! Started logfile: /vlbi/uf001/uva//J2236-2309_S_dfm.log on Mon Jan 14 06:19:21 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2236-2309_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2236-2309_S_uva.fits
! AN table 1: 38 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.875731 visibilities/baseline/integration-bin.
! Found source: J2236-2309
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 3594 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2236-2309_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.067268Jy  sigma=18.356995
! Fit after  self-cal, rms=0.693023Jy  sigma=12.153478
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.274 mas, bmaj=6.651 mas, bpa=-8.371 degrees
! Estimated noise=0.87706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.227804 Jy
! Component: 100  -  total flux cleaned = 0.285129 Jy
! Total flux subtracted in 100 components = 0.285129 Jy
! Clean residual min=-0.013462 max=0.025207 Jy/beam
! Clean residual mean=0.000002 rms=0.003900 Jy/beam
! Combined flux in latest and established models = 0.285129 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.285129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134922Jy  sigma=1.689897
! Fit after  self-cal, rms=0.134880Jy  sigma=1.689395
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0282602 Jy
! Component: 100  -  total flux cleaned = 0.0440777 Jy
! Total flux subtracted in 100 components = 0.0440777 Jy
! Clean residual min=-0.009611 max=0.016506 Jy/beam
! Clean residual mean=-0.000006 rms=0.002715 Jy/beam
! Combined flux in latest and established models = 0.329207 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.329207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124071Jy  sigma=1.502484
! Fit after  self-cal, rms=0.124033Jy  sigma=1.502100
! Inverting map 
! Added new window around map position (3.5, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143974 Jy
! Component: 100  -  total flux cleaned = 0.022674 Jy
! Total flux subtracted in 100 components = 0.022674 Jy
! Clean residual min=-0.009584 max=0.012655 Jy/beam
! Clean residual mean=-0.000006 rms=0.002304 Jy/beam
! Combined flux in latest and established models = 0.351881 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 31 components and 0.351881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120954Jy  sigma=1.452573
! Fit after  self-cal, rms=0.120800Jy  sigma=1.448721
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.71 mas, bmaj=7.471 mas, bpa=-7.202 degrees
! Estimated noise=0.701462 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116956 Jy
! Component: 100  -  total flux cleaned = 0.0189886 Jy
! Component: 150  -  total flux cleaned = 0.0239453 Jy
! Component: 200  -  total flux cleaned = 0.0257226 Jy
! Total flux subtracted in 200 components = 0.0257226 Jy
! Clean residual min=-0.010387 max=0.012846 Jy/beam
! Clean residual mean=-0.000020 rms=0.002562 Jy/beam
! Combined flux in latest and established models = 0.377604 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 47 components and 0.377604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118506Jy  sigma=1.426279
! Fit after  self-cal, rms=0.118441Jy  sigma=1.425162
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.71 x 7.471 at -7.202 degrees (North through East)
! Clean map  min=-0.010698  max=0.29766 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     HN        1.08     KP        1.02     LA        0.95     
!   MK        0.99     NL        1.07     OV        0.99     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.46     HN        1.10     KP        1.02     LA        0.98     
!   MK        0.98     NL        1.07     OV        0.97     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.13     KP        1.03     LA        0.96     
!   MK        1.03     NL        1.06     OV        0.99     PT        0.97     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.118441Jy  sigma=1.425162
! Fit after  self-cal, rms=0.079265Jy  sigma=1.279841
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.727 mas, bmaj=7.447 mas, bpa=-6.974 degrees
! Estimated noise=0.703355 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00385642 Jy
! Component: 100  -  total flux cleaned = -0.00375201 Jy
! Component: 150  -  total flux cleaned = -0.00356815 Jy
! Component: 200  -  total flux cleaned = -0.00348941 Jy
! Total flux subtracted in 200 components = -0.00348941 Jy
! Clean residual min=-0.005542 max=0.005543 Jy/beam
! Clean residual mean=-0.000004 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.374114 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 62 components and 0.374114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078880Jy  sigma=1.273199
! Fit after  self-cal, rms=0.078833Jy  sigma=1.272228
