! Started logfile: /vlbi/uf001/uva//J2302+6405_S_dfm.log on Mon Jan 14 06:31:24 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2302+6405_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2302+6405_S_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.983908 visibilities/baseline/integration-bin.
! Found source: J2302+6405
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 15408 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2302+6405_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011405Jy  sigma=22.183021
! Fit after  self-cal, rms=0.890364Jy  sigma=19.502988
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.123 mas, bmaj=3.918 mas, bpa=-0.7937 degrees
! Estimated noise=0.389646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0777779 Jy
! Component: 100  -  total flux cleaned = 0.107682 Jy
! Total flux subtracted in 100 components = 0.107682 Jy
! Clean residual min=-0.004550 max=0.014481 Jy/beam
! Clean residual mean=-0.000066 rms=0.001337 Jy/beam
! Combined flux in latest and established models = 0.107682 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.107682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067375Jy  sigma=1.423199
! Fit after  self-cal, rms=0.067212Jy  sigma=1.419710
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176293 Jy
! Component: 100  -  total flux cleaned = 0.0290317 Jy
! Total flux subtracted in 100 components = 0.0290317 Jy
! Clean residual min=-0.003358 max=0.006338 Jy/beam
! Clean residual mean=-0.000035 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.136713 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 0.136713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060250Jy  sigma=1.262796
! Fit after  self-cal, rms=0.060221Jy  sigma=1.262199
! Inverting map 
! Added new window around map position (-3.5, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00795223 Jy
! Component: 100  -  total flux cleaned = 0.0134319 Jy
! Total flux subtracted in 100 components = 0.0134319 Jy
! Clean residual min=-0.003004 max=0.003489 Jy/beam
! Clean residual mean=-0.000020 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.150145 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 47 components and 0.150145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058662Jy  sigma=1.227982
! Fit after  self-cal, rms=0.058646Jy  sigma=1.227612
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.798 mas, bmaj=4.724 mas, bpa=1.646 degrees
! Estimated noise=0.268496 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00559543 Jy
! Component: 100  -  total flux cleaned = 0.00927231 Jy
! Component: 150  -  total flux cleaned = 0.0119843 Jy
! Component: 200  -  total flux cleaned = 0.0140665 Jy
! Total flux subtracted in 200 components = 0.0140665 Jy
! Clean residual min=-0.001807 max=0.002172 Jy/beam
! Clean residual mean=-0.000007 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.164212 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 86 components and 0.164212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057981Jy  sigma=1.213274
! Fit after  self-cal, rms=0.057970Jy  sigma=1.213139
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.798 x 4.724 at 1.646 degrees (North through East)
! Clean map  min=-0.0017413  max=0.105 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.00     KP        1.01     
!   LA        0.93     MK        1.04     NL        1.06     OV        0.98     
!   PT        0.95     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.99     KP        1.01     
!   LA        0.95     MK        1.04     NL        1.04     OV        0.98     
!   PT        0.94     SC        1.07     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.96     MK        1.01     NL        1.02     OV        0.97     
!   PT        0.97     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.057970Jy  sigma=1.213139
! Fit after  self-cal, rms=0.058033Jy  sigma=1.206276
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.841 mas, bmaj=4.775 mas, bpa=1.284 degrees
! Estimated noise=0.269031 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (71, 64).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187391 Jy
! Component: 100  -  total flux cleaned = 0.00277826 Jy
! Component: 150  -  total flux cleaned = 0.00303041 Jy
! Component: 200  -  total flux cleaned = 0.00321123 Jy
! Total flux subtracted in 200 components = 0.00321123 Jy
! Clean residual min=-0.001538 max=0.001547 Jy/beam
! Clean residual mean=0.000009 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.167423 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 109 components and 0.167423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057956Jy  sigma=1.204617
! Fit after  self-cal, rms=0.057955Jy  sigma=1.204440
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057955Jy  sigma=1.204440
! Fit after  self-cal, rms=0.057930Jy  sigma=1.198894
