! Started logfile: /vlbi/uf001/uvm//J2248-3235_S_b_dfm.log on Sun Jan 13 22:40:59 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J2248-3235_S_b_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J2248-3235_S_b_uvm.fits
! AN table 1: 21 integrations on 36 of 36 possible baselines.
! AN table 2: 9 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.673016 visibilities/baseline/integration-bin.
! Found source: J2248-3235
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1908 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2248-3235_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 107 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 107 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 107 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.076674Jy  sigma=13.879790
! Fit after  self-cal, rms=0.591846Jy  sigma=7.115832
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=8.984 mas, bpa=0.9407 degrees
! Estimated noise=2.18907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.325943 Jy
! Component: 100  -  total flux cleaned = 0.402193 Jy
! Total flux subtracted in 100 components = 0.402193 Jy
! Clean residual min=-0.027300 max=0.058520 Jy/beam
! Clean residual mean=0.000094 rms=0.008442 Jy/beam
! Combined flux in latest and established models = 0.402193 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.402193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.167598Jy  sigma=2.071408
! Fit after  self-cal, rms=0.167590Jy  sigma=2.071231
! Inverting map 
! Added new window around map position (-3.5, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0521789 Jy
! Component: 100  -  total flux cleaned = 0.083151 Jy
! Total flux subtracted in 100 components = 0.083151 Jy
! Clean residual min=-0.023796 max=0.044119 Jy/beam
! Clean residual mean=0.000046 rms=0.006704 Jy/beam
! Combined flux in latest and established models = 0.485344 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 24 components and 0.485344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143985Jy  sigma=1.695255
! Fit after  self-cal, rms=0.142733Jy  sigma=1.672016
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.533 mas, bmaj=12.26 mas, bpa=0.3059 degrees
! Estimated noise=1.62848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365301 Jy
! Component: 100  -  total flux cleaned = 0.0554588 Jy
! Component: 150  -  total flux cleaned = 0.065873 Jy
! Component: 200  -  total flux cleaned = 0.0688501 Jy
! Total flux subtracted in 200 components = 0.0688501 Jy
! Clean residual min=-0.019144 max=0.026963 Jy/beam
! Clean residual mean=-0.000025 rms=0.005701 Jy/beam
! Combined flux in latest and established models = 0.554194 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 37 components and 0.554194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.135119Jy  sigma=1.521152
! Fit after  self-cal, rms=0.134487Jy  sigma=1.507647
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.533 x 12.26 at 0.3059 degrees (North through East)
! Clean map  min=-0.018983  max=0.39257 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        1.28     KP        1.00     LA        0.92     
!   MK        1.02     NL        1.16     OV        0.92     PT        0.95     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     HN        1.35     KP        1.03     LA        0.97     
!   NL        1.15     OV        0.93     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.40     HN        1.34     KP        1.01     LA        0.97     
!   MK        0.96     NL        1.13     OV        0.75     PT        0.97     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.93     HN        1.31     KP        1.04     LA        0.95     
!   NL        1.12     OV        0.88     PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     HN        1.24     KP        1.00     LA        0.91     
!   MK        0.98     NL        1.12     OV        0.87     PT        1.01     
!   SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     HN        1.56     KP        1.05     LA        0.97     
!   NL        1.15     OV        0.87     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.134487Jy  sigma=1.507647
! Fit after  self-cal, rms=0.133110Jy  sigma=1.235299
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.556 mas, bmaj=12.16 mas, bpa=0.4359 degrees
! Estimated noise=1.6609 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00493296 Jy
! Component: 100  -  total flux cleaned = -0.00625938 Jy
! Component: 150  -  total flux cleaned = -0.00708656 Jy
! Component: 200  -  total flux cleaned = -0.00759555 Jy
! Total flux subtracted in 200 components = -0.00759555 Jy
! Clean residual min=-0.010984 max=0.012471 Jy/beam
! Clean residual mean=-0.000010 rms=0.002769 Jy/beam
! Combined flux in latest and established models = 0.546599 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.546599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131714Jy  sigma=1.224346
