! Started logfile: /vlbi/uf001/uva//J2301-0158_X_dfm.log on Mon Jan 14 06:31:17 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2301-0158_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2301-0158_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.957505 visibilities/baseline/integration-bin. ! Found source: J2301-0158 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 29472 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2301-0158_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.345084Jy sigma=21.849354 ! Fit after self-cal, rms=0.176539Jy sigma=2.976333 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6531 mas, bmaj=1.673 mas, bpa=-2.14 degrees ! Estimated noise=0.404543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.666974 Jy ! Component: 100 - total flux cleaned = 0.819066 Jy ! Total flux subtracted in 100 components = 0.819066 Jy ! Clean residual min=-0.033778 max=0.055327 Jy/beam ! Clean residual mean=0.000037 rms=0.005137 Jy/beam ! Combined flux in latest and established models = 0.819066 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.819066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166308Jy sigma=2.657534 ! Fit after self-cal, rms=0.166292Jy sigma=2.657233 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0564569 Jy ! Component: 100 - total flux cleaned = 0.0829396 Jy ! Total flux subtracted in 100 components = 0.0829396 Jy ! Clean residual min=-0.026995 max=0.033100 Jy/beam ! Clean residual mean=0.000013 rms=0.004190 Jy/beam ! Combined flux in latest and established models = 0.902006 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 18 components and 0.902006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132029Jy sigma=2.132322 ! Fit after self-cal, rms=0.131963Jy sigma=2.131374 ! Inverting map ! Added new window around map position (-1.8, -4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283708 Jy ! Component: 100 - total flux cleaned = 0.0399893 Jy ! Total flux subtracted in 100 components = 0.0399893 Jy ! Clean residual min=-0.024071 max=0.030954 Jy/beam ! Clean residual mean=0.000013 rms=0.003910 Jy/beam ! Combined flux in latest and established models = 0.941995 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.941995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122489Jy sigma=1.981024 ! Fit after self-cal, rms=0.121826Jy sigma=1.970301 ! Inverting map ! Added new window around map position (-1.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268857 Jy ! Component: 100 - total flux cleaned = 0.0435441 Jy ! Total flux subtracted in 100 components = 0.0435441 Jy ! Clean residual min=-0.022938 max=0.024143 Jy/beam ! Clean residual mean=0.000003 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.985539 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.985539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110686Jy sigma=1.789412 ! Fit after self-cal, rms=0.110018Jy sigma=1.777835 ! Inverting map ! Added new window around map position (1.8, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202725 Jy ! Component: 100 - total flux cleaned = 0.0299614 Jy ! Total flux subtracted in 100 components = 0.0299614 Jy ! Clean residual min=-0.022196 max=0.016947 Jy/beam ! Clean residual mean=0.000002 rms=0.003241 Jy/beam ! Combined flux in latest and established models = 1.0155 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 1.0155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103284Jy sigma=1.666238 ! Fit after self-cal, rms=0.102936Jy sigma=1.660639 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8132 mas, bmaj=1.968 mas, bpa=-2.28 degrees ! Estimated noise=0.273201 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251651 Jy ! Component: 100 - total flux cleaned = 0.0428074 Jy ! Component: 150 - total flux cleaned = 0.0564659 Jy ! Component: 200 - total flux cleaned = 0.0673874 Jy ! Total flux subtracted in 200 components = 0.0673874 Jy ! Clean residual min=-0.026670 max=0.018060 Jy/beam ! Clean residual mean=-0.000011 rms=0.004220 Jy/beam ! Combined flux in latest and established models = 1.08289 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 72 components and 1.08289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094285Jy sigma=1.522784 ! Fit after self-cal, rms=0.093956Jy sigma=1.517220 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8132 x 1.968 at -2.28 degrees (North through East) ! Clean map min=-0.026376 max=0.87115 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 0.99 KP 1.03 ! LA 1.02 MK 1.04 NL 1.07 OV 0.96 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 0.99 KP 1.04 ! LA 1.01 MK 1.02 NL 1.09 OV 0.96 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.00 KP 1.04 ! LA 1.01 MK 1.02 NL 1.06 OV 0.94 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 