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078833Jy  sigma=1.272228
! Fit after  self-cal, rms=0.078671Jy  sigma=1.253625
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.729 mas, bmaj=7.442 mas, bpa=-6.848 degrees
! Estimated noise=0.704751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00301204 Jy
! Component: 100  -  total flux cleaned = -0.00296313 Jy
! Component: 150  -  total flux cleaned = -0.00285623 Jy
! Component: 200  -  total flux cleaned = -0.00276359 Jy
! Total flux subtracted in 200 components = -0.00276359 Jy
! Clean residual min=-0.004569 max=0.004975 Jy/beam
! Clean residual mean=-0.000005 rms=0.001038 Jy/beam
! Combined flux in latest and established models = 0.371351 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 68 components and 0.371351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078500Jy  sigma=1.251253
! Fit after  self-cal, rms=0.078494Jy  sigma=1.250844
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00426953 Jy
! Component: 100  -  total flux cleaned = 0.00510873 Jy
! Component: 150  -  total flux cleaned = 0.00545112 Jy
! Component: 200  -  total flux cleaned = 0.00585005 Jy
! Total flux subtracted in 200 components = 0.00585005 Jy
! Clean residual min=-0.003671 max=0.003440 Jy/beam
! Clean residual mean=-0.000003 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 0.377201 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.377201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078218Jy  sigma=1.246488
! Fit after  self-cal, rms=0.078208Jy  sigma=1.246417
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078208Jy  sigma=1.246417
! Fit after  self-cal, rms=0.078373Jy  sigma=1.245817
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.731 mas, bmaj=7.436 mas, bpa=-6.799 degrees
! Estimated noise=0.703971 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000726293 Jy
! Component: 100  -  total flux cleaned = -0.000561128 Jy
! Component: 150  -  total flux cleaned = -0.00042648 Jy
! Component: 200  -  total flux cleaned = -0.000304645 Jy
! Total flux subtracted in 200 components = -0.000304645 Jy
! Clean residual min=-0.003368 max=0.003171 Jy/beam
! Clean residual mean=-0.000000 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.376896 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 100 components and 0.376896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078293Jy  sigma=1.244813
! Fit after  self-cal, rms=0.078291Jy  sigma=1.244758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.66474e-05 Jy
! Component: 100  -  total flux cleaned = 3.96418e-05 Jy
! Component: 150  -  total flux cleaned = 0.000104976 Jy
! Component: 200  -  total flux cleaned = 0.000165853 Jy
! Total flux subtracted in 200 components = 0.000165853 Jy
! Clean residual min=-0.003258 max=0.003202 Jy/beam
! Clean residual mean=-0.000000 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.377062 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 107 components and 0.377062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078260Jy  sigma=1.244334
! Fit after  self-cal, rms=0.078257Jy  sigma=1.244319
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078257Jy  sigma=1.244319
! Fit after  self-cal, rms=0.078379Jy  sigma=1.244098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.871 mas, bmaj=16.35 mas, bpa=-4.314 degrees
! Estimated noise=0.991402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.73941e-05 Jy
! Component: 100  -  total flux cleaned = 0.000306924 Jy
! Component: 150  -  total flux cleaned = 0.000566027 Jy
! Component: 200  -  total flux cleaned = 0.00063835 Jy
! Total flux subtracted in 200 components = 0.00063835 Jy
! Clean residual min=-0.003524 max=0.003722 Jy/beam
! Clean residual mean=0.000003 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 0.3777 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 120 components and 0.3777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078372Jy  sigma=1.244022
! Fit after  self-cal, rms=0.078366Jy  sigma=1.243897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000135962 Jy
! Component: 100  -  total flux cleaned = -3.53412e-05 Jy
! Component: 150  -  total flux cleaned = 2.78129e-05 Jy
! Component: 200  -  total flux cleaned = 9.7878e-06 Jy
! Total flux subtracted in 200 components = 9.7878e-06 Jy
! Clean residual min=-0.003492 max=0.003742 Jy/beam
! Clean residual mean=0.000003 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.37771 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 130 components and 0.37771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078367Jy  sigma=1.243862
! Fit after  self-cal, rms=0.078360Jy  sigma=1.243805
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.731 mas, bmaj=7.431 mas, bpa=-6.768 degrees