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.84 mas, bmaj=4.791 mas, bpa=1.641 degrees
! Estimated noise=0.268722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014945 Jy
! Component: 100  -  total flux cleaned = 0.000148671 Jy
! Component: 150  -  total flux cleaned = 0.000148364 Jy
! Component: 200  -  total flux cleaned = 0.000128009 Jy
! Total flux subtracted in 200 components = 0.000128009 Jy
! Clean residual min=-0.001292 max=0.001234 Jy/beam
! Clean residual mean=0.000011 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.167551 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 124 components and 0.167551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057913Jy  sigma=1.198522
! Fit after  self-cal, rms=0.057920Jy  sigma=1.198434
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.01598e-05 Jy
! Component: 100  -  total flux cleaned = 9.72593e-05 Jy
! Component: 150  -  total flux cleaned = 9.62753e-05 Jy
! Component: 200  -  total flux cleaned = 8.10422e-05 Jy
! Total flux subtracted in 200 components = 8.10422e-05 Jy
! Clean residual min=-0.001300 max=0.001193 Jy/beam
! Clean residual mean=0.000010 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.167632 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 131 components and 0.167632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057911Jy  sigma=1.198256
! Fit after  self-cal, rms=0.057910Jy  sigma=1.198255
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057910Jy  sigma=1.198255
! Fit after  self-cal, rms=0.057859Jy  sigma=1.198217
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.837 mas, bmaj=4.791 mas, bpa=1.522 degrees
! Estimated noise=0.268432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000150213 Jy
! Component: 100  -  total flux cleaned = -0.000165356 Jy
! Component: 150  -  total flux cleaned = -0.00016551 Jy
! Component: 200  -  total flux cleaned = -0.000165515 Jy
! Total flux subtracted in 200 components = -0.000165515 Jy
! Clean residual min=-0.001311 max=0.001175 Jy/beam
! Clean residual mean=0.000010 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.167466 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 136 components and 0.167466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057852Jy  sigma=1.198076
! Fit after  self-cal, rms=0.057852Jy  sigma=1.198075
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.62397e-05 Jy
! Component: 100  -  total flux cleaned = 2.63149e-05 Jy
! Component: 150  -  total flux cleaned = 3.81866e-05 Jy
! Component: 200  -  total flux cleaned = 3.80588e-05 Jy
! Total flux subtracted in 200 components = 3.80588e-05 Jy
! Clean residual min=-0.001319 max=0.001166 Jy/beam
! Clean residual mean=0.000010 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.167504 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 141 components and 0.167505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057847Jy  sigma=1.197982
! Fit after  self-cal, rms=0.057847Jy  sigma=1.197980
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057847Jy  sigma=1.197980
! Fit after  self-cal, rms=0.057825Jy  sigma=1.197971
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.039 mas, bmaj=8.602 mas, bpa=14.09 degrees
! Estimated noise=0.340107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632 Jy
! Component: 100  -  total flux cleaned = 0.000866267 Jy
! Component: 150  -  total flux cleaned = 0.000904372 Jy
! Component: 200  -  total flux cleaned = 0.000894414 Jy
! Total flux subtracted in 200 components = 0.000894414 Jy
! Clean residual min=-0.001253 max=0.001249 Jy/beam
! Clean residual mean=0.000022 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.168399 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 149 components and 0.168399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057825Jy  sigma=1.198010
! Fit after  self-cal, rms=0.057825Jy  sigma=1.197985
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224473 Jy
! Component: 100  -  total flux cleaned = 0.000262866 Jy
! Component: 150  -  total flux cleaned = 0.000279602 Jy
! Component: 200  -  total flux cleaned = 0.000295135 Jy
! Total flux subtracted in 200 components = 0.000295135 Jy
! Clean residual min=-0.001219 max=0.001242 Jy/beam
! Clean residual mean=0.000021 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.168694 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 159 components and 0.168694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057827Jy  sigma=1.198024
! Fit after  self-cal, rms=0.057827Jy  sigma=1.198022
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=4.792 mas, bpa=1.439 degrees
! Estimated noise=0.268333 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.836 x 4.792 at 1.439 degrees (North through East)
! Clean map  min=-0.0012315  max=0.10501 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=3.971 mas, bpa=-0.9652 degrees