0.98 KP 1.03 ! LA 1.01 MK 1.01 NL 1.07 OV 0.96 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 0.99 KP 1.04 ! LA 1.01 MK 1.01 NL 1.07 OV 0.95 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 0.98 KP 1.04 ! LA 1.01 MK 1.01 NL 1.07 OV 0.96 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 0.98 KP 1.03 ! LA 1.00 MK 1.02 NL 1.06 OV 0.95 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.99 KP 1.03 ! LA 1.01 MK 1.02 NL 1.08 OV 0.94 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.98 KP 1.02 ! LA 1.00 MK 1.01 NL 1.06 OV 0.95 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.98 KP 1.02 ! LA 1.00 MK 1.03 NL 1.06 OV 0.94 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.98 KP 1.02 ! LA 1.00 MK 1.01 NL 1.07 OV 0.95 ! PT 0.88 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.97 KP 1.03 ! LA 0.99 MK 1.01 NL 1.07 OV 0.95 ! PT 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.093956Jy sigma=1.517220 ! Fit after self-cal, rms=0.067380Jy sigma=1.069714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8163 mas, bmaj=1.984 mas, bpa=-2.188 degrees ! Estimated noise=0.273991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0121974 Jy ! Component: 100 - total flux cleaned = -0.0163364 Jy ! Component: 150 - total flux cleaned = -0.0185184 Jy ! Component: 200 - total flux cleaned = -0.0197259 Jy ! Total flux subtracted in 200 components = -0.0197259 Jy ! Clean residual min=-0.008720 max=0.008978 Jy/beam ! Clean residual mean=0.000001 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 1.06316 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 1.06316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064315Jy sigma=1.019323 ! Fit after self-cal, rms=0.064195Jy sigma=1.016985 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064195Jy sigma=1.016985 ! Fit after self-cal, rms=0.062255Jy sigma=0.986842 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8155 mas, bmaj=1.985 mas, bpa=-2.121 degrees ! Estimated noise=0.273993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00629799 Jy ! Component: 100 - total flux cleaned = -0.00907703 Jy ! Component: 150 - total flux cleaned = -0.0107696 Jy ! Component: 200 - total flux cleaned = -0.0115962 Jy ! Total flux subtracted in 200 components = -0.0115962 Jy ! Clean residual min=-0.007536 max=0.007346 Jy/beam ! Clean residual mean=0.000007 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 1.05157 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 90 components and 1.05157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060617Jy sigma=0.959613 ! Fit after self-cal, rms=0.060540Jy sigma=0.958230 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480645 Jy ! Component: 100 - total flux cleaned = 0.00373114 Jy ! Component: 150 - total flux cleaned = 0.00276707 Jy ! Component: 200 - total flux cleaned = 0.00189826 Jy ! Total flux subtracted in 200 components = 0.00189826 Jy ! Clean residual min=-0.007025 max=0.006564 Jy/beam ! Clean residual mean=0.000006 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 1.05346 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 101 components and 1.05346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059476Jy sigma=0.940482 ! Fit after self-cal, rms=0.059408Jy sigma=0.939190 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059408Jy sigma=0.939190 ! Fit after self-cal, rms=0.058681Jy sigma=0.929016 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=1.984 mas, bpa=-2.051 degrees ! Estimated noise=0.273979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00365074 Jy ! Component: 100 - total flux cleaned = -0.00506546 Jy ! Component: 150 - total flux cleaned = -0.00593426 Jy ! Component: 200 - total flux cleaned = -0.00632308 Jy ! Total flux subtracted in 200 components = -0.00632308 Jy ! Clean residual min=-0.006138 max=0.005584 Jy/beam ! Clean residual mean=0.000004 rms=0.000936 Jy/beam ! Combined flux in latest and established models = 1.04714 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 1.04714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057720Jy sigma=0.913232 ! Fit after self-cal, rms=0.057678Jy sigma=0.912437 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.72048e-05 Jy ! Component: 100 - total flux cleaned = -0.000566355 Jy ! Component: 150 - total flux cleaned = -0.00110219 Jy ! Component: 200 - total flux cleaned = -0.00130267 Jy ! Total flux subtracted in 200 components = -0.00130267 Jy ! Clean residual min=-0.005701 max=0.005092 Jy/beam ! Clean residual mean=0.000004 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 1.04584 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 1.04584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057261Jy sigma=0.906130 ! Fit after self-cal, rms=0.057245Jy