! Fit after  self-cal, rms=0.132067Jy  sigma=1.222613
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132067Jy  sigma=1.222613
! Fit after  self-cal, rms=0.139499Jy  sigma=1.190040
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.572 mas, bmaj=12.19 mas, bpa=0.5172 degrees
! Estimated noise=1.67086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000329883 Jy
! Component: 100  -  total flux cleaned = -0.000814529 Jy
! Component: 150  -  total flux cleaned = -0.00108769 Jy
! Component: 200  -  total flux cleaned = -0.00133147 Jy
! Total flux subtracted in 200 components = -0.00133147 Jy
! Clean residual min=-0.009621 max=0.010415 Jy/beam
! Clean residual mean=-0.000008 rms=0.002438 Jy/beam
! Combined flux in latest and established models = 0.545267 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.545267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.139088Jy  sigma=1.185436
! Fit after  self-cal, rms=0.139165Jy  sigma=1.184909
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13.5, -64).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00861462 Jy
! Component: 100  -  total flux cleaned = 0.0103388 Jy
! Component: 150  -  total flux cleaned = 0.0104841 Jy
! Component: 200  -  total flux cleaned = 0.0103589 Jy
! Total flux subtracted in 200 components = 0.0103589 Jy
! Clean residual min=-0.008677 max=0.008314 Jy/beam
! Clean residual mean=0.000008 rms=0.002227 Jy/beam
! Combined flux in latest and established models = 0.555626 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 77 components and 0.555626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138364Jy  sigma=1.174859
! Fit after  self-cal, rms=0.138329Jy  sigma=1.173678
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.138329Jy  sigma=1.173678
! Fit after  self-cal, rms=0.158273Jy  sigma=1.141199
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.582 mas, bmaj=12.26 mas, bpa=0.5909 degrees
! Estimated noise=1.67252 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488913 Jy
! Component: 100  -  total flux cleaned = 0.00021732 Jy
! Component: 150  -  total flux cleaned = -2.95262e-05 Jy
! Component: 200  -  total flux cleaned = -0.000476187 Jy
! Total flux subtracted in 200 components = -0.000476187 Jy
! Clean residual min=-0.007397 max=0.007132 Jy/beam
! Clean residual mean=0.000026 rms=0.001885 Jy/beam
! Combined flux in latest and established models = 0.55515 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.55515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157990Jy  sigma=1.137111
! Fit after  self-cal, rms=0.158035Jy  sigma=1.136838
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.70462e-05 Jy
! Component: 100  -  total flux cleaned = -3.98696e-05 Jy
! Component: 150  -  total flux cleaned = -0.000331401 Jy
! Component: 200  -  total flux cleaned = -0.000514105 Jy
! Total flux subtracted in 200 components = -0.000514105 Jy
! Clean residual min=-0.007199 max=0.007108 Jy/beam
! Clean residual mean=0.000026 rms=0.001864 Jy/beam
! Combined flux in latest and established models = 0.554636 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 100 components and 0.554636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157844Jy  sigma=1.134890
! Fit after  self-cal, rms=0.157882Jy  sigma=1.134714
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157882Jy  sigma=1.134714
! Fit after  self-cal, rms=0.159119Jy  sigma=1.134061
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.2 mas, bmaj=29.74 mas, bpa=-0.2702 degrees
! Estimated noise=1.91831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000906515 Jy
! Component: 100  -  total flux cleaned = 0.000716798 Jy
! Component: 150  -  total flux cleaned = 0.000571451 Jy
! Component: 200  -  total flux cleaned = 0.000527086 Jy
! Total flux subtracted in 200 components = 0.000527086 Jy
! Clean residual min=-0.007098 max=0.006377 Jy/beam
! Clean residual mean=0.000041 rms=0.001989 Jy/beam
! Combined flux in latest and established models = 0.555163 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 113 components and 0.555163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.159084Jy  sigma=1.133401
! Fit after  self-cal, rms=0.159069Jy  sigma=1.133331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214347 Jy
! Component: 100  -  total flux cleaned = 0.000169416 Jy
! Component: 150  -  total flux cleaned = 0.000128138 Jy
! Component: 200  -  total flux cleaned = 0.000129863 Jy
! Total flux subtracted in 200 components = 0.000129863 Jy
! Clean residual min=-0.007067 max=0.006319 Jy/beam
! Clean residual mean=0.000042 rms=0.001980 Jy/beam
! Combined flux in latest and established models = 0.555293 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.555293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.159042Jy  sigma=1.132991
