! Started logfile: /vlbi/uf001/uva//J2229+0114_X_dfm.log on Mon Jan 14 06:17:39 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2229+0114_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2229+0114_X_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.850877 visibilities/baseline/integration-bin.
! Found source: J2229+0114
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20952 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2229+0114_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 39 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008038Jy  sigma=25.026848
! Fit after  self-cal, rms=0.900609Jy  sigma=22.301443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7248 mas, bmaj=1.658 mas, bpa=1.834 degrees
! Estimated noise=0.332855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0738299 Jy
! Component: 100  -  total flux cleaned = 0.0907822 Jy
! Total flux subtracted in 100 components = 0.0907822 Jy
! Clean residual min=-0.006451 max=0.021396 Jy/beam
! Clean residual mean=-0.000001 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 0.0907822 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0907822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065648Jy  sigma=1.554352
! Fit after  self-cal, rms=0.065544Jy  sigma=1.551585
! Inverting map 
! Added new window around map position (1.4, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174564 Jy
! Component: 100  -  total flux cleaned = 0.0251974 Jy
! Total flux subtracted in 100 components = 0.0251974 Jy
! Clean residual min=-0.004792 max=0.005677 Jy/beam
! Clean residual mean=-0.000000 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.11598 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.11598 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059843Jy  sigma=1.390572
! Fit after  self-cal, rms=0.059258Jy  sigma=1.376312
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00708423 Jy
! Component: 100  -  total flux cleaned = 0.0118675 Jy
! Total flux subtracted in 100 components = 0.0118675 Jy
! Clean residual min=-0.003579 max=0.004170 Jy/beam
! Clean residual mean=-0.000000 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.127847 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 0.127847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057905Jy  sigma=1.335693
! Fit after  self-cal, rms=0.057830Jy  sigma=1.333874
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9022 mas, bmaj=1.929 mas, bpa=1.696 degrees
! Estimated noise=0.202455 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688198 Jy
! Component: 100  -  total flux cleaned = 0.0112403 Jy
! Component: 150  -  total flux cleaned = 0.0143102 Jy
! Component: 200  -  total flux cleaned = 0.0165316 Jy
! Total flux subtracted in 200 components = 0.0165316 Jy
! Clean residual min=-0.003618 max=0.003616 Jy/beam
! Clean residual mean=-0.000001 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.144379 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 54 components and 0.144379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056962Jy  sigma=1.306867
! Fit after  self-cal, rms=0.056916Jy  sigma=1.305502
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9022 x 1.929 at 1.696 degrees (North through East)
! Clean map  min=-0.003467  max=0.099622 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.99     KP        1.04     LA        1.01     
!   MK        1.04     NL        1.11     OV        0.90     PT        0.91     
!   SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.99     KP        1.04     LA        0.97     
!   MK        1.03     NL        1.14     OV        0.89     PT        0.93     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     HN        0.98     KP        1.08     LA        0.97     
!   MK        1.01     NL        1.11     OV        0.90     PT        0.92     
!   SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        0.96     KP        1.04     LA        1.00     
!   MK        0.99     NL        1.10     OV        0.92     PT        0.94     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.00     KP        1.03     LA        0.98     
!   MK        1.04     NL        1.10     OV        0.90     PT        0.93     
!   SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.00     KP        1.06     LA        0.99     
!   MK        1.03     NL        1.10     OV        0.87     PT        0.98     
!   SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.98     KP        1.03     LA        0.97     
!   MK        0.96     NL        1.12     OV        0.90     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.93     KP        1.04     LA        0.98     
!   MK        1.01     NL        1.15     OV        0.90     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.94     KP        1.05     LA        0.99     
!   MK        1.03     NL        1.08     OV        0.89     PT        0.92     
!   SC        0.96     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.97     KP        1.03     LA        0.98     
!   MK        0.99     NL        1.12     OV        0.90     PT        0.92     
!   SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     HN        0.98     KP        1.07     LA        0.95     
!   MK        1.04     NL        1.09     OV        0.92     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.98     KP        1.01     LA        1.05     
!   MK        1.10     NL        1.08     OV        0.90     PT        0.91     
!   SC        0.96     
! 