sigma=0.905746 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057245Jy sigma=0.905746 ! Fit after self-cal, rms=0.056839Jy sigma=0.901370 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.043 mas, bmaj=3.398 mas, bpa=-1.573 degrees ! Estimated noise=0.371116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00465943 Jy ! Component: 100 - total flux cleaned = -0.00545629 Jy ! Component: 150 - total flux cleaned = -0.00567434 Jy ! Component: 200 - total flux cleaned = -0.00593584 Jy ! Total flux subtracted in 200 components = -0.00593584 Jy ! Clean residual min=-0.005902 max=0.004262 Jy/beam ! Clean residual mean=0.000006 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 1.0399 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 1.0399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056573Jy sigma=0.897789 ! Fit after self-cal, rms=0.056561Jy sigma=0.897558 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06473e-05 Jy ! Component: 100 - total flux cleaned = -0.000317093 Jy ! Component: 150 - total flux cleaned = -0.000488641 Jy ! Component: 200 - total flux cleaned = -0.000590555 Jy ! Total flux subtracted in 200 components = -0.000590555 Jy ! Clean residual min=-0.005550 max=0.004214 Jy/beam ! Clean residual mean=0.000005 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 1.03931 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 1.03931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056515Jy sigma=0.897066 ! Fit after self-cal, rms=0.056515Jy sigma=0.897014 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8137 mas, bmaj=1.984 mas, bpa=-2.002 degrees ! Estimated noise=0.273757 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8137 x 1.984 at -2.002 degrees (North through East) ! Clean map min=-0.0044859 max=0.87487 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056515Jy sigma=0.897014 ! Fit after self-cal, rms=0.053671Jy sigma=0.838074 ! Inverting map and beam ! Estimated beam: bmin=0.8134 mas, bmaj=1.985 mas, bpa=-2.031 degrees ! Estimated noise=0.273986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021573 Jy ! Component: 100 - total flux cleaned = -0.0034576 Jy ! Component: 150 - total flux cleaned = -0.00385522 Jy ! Component: 200 - total flux cleaned = -0.00385532 Jy ! Total flux subtracted in 200 components = -0.00385532 Jy ! Clean residual min=-0.004451 max=0.004104 Jy/beam ! Clean residual mean=0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 1.03546 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 148 components and 1.03546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053201Jy sigma=0.830461 ! Fit after self-cal, rms=0.053174Jy sigma=0.829918 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268879 Jy ! Component: 100 - total flux cleaned = -0.000351821 Jy ! Component: 150 - total flux cleaned = -0.000136424 Jy ! Component: 200 - total flux cleaned = -2.05147e-06 Jy ! Total flux subtracted in 200 components = -2.05147e-06 Jy ! Clean residual min=-0.004144 max=0.003977 Jy/beam ! Clean residual mean=0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 1.03546 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 155 components and 1.03546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052959Jy sigma=0.826616 ! Fit after self-cal, rms=0.052950Jy sigma=0.826384 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052950Jy sigma=0.826384 ! Fit after self-cal, rms=0.052740Jy sigma=0.824433 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6508 mas, bmaj=1.682 mas, bpa=-1.847 degrees ! Estimated noise=0.409415 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.674921 Jy ! Component: 100 - total flux cleaned = 0.828263 Jy ! Component: 150 - total flux cleaned = 0.886859 Jy ! Component: 200 - total flux cleaned = 0.918744 Jy ! Total flux subtracted in 200 components = 0.918744 Jy ! Clean residual min=-0.009595 max=0.017039 Jy/beam ! Clean residual mean=0.000026 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.918744 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.918744 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8131 mas, bmaj=1.985 mas, bpa=-1.995 degrees ! Estimated noise=0.273781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0354034 Jy ! Component: 100 - total flux cleaned = 0.0566888 Jy ! Component: 150 - total flux cleaned = 0.0711055 Jy ! Component: 200 - total flux cleaned = 0.0818424 Jy ! Total flux subtracted in 200 components = 0.0818424 Jy ! Clean residual min=-0.004510 max=0.007389 Jy/beam ! Clean residual mean=0.000008 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 1.00059 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 49 components and 1.00059 Jy ! Inverting map ! Added new window around map position (0.6, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843578 Jy ! Component: 100 - total flux cleaned = 0.0149068 Jy ! Component: 150 - total flux cleaned = 0.0190753 Jy ! Component: 200 - total flux cleaned = 0.0219936 Jy ! Total flux subtracted in 200 components = 0.0219936 Jy ! Clean residual min=-0.003435 max=0.004355 Jy/beam ! Clean residual mean=0.000005 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 1.02258 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 1.02258 Jy ! Inverting map ! Added new window around map position (-2.