! Started logfile: /vlbi/uf001/uva//J2239-2153_S_dfm.log on Mon Jan 14 06:20:55 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2239-2153_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2239-2153_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J2239-2153 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 6480 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2239-2153_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=1.004555Jy sigma=17.389979 ! Fit after self-cal, rms=0.937895Jy sigma=16.240471 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=6.782 mas, bpa=-3.302 degrees ! Estimated noise=0.658108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495843 Jy ! Component: 100 - total flux cleaned = 0.0614858 Jy ! Total flux subtracted in 100 components = 0.0614858 Jy ! Clean residual min=-0.003819 max=0.006025 Jy/beam ! Clean residual mean=0.000001 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.0614858 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0614858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077764Jy sigma=1.234347 ! Fit after self-cal, rms=0.077297Jy sigma=1.226980 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=8.03 mas, bpa=-3.691 degrees ! Estimated noise=0.5182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733948 Jy ! Component: 100 - total flux cleaned = 0.011371 Jy ! Component: 150 - total flux cleaned = 0.0140214 Jy ! Component: 200 - total flux cleaned = 0.0158421 Jy ! Total flux subtracted in 200 components = 0.0158421 Jy ! Clean residual min=-0.002863 max=0.002599 Jy/beam ! Clean residual mean=-0.000009 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0773279 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.0773278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.076644Jy sigma=1.212358 ! Fit after self-cal, rms=0.076644Jy sigma=1.211393 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.008 x 8.03 at -3.691 degrees (North through East) ! Clean map min=-0.0026041 max=0.062525 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.03 HN 1.07 KP 1.04 ! LA 1.01 MK 0.97 NL 1.00 OV 0.90 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.05 KP 0.97 ! LA 0.97 MK 1.03 NL 0.96 OV 0.95 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.12 KP 1.01 ! LA 1.01 MK 1.03 NL 0.94 OV 0.97 ! PT 0.97 SC 1.04 ! ! ! Fit before self-cal, rms=0.076644Jy sigma=1.211393 ! Fit after self-cal, rms=0.077434Jy sigma=1.209202 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=8.036 mas, bpa=-3.457 degrees ! Estimated noise=0.512625 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154412 Jy ! Component: 100 - total flux cleaned = 0.00155163 Jy ! Component: 150 - total flux cleaned = 0.0015544 Jy ! Component: 200 - total flux cleaned = 0.00152021 Jy ! Total flux subtracted in 200 components = 0.00152021 Jy ! Clean residual min=-0.002625 max=0.002566 Jy/beam ! Clean residual mean=-0.000003 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0788481 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 60 components and 0.0788481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077366Jy sigma=1.208371 ! Fit after self-cal, rms=0.077430Jy sigma=1.207981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.077430Jy sigma=1.207981 ! Fit after self-cal, rms=0.078135Jy sigma=1.205375 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=8.029 mas, bpa=-3.441 degrees ! Estimated noise=0.516152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123648 Jy ! Component: 100 - total flux cleaned = 0.00138498 Jy ! Component: 150 - total flux cleaned = 0.00138633 Jy ! Component: 200 - total flux cleaned = 0.00141298 Jy ! Total flux subtracted in 200 components = 0.00141298 Jy ! Clean residual min=-0.002553 max=0.002272 Jy/beam ! Clean residual mean=0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.080261 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.080261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078091Jy sigma=1.204865 ! Fit after self-cal, rms=0.078108Jy sigma=1.204695 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315958 Jy ! Component: 100 - total flux cleaned = 0.000403127 Jy ! Component: 150 - total flux cleaned = 0.000427939 Jy ! Component: 200 - total flux cleaned = 0.000428202 