! Started logfile: /vlbi/uf001/uva//J2238+6804_S_dfm.log on Mon Jan 14 06:20:28 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2238+6804_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2238+6804_S_uva.fits
! AN table 1: 96 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.99213 visibilities/baseline/integration-bin.
! Found source: J2238+6804
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 12858 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2238+6804_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.002150Jy  sigma=21.639431
! Fit after  self-cal, rms=0.895721Jy  sigma=19.302734
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.184 mas, bmaj=3.891 mas, bpa=0.2838 degrees
! Estimated noise=0.472468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0779105 Jy
! Component: 100  -  total flux cleaned = 0.109117 Jy
! Total flux subtracted in 100 components = 0.109117 Jy
! Clean residual min=-0.006085 max=0.016383 Jy/beam
! Clean residual mean=-0.000031 rms=0.001607 Jy/beam
! Combined flux in latest and established models = 0.109117 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.109117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068766Jy  sigma=1.424829
! Fit after  self-cal, rms=0.068023Jy  sigma=1.408567
! Inverting map 
! Added new window around map position (-2.5, 4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199027 Jy
! Component: 100  -  total flux cleaned = 0.0308022 Jy
! Total flux subtracted in 100 components = 0.0308022 Jy
! Clean residual min=-0.003668 max=0.006181 Jy/beam
! Clean residual mean=-0.000017 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.139919 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.139919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060777Jy  sigma=1.245175
! Fit after  self-cal, rms=0.060493Jy  sigma=1.239211
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798327 Jy
! Component: 100  -  total flux cleaned = 0.0126755 Jy
! Total flux subtracted in 100 components = 0.0126755 Jy
! Clean residual min=-0.003463 max=0.003694 Jy/beam
! Clean residual mean=-0.000011 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.152594 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.152594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059086Jy  sigma=1.208176
! Fit after  self-cal, rms=0.058996Jy  sigma=1.206400
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.804 mas, bmaj=4.66 mas, bpa=1.591 degrees
! Estimated noise=0.293761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520408 Jy
! Component: 100  -  total flux cleaned = 0.00793027 Jy
! Component: 150  -  total flux cleaned = 0.00971467 Jy
! Component: 200  -  total flux cleaned = 0.0109449 Jy
! Total flux subtracted in 200 components = 0.0109449 Jy
! Clean residual min=-0.002262 max=0.002675 Jy/beam
! Clean residual mean=-0.000011 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.163539 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 59 components and 0.163539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058504Jy  sigma=1.196499
! Fit after  self-cal, rms=0.058462Jy  sigma=1.195687
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.804 x 4.66 at 1.591 degrees (North through East)
! Clean map  min=-0.0021482  max=0.097179 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.00     KP        1.03     
!   LA        0.95     MK        1.00     NL        1.06     OV        1.03     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        0.99     KP        1.01     
!   LA        0.97     MK        0.98     NL        1.06     OV        0.95     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.00     KP        1.01     
!   LA        0.96     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.058462Jy  sigma=1.195687
! Fit after  self-cal, rms=0.058381Jy  sigma=1.190161
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=4.683 mas, bpa=1.306 degrees
! Estimated noise=0.294535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322285 Jy
! Component: 100  -  total flux cleaned = 0.000387641 Jy
! Component: 150  -  total flux cleaned = 0.000412399 Jy
! Component: 200  -  total flux cleaned = 0.00041232 Jy
! Total flux subtracted in 200 components = 0.00041232 Jy
! Clean residual min=-0.001820 max=0.002131 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.163951 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 64 components and 0.163951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058346Jy  sigma=1.189347
! Fit after  self-cal, rms=0.058333Jy  sigma=1.189026
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058333Jy  sigma=1.189026
! Fit after  self-cal, rms=0.057588Jy  sigma=1.181414
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.826 mas, bmaj=4.685 mas, bpa=1.963 degrees
! Estimated noise=0.294693 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000312103 Jy