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003638 Jy ! Component: 100 - total flux cleaned = 0.00581077 Jy ! Component: 150 - total flux cleaned = 0.00722202 Jy ! Component: 200 - total flux cleaned = 0.00837309 Jy ! Total flux subtracted in 200 components = 0.00837309 Jy ! Clean residual min=-0.003123 max=0.003801 Jy/beam ! Clean residual mean=0.000003 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 1.03095 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 1.03095 Jy ! Inverting map ! Added new window around map position (2.4, 16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209322 Jy ! Component: 100 - total flux cleaned = 0.00341797 Jy ! Component: 150 - total flux cleaned = 0.00426485 Jy ! Component: 200 - total flux cleaned = 0.00468033 Jy ! Total flux subtracted in 200 components = 0.00468033 Jy ! Clean residual min=-0.002926 max=0.002389 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 1.03563 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 108 components and 1.03563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.044 mas, bmaj=3.401 mas, bpa=-1.537 degrees ! Estimated noise=0.371262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171526 Jy ! Component: 100 - total flux cleaned = 0.00200295 Jy ! Component: 150 - total flux cleaned = 0.00215401 Jy ! Component: 200 - total flux cleaned = 0.0021982 Jy ! Total flux subtracted in 200 components = 0.0021982 Jy ! Clean residual min=-0.003957 max=0.002840 Jy/beam ! Clean residual mean=0.000000 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.03783 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.89843e-05 Jy ! Component: 100 - total flux cleaned = 0.000114904 Jy ! Component: 150 - total flux cleaned = 0.000115821 Jy ! Component: 200 - total flux cleaned = 8.45938e-05 Jy ! Total flux subtracted in 200 components = 8.45938e-05 Jy ! Clean residual min=-0.003922 max=0.002758 Jy/beam ! Clean residual mean=-0.000000 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 1.03792 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 138 components and 1.03792 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8131 mas, bmaj=1.985 mas, bpa=-1.995 degrees ! Estimated noise=0.273781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481263 Jy ! Component: 100 - total flux cleaned = 0.000654753 Jy ! Component: 150 - total flux cleaned = 0.000859222 Jy ! Component: 200 - total flux cleaned = 0.00109754 Jy ! Total flux subtracted in 200 components = 0.00109754 Jy ! Clean residual min=-0.002696 max=0.002202 Jy/beam ! Clean residual mean=-0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 1.03901 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 1.03901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051597Jy sigma=0.807505 ! Fit after self-cal, rms=0.051514Jy sigma=0.806141 wmodel J2301-0158_X_map.mod ! Writing 157 model components to file: J2301-0158_X_map.mod wobs J2301-0158_X_uvs.fits ! Writing UV FITS file: J2301-0158_X_uvs.fits wwins J2301-0158_X_map.win ! wwins: Wrote 8 windows to J2301-0158_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119375 Jy ! Component: 100 - total flux cleaned = -0.00168094 Jy ! Component: 150 - total flux cleaned = -0.00153356 Jy ! Component: 200 - total flux cleaned = -0.00128542 Jy ! Component: 250 - total flux cleaned = -0.00101365 Jy ! Component: 300 - total flux cleaned = -0.000752394 Jy ! Component: 350 - total flux cleaned = -0.000499281 Jy ! Component: 400 - total flux cleaned = -0.000314963 Jy ! Component: 450 - total flux cleaned = -0.000135436 Jy ! Component: 500 - total flux cleaned = 3.81135e-05 Jy ! Component: 550 - total flux cleaned = 0.000179093 Jy ! Component: 600 - total flux cleaned = 0.000261279 Jy ! Component: 650 - total flux cleaned = 0.000288143 Jy ! Component: 700 - total flux cleaned = 0.000313896 Jy ! Component: 750 - total flux cleaned = 0.00028826 Jy ! Component: 800 - total flux cleaned = 0.000212593 Jy ! Component: 850 - total flux cleaned = 0.000212437 Jy ! Component: 900 - total flux cleaned = 0.0001388 Jy ! Component: 950 - total flux cleaned = 0.000163154 Jy ! Component: 1000 - total flux cleaned = 6.82001e-05 Jy ! Component: 1050 - total flux cleaned = -1.54839e-06 Jy ! Component: 1100 - total flux