Jy ! Total flux subtracted in 200 components = 0.000428202 Jy ! Clean residual min=-0.002539 max=0.002258 Jy/beam ! Clean residual mean=0.000001 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.0806892 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 0.0806892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078082Jy sigma=1.204438 ! Fit after self-cal, rms=0.078083Jy sigma=1.204387 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078083Jy sigma=1.204387 ! Fit after self-cal, rms=0.078613Jy sigma=1.203012 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=8.037 mas, bpa=-3.395 degrees ! Estimated noise=0.515947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643479 Jy ! Component: 100 - total flux cleaned = 0.000643461 Jy ! Component: 150 - total flux cleaned = 0.000595452 Jy ! Component: 200 - total flux cleaned = 0.000551281 Jy ! Total flux subtracted in 200 components = 0.000551281 Jy ! Clean residual min=-0.002413 max=0.002118 Jy/beam ! Clean residual mean=0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0812405 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.0812405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078587Jy sigma=1.202715 ! Fit after self-cal, rms=0.078614Jy sigma=1.202577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213471 Jy ! Component: 100 - total flux cleaned = 0.000215586 Jy ! Component: 150 - total flux cleaned = 0.000196313 Jy ! Component: 200 - total flux cleaned = 0.000178013 Jy ! Total flux subtracted in 200 components = 0.000178013 Jy ! Clean residual min=-0.002423 max=0.002123 Jy/beam ! Clean residual mean=0.000003 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0814185 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0814185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078597Jy sigma=1.202422 ! Fit after self-cal, rms=0.078601Jy sigma=1.202393 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078601Jy sigma=1.202393 ! Fit after self-cal, rms=0.078395Jy sigma=1.202334 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.486 mas, bmaj=17.59 mas, bpa=1.296 degrees ! Estimated noise=0.657731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000594942 Jy ! Component: 100 - total flux cleaned = 0.000632813 Jy ! Component: 150 - total flux cleaned = 0.000705367 Jy ! Component: 200 - total flux cleaned = 0.000742215 Jy ! Total flux subtracted in 200 components = 0.000742215 Jy ! Clean residual min=-0.002304 max=0.002165 Jy/beam ! Clean residual mean=0.000004 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0821608 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 103 components and 0.0821608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078391Jy sigma=1.202397 ! Fit after self-cal, rms=0.078395Jy sigma=1.202336 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115264 Jy ! Component: 100 - total flux cleaned = 0.000168739 Jy ! Component: 150 - total flux cleaned = 0.000189372 Jy ! Component: 200 - total flux cleaned = 0.000207291 Jy ! Total flux subtracted in 200 components = 0.000207291 Jy ! Clean residual min=-0.002316 max=0.002142 Jy/beam ! Clean residual mean=0.000005 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0823681 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.0823681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078393Jy sigma=1.202403 ! Fit after self-cal, rms=0.078393Jy sigma=1.202373 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.04 mas, bpa=-3.354 degrees ! Estimated noise=0.515606 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.04 at -3.354 degrees (North through East) ! Clean map min=-0.0021293 max=0.060904 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.55 mas, bmaj=6.779 mas, bpa=-2.904 degrees ! Estimated noise=0.659001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495796 Jy ! Component: 100 - total flux cleaned = 0.0624249 Jy ! Component: 150 - total flux cleaned = 0.0687143 Jy ! Component: 200 - total flux cleaned = 0.0727794 Jy ! Total flux subtracted in 200 components = 0.0727794 Jy ! Clean residual min=-0.003016 max=0.003107 Jy/beam ! Clean residual mean=0.000005 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0727794 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.0727794 Jy ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.04 mas, bpa=-3.354 degrees ! Estimated noise=0.515606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412572 Jy ! Component: 100 - total flux cleaned = 0.00653735 Jy ! Component: 150 - total flux cleaned = 0.00759357 Jy ! Component: 200 - total flux cleaned = 0.00795111 Jy ! Total flux subtracted in 200 components = 0.00795111 Jy ! Clean residual min=-0.002375 max=0.002333 Jy/beam ! Clean residual mean=0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0807305 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.0807305 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.486 mas, bmaj=17.59 mas, bpa=1.296 degrees ! Estimated noise=0.657731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125137 Jy ! Component: 100 - total flux cleaned = 0.00155395 Jy ! Component: 150 - total flux cleaned = 0.00155448 Jy ! Component: 200 - total flux cleaned = 0.00157055 Jy ! Total flux subtracted in 200 components = 0.00157055 Jy ! Clean residual min=-0.002211 max=0.002146 Jy/beam ! Clean residual mean=0.000005 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.082301 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.14461e-08 Jy ! Component: 100 - total flux cleaned = 4.2474e-07 Jy ! Component: 150 - total flux cleaned = 4.95832e-07 Jy ! Component: 200 - total flux cleaned = 1.32407e-05 Jy ! Total flux subtracted in 200 components = 1.32407e-05 Jy ! Clean residual min=-0.002233 max=0.002125 Jy/beam ! Clean residual mean=0.000005 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0823143 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.0823143 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.033 mas, bmaj=8.04 mas, bpa=-3.354 degrees ! Estimated noise=0.515606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062634 Jy ! Component: 100 - total flux cleaned = -0.000699347 Jy ! Component: 150 - total flux cleaned = -0.00073175 Jy ! Component: 200 - total flux cleaned = -0.000731597 Jy ! Total flux subtracted in 200 components = -0.000731597 Jy ! Clean residual min=-0.002358 max=0.002249 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0815827 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 83 components and 0.0815827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.078432Jy sigma=1.203013 ! Fit after self-cal, rms=0.078429Jy sigma=1.202849 wmodel J2239-2153_S_map.mod ! Writing 83 model components to file: J2239-2153_S_map.mod wobs J2239-2153_S_uvs.fits ! Writing UV FITS file: J2239-2153_S_uvs.fits wwins J2239-2153_S_map.win ! wwins: Wrote 2 windows to J2239-2153_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216386 Jy ! Component: 100 - total flux cleaned = -0.000177259 Jy ! Component: 150 - total flux cleaned = -0.0003187 Jy ! Component: 200 - total flux cleaned = -0.000353561 Jy ! Component: 250 - total flux cleaned = -0.000419268 Jy ! Component: 300 - total flux cleaned = -0.000419401 Jy ! Component: 350 - total flux cleaned = -0.000419425 Jy ! Component: 400 - total flux cleaned = -0.000389941 Jy ! Component: 450 - total flux cleaned = -0.000418703 Jy ! Component: 500 - total flux cleaned = -0.000418921 Jy ! Component: 550 - total flux cleaned = -0.000391476 Jy ! Component: 600 - total flux cleaned = -0.000391707 Jy ! Component: 650 - total flux cleaned = -0.000391164 Jy ! Component: 700 - total flux cleaned = -0.000339468 Jy ! Component: 750 - total flux cleaned = -0.000339404 Jy ! Component: 800 - total flux cleaned = -0.000363805 Jy ! Component: 850 - total flux cleaned = -0.000339349 Jy ! Component: 900 - total flux cleaned = -0.000387328 Jy ! Component: 950 - total flux cleaned = -0.000504825 Jy ! Component: 1000 - total flux cleaned = -0.000550645 Jy ! Component: 1050 - total flux cleaned = -0.000686455 Jy ! Component: 1100 - total flux cleaned = -0.000798278 Jy ! Component: 1150 - total flux cleaned = -0.000908656 Jy ! Component: 1200 - total flux cleaned = -0.000995577 Jy ! Component: 1250 - total flux cleaned = -0.00108155 Jy ! Component: 1300 - total flux cleaned = -0.00118762 Jy ! Component: 1350 - total flux cleaned = -0.0012714 Jy ! Component: 1400 - total flux cleaned = -0.00131324 Jy ! Component: 1450 - total flux cleaned = -0.00151842 Jy ! Component: 1500 - total flux cleaned = -0.0014778 Jy ! Component: 1550 - total flux cleaned = -0.00161825 Jy ! Component: 1600 - total flux cleaned = -0.00165788 Jy ! Component: 1650 - total flux cleaned = -0.00171686 Jy ! Component: 1700 - total flux cleaned = -0.00175569 Jy ! Component: 1750 - total flux cleaned = -0.00179418 Jy ! Component: 1800 - total flux cleaned = -0.001908 Jy ! Component: 1850 - total flux cleaned = -0.00198298 Jy ! Component: 1900 - total flux cleaned = -0.00203887 Jy ! Component: 1950 - total flux cleaned = -0.00211221 Jy ! Component: 2000 - total flux cleaned = -0.00218514 Jy ! Component: 2050 - total flux cleaned = -0.00227525 Jy ! Component: 2100 - total flux cleaned = -0.0023108 Jy ! Component: 2150 - total flux cleaned = -0.0023284 Jy ! Component: 2200 - total flux cleaned = -0.00243325 Jy ! Component: 2250 - total flux cleaned = -0.00245054 Jy ! Component: 2300 - total flux cleaned = -0.00258738 Jy ! Component: 2350 - total flux cleaned = -0.00258743 Jy ! Component: 2400 - total flux cleaned = -0.00262089 Jy ! Component: 2450 - total flux cleaned = -0.00263765 Jy ! Component: 2500 - total flux cleaned = -0.00263761 Jy ! Component: 2550 - total flux cleaned = -0.00275233 Jy ! Component: 2600 - total flux cleaned = -0.00276845 Jy ! Component: 2650 - total flux cleaned = -0.00280039 Jy ! Component: 2700 - total flux cleaned = -0.00283233 Jy ! Component: 2750 - total flux cleaned = -0.00281648 Jy ! Component: 2800 - total flux cleaned = -0.00291073 Jy ! Component: 2850 - total flux cleaned = -0.00295726 Jy ! Component: 2900 - total flux cleaned = -0.00295722 Jy ! Component: 2950 - total flux cleaned = -0.00300325 Jy ! Component: 3000 - total flux cleaned = -0.00303357 Jy ! Component: 3050 - total flux cleaned = -0.00301853 Jy ! Component: 3100 - total flux cleaned = -0.00309348 Jy ! Component: 3150 - total flux cleaned = -0.00312313 Jy ! Component: 3200 - total flux cleaned = -0.00307906 Jy ! Component: 3250 - total flux cleaned = -0.00309392 Jy ! Component: 3300 - total flux cleaned = -0.0031811 Jy ! Component: 3350 - total flux cleaned = -0.00316662 Jy ! Component: 3400 - total flux cleaned = -0.0031808 Jy ! Component: 3450 - total flux cleaned = -0.0031523 Jy ! Component: 3500 - total flux cleaned = -0.00312389 Jy ! Component: 3550 - total flux cleaned = -0.00310993 Jy ! Component: 3600 - total flux cleaned = -0.00308216 Jy ! Component: 3650 - total flux cleaned = -0.00308219 Jy ! Component: 3700 - total flux cleaned = -0.00310959 Jy ! Component: 3750 - total flux cleaned = -0.00310952 Jy ! Component: 3800 - total flux cleaned = -0.00304189 Jy ! Component: 3850 - total flux cleaned = -0.00302844 Jy ! Component: 3900 - total flux cleaned = -0.00304177 Jy ! Component: 3950 - total flux cleaned = -0.00302845 Jy ! Component: 4000 - total flux cleaned = -0.0030153 Jy ! Component: 4050 - total flux cleaned = -0.00298889 Jy ! Total flux subtracted in 4096 components = -0.00298872 Jy ! Clean residual min=-0.000869 max=0.000945 Jy/beam ! Clean residual mean=0.000002 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.078594 Jy keep ! Adding 253 model components to the UV plane model. ! The established model now contains 336 components and 0.078594 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2239-2153_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.033 x 8.04 at -3.354 degrees (North through East) ! Clean map min=-0.0021005 max=0.059988 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2239-2153_S_map.fits wmodel /vlbi/uf001/uva//J2239-2153_S_map.mod ! Writing 336 model components to file: /vlbi/uf001/uva//J2239-2153_S_map.mod wobs /vlbi/uf001/uva//J2239-2153_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2239-2153_S_uvs.fits wwins /vlbi/uf001/uva//J2239-2153_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2239-2153_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0599883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231545 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15795 1.15795 2.3159 4.63179 9.26359 18.5272 37.0543 74.1087 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.059 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 259.078 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2239-2153_S_dfm.log closed on Mon Jan 14 06:20:59 2019