! Fit after  self-cal, rms=0.159041Jy  sigma=1.132973
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=12.27 mas, bpa=0.6208 degrees
! Estimated noise=1.67147 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.588 x 12.27 at 0.6208 degrees (North through East)
! Clean map  min=-0.0069381  max=0.40101 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.728 mas, bmaj=9.003 mas, bpa=1.341 degrees
! Estimated noise=2.28311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.33826 Jy
! Component: 100  -  total flux cleaned = 0.424034 Jy
! Component: 150  -  total flux cleaned = 0.461649 Jy
! Component: 200  -  total flux cleaned = 0.484139 Jy
! Total flux subtracted in 200 components = 0.484139 Jy
! Clean residual min=-0.012389 max=0.016657 Jy/beam
! Clean residual mean=0.000037 rms=0.003221 Jy/beam
! Combined flux in latest and established models = 0.484139 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.484139 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=12.27 mas, bpa=0.6208 degrees
! Estimated noise=1.67147 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260292 Jy
! Component: 100  -  total flux cleaned = 0.040249 Jy
! Component: 150  -  total flux cleaned = 0.0499982 Jy
! Component: 200  -  total flux cleaned = 0.0570709 Jy
! Total flux subtracted in 200 components = 0.0570709 Jy
! Clean residual min=-0.007488 max=0.007112 Jy/beam
! Clean residual mean=0.000013 rms=0.002045 Jy/beam
! Combined flux in latest and established models = 0.54121 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 80 components and 0.54121 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.2 mas, bmaj=29.74 mas, bpa=-0.2702 degrees
! Estimated noise=1.91831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00686402 Jy
! Component: 100  -  total flux cleaned = 0.0109059 Jy
! Component: 150  -  total flux cleaned = 0.0125853 Jy
! Component: 200  -  total flux cleaned = 0.0129434 Jy
! Total flux subtracted in 200 components = 0.0129434 Jy
! Clean residual min=-0.007752 max=0.006258 Jy/beam
! Clean residual mean=0.000037 rms=0.002034 Jy/beam
! Combined flux in latest and established models = 0.554153 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000233587 Jy
! Component: 100  -  total flux cleaned = 0.000510534 Jy
! Component: 150  -  total flux cleaned = 0.00063352 Jy
! Component: 200  -  total flux cleaned = 0.000689302 Jy
! Total flux subtracted in 200 components = 0.000689302 Jy
! Clean residual min=-0.007534 max=0.006022 Jy/beam
! Clean residual mean=0.000041 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.554843 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 120 components and 0.554843 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.588 mas, bmaj=12.27 mas, bpa=0.6208 degrees
! Estimated noise=1.67147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00190737 Jy
! Component: 100  -  total flux cleaned = -0.00202426 Jy
! Component: 150  -  total flux cleaned = -0.00191783 Jy
! Component: 200  -  total flux cleaned = -0.00182267 Jy
! Total flux subtracted in 200 components = -0.00182267 Jy
! Clean residual min=-0.006946 max=0.006660 Jy/beam
! Clean residual mean=0.000026 rms=0.001796 Jy/beam
! Combined flux in latest and established models = 0.55302 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 139 components and 0.55302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.158723Jy  sigma=1.128822
! Fit after  self-cal, rms=0.158722Jy  sigma=1.127986
wmodel J2248-3235_S_b_map.mod
! Writing 139 model components to file: J2248-3235_S_b_map.mod
wobs   J2248-3235_S_b_uvs.fits
! Writing UV FITS file: J2248-3235_S_b_uvs.fits
wwins  J2248-3235_S_b_map.win
! wwins: Wrote 4 windows to J2248-3235_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00206338 Jy
! Component: 100  -  total flux cleaned = -0.00299304 Jy
! Component: 150  -  total flux cleaned = -0.00385008 Jy
! Component: 200  -  total flux cleaned = -0.00456855 Jy
! Component: 250  -  total flux cleaned = -0.00526278 Jy
! Component: 300  -  total flux cleaned = -0.00564999 Jy
! Component: 350  -  total flux cleaned = -0.00630841 Jy
! Component: 400  -  total flux cleaned = -0.00630868 Jy
! Component: 450  -  total flux cleaned = -0.00612906 Jy
! Component: 500  -  total flux cleaned = -0.00569002 Jy
! Component: 550  -  total flux cleaned = -0.00543011 Jy
! Component: 600  -  total flux cleaned = -0.00509051 Jy
! Component: 650  -  total flux cleaned = -0.00475852 Jy
! Component: 700  -  total flux cleaned = -0.0045955 Jy
! Component: 750  -  total flux cleaned = -0.00443509 Jy
! Component: 800  -  total flux cleaned = -0.00411842 Jy
! Component: 850  -  total flux cleaned = -0.00404049 Jy
! Component: 900  -  total flux cleaned = -0.00388669 Jy
! Component: 950  -  total flux cleaned = -0.00366035 Jy
! Component: 1000  -  total flux cleaned = -0.00351207 Jy