! Estimated noise=0.703727 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.731 x 7.431 at -6.768 degrees (North through East)
! Clean map  min=-0.0031655  max=0.29905 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=6.581 mas, bpa=-7.761 degrees
! Estimated noise=0.888466 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.230586 Jy
! Component: 100  -  total flux cleaned = 0.287735 Jy
! Component: 150  -  total flux cleaned = 0.315223 Jy
! Component: 200  -  total flux cleaned = 0.330912 Jy
! Total flux subtracted in 200 components = 0.330912 Jy
! Clean residual min=-0.005556 max=0.008249 Jy/beam
! Clean residual mean=0.000002 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 0.330912 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.330912 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.731 mas, bmaj=7.431 mas, bpa=-6.768 degrees
! Estimated noise=0.703727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141204 Jy
! Component: 100  -  total flux cleaned = 0.0221904 Jy
! Component: 150  -  total flux cleaned = 0.0274978 Jy
! Component: 200  -  total flux cleaned = 0.0314765 Jy
! Total flux subtracted in 200 components = 0.0314765 Jy
! Clean residual min=-0.003768 max=0.003981 Jy/beam
! Clean residual mean=-0.000005 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.362388 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 0.362388 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.871 mas, bmaj=16.35 mas, bpa=-4.314 degrees
! Estimated noise=0.991402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00619072 Jy
! Component: 100  -  total flux cleaned = 0.00978364 Jy
! Component: 150  -  total flux cleaned = 0.0120552 Jy
! Component: 200  -  total flux cleaned = 0.0135238 Jy
! Total flux subtracted in 200 components = 0.0135238 Jy
! Clean residual min=-0.003946 max=0.003647 Jy/beam
! Clean residual mean=0.000001 rms=0.001039 Jy/beam
! Combined flux in latest and established models = 0.375912 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000965359 Jy
! Component: 100  -  total flux cleaned = 0.00147137 Jy
! Component: 150  -  total flux cleaned = 0.00161496 Jy
! Component: 200  -  total flux cleaned = 0.00167118 Jy
! Total flux subtracted in 200 components = 0.00167118 Jy
! Clean residual min=-0.003772 max=0.003743 Jy/beam
! Clean residual mean=0.000003 rms=0.001009 Jy/beam
! Combined flux in latest and established models = 0.377583 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 90 components and 0.377584 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.731 mas, bmaj=7.431 mas, bpa=-6.768 degrees
! Estimated noise=0.703727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000405242 Jy
! Component: 100  -  total flux cleaned = -0.000611179 Jy
! Component: 150  -  total flux cleaned = -0.00075085 Jy
! Component: 200  -  total flux cleaned = -0.000831711 Jy
! Total flux subtracted in 200 components = -0.000831711 Jy
! Clean residual min=-0.003179 max=0.003202 Jy/beam
! Clean residual mean=0.000000 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.376752 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 109 components and 0.376752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078377Jy  sigma=1.244389
! Fit after  self-cal, rms=0.078361Jy  sigma=1.244182
wmodel J2236-2309_S_map.mod
! Writing 109 model components to file: J2236-2309_S_map.mod
wobs   J2236-2309_S_uvs.fits
! Writing UV FITS file: J2236-2309_S_uvs.fits
wwins  J2236-2309_S_map.win
! wwins: Wrote 3 windows to J2236-2309_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000554957 Jy
! Component: 100  -  total flux cleaned = 0.000827649 Jy
! Component: 150  -  total flux cleaned = 0.000881156 Jy
! Component: 200  -  total flux cleaned = 0.000978462 Jy
! Component: 250  -  total flux cleaned = 0.00116324 Jy
! Component: 300  -  total flux cleaned = 0.00111835 Jy
! Component: 350  -  total flux cleaned = 0.00116403 Jy
! Component: 400  -  total flux cleaned = 0.00133464 Jy
! Component: 450  -  total flux cleaned = 0.00153921 Jy
! Component: 500  -  total flux cleaned = 0.00169693 Jy
! Component: 550  -  total flux cleaned = 0.00169731 Jy
! Component: 600  -  total flux cleaned = 0.00173452 Jy
! Component: 650  -  total flux cleaned = 0.00177049 Jy
! Component: 700  -  total flux cleaned = 0.0019112 Jy
! Component: 750  -  total flux cleaned = 0.0019113 Jy
! Component: 800  -  total flux cleaned = 0.00197885 Jy
! Component: 850  -  total flux cleaned = 0.00197904 Jy
! Component: 900  -  total flux cleaned = 0.00184871 Jy
! Component: 950  -  total flux cleaned = 0.00188089 Jy
! Component: 1000  -  total flux cleaned = 0.00178732 Jy
! Component: 1050  -  total flux cleaned = 0.00184925 Jy