! Component: 100  -  total flux cleaned = -0.000365354 Jy
! Component: 150  -  total flux cleaned = -0.000387713 Jy
! Component: 200  -  total flux cleaned = -0.000406716 Jy
! Total flux subtracted in 200 components = -0.000406716 Jy
! Clean residual min=-0.001567 max=0.001609 Jy/beam
! Clean residual mean=-0.000003 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.163545 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 69 components and 0.163545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057562Jy  sigma=1.180863
! Fit after  self-cal, rms=0.057556Jy  sigma=1.180651
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.91258e-05 Jy
! Component: 100  -  total flux cleaned = -5.00948e-05 Jy
! Component: 150  -  total flux cleaned = -6.89388e-05 Jy
! Component: 200  -  total flux cleaned = -8.61952e-05 Jy
! Total flux subtracted in 200 components = -8.61952e-05 Jy
! Clean residual min=-0.001562 max=0.001571 Jy/beam
! Clean residual mean=-0.000004 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.163458 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.163458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057540Jy  sigma=1.180297
! Fit after  self-cal, rms=0.057535Jy  sigma=1.180201
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057535Jy  sigma=1.180201
! Fit after  self-cal, rms=0.057615Jy  sigma=1.180190
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.826 mas, bmaj=4.693 mas, bpa=1.679 degrees
! Estimated noise=0.294907 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000161299 Jy
! Component: 100  -  total flux cleaned = -0.000181007 Jy
! Component: 150  -  total flux cleaned = -0.000197433 Jy
! Component: 200  -  total flux cleaned = -0.000197634 Jy
! Total flux subtracted in 200 components = -0.000197634 Jy
! Clean residual min=-0.001553 max=0.001508 Jy/beam
! Clean residual mean=-0.000004 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.163261 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 75 components and 0.163261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057602Jy  sigma=1.179905
! Fit after  self-cal, rms=0.057599Jy  sigma=1.179840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.76163e-06 Jy
! Component: 100  -  total flux cleaned = -2.46077e-05 Jy
! Component: 150  -  total flux cleaned = -2.4126e-05 Jy
! Component: 200  -  total flux cleaned = -2.44785e-05 Jy
! Total flux subtracted in 200 components = -2.44785e-05 Jy
! Clean residual min=-0.001550 max=0.001482 Jy/beam
! Clean residual mean=-0.000004 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.163236 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 79 components and 0.163236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057590Jy  sigma=1.179638
! Fit after  self-cal, rms=0.057587Jy  sigma=1.179589
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057587Jy  sigma=1.179589
! Fit after  self-cal, rms=0.057621Jy  sigma=1.179592
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.124 mas, bmaj=8.668 mas, bpa=10.98 degrees
! Estimated noise=0.375148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027453 Jy
! Component: 100  -  total flux cleaned = -0.000330579 Jy
! Component: 150  -  total flux cleaned = -0.000363097 Jy
! Component: 200  -  total flux cleaned = -0.000397922 Jy
! Total flux subtracted in 200 components = -0.000397922 Jy
! Clean residual min=-0.001662 max=0.001575 Jy/beam
! Clean residual mean=-0.000009 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.162838 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 0.162838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057620Jy  sigma=1.179504
! Fit after  self-cal, rms=0.057616Jy  sigma=1.179456
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.84055e-05 Jy
! Component: 100  -  total flux cleaned = -4.63751e-05 Jy
! Component: 150  -  total flux cleaned = -6.97481e-05 Jy
! Component: 200  -  total flux cleaned = -9.47555e-05 Jy
! Total flux subtracted in 200 components = -9.47555e-05 Jy
! Clean residual min=-0.001666 max=0.001585 Jy/beam
! Clean residual mean=-0.000010 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.162744 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 87 components and 0.162744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057617Jy  sigma=1.179432
! Fit after  self-cal, rms=0.057614Jy  sigma=1.179403
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.827 mas, bmaj=4.697 mas, bpa=1.511 degrees
! Estimated noise=0.294994 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.827 x 4.697 at 1.511 degrees (North through East)
! Clean map  min=-0.0014941  max=0.096571 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=3.92 mas, bpa=0.1591 degrees
! Estimated noise=0.477086 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0804395 Jy
! Component: 100  -  total flux cleaned = 0.11494 Jy