! Component: 1050  -  total flux cleaned = -0.00343931 Jy
! Component: 1100  -  total flux cleaned = -0.00307895 Jy
! Component: 1150  -  total flux cleaned = -0.00293724 Jy
! Component: 1200  -  total flux cleaned = -0.00293657 Jy
! Component: 1250  -  total flux cleaned = -0.00252158 Jy
! Component: 1300  -  total flux cleaned = -0.0025914 Jy
! Component: 1350  -  total flux cleaned = -0.0025225 Jy
! Component: 1400  -  total flux cleaned = -0.00219071 Jy
! Component: 1450  -  total flux cleaned = -0.00225583 Jy
! Component: 1500  -  total flux cleaned = -0.00219022 Jy
! Component: 1550  -  total flux cleaned = -0.00199766 Jy
! Component: 1600  -  total flux cleaned = -0.00180817 Jy
! Component: 1650  -  total flux cleaned = -0.00168244 Jy
! Component: 1700  -  total flux cleaned = -0.00137196 Jy
! Component: 1750  -  total flux cleaned = -0.00124906 Jy
! Component: 1800  -  total flux cleaned = -0.00118826 Jy
! Component: 1850  -  total flux cleaned = -0.000765565 Jy
! Component: 1900  -  total flux cleaned = -0.000526912 Jy
! Component: 1950  -  total flux cleaned = -0.000290592 Jy
! Component: 2000  -  total flux cleaned = -5.61439e-05 Jy
! Component: 2050  -  total flux cleaned = 0.000292639 Jy
! Component: 2100  -  total flux cleaned = 0.000579732 Jy
! Component: 2150  -  total flux cleaned = 0.0009208 Jy
! Component: 2200  -  total flux cleaned = 0.001147 Jy
! Component: 2250  -  total flux cleaned = 0.00148252 Jy
! Component: 2300  -  total flux cleaned = 0.00170507 Jy
! Component: 2350  -  total flux cleaned = 0.00203499 Jy
! Component: 2400  -  total flux cleaned = 0.00214451 Jy
! Component: 2450  -  total flux cleaned = 0.00247046 Jy
! Component: 2500  -  total flux cleaned = 0.00290001 Jy
! Component: 2550  -  total flux cleaned = 0.00321938 Jy
! Component: 2600  -  total flux cleaned = 0.00337825 Jy
! Component: 2650  -  total flux cleaned = 0.00379747 Jy
! Component: 2700  -  total flux cleaned = 0.00405716 Jy
! Component: 2750  -  total flux cleaned = 0.00431484 Jy
! Component: 2800  -  total flux cleaned = 0.00467232 Jy
! Component: 2850  -  total flux cleaned = 0.00477426 Jy
! Component: 2900  -  total flux cleaned = 0.00502645 Jy
! Component: 2950  -  total flux cleaned = 0.00517653 Jy
! Component: 3000  -  total flux cleaned = 0.00532561 Jy
! Component: 3050  -  total flux cleaned = 0.00547395 Jy
! Component: 3100  -  total flux cleaned = 0.00562072 Jy
! Component: 3150  -  total flux cleaned = 0.00596178 Jy
! Component: 3200  -  total flux cleaned = 0.00605841 Jy
! Component: 3250  -  total flux cleaned = 0.00654002 Jy
! Component: 3300  -  total flux cleaned = 0.00653997 Jy
! Component: 3350  -  total flux cleaned = 0.00673094 Jy
! Component: 3400  -  total flux cleaned = 0.0069671 Jy
! Component: 3450  -  total flux cleaned = 0.00724919 Jy
! Component: 3500  -  total flux cleaned = 0.0072962 Jy
! Component: 3550  -  total flux cleaned = 0.00766793 Jy
! Component: 3600  -  total flux cleaned = 0.00766743 Jy
! Component: 3650  -  total flux cleaned = 0.00794307 Jy
! Component: 3700  -  total flux cleaned = 0.00812578 Jy
! Component: 3750  -  total flux cleaned = 0.00821696 Jy
! Component: 3800  -  total flux cleaned = 0.00848769 Jy
! Component: 3850  -  total flux cleaned = 0.00862229 Jy
! Component: 3900  -  total flux cleaned = 0.00875614 Jy
! Component: 3950  -  total flux cleaned = 0.00880026 Jy
! Component: 4000  -  total flux cleaned = 0.00897715 Jy
! Component: 4050  -  total flux cleaned = 0.009109 Jy
! Total flux subtracted in 4096 components = 0.00937105 Jy
! Clean residual min=-0.002496 max=0.002355 Jy/beam
! Clean residual mean=0.000008 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.562391 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 418 components and 0.562391 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J2248-3235_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.588 x 12.27 at 0.6208 degrees (North through East)
! Clean map  min=-0.0076831  max=0.40614 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J2248-3235_S_b_map.fits
wmodel /vlbi/uf001/uvm//J2248-3235_S_b_map.mod
! Writing 418 model components to file: /vlbi/uf001/uvm//J2248-3235_S_b_map.mod
wobs   /vlbi/uf001/uvm//J2248-3235_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J2248-3235_S_b_uvs.fits
wwins  /vlbi/uf001/uvm//J2248-3235_S_b_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uvm//J2248-3235_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.406136 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000803172 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.593278 0.593278 1.18656 2.37311 4.74623 9.49245 18.9849 37.9698 75.9396
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.406 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  505.664 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J2248-3235_S_b_dfm.log closed on Sun Jan 13 22:41:03 2019