! Estimated noise=0.392667 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.078116 Jy
! Component: 100  -  total flux cleaned = 0.107968 Jy
! Component: 150  -  total flux cleaned = 0.125044 Jy
! Component: 200  -  total flux cleaned = 0.136085 Jy
! Total flux subtracted in 200 components = 0.136085 Jy
! Clean residual min=-0.003043 max=0.005943 Jy/beam
! Clean residual mean=-0.000023 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.136085 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.136085 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=4.792 mas, bpa=1.439 degrees
! Estimated noise=0.268333 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00983737 Jy
! Component: 100  -  total flux cleaned = 0.0154044 Jy
! Component: 150  -  total flux cleaned = 0.0188081 Jy
! Component: 200  -  total flux cleaned = 0.021213 Jy
! Total flux subtracted in 200 components = 0.021213 Jy
! Clean residual min=-0.001551 max=0.001721 Jy/beam
! Clean residual mean=0.000003 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.157298 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 74 components and 0.157298 Jy
! Inverting map 
! Added new window around map position (-8, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196704 Jy
! Component: 100  -  total flux cleaned = 0.00355499 Jy
! Component: 150  -  total flux cleaned = 0.00490766 Jy
! Component: 200  -  total flux cleaned = 0.00598185 Jy
! Total flux subtracted in 200 components = 0.00598185 Jy
! Clean residual min=-0.001416 max=0.001353 Jy/beam
! Clean residual mean=0.000007 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.16328 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 98 components and 0.16328 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.039 mas, bmaj=8.602 mas, bpa=14.09 degrees
! Estimated noise=0.340107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168317 Jy
! Component: 100  -  total flux cleaned = 0.00278363 Jy
! Component: 150  -  total flux cleaned = 0.00342207 Jy
! Component: 200  -  total flux cleaned = 0.00391171 Jy
! Total flux subtracted in 200 components = 0.00391171 Jy
! Clean residual min=-0.001282 max=0.001194 Jy/beam
! Clean residual mean=0.000019 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.167192 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381962 Jy
! Component: 100  -  total flux cleaned = 0.000717189 Jy
! Component: 150  -  total flux cleaned = 0.000980309 Jy
! Component: 200  -  total flux cleaned = 0.00120124 Jy
! Total flux subtracted in 200 components = 0.00120124 Jy
! Clean residual min=-0.001225 max=0.001212 Jy/beam
! Clean residual mean=0.000020 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.168393 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 157 components and 0.168393 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.836 mas, bmaj=4.792 mas, bpa=1.439 degrees
! Estimated noise=0.268333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000483214 Jy
! Component: 100  -  total flux cleaned = -0.000539767 Jy
! Component: 150  -  total flux cleaned = -0.000564448 Jy
! Component: 200  -  total flux cleaned = -0.000494665 Jy
! Total flux subtracted in 200 components = -0.000494665 Jy
! Clean residual min=-0.001304 max=0.001092 Jy/beam
! Clean residual mean=0.000009 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.167899 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 173 components and 0.167899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057855Jy  sigma=1.198444
! Fit after  self-cal, rms=0.057851Jy  sigma=1.198363
wmodel J2302+6405_S_map.mod
! Writing 173 model components to file: J2302+6405_S_map.mod
wobs   J2302+6405_S_uvs.fits
! Writing UV FITS file: J2302+6405_S_uvs.fits
wwins  J2302+6405_S_map.win
! wwins: Wrote 5 windows to J2302+6405_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000557334 Jy
! Component: 100  -  total flux cleaned = -0.000661195 Jy
! Component: 150  -  total flux cleaned = -0.000641285 Jy
! Component: 200  -  total flux cleaned = -0.000716776 Jy
! Component: 250  -  total flux cleaned = -0.000734675 Jy
! Component: 300  -  total flux cleaned = -0.00082374 Jy
! Component: 350  -  total flux cleaned = -0.000858649 Jy
! Component: 400  -  total flux cleaned = -0.000875478 Jy
! Component: 450  -  total flux cleaned = -0.00087542 Jy
! Component: 500  -  total flux cleaned = -0.000875463 Jy
! Component: 550  -  total flux cleaned = -0.000875137 Jy
! Component: 600  -  total flux cleaned = -0.00084318 Jy
! Component: 650  -  total flux cleaned = -0.00088991 Jy
! Component: 700  -  total flux cleaned = -0.00092052 Jy
! Component: 750  -  total flux cleaned = -0.000950867 Jy
! Component: 800  -  total flux cleaned = -0.000981095 Jy
! Component: 850  -  total flux cleaned = -0.0010109 Jy
! Component: 900  -  total flux cleaned = -0.00105527 Jy
! Component: 950  -  total flux cleaned = -0.00112816 Jy
! Component: 1000  -  total flux cleaned = -0.00118603 Jy
