! Started logfile: /vlbi/uf001/uva//J2230-1325_S_dfm.log on Mon Jan 14 06:17:46 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2230-1325_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2230-1325_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.843275 visibilities/baseline/integration-bin.
! Found source: J2230-1325
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 6489 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2230-1325_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.088855Jy  sigma=18.299632
! Fit after  self-cal, rms=0.604905Jy  sigma=10.175898
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=6.589 mas, bpa=-5.333 degrees
! Estimated noise=0.72766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.307014 Jy
! Component: 100  -  total flux cleaned = 0.375898 Jy
! Total flux subtracted in 100 components = 0.375898 Jy
! Clean residual min=-0.012784 max=0.024269 Jy/beam
! Clean residual mean=-0.000121 rms=0.003841 Jy/beam
! Combined flux in latest and established models = 0.375897 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.375897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.107508Jy  sigma=1.776548
! Fit after  self-cal, rms=0.107498Jy  sigma=1.776484
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024401 Jy
! Component: 100  -  total flux cleaned = 0.0353332 Jy
! Total flux subtracted in 100 components = 0.0353332 Jy
! Clean residual min=-0.012479 max=0.024622 Jy/beam
! Clean residual mean=-0.000087 rms=0.003395 Jy/beam
! Combined flux in latest and established models = 0.411231 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.411231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.100626Jy  sigma=1.660214
! Fit after  self-cal, rms=0.100589Jy  sigma=1.659827
! Inverting map 
! Added new window around map position (-10.5, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219521 Jy
! Component: 100  -  total flux cleaned = 0.0326899 Jy
! Total flux subtracted in 100 components = 0.0326899 Jy
! Clean residual min=-0.011789 max=0.015358 Jy/beam
! Clean residual mean=-0.000072 rms=0.002941 Jy/beam
! Combined flux in latest and established models = 0.443921 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.443921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.094846Jy  sigma=1.560513
! Fit after  self-cal, rms=0.094425Jy  sigma=1.552640
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.808 mas, bmaj=7.111 mas, bpa=-4.184 degrees
! Estimated noise=0.579483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174388 Jy
! Component: 100  -  total flux cleaned = 0.0277729 Jy
! Component: 150  -  total flux cleaned = 0.0353583 Jy
! Component: 200  -  total flux cleaned = 0.0411265 Jy
! Total flux subtracted in 200 components = 0.0411265 Jy
! Clean residual min=-0.010109 max=0.014260 Jy/beam
! Clean residual mean=-0.000044 rms=0.002675 Jy/beam
! Combined flux in latest and established models = 0.485047 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 65 components and 0.485047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090860Jy  sigma=1.487543
! Fit after  self-cal, rms=0.090598Jy  sigma=1.482946
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.808 x 7.111 at -4.184 degrees (North through East)
! Clean map  min=-0.010181  max=0.39876 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        0.98     KP        1.01     
!   LA        0.91     MK        1.01     NL        1.06     OV        1.04     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.94     HN        0.99     KP        0.99     
!   LA        0.92     MK        1.01     NL        1.11     OV        1.01     
!   PT        1.00*    SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.95     HN        0.97     KP        1.00     
!   LA        0.91     MK        1.01     NL        1.10     OV        0.99     
!   PT        1.00*    SC        0.98     
! 
! 
! Fit before self-cal, rms=0.090598Jy  sigma=1.482946
! Fit after  self-cal, rms=0.086002Jy  sigma=1.397496
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.16 mas, bpa=-4 degrees
! Estimated noise=0.576704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-19, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101821 Jy
! Component: 100  -  total flux cleaned = 0.0142839 Jy
! Component: 150  -  total flux cleaned = 0.016671 Jy
! Component: 200  -  total flux cleaned = 0.0172919 Jy
! Total flux subtracted in 200 components = 0.0172919 Jy
! Clean residual min=-0.006396 max=0.005615 Jy/beam
! Clean residual mean=0.000005 rms=0.001544 Jy/beam
! Combined flux in latest and established models = 0.502339 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 96 components and 0.502339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084642Jy  sigma=1.372755
! Fit after  self-cal, rms=0.084658Jy  sigma=1.372079
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084658Jy  sigma=1.372079
! Fit after  self-cal, rms=0.082921Jy  sigma=1.332717
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.189 mas, bpa=-3.844 degrees
! Estimated noise=0.577346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0003177 Jy
! Component: 100  -  total flux cleaned = 0.000456411 Jy
! Component: 150  -  total flux cleaned = 0.000456453 Jy
! Component: 200  -  total flux cleaned = 0.000548432 Jy
! Total flux subtracted in 200 components = 0.000548432 Jy
! Clean residual min=-0.003595 max=0.003787 Jy/beam
! Clean residual mean=-0.000001 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.502887 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 110 components and 0.502887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082585Jy  sigma=1.326217
! Fit after  self-cal, rms=0.082590Jy  sigma=1.325990
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.52557e-07 Jy
! Component: 100  -  total flux cleaned = 0.000319914 Jy
! Component: 150  -  total flux cleaned = 0.0003186 Jy
! Component: 200  -  total flux cleaned = 0.000385016 Jy
! Total flux subtracted in 200 components = 0.000385016 Jy
! Clean residual min=-0.003473 max=0.003564 Jy/beam
! Clean residual mean=-0.000002 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.503272 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 124 components and 0.503272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082474Jy  sigma=1.323702
! Fit after  self-cal, rms=0.082471Jy  sigma=1.323667
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082471Jy  sigma=1.323667
! Fit after  self-cal, rms=0.082395Jy  sigma=1.319494
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.207 mas, bpa=-3.798 degrees
! Estimated noise=0.57696 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108946 Jy
! Component: 100  -  total flux cleaned = -0.00182458 Jy
! Component: 150  -  total flux cleaned = -0.00211183 Jy
! Component: 200  -  total flux cleaned = -0.00211115 Jy
! Total flux subtracted in 200 components = -0.00211115 Jy
! Clean residual min=-0.003073 max=0.003251 Jy/beam
! Clean residual mean=-0.000006 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.501161 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 0.501161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082266Jy  sigma=1.316975
! Fit after  self-cal, rms=0.082272Jy  sigma=1.316933
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128991 Jy
! Component: 100  -  total flux cleaned = -0.000128038 Jy
! Component: 150  -  total flux cleaned = -7.32265e-05 Jy
! Component: 200  -  total flux cleaned = -7.07531e-05 Jy
! Total flux subtracted in 200 components = -7.07531e-05 Jy
! Clean residual min=-0.003001 max=0.003102 Jy/beam
! Clean residual mean=-0.000007 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.50109 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 145 components and 0.501091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082214Jy  sigma=1.315681
! Fit after  self-cal, rms=0.082212Jy  sigma=1.315668
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082212Jy  sigma=1.315668
! Fit after  self-cal, rms=0.082244Jy  sigma=1.315266
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.676 mas, bmaj=12.4 mas, bpa=1.07 degrees
! Estimated noise=0.810866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632509 Jy
! Component: 100  -  total flux cleaned = 0.000842417 Jy
! Component: 150  -  total flux cleaned = 0.00104357 Jy
! Component: 200  -  total flux cleaned = 0.00114966 Jy
! Total flux subtracted in 200 components = 0.00114966 Jy
! Clean residual min=-0.002999 max=0.003387 Jy/beam
! Clean residual mean=-0.000010 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.50224 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 162 components and 0.50224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082230Jy  sigma=1.314839
! Fit after  self-cal, rms=0.082235Jy  sigma=1.314813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000205002 Jy
! Component: 100  -  total flux cleaned = 0.000178327 Jy
! Component: 150  -  total flux cleaned = 0.000153364 Jy
! Component: 200  -  total flux cleaned = 0.000107918 Jy
! Total flux subtracted in 200 components = 0.000107918 Jy
! Clean residual min=-0.003006 max=0.003385 Jy/beam
! Clean residual mean=-0.000010 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.502348 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 171 components and 0.502348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082232Jy  sigma=1.314694
! Fit after  self-cal, rms=0.082232Jy  sigma=1.314686
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.215 mas, bpa=-3.781 degrees
! Estimated noise=0.576694 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.812 x 7.215 at -3.781 degrees (North through East)
! Clean map  min=-0.0025976  max=0.39646 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=6.684 mas, bpa=-4.895 degrees