! Component: 1100  -  total flux cleaned = 0.00181853 Jy
! Component: 1150  -  total flux cleaned = 0.00178878 Jy
! Component: 1200  -  total flux cleaned = 0.00178879 Jy
! Component: 1250  -  total flux cleaned = 0.00176039 Jy
! Component: 1300  -  total flux cleaned = 0.00178857 Jy
! Component: 1350  -  total flux cleaned = 0.00176113 Jy
! Component: 1400  -  total flux cleaned = 0.00181474 Jy
! Component: 1450  -  total flux cleaned = 0.00181468 Jy
! Component: 1500  -  total flux cleaned = 0.00184124 Jy
! Component: 1550  -  total flux cleaned = 0.00179012 Jy
! Component: 1600  -  total flux cleaned = 0.00186635 Jy
! Component: 1650  -  total flux cleaned = 0.00174168 Jy
! Component: 1700  -  total flux cleaned = 0.00174228 Jy
! Component: 1750  -  total flux cleaned = 0.00183898 Jy
! Component: 1800  -  total flux cleaned = 0.00183856 Jy
! Component: 1850  -  total flux cleaned = 0.00186156 Jy
! Component: 1900  -  total flux cleaned = 0.00186218 Jy
! Component: 1950  -  total flux cleaned = 0.0019302 Jy
! Component: 2000  -  total flux cleaned = 0.00188516 Jy
! Component: 2050  -  total flux cleaned = 0.00190709 Jy
! Component: 2100  -  total flux cleaned = 0.00192903 Jy
! Component: 2150  -  total flux cleaned = 0.0019507 Jy
! Component: 2200  -  total flux cleaned = 0.0019933 Jy
! Component: 2250  -  total flux cleaned = 0.00197226 Jy
! Component: 2300  -  total flux cleaned = 0.00195207 Jy
! Component: 2350  -  total flux cleaned = 0.00199304 Jy
! Component: 2400  -  total flux cleaned = 0.00203305 Jy
! Component: 2450  -  total flux cleaned = 0.00205334 Jy
! Component: 2500  -  total flux cleaned = 0.00207313 Jy
! Component: 2550  -  total flux cleaned = 0.00217013 Jy
! Component: 2600  -  total flux cleaned = 0.00222736 Jy
! Component: 2650  -  total flux cleaned = 0.00222751 Jy
! Component: 2700  -  total flux cleaned = 0.0022837 Jy
! Component: 2750  -  total flux cleaned = 0.00230224 Jy
! Component: 2800  -  total flux cleaned = 0.00232042 Jy
! Component: 2850  -  total flux cleaned = 0.00232026 Jy
! Component: 2900  -  total flux cleaned = 0.00240926 Jy
! Component: 2950  -  total flux cleaned = 0.0023739 Jy
! Component: 3000  -  total flux cleaned = 0.00240894 Jy
! Component: 3050  -  total flux cleaned = 0.00244324 Jy
! Component: 3100  -  total flux cleaned = 0.0024433 Jy
! Component: 3150  -  total flux cleaned = 0.00240965 Jy
! Component: 3200  -  total flux cleaned = 0.00240972 Jy
! Component: 3250  -  total flux cleaned = 0.00234357 Jy
! Component: 3300  -  total flux cleaned = 0.00231096 Jy
! Component: 3350  -  total flux cleaned = 0.00229446 Jy
! Component: 3400  -  total flux cleaned = 0.00226221 Jy
! Component: 3450  -  total flux cleaned = 0.00223023 Jy
! Component: 3500  -  total flux cleaned = 0.00215127 Jy
! Component: 3550  -  total flux cleaned = 0.00211982 Jy
! Component: 3600  -  total flux cleaned = 0.00208865 Jy
! Component: 3650  -  total flux cleaned = 0.00202744 Jy
! Component: 3700  -  total flux cleaned = 0.00196644 Jy
! Component: 3750  -  total flux cleaned = 0.00195119 Jy
! Component: 3800  -  total flux cleaned = 0.00189162 Jy
! Component: 3850  -  total flux cleaned = 0.00184712 Jy
! Component: 3900  -  total flux cleaned = 0.00183252 Jy
! Component: 3950  -  total flux cleaned = 0.00170125 Jy
! Component: 4000  -  total flux cleaned = 0.00164339 Jy
! Component: 4050  -  total flux cleaned = 0.00161453 Jy
! Total flux subtracted in 4096 components = 0.00152892 Jy
! Clean residual min=-0.000843 max=0.000910 Jy/beam
! Clean residual mean=0.000001 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.378281 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 398 components and 0.378281 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2236-2309_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.731 x 7.431 at -6.768 degrees (North through East)
! Clean map  min=-0.0021449  max=0.30151 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2236-2309_S_map.fits
wmodel /vlbi/uf001/uva//J2236-2309_S_map.mod
! Writing 398 model components to file: /vlbi/uf001/uva//J2236-2309_S_map.mod
wobs   /vlbi/uf001/uva//J2236-2309_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2236-2309_S_uvs.fits
wwins  /vlbi/uf001/uva//J2236-2309_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2236-2309_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.301514 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249978 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.248723 0.248723 0.497446 0.994892 1.98978 3.97957 7.95914 15.9183 31.8365 63.6731
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.301 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1206.16 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2236-2309_S_dfm.log closed on Mon Jan 14 06:19:25 2019