! Component: 150  -  total flux cleaned = 0.132346 Jy
! Component: 200  -  total flux cleaned = 0.141747 Jy
! Total flux subtracted in 200 components = 0.141747 Jy
! Clean residual min=-0.003095 max=0.004734 Jy/beam
! Clean residual mean=-0.000013 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.141747 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.141747 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.827 mas, bmaj=4.697 mas, bpa=1.511 degrees
! Estimated noise=0.294994 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00790308 Jy
! Component: 100  -  total flux cleaned = 0.012482 Jy
! Component: 150  -  total flux cleaned = 0.0153638 Jy
! Component: 200  -  total flux cleaned = 0.0172393 Jy
! Total flux subtracted in 200 components = 0.0172393 Jy
! Clean residual min=-0.001556 max=0.001695 Jy/beam
! Clean residual mean=-0.000009 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.158986 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 62 components and 0.158986 Jy
! Inverting map 
! Added new window around map position (52, -49).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158961 Jy
! Component: 100  -  total flux cleaned = 0.00264148 Jy
! Component: 150  -  total flux cleaned = 0.00320693 Jy
! Component: 200  -  total flux cleaned = 0.00367826 Jy
! Total flux subtracted in 200 components = 0.00367826 Jy
! Clean residual min=-0.001441 max=0.001439 Jy/beam
! Clean residual mean=-0.000008 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.162664 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 77 components and 0.162664 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.124 mas, bmaj=8.668 mas, bpa=10.98 degrees
! Estimated noise=0.375148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000749143 Jy
! Component: 100  -  total flux cleaned = 0.000975642 Jy
! Component: 150  -  total flux cleaned = 0.00110123 Jy
! Component: 200  -  total flux cleaned = 0.00113955 Jy
! Total flux subtracted in 200 components = 0.00113955 Jy
! Clean residual min=-0.001526 max=0.001566 Jy/beam
! Clean residual mean=-0.000015 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.163804 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.37431e-05 Jy
! Component: 100  -  total flux cleaned = 6.34736e-05 Jy
! Component: 150  -  total flux cleaned = 8.94353e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105114 Jy
! Total flux subtracted in 200 components = 0.000105114 Jy
! Clean residual min=-0.001495 max=0.001562 Jy/beam
! Clean residual mean=-0.000014 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.163909 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 122 components and 0.163909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.827 mas, bmaj=4.697 mas, bpa=1.511 degrees
! Estimated noise=0.294994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.11122e-05 Jy
! Component: 100  -  total flux cleaned = -2.45025e-05 Jy
! Component: 150  -  total flux cleaned = -2.4619e-05 Jy
! Component: 200  -  total flux cleaned = -1.02522e-05 Jy
! Total flux subtracted in 200 components = -1.02522e-05 Jy
! Clean residual min=-0.001417 max=0.001366 Jy/beam
! Clean residual mean=-0.000006 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.163899 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 133 components and 0.163899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057565Jy  sigma=1.178317
! Fit after  self-cal, rms=0.057553Jy  sigma=1.178103
wmodel J2238+6804_S_map.mod
! Writing 133 model components to file: J2238+6804_S_map.mod
wobs   J2238+6804_S_uvs.fits
! Writing UV FITS file: J2238+6804_S_uvs.fits
wwins  J2238+6804_S_map.win
! wwins: Wrote 3 windows to J2238+6804_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000392602 Jy
! Component: 100  -  total flux cleaned = -0.000602468 Jy
! Component: 150  -  total flux cleaned = -0.000558771 Jy
! Component: 200  -  total flux cleaned = -0.000600866 Jy
! Component: 250  -  total flux cleaned = -0.000601403 Jy
! Component: 300  -  total flux cleaned = -0.00058173 Jy
! Component: 350  -  total flux cleaned = -0.000621038 Jy
! Component: 400  -  total flux cleaned = -0.000678317 Jy
! Component: 450  -  total flux cleaned = -0.000734348 Jy
! Component: 500  -  total flux cleaned = -0.000771093 Jy
! Component: 550  -  total flux cleaned = -0.000753456 Jy
! Component: 600  -  total flux cleaned = -0.000825451 Jy
! Component: 650  -  total flux cleaned = -0.000930742 Jy
! Component: 700  -  total flux cleaned = -0.000965236 Jy
! Component: 750  -  total flux cleaned = -0.000999307 Jy
! Component: 800  -  total flux cleaned = -0.00106688 Jy
! Component: 850  -  total flux cleaned = -0.00108352 Jy
! Component: 900  -  total flux cleaned = -0.00100067 Jy
! Component: 950  -  total flux cleaned = -0.000984381 Jy
! Component: 1000  -  total flux cleaned = -0.00101688 Jy
! Component: 1050  -  total flux cleaned = -0.000985084 Jy