! 
! Fit before self-cal, rms=0.056916Jy  sigma=1.305502
! Fit after  self-cal, rms=0.055559Jy  sigma=1.282119
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8994 mas, bmaj=1.939 mas, bpa=2.345 degrees
! Estimated noise=0.200706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.6, 13.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121189 Jy
! Component: 100  -  total flux cleaned = 0.00121334 Jy
! Component: 150  -  total flux cleaned = 0.00130183 Jy
! Component: 200  -  total flux cleaned = 0.00137625 Jy
! Total flux subtracted in 200 components = 0.00137625 Jy
! Clean residual min=-0.001505 max=0.001395 Jy/beam
! Clean residual mean=0.000000 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.145755 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 72 components and 0.145755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055454Jy  sigma=1.279438
! Fit after  self-cal, rms=0.055502Jy  sigma=1.278882
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055502Jy  sigma=1.278882
! Fit after  self-cal, rms=0.055937Jy  sigma=1.273024
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8976 mas, bmaj=1.938 mas, bpa=2.454 degrees
! Estimated noise=0.201108 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000732764 Jy
! Component: 100  -  total flux cleaned = 0.000639644 Jy
! Component: 150  -  total flux cleaned = 0.0005843 Jy
! Component: 200  -  total flux cleaned = 0.000540601 Jy
! Total flux subtracted in 200 components = 0.000540601 Jy
! Clean residual min=-0.001068 max=0.001224 Jy/beam
! Clean residual mean=0.000000 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.146296 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 81 components and 0.146296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055902Jy  sigma=1.272077
! Fit after  self-cal, rms=0.055910Jy  sigma=1.271892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000735889 Jy
! Component: 100  -  total flux cleaned = 0.000770064 Jy
! Component: 150  -  total flux cleaned = 0.000839007 Jy
! Component: 200  -  total flux cleaned = 0.000902554 Jy
! Total flux subtracted in 200 components = 0.000902554 Jy
! Clean residual min=-0.001087 max=0.001063 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.147198 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 93 components and 0.147198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055882Jy  sigma=1.271174
! Fit after  self-cal, rms=0.055881Jy  sigma=1.271143
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055881Jy  sigma=1.271143
! Fit after  self-cal, rms=0.055840Jy  sigma=1.270900
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8963 mas, bmaj=1.937 mas, bpa=2.49 degrees
! Estimated noise=0.200886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000268061 Jy
! Component: 100  -  total flux cleaned = 0.000334481 Jy
! Component: 150  -  total flux cleaned = 0.000275181 Jy
! Component: 200  -  total flux cleaned = 0.000256437 Jy
! Total flux subtracted in 200 components = 0.000256437 Jy
! Clean residual min=-0.001027 max=0.001006 Jy/beam
! Clean residual mean=0.000000 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.147455 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 99 components and 0.147454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055824Jy  sigma=1.270487
! Fit after  self-cal, rms=0.055825Jy  sigma=1.270466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.48001e-05 Jy
! Component: 100  -  total flux cleaned = -5.11562e-05 Jy
! Component: 150  -  total flux cleaned = -6.72937e-05 Jy
! Component: 200  -  total flux cleaned = -6.73939e-05 Jy
! Total flux subtracted in 200 components = -6.73939e-05 Jy
! Clean residual min=-0.001032 max=0.000992 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.147387 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 105 components and 0.147387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055815Jy  sigma=1.270248
! Fit after  self-cal, rms=0.055814Jy  sigma=1.270236
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055814Jy  sigma=1.270236
! Fit after  self-cal, rms=0.055810Jy  sigