  total flux cleaned = -4.01049e-05 Jy
! Component: 3150  -  total flux cleaned = -3.33829e-05 Jy
! Component: 3200  -  total flux cleaned = -4.67925e-05 Jy
! Component: 3250  -  total flux cleaned = -4.00858e-05 Jy
! Component: 3300  -  total flux cleaned = -7.99661e-05 Jy
! Component: 3350  -  total flux cleaned = -7.33338e-05 Jy
! Component: 3400  -  total flux cleaned = -6.67544e-05 Jy
! Component: 3450  -  total flux cleaned = -0.000106112 Jy
! Component: 3500  -  total flux cleaned = -8.64835e-05 Jy
! Component: 3550  -  total flux cleaned = -9.9489e-05 Jy
! Component: 3600  -  total flux cleaned = -9.95292e-05 Jy
! Component: 3650  -  total flux cleaned = -9.3104e-05 Jy
! Component: 3700  -  total flux cleaned = -0.000105958 Jy
! Component: 3750  -  total flux cleaned = -0.000144344 Jy
! Component: 3800  -  total flux cleaned = -0.000125146 Jy
! Component: 3850  -  total flux cleaned = -0.000144181 Jy
! Component: 3900  -  total flux cleaned = -0.000118864 Jy
! Component: 3950  -  total flux cleaned = -0.000131445 Jy
! Component: 4000  -  total flux cleaned = -0.000150312 Jy
! Component: 4050  -  total flux cleaned = -0.00014403 Jy
! Total flux subtracted in 4096 components = -0.000144035 Jy
! Clean residual min=-0.000367 max=0.000399 Jy/beam
! Clean residual mean=0.000000 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.150998 Jy
keep
! Adding 335 model components to the UV plane model.
! The established model now contains 415 components and 0.150998 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2302+6405_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.006 x 1.232 at 3.678 degrees (North through East)
! Clean map  min=-0.00058891  max=0.12217 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2302+6405_X_map.fits
wmodel /vlbi/uf001/uva//J2302+6405_X_map.mod
! Writing 415 model components to file: /vlbi/uf001/uva//J2302+6405_X_map.mod
wobs   /vlbi/uf001/uva//J2302+6405_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2302+6405_X_uvs.fits
wwins  /vlbi/uf001/uva//J2302+6405_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2302+6405_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122171 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000105251 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.258451 0.258451 0.516903 1.03381 2.06761 4.13522 8.27044 16.5409 33.0818 66.1635
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1160.76 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2302+6405_X_dfm.log closed on Mon Jan 14 06:31:37 2019