cleaned = -9.2833e-05 Jy ! Component: 1150 - total flux cleaned = -0.000160616 Jy ! Component: 1200 - total flux cleaned = -0.000205313 Jy ! Component: 1250 - total flux cleaned = -0.000358205 Jy ! Component: 1300 - total flux cleaned = -0.0004447 Jy ! Component: 1350 - total flux cleaned = -0.000487112 Jy ! Component: 1400 - total flux cleaned = -0.000550414 Jy ! Component: 1450 - total flux cleaned = -0.000654151 Jy ! Component: 1500 - total flux cleaned = -0.000694878 Jy ! Component: 1550 - total flux cleaned = -0.000755296 Jy ! Component: 1600 - total flux cleaned = -0.000755287 Jy ! Component: 1650 - total flux cleaned = -0.000676868 Jy ! Component: 1700 - total flux cleaned = -0.000793748 Jy ! Component: 1750 - total flux cleaned = -0.000793228 Jy ! Component: 1800 - total flux cleaned = -0.000812213 Jy ! Component: 1850 - total flux cleaned = -0.000774892 Jy ! Component: 1900 - total flux cleaned = -0.000812341 Jy ! Component: 1950 - total flux cleaned = -0.000848443 Jy ! Component: 2000 - total flux cleaned = -0.000829934 Jy ! Component: 2050 - total flux cleaned = -0.000883687 Jy ! Component: 2100 - total flux cleaned = -0.000883506 Jy ! Component: 2150 - total flux cleaned = -0.000883261 Jy ! Component: 2200 - total flux cleaned = -0.000848819 Jy ! Component: 2250 - total flux cleaned = -0.000848698 Jy ! Component: 2300 - total flux cleaned = -0.000798166 Jy ! Component: 2350 - total flux cleaned = -0.000831853 Jy ! Component: 2400 - total flux cleaned = -0.000815398 Jy ! Component: 2450 - total flux cleaned = -0.000798994 Jy ! Component: 2500 - total flux cleaned = -0.000734007 Jy ! Component: 2550 - total flux cleaned = -0.000733886 Jy ! Component: 2600 - total flux cleaned = -0.000702042 Jy ! Component: 2650 - total flux cleaned = -0.000639094 Jy ! Component: 2700 - total flux cleaned = -0.000701614 Jy ! Component: 2750 - total flux cleaned = -0.000593634 Jy ! Component: 2800 - total flux cleaned = -0.0006547 Jy ! Component: 2850 - total flux cleaned = -0.000609328 Jy ! Component: 2900 - total flux cleaned = -0.000594263 Jy ! Component: 2950 - total flux cleaned = -0.000564275 Jy ! Component: 3000 - total flux cleaned = -0.000593795 Jy ! Component: 3050 - total flux cleaned = -0.000549948 Jy ! Component: 3100 - total flux cleaned = -0.000564467 Jy ! Component: 3150 - total flux cleaned = -0.000564455 Jy ! Component: 3200 - total flux cleaned = -0.000578722 Jy ! Component: 3250 - total flux cleaned = -0.000621085 Jy ! Component: 3300 - total flux cleaned = -0.000593149 Jy ! Component: 3350 - total flux cleaned = -0.000593097 Jy ! Component: 3400 - total flux cleaned = -0.000634286 Jy ! Component: 3450 - total flux cleaned = -0.000647797 Jy ! Component: 3500 - total flux cleaned = -0.000593496 Jy ! Component: 3550 - total flux cleaned = -0.000526526 Jy ! Component: 3600 - total flux cleaned = -0.000566308 Jy ! Component: 3650 - total flux cleaned = -0.00050024 Jy ! Component: 3700 - total flux cleaned = -0.000487024 Jy ! Component: 3750 - total flux cleaned = -0.00042228 Jy ! Component: 3800 - total flux cleaned = -0.000435004 Jy ! Component: 3850 - total flux cleaned = -0.000383788 Jy ! Component: 3900 - total flux cleaned = -0.000409287 Jy ! Component: 3950 - total flux cleaned = -0.000346274 Jy ! Component: 4000 - total flux cleaned = -0.00034639 Jy ! Component: 4050 - total flux cleaned = -0.00040845 Jy ! Total flux subtracted in 4096 components = -0.000359031 Jy ! Clean residual min=-0.000687 max=0.000732 Jy/beam ! Clean residual mean=-0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 1.03865 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 473 components and 1.03865 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2301-0158_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8131 x 1.985 at -1.995 degrees (North through East) ! Clean map min=-0.0025023 max=0.87941 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2301-0158_X_map.fits wmodel /vlbi/uf001/uva//J2301-0158_X_map.mod ! Writing 473 model components to file: /vlbi/uf001/uva//J2301-0158_X_map.mod wobs /vlbi/uf001/uva//J2301-0158_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2301-0158_X_uvs.fits wwins /vlbi/uf001/uva//J2301-0158_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J2301-0158_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.879409 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214913 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0733149 0.0733149 0.14663 0.29326 0.586519 1.17304 2.34608 4.69215 9.38431 18.7686 37.5372 75.0745 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.879 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4091.94 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2301-0158_X_dfm.log closed on Mon Jan 14 06:31:23 2019