! Started logfile: /vlbi/uf001/uvm//J2229-0832_X_a_dfm.log on Sun Jan 13 22:38:58 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uvm//J2229-0832_X_a_uvm.fits ! Reading UV FITS file: /vlbi/uf001/uvm//J2229-0832_X_a_uvm.fits ! AN table 1: 3 integrations on 21 of 21 possible baselines. ! AN table 2: 19 integrations on 1 of 1 possible baselines. ! AN table 3: 9 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.933579 visibilities/baseline/integration-bin. ! Found source: J2229-0832 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 3036 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2229-0832_X_a] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! A total of 38 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=2.466797Jy sigma=20.326311 ! Fit after self-cal, rms=1.345272Jy sigma=10.647776 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5738 mas, bmaj=1.422 mas, bpa=-1.683 degrees ! Estimated noise=2.7104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79345 Jy ! Component: 100 - total flux cleaned = 2.18454 Jy ! Total flux subtracted in 100 components = 2.18454 Jy ! Clean residual min=-0.189095 max=0.265395 Jy/beam ! Clean residual mean=-0.000036 rms=0.041739 Jy/beam ! Combined flux in latest and established models = 2.18454 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 2.18454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.571711Jy sigma=5.785310 ! Fit after self-cal, rms=0.571713Jy sigma=5.785299 ! Inverting map ! Added new window around map position (2.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215806 Jy ! Component: 100 - total flux cleaned = 0.279832 Jy ! Total flux subtracted in 100 components = 0.279832 Jy ! Clean residual min=-0.174606 max=0.221396 Jy/beam ! Clean residual mean=-0.000022 rms=0.035436 Jy/beam ! Combined flux in latest and established models = 2.46437 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 2.46437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.510804Jy sigma=5.130253 ! Fit after self-cal, rms=0.500256Jy sigma=5.069442 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6729 mas, bmaj=1.627 mas, bpa=0.02417 degrees ! Estimated noise=1.75012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223142 Jy ! Component: 100 - total flux cleaned = 0.293597 Jy ! Component: 150 - total flux cleaned = 0.367862 Jy ! Component: 200 - total flux cleaned = 0.413026 Jy ! Total flux subtracted in 200 components = 0.413026 Jy ! Clean residual min=-0.142142 max=0.144654 Jy/beam ! Clean residual mean=-0.000027 rms=0.030944 Jy/beam ! Combined flux in latest and established models = 2.87739 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 2.87739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.368334Jy sigma=3.386689 ! Fit after self-cal, rms=0.361875Jy sigma=3.321765 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6729 x 1.627 at 0.02417 degrees (North through East) ! Clean map min=-0.12105 max=2.0955 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.86 LA 0.79 MK 0.99 ! NL 1.03 PT 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.99 HN 0.99 MK 1.02 ! NL 1.24 OV 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.87 LA 0.77 MK 1.00 ! NL 1.04 PT 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.99 HN 0.99 MK 1.02 ! NL 1.26 OV 0.89 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.91 LA 0.77 MK 1.00 ! NL 1.05 PT 1.02 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 1.01 HN 0.99 MK 1.03 ! NL 1.24 OV 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 0.88 LA 0.77 MK 1.00 ! NL 1.02 PT 1.02 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 0.96 HN 0.98 MK 1.01 ! NL 1.25 OV 0.92 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.84 LA 0.77 MK 1.01 ! NL 1.04 PT 1.06 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 0.99 HN 1.01 MK 1.01 ! NL 1.23 OV 0.91 