! Component: 1050  -  total flux cleaned = -0.00125725 Jy
! Component: 1100  -  total flux cleaned = -0.0012432 Jy
! Component: 1150  -  total flux cleaned = -0.00135517 Jy
! Component: 1200  -  total flux cleaned = -0.00142457 Jy
! Component: 1250  -  total flux cleaned = -0.00141076 Jy
! Component: 1300  -  total flux cleaned = -0.00149266 Jy
! Component: 1350  -  total flux cleaned = -0.00154674 Jy
! Component: 1400  -  total flux cleaned = -0.00161399 Jy
! Component: 1450  -  total flux cleaned = -0.00162743 Jy
! Component: 1500  -  total flux cleaned = -0.00171985 Jy
! Component: 1550  -  total flux cleaned = -0.00177238 Jy
! Component: 1600  -  total flux cleaned = -0.00181132 Jy
! Component: 1650  -  total flux cleaned = -0.00185025 Jy
! Component: 1700  -  total flux cleaned = -0.00190168 Jy
! Component: 1750  -  total flux cleaned = -0.00197811 Jy
! Component: 1800  -  total flux cleaned = -0.00197805 Jy
! Component: 1850  -  total flux cleaned = -0.00206596 Jy
! Component: 1900  -  total flux cleaned = -0.00210323 Jy
! Component: 1950  -  total flux cleaned = -0.00210316 Jy
! Component: 2000  -  total flux cleaned = -0.0021155 Jy
! Component: 2050  -  total flux cleaned = -0.0021034 Jy
! Component: 2100  -  total flux cleaned = -0.002152 Jy
! Component: 2150  -  total flux cleaned = -0.0021641 Jy
! Component: 2200  -  total flux cleaned = -0.00219999 Jy
! Component: 2250  -  total flux cleaned = -0.00218812 Jy
! Component: 2300  -  total flux cleaned = -0.00216445 Jy
! Component: 2350  -  total flux cleaned = -0.00223501 Jy
! Component: 2400  -  total flux cleaned = -0.00222333 Jy
! Component: 2450  -  total flux cleaned = -0.00221171 Jy
! Component: 2500  -  total flux cleaned = -0.00223481 Jy
! Component: 2550  -  total flux cleaned = -0.00224627 Jy
! Component: 2600  -  total flux cleaned = -0.00225764 Jy
! Component: 2650  -  total flux cleaned = -0.00226896 Jy
! Component: 2700  -  total flux cleaned = -0.00224637 Jy
! Component: 2750  -  total flux cleaned = -0.00225752 Jy
! Component: 2800  -  total flux cleaned = -0.00230196 Jy
! Component: 2850  -  total flux cleaned = -0.00227978 Jy
! Component: 2900  -  total flux cleaned = -0.00225779 Jy
! Component: 2950  -  total flux cleaned = -0.00227975 Jy
! Component: 3000  -  total flux cleaned = -0.0022797 Jy
! Component: 3050  -  total flux cleaned = -0.00232296 Jy
! Component: 3100  -  total flux cleaned = -0.00230147 Jy
! Component: 3150  -  total flux cleaned = -0.0022586 Jy
! Component: 3200  -  total flux cleaned = -0.00224793 Jy
! Component: 3250  -  total flux cleaned = -0.00221617 Jy
! Component: 3300  -  total flux cleaned = -0.00220571 Jy
! Component: 3350  -  total flux cleaned = -0.00221613 Jy
! Component: 3400  -  total flux cleaned = -0.00218488 Jy
! Component: 3450  -  total flux cleaned = -0.00226812 Jy
! Component: 3500  -  total flux cleaned = -0.00218542 Jy
! Component: 3550  -  total flux cleaned = -0.00219582 Jy
! Component: 3600  -  total flux cleaned = -0.00218558 Jy
! Component: 3650  -  total flux cleaned = -0.00224672 Jy
! Component: 3700  -  total flux cleaned = -0.00217571 Jy
! Component: 3750  -  total flux cleaned = -0.00223634 Jy
! Component: 3800  -  total flux cleaned = -0.00217615 Jy
! Component: 3850  -  total flux cleaned = -0.00219616 Jy
! Component: 3900  -  total flux cleaned = -0.00220618 Jy
! Component: 3950  -  total flux cleaned = -0.00217642 Jy
! Component: 4000  -  total flux cleaned = -0.00218634 Jy
! Component: 4050  -  total flux cleaned = -0.00219615 Jy
! Total flux subtracted in 4096 components = -0.00224505 Jy
! Clean residual min=-0.000590 max=0.000677 Jy/beam
! Clean residual mean=0.000006 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.165654 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 483 components and 0.165653 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2302+6405_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.836 x 4.792 at 1.439 degrees (North through East)
! Clean map  min=-0.001074  max=0.10524 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2302+6405_S_map.fits
wmodel /vlbi/uf001/uva//J2302+6405_S_map.mod
! Writing 483 model components to file: /vlbi/uf001/uva//J2302+6405_S_map.mod
wobs   /vlbi/uf001/uva//J2302+6405_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2302+6405_S_uvs.fits
wwins  /vlbi/uf001/uva//J2302+6405_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2302+6405_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.105235 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000175887 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.501412 0.501412 1.00282 2.00565 4.01129 8.02259 16.0452 32.0903 64.1807
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.105 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  598.31 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2302+6405_S_dfm.log closed on Mon Jan 14 06:31:29 2019