! Estimated noise=0.729311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.307517 Jy
! Component: 100  -  total flux cleaned = 0.37583 Jy
! Component: 150  -  total flux cleaned = 0.40321 Jy
! Component: 200  -  total flux cleaned = 0.420271 Jy
! Total flux subtracted in 200 components = 0.420271 Jy
! Clean residual min=-0.006168 max=0.009609 Jy/beam
! Clean residual mean=-0.000052 rms=0.001748 Jy/beam
! Combined flux in latest and established models = 0.420271 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.420271 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.215 mas, bpa=-3.781 degrees
! Estimated noise=0.576694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175037 Jy
! Component: 100  -  total flux cleaned = 0.0300092 Jy
! Component: 150  -  total flux cleaned = 0.0395669 Jy
! Component: 200  -  total flux cleaned = 0.0470369 Jy
! Total flux subtracted in 200 components = 0.0470369 Jy
! Clean residual min=-0.003807 max=0.004695 Jy/beam
! Clean residual mean=-0.000023 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.467308 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 47 components and 0.467308 Jy
! Inverting map 
! Added new window around map position (-13.5, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00598425 Jy
! Component: 100  -  total flux cleaned = 0.0107714 Jy
! Component: 150  -  total flux cleaned = 0.0146666 Jy
! Component: 200  -  total flux cleaned = 0.0178944 Jy
! Total flux subtracted in 200 components = 0.0178944 Jy
! Clean residual min=-0.002838 max=0.003112 Jy/beam
! Clean residual mean=-0.000013 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.485202 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 79 components and 0.485202 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.676 mas, bmaj=12.4 mas, bpa=1.07 degrees
! Estimated noise=0.810866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00500492 Jy
! Component: 100  -  total flux cleaned = 0.0082969 Jy
! Component: 150  -  total flux cleaned = 0.0107295 Jy
! Component: 200  -  total flux cleaned = 0.0125975 Jy
! Total flux subtracted in 200 components = 0.0125975 Jy
! Clean residual min=-0.002915 max=0.003428 Jy/beam
! Clean residual mean=-0.000016 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.4978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00144861 Jy
! Component: 100  -  total flux cleaned = 0.00258749 Jy
! Component: 150  -  total flux cleaned = 0.00342525 Jy
! Component: 200  -  total flux cleaned = 0.00376076 Jy
! Total flux subtracted in 200 components = 0.00376076 Jy
! Clean residual min=-0.003001 max=0.003450 Jy/beam
! Clean residual mean=-0.000011 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.501561 Jy
! Adding 99 model components to the UV plane model.
! The established model now contains 163 components and 0.501561 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.812 mas, bmaj=7.215 mas, bpa=-3.781 degrees
! Estimated noise=0.576694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452475 Jy
! Component: 100  -  total flux cleaned = -0.00040526 Jy
! Component: 150  -  total flux cleaned = -0.000314189 Jy
! Component: 200  -  total flux cleaned = -0.000189276 Jy
! Total flux subtracted in 200 components = -0.000189276 Jy
! Clean residual min=-0.002474 max=0.002665 Jy/beam
! Clean residual mean=-0.000005 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.501371 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 183 components and 0.501372 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.082139Jy  sigma=1.312315
! Fit after  self-cal, rms=0.082116Jy  sigma=1.311985
wmodel J2230-1325_S_map.mod
! Writing 183 model components to file: J2230-1325_S_map.mod
wobs   J2230-1325_S_uvs.fits
! Writing UV FITS file: J2230-1325_S_uvs.fits
wwins  J2230-1325_S_map.win
! wwins: Wrote 5 windows to J2230-1325_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647006 Jy
! Component: 100  -  total flux cleaned = 0.00110369 Jy
! Component: 150  -  total flux cleaned = 0.00132199 Jy
! Component: 200  -  total flux cleaned = 0.0014067 Jy
! Component: 250  -  total flux cleaned = 0.00140761 Jy
! Component: 300  -  total flux cleaned = 0.00144817 Jy
! Component: 350  -  total flux cleaned = 0.00164333 Jy
! Component: 400  -  total flux cleaned = 0.00175831 Jy
! Component: 450  -  total flux cleaned = 0.00187168 Jy
! Component: 500  -  total flux cleaned = 0.00209283 Jy
! Component: 550  -  total flux cleaned = 0.00230872 Jy
! Component: 600  -  total flux cleaned = 0.00252067 Jy
! Component: 650  -  total flux cleaned = 0.00265954 Jy
! Component: 700  -  total flux cleaned = 0.00272741 Jy
! Component: 750  -  total flux cleaned = 0.00279466 Jy
! Component: 800  -  total flux cleaned = 0.00276175 Jy
! Component: 850  -  total flux cleaned = 0.00276108 Jy
! Component: 900  -  total flux cleaned = 0.00279368 Jy
! Component: 950  -  total flux cleaned = 0.00282544 Jy