! Component: 1100  -  total flux cleaned = -0.000985171 Jy
! Component: 1150  -  total flux cleaned = -0.00103208 Jy
! Component: 1200  -  total flux cleaned = -0.00104766 Jy
! Component: 1250  -  total flux cleaned = -0.00103246 Jy
! Component: 1300  -  total flux cleaned = -0.00106282 Jy
! Component: 1350  -  total flux cleaned = -0.00110799 Jy
! Component: 1400  -  total flux cleaned = -0.00110786 Jy
! Component: 1450  -  total flux cleaned = -0.00107829 Jy
! Component: 1500  -  total flux cleaned = -0.00116647 Jy
! Component: 1550  -  total flux cleaned = -0.00118105 Jy
! Component: 1600  -  total flux cleaned = -0.00118106 Jy
! Component: 1650  -  total flux cleaned = -0.00122412 Jy
! Component: 1700  -  total flux cleaned = -0.00121007 Jy
! Component: 1750  -  total flux cleaned = -0.0013088 Jy
! Component: 1800  -  total flux cleaned = -0.00128099 Jy
! Component: 1850  -  total flux cleaned = -0.00136436 Jy
! Component: 1900  -  total flux cleaned = -0.00137814 Jy
! Component: 1950  -  total flux cleaned = -0.00133738 Jy
! Component: 2000  -  total flux cleaned = -0.0014461 Jy
! Component: 2050  -  total flux cleaned = -0.00141906 Jy
! Component: 2100  -  total flux cleaned = -0.00152598 Jy
! Component: 2150  -  total flux cleaned = -0.0015656 Jy
! Component: 2200  -  total flux cleaned = -0.00155231 Jy
! Component: 2250  -  total flux cleaned = -0.00159141 Jy
! Component: 2300  -  total flux cleaned = -0.00164316 Jy
! Component: 2350  -  total flux cleaned = -0.00163019 Jy
! Component: 2400  -  total flux cleaned = -0.00168129 Jy
! Component: 2450  -  total flux cleaned = -0.001732 Jy
! Component: 2500  -  total flux cleaned = -0.00171946 Jy
! Component: 2550  -  total flux cleaned = -0.0018071 Jy
! Component: 2600  -  total flux cleaned = -0.00185685 Jy
! Component: 2650  -  total flux cleaned = -0.00184437 Jy
! Component: 2700  -  total flux cleaned = -0.00181977 Jy
! Component: 2750  -  total flux cleaned = -0.00185652 Jy
! Component: 2800  -  total flux cleaned = -0.00191725 Jy
! Component: 2850  -  total flux cleaned = -0.00191711 Jy
! Component: 2900  -  total flux cleaned = -0.00197713 Jy
! Component: 2950  -  total flux cleaned = -0.00198934 Jy
! Component: 3000  -  total flux cleaned = -0.00200124 Jy
! Component: 3050  -  total flux cleaned = -0.00208382 Jy
! Component: 3100  -  total flux cleaned = -0.00209555 Jy
! Component: 3150  -  total flux cleaned = -0.00214225 Jy
! Component: 3200  -  total flux cleaned = -0.00216529 Jy
! Component: 3250  -  total flux cleaned = -0.00224597 Jy
! Component: 3300  -  total flux cleaned = -0.00225732 Jy
! Component: 3350  -  total flux cleaned = -0.00226862 Jy
! Component: 3400  -  total flux cleaned = -0.0022686 Jy
! Component: 3450  -  total flux cleaned = -0.00230247 Jy
! Component: 3500  -  total flux cleaned = -0.00234737 Jy
! Component: 3550  -  total flux cleaned = -0.00235845 Jy
! Component: 3600  -  total flux cleaned = -0.00233631 Jy
! Component: 3650  -  total flux cleaned = -0.00235841 Jy
! Component: 3700  -  total flux cleaned = -0.00231456 Jy
! Component: 3750  -  total flux cleaned = -0.00232558 Jy
! Component: 3800  -  total flux cleaned = -0.00236901 Jy
! Component: 3850  -  total flux cleaned = -0.00232582 Jy
! Component: 3900  -  total flux cleaned = -0.00235815 Jy
! Component: 3950  -  total flux cleaned = -0.00242246 Jy
! Component: 4000  -  total flux cleaned = -0.00243311 Jy
! Component: 4050  -  total flux cleaned = -0.00239062 Jy
! Total flux subtracted in 4096 components = -0.0024329 Jy
! Clean residual min=-0.000589 max=0.000626 Jy/beam
! Clean residual mean=-0.000003 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.161466 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 453 components and 0.161466 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2238+6804_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.827 x 4.697 at 1.511 degrees (North through East)
! Clean map  min=-0.0011275  max=0.096451 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2238+6804_S_map.fits
wmodel /vlbi/uf001/uva//J2238+6804_S_map.mod
! Writing 453 model components to file: /vlbi/uf001/uva//J2238+6804_S_map.mod
wobs   /vlbi/uf001/uva//J2238+6804_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2238+6804_S_uvs.fits
wwins  /vlbi/uf001/uva//J2238+6804_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2238+6804_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0964508 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000190237 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.591711 0.591711 1.18342 2.36684 4.73369 9.46737 18.9347 37.8695 75.739
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.096 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  507.004 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2238+6804_S_dfm.log closed on Mon Jan 14 06:20:33 2019