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.94 LA 0.75 MK 0.99 ! NL 1.06 PT 1.03 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.96 HN 0.99 MK 1.04 ! NL 1.26 OV 0.92 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.88 LA 0.76 MK 1.02 ! NL 1.03 PT 1.00 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 0.96 HN 0.99 MK 1.02 ! NL 1.29 OV 0.91 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.88 LA 0.75 MK 1.01 ! NL 1.08 PT 1.03 SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.15 FD 0.96 HN 0.98 MK 1.03 ! NL 1.26 OV 0.92 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.87 LA 0.76 MK 1.04 ! NL 1.01 PT 1.04 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.12 FD 0.95 HN 1.00 MK 1.05 ! NL 1.29 OV 0.91 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.84 LA 0.76 MK 1.03 ! NL 1.01 PT 1.01 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 FD 0.96 HN 0.98 MK 1.06 ! NL 1.31 OV 0.90 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.88 LA 0.74 MK 1.00 ! NL 1.05 PT 1.05 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 0.97 HN 1.00 MK 1.06 ! NL 1.34 OV 0.89 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.92 LA 0.74 MK 1.01 ! NL 1.06 PT 1.01 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* MK 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 0.97 HN 0.99 MK 1.08 ! NL 1.32 OV 0.89 SC 1.01 ! ! ! Fit before self-cal, rms=0.361875Jy sigma=3.321765 ! Fit after self-cal, rms=0.178865Jy sigma=1.365409 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6794 mas, bmaj=1.643 mas, bpa=0.409 degrees ! Estimated noise=1.8513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0578037 Jy ! Component: 100 - total flux cleaned = -0.0804256 Jy ! Component: 150 - total flux cleaned = -0.0962606 Jy ! Component: 200 - total flux cleaned = -0.10821 Jy ! Total flux subtracted in 200 components = -0.10821 Jy ! Clean residual min=-0.042967 max=0.043882 Jy/beam ! Clean residual mean=-0.000012 rms=0.009606 Jy/beam ! Combined flux in latest and established models = 2.76918 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 46 components and 2.76918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153717Jy sigma=1.167047 ! Fit after self-cal, rms=0.151320Jy sigma=1.155719 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.151320Jy sigma=1.155719 ! Fit after self-cal, rms=0.147574Jy sigma=1.120959 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6781 mas, bmaj=1.643 mas, bpa=0.4089 degrees ! Estimated noise=1.85087 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0327225 Jy ! Component: 100 - total flux cleaned = -0.047155 Jy ! Component: 150 - total flux cleaned = -0.0498702 Jy ! Component: 200 - total flux cleaned = -0.0492489 Jy ! Total flux subtracted in 200 components = -0.0492489 Jy ! Clean residual min=-0.038338 max=0.038241 Jy/beam ! Clean residual mean=-0.000010 rms=0.008391 Jy/beam ! Combined flux in latest and established models = 2.71994 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 52 components and 2.71994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137052Jy sigma=1.044526 ! Fit after self-cal, rms=0.136293Jy sigma=1.040803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234739 Jy ! Component: 100 - total flux cleaned = -0.00328493 Jy ! Component: 150 - total flux cleaned = -0.00245803 Jy ! Component: 200 - total flux cleaned = -0.00246959 Jy ! Total flux subtracted in 200 components = -0.00246959 Jy ! Clean residual min=-0.036824 max=0.036692 Jy/beam ! Clean residual mean=-0.000009 rms=0.008185 Jy/beam ! Combined flux in latest and established models = 2.71747 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 64 components and 2.71747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133206Jy sigma=1.020086 ! Fit after self-cal, rms=0.133087Jy sigma=1.019206 ! Inverting map ! Added new window around map position (3.2, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283883 Jy ! Component: 100 - total flux cleaned = 0.0247539 Jy ! Component: 150 - total flux cleaned = 0.0195773 Jy ! Component: 200 - total flux cleaned = 0.0148549 Jy ! Total flux subtracted in 200 components = 0.0148549 Jy ! Clean residual min=-0.030366 max=0.034369 Jy/beam ! Clean residual mean=-0.000009 rms=0.006968 Jy/beam ! Combined flux in latest and established models = 2.73232 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 2.73232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122607Jy sigma=0.931091 ! Fit after self-cal, rms=0.121125Jy sigma=0.922225 ! Inverting map ! Added new window around map position (6.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0283783 Jy ! Component: 100 - total flux cleaned = 0.0330051 Jy ! Component: 150 - total flux cleaned = 0.0349343 Jy ! Component: 200 - total flux cleaned = 0.0344244 Jy ! Total flux subtracted in 200 components = 0.0344244 Jy ! Clean residual min=-0.024560 max=0.022357 Jy/beam ! Clean residual mean=-0.000003 rms=0.005580 Jy/beam ! Combined flux in latest and established models = 2.76675 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 96 components and 2.76675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110789Jy sigma=0.839059 ! Fit after self-cal, rms=0.109889Jy sigma=0.833346 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109889Jy sigma=0.833346 ! Fit after self-cal, rms=0.106960Jy sigma=0.811322 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6773 mas, bmaj=1.643 mas, bpa=0.3923 degrees ! Estimated noise=1.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00653033 Jy ! Component: 100 - total flux cleaned = -0.00539145 Jy ! Component: 150 - total flux cleaned = -0.0044586 Jy ! Component: 200 - total flux cleaned = -0.00488962 Jy ! Total flux subtracted in 200 components = -0.00488962 Jy ! Clean residual min=-0.021930 max=0.018399 Jy/beam ! Clean residual mean=-0.000003 rms=0.004731 Jy/beam ! Combined flux in latest and established models = 2.76186 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 2.76186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101238Jy sigma=0.768596 ! Fit after self-cal, rms=0.100915Jy sigma=0.767435 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017949 Jy ! Component: 100 - total flux cleaned = 0.00257493 Jy ! Component: 150 - total flux cleaned = 0.00258164 Jy ! Component: 200 - total flux cleaned = 0.00329716 Jy ! Total flux subtracted in 200 components = 0.00329716 Jy ! Clean residual min=-0.020186 max=0.016799 Jy/beam ! Clean residual mean=-0.000002 rms=0.004444 Jy/beam ! Combined flux in latest and established models = 2.76515 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 2.76515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098141Jy sigma=0.746536 ! Fit after self-cal, rms=0.097947Jy sigma=0.746014 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097947Jy sigma=0.746014 ! Fit after self-cal, rms=0.097046Jy sigma=0.738861 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.603 mas, bmaj=2.973 mas, bpa=11.24 degrees ! Estimated noise=2.80792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467201 Jy ! Component: 100 - total flux cleaned = 0.0121356 Jy ! Component: 150 - total flux cleaned = 0.0126618 Jy ! Component: 200 - total flux cleaned = 0.0126721 Jy ! Total flux subtracted in 200 components = 0.0126721 Jy ! Clean residual min=-0.024089 max=0.021824 Jy/beam ! Clean residual mean=-0.000000 rms=0.006589 Jy/beam ! Combined flux in latest and established models = 2.77783 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 2.77783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094863Jy sigma=0.727673 ! Fit after self-cal, rms=0.094617Jy sigma=0.725296 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00082697 Jy ! Component: 100 - total flux cleaned = 0.00164966 Jy ! Component: 150 - total flux cleaned = 0.00164109 Jy ! Component: 200 - total flux cleaned = 0.0013002 Jy ! Total flux subtracted in 200 components = 0.0013002 Jy ! Clean residual min=-0.022204 max=0.020580 Jy/beam ! Clean residual mean=0.000003 rms=0.006107 Jy/beam ! Combined flux in latest and established models = 2.77913 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 2.77913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093859Jy sigma=0.720374 ! Fit after self-cal, rms=0.093722Jy sigma=0.719078 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.6769 mas, bmaj=1.643 mas, bpa=0.3967 degrees ! Estimated noise=1.85472 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6769 x 1.643 at 0.3967 degrees (North through East) ! Clean map min=-0.053125 max=2.1511 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093722Jy sigma=0.719078 ! Fit after self-cal, rms=0.090014Jy sigma=0.671177 ! Inverting map and beam ! Estimated beam: bmin=0.6765 mas, bmaj=1.641 mas, bpa=0.4967 degrees ! Estimated noise=1.85632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00403211 Jy ! Component: 100 - total flux cleaned = -0.0040333 Jy ! Component: 150 - total flux cleaned = -0.00315293 Jy ! Component: 200 - total flux cleaned = -0.00179449 Jy ! Total flux subtracted in 200 components = -0.00179449 Jy ! Clean residual min=-0.016985 max=0.014069 Jy/beam ! Clean residual mean=-0.000000 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 2.77733 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 147 components and 2.77733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087356Jy sigma=0.650901 ! Fit after self-cal, rms=0.087149Jy sigma=0.650090 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695428 Jy ! Component: 100 - total flux cleaned = 0.000549668 Jy ! Component: 150 - total flux cleaned = 0.000793809 Jy ! Component: 200 - total flux cleaned = 0.00102503 Jy ! Total flux subtracted in 200 components = 0.00102503 Jy ! Clean residual min=-0.016554 max=0.013611 Jy/beam ! Clean residual mean=0.000000 rms=0.003494 Jy/beam ! Combined flux in latest and established models = 2.77836 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 2.77836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085889Jy sigma=0.639861 ! Fit after self-cal, rms=0.085760Jy sigma=0.639465 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085760Jy sigma=0.639465 ! Fit after self-cal, rms=0.085262Jy sigma=0.635139 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5751 mas, bmaj=1.436 mas, bpa=-1.255 degrees ! Estimated noise=2.67836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.76449 Jy ! Component: 100 - total flux cleaned = 2.16388 Jy ! Component: 150 - total flux cleaned = 2.32683 Jy ! Component: 200 - total flux cleaned = 2.39847 Jy ! Total flux subtracted in 200 components = 2.39847 Jy ! Clean residual min=-0.054235 max=0.066198 Jy/beam ! Clean residual mean=-0.000020 rms=0.010738 Jy/beam ! Combined flux in latest and established models = 2.39847 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.39847 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6761 mas, bmaj=1.64 mas, bpa=0.5093 degrees ! Estimated noise=1.85642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871458 Jy ! Component: 100 - total flux cleaned = 0.13922 Jy ! Component: 150 - total flux cleaned = 0.178654 Jy ! Component: 200 - total flux cleaned = 0.202455 Jy ! Total flux subtracted in 200 components = 0.202455 Jy ! Clean residual min=-0.036455 max=0.032545 Jy/beam ! Clean residual mean=-0.000023 rms=0.007763 Jy/beam ! Combined flux in latest and established models = 2.60093 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 2.60093 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.601 mas, bmaj=2.968 mas, bpa=11.37 degrees ! Estimated noise=2.81984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516614 Jy ! Component: 100 - total flux cleaned = 0.0850468 Jy ! Component: 150 - total flux cleaned = 0.111025 Jy ! Component: 200 - total flux cleaned = 0.126523 Jy ! Total flux subtracted in 200 components = 0.126523 Jy ! Clean residual min=-0.038557 max=0.028627 Jy/beam ! Clean residual mean=-0.000038 rms=0.008802 Jy/beam ! Combined flux in latest and established models = 2.72745 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134687 Jy ! Component: 100 - total flux cleaned = 0.0240678 Jy ! Component: 150 - total flux cleaned = 0.0312328 Jy ! Component: 200 - total flux cleaned = 0.0376926 Jy ! Total flux subtracted in 200 components = 0.0376926 Jy ! Clean residual min=-0.029097 max=0.023456 Jy/beam ! Clean residual mean=-0.000023 rms=0.006770 Jy/beam ! Combined flux in latest and established models = 2.76514 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 83 components and 2.76514 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6761 mas, bmaj=1.64 mas, bpa=0.5093 degrees ! Estimated noise=1.85642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00921524 Jy ! Component: 100 - total flux cleaned = -0.00491869 Jy ! Component: 150 - total flux cleaned = 0.00122562 Jy ! Component: 200 - total flux cleaned = 0.00590645 Jy ! Total flux subtracted in 200 components = 0.00590645 Jy ! Clean residual min=-0.020993 max=0.019340 Jy/beam ! Clean residual mean=-0.000005 rms=0.004413 Jy/beam ! Combined flux in latest and established models = 2.77105 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 2.77105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095142Jy sigma=0.749752 ! Fit after self-cal, rms=0.093754Jy sigma=0.732805 wmodel J2229-0832_X_a_map.mod ! Writing 100 model components to file: J2229-0832_X_a_map.mod wobs J2229-0832_X_a_uvs.fits ! Writing UV FITS file: J2229-0832_X_a_uvs.fits wwins J2229-0832_X_a_map.win ! wwins: Wrote 6 windows to J2229-0832_X_a_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00642797 Jy ! Component: 100 - total flux cleaned = -0.00913468 Jy ! Component: 150 - total flux cleaned = -0.0123362 Jy ! Component: 200 - total flux cleaned = -0.0168427 Jy ! Component: 250 - total flux cleaned = -0.0202357 Jy ! Component: 300 - total flux cleaned = -0.0240013 Jy ! Component: 350 - total flux cleaned = -0.0265675 Jy ! Component: 400 - total flux cleaned = -0.029496 Jy ! Component: 450 - total flux cleaned = -0.0315905 Jy ! Component: 500 - total flux cleaned = -0.0340326 Jy ! Component: 550 - total flux cleaned = -0.0355182 Jy ! Component: 600 - total flux cleaned = -0.0375705 Jy ! Component: 650 - total flux cleaned = -0.0389544 Jy ! Component: 700 - total flux cleaned = -0.0406747 Jy ! Component: 750 - total flux cleaned = -0.0421452 Jy ! Component: 800 - total flux cleaned = -0.0432128 Jy ! Component: 850 - total flux cleaned = -0.0437377 Jy ! Component: 900 - total flux cleaned = -0.045074 Jy ! Component: 950 - total flux cleaned = -0.0457163 Jy ! Component: 1000 - total flux cleaned = -0.0461841 Jy ! Component: 1050 - total flux cleaned = -0.046492 Jy ! Component: 1100 - total flux cleaned = -0.046941 Jy ! Component: 1150 - total flux cleaned = -0.0472319 Jy ! Component: 1200 - total flux cleaned = -0.0477996 Jy ! Component: 1250 - total flux cleaned = -0.047797 Jy ! Component: 1300 - total flux cleaned = -0.0475318 Jy ! Component: 1350 - total flux cleaned = -0.0475335 Jy ! Component: 1400 - total flux cleaned = -0.0472776 Jy ! Component: 1450 - total flux cleaned = -0.0471538 Jy ! Component: 1500 - total flux cleaned = -0.0474016 Jy ! Component: 1550 - total flux cleaned = -0.0476402 Jy ! Component: 1600 - total flux cleaned = -0.0475203 Jy ! Component: 1650 - total flux cleaned = -0.0475191 Jy ! Component: 1700 - total flux cleaned = -0.0477456 Jy ! Component: 1750 - total flux cleaned = -0.0480774 Jy ! Component: 1800 - total flux cleaned = -0.047968 Jy ! Component: 1850 - total flux cleaned = -0.0480755 Jy ! Component: 1900 - total flux cleaned = -0.0485971 Jy ! Component: 1950 - total flux cleaned = -0.0490044 Jy ! Component: 2000 - total flux cleaned = -0.0491028 Jy ! Component: 2050 - total flux cleaned = -0.0492987 Jy ! Component: 2100 - total flux cleaned = -0.0493015 Jy ! Component: 2150 - total flux cleaned = -0.0495862 Jy ! Component: 2200 - total flux cleaned = -0.0498646 Jy ! Component: 2250 - total flux cleaned = -0.0503174 Jy ! Component: 2300 - total flux cleaned = -0.050583 Jy ! Component: 2350 - total flux cleaned = -0.0510207 Jy ! Component: 2400 - total flux cleaned = -0.0511072 Jy ! Component: 2450 - total flux cleaned = -0.0511919 Jy ! Component: 2500 - total flux cleaned = -0.0516955 Jy ! Component: 2550 - total flux cleaned = -0.0518596 Jy ! Component: 2600 - total flux cleaned = -0.0518587 Jy ! Component: 2650 - total flux cleaned = -0.0522559 Jy ! Component: 2700 - total flux cleaned = -0.0521788 Jy ! Component: 2750 - total flux cleaned = -0.0526421 Jy ! Component: 2800 - total flux cleaned = -0.052643 Jy ! Component: 2850 - total flux cleaned = -0.052644 Jy ! Component: 2900 - total flux cleaned = -0.0531602 Jy ! Component: 2950 - total flux cleaned = -0.0531595 Jy ! Component: 3000 - total flux cleaned = -0.0536594 Jy ! Component: 3050 - total flux cleaned = -0.0535879 Jy ! Component: 3100 - total flux cleaned = -0.0539356 Jy ! Component: 3150 - total flux cleaned = -0.0540725 Jy ! Component: 3200 - total flux cleaned = -0.0542742 Jy ! Component: 3250 - total flux cleaned = -0.0543416 Jy ! Component: 3300 - total flux cleaned = -0.0544734 Jy ! Component: 3350 - total flux cleaned = -0.054538 Jy ! Component: 3400 - total flux cleaned = -0.054538 Jy ! Component: 3450 - total flux cleaned = -0.0547279 Jy ! Component: 3500 - total flux cleaned = -0.0547906 Jy ! Component: 3550 - total flux cleaned = -0.0549758 Jy ! Component: 3600 - total flux cleaned = -0.0549757 Jy ! Component: 3650 - total flux cleaned = -0.055036 Jy ! Component: 3700 - total flux cleaned = -0.0550368 Jy ! Component: 3750 - total flux cleaned = -0.0550363 Jy ! Component: 3800 - total flux cleaned = -0.0552109 Jy ! Component: 3850 - total flux cleaned = -0.055211 Jy ! Component: 3900 - total flux cleaned = -0.0553806 Jy ! Component: 3950 - total flux cleaned = -0.055324 Jy ! Component: 4000 - total flux cleaned = -0.0553792 Jy ! Component: 4050 - total flux cleaned = -0.0553796 Jy ! Total flux subtracted in 4096 components = -0.0555425 Jy ! Clean residual min=-0.002859 max=0.003507 Jy/beam ! Clean residual mean=-0.000001 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 2.71551 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 367 components and 2.71551 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uvm//J2229-0832_X_a_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6761 x 1.64 at 0.5093 degrees (North through East) ! Clean map min=-0.013959 max=2.1537 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uvm//J2229-0832_X_a_map.fits wmodel /vlbi/uf001/uvm//J2229-0832_X_a_map.mod ! Writing 367 model components to file: /vlbi/uf001/uvm//J2229-0832_X_a_map.mod wobs /vlbi/uf001/uvm//J2229-0832_X_a_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uvm//J2229-0832_X_a_uvs.fits wwins /vlbi/uf001/uvm//J2229-0832_X_a_map.win ! wwins: Wrote 7 windows to /vlbi/uf001/uvm//J2229-0832_X_a_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.15374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000876931 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.12215 0.12215 0.2443 0.488599 0.977198 1.9544 3.90879 7.81758 15.6352 31.2703 62.5407 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.153 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2456 quit ! Quitting program ! Log file /vlbi/uf001/uvm//J2229-0832_X_a_dfm.log closed on Sun Jan 13 22:39:03 2019