! Component: 1000  -  total flux cleaned = 0.00288757 Jy
! Component: 1050  -  total flux cleaned = 0.00288686 Jy
! Component: 1100  -  total flux cleaned = 0.0028254 Jy
! Component: 1150  -  total flux cleaned = 0.00282617 Jy
! Component: 1200  -  total flux cleaned = 0.00282584 Jy
! Component: 1250  -  total flux cleaned = 0.00285476 Jy
! Component: 1300  -  total flux cleaned = 0.00276813 Jy
! Component: 1350  -  total flux cleaned = 0.0028533 Jy
! Component: 1400  -  total flux cleaned = 0.00279674 Jy
! Component: 1450  -  total flux cleaned = 0.0026579 Jy
! Component: 1500  -  total flux cleaned = 0.00271306 Jy
! Component: 1550  -  total flux cleaned = 0.00257722 Jy
! Component: 1600  -  total flux cleaned = 0.00257765 Jy
! Component: 1650  -  total flux cleaned = 0.00257752 Jy
! Component: 1700  -  total flux cleaned = 0.00249918 Jy
! Component: 1750  -  total flux cleaned = 0.00249908 Jy
! Component: 1800  -  total flux cleaned = 0.0024226 Jy
! Component: 1850  -  total flux cleaned = 0.00252375 Jy
! Component: 1900  -  total flux cleaned = 0.00244779 Jy
! Component: 1950  -  total flux cleaned = 0.00239842 Jy
! Component: 2000  -  total flux cleaned = 0.00237365 Jy
! Component: 2050  -  total flux cleaned = 0.00239774 Jy
! Component: 2100  -  total flux cleaned = 0.00230157 Jy
! Component: 2150  -  total flux cleaned = 0.00239632 Jy
! Component: 2200  -  total flux cleaned = 0.00234891 Jy
! Component: 2250  -  total flux cleaned = 0.00221005 Jy
! Component: 2300  -  total flux cleaned = 0.00218696 Jy
! Component: 2350  -  total flux cleaned = 0.00218642 Jy
! Component: 2400  -  total flux cleaned = 0.00214138 Jy
! Component: 2450  -  total flux cleaned = 0.00218579 Jy
! Component: 2500  -  total flux cleaned = 0.00222973 Jy
! Component: 2550  -  total flux cleaned = 0.00222995 Jy
! Component: 2600  -  total flux cleaned = 0.00220852 Jy
! Component: 2650  -  total flux cleaned = 0.00220877 Jy
! Component: 2700  -  total flux cleaned = 0.00225098 Jy
! Component: 2750  -  total flux cleaned = 0.00229306 Jy
! Component: 2800  -  total flux cleaned = 0.00231395 Jy
! Component: 2850  -  total flux cleaned = 0.00229322 Jy
! Component: 2900  -  total flux cleaned = 0.00215047 Jy
! Component: 2950  -  total flux cleaned = 0.00221102 Jy
! Component: 3000  -  total flux cleaned = 0.00223108 Jy
! Component: 3050  -  total flux cleaned = 0.00219122 Jy
! Component: 3100  -  total flux cleaned = 0.0021122 Jy
! Component: 3150  -  total flux cleaned = 0.00221001 Jy
! Component: 3200  -  total flux cleaned = 0.00211285 Jy
! Component: 3250  -  total flux cleaned = 0.00199757 Jy
! Component: 3300  -  total flux cleaned = 0.00205465 Jy
! Component: 3350  -  total flux cleaned = 0.00197897 Jy
! Component: 3400  -  total flux cleaned = 0.00194132 Jy
! Component: 3450  -  total flux cleaned = 0.0018298 Jy
! Component: 3500  -  total flux cleaned = 0.00177444 Jy
! Component: 3550  -  total flux cleaned = 0.00175607 Jy
! Component: 3600  -  total flux cleaned = 0.00159279 Jy
! Component: 3650  -  total flux cleaned = 0.00162878 Jy
! Component: 3700  -  total flux cleaned = 0.00146854 Jy
! Component: 3750  -  total flux cleaned = 0.00153939 Jy
! Component: 3800  -  total flux cleaned = 0.00143386 Jy
! Component: 3850  -  total flux cleaned = 0.00143404 Jy
! Component: 3900  -  total flux cleaned = 0.00136475 Jy
! Component: 3950  -  total flux cleaned = 0.00134747 Jy
! Component: 4000  -  total flux cleaned = 0.00129621 Jy
! Component: 4050  -  total flux cleaned = 0.00129625 Jy
! Total flux subtracted in 4096 components = 0.00122896 Jy
! Clean residual min=-0.000976 max=0.000930 Jy/beam
! Clean residual mean=-0.000004 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.502601 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 465 components and 0.502601 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2230-1325_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.812 x 7.215 at -3.781 degrees (North through East)
! Clean map  min=-0.0017815  max=0.39613 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2230-1325_S_map.fits
wmodel /vlbi/uf001/uva//J2230-1325_S_map.mod
! Writing 465 model components to file: /vlbi/uf001/uva//J2230-1325_S_map.mod
wobs   /vlbi/uf001/uva//J2230-1325_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2230-1325_S_uvs.fits
wwins  /vlbi/uf001/uva//J2230-1325_S_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2230-1325_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.396126 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000302955 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.229438 0.229438 0.458877 0.917753 1.83551 3.67101 7.34202 14.684 29.3681 58.7362
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.396 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1307.54 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2230-1325_S_dfm.log closed on Mon Jan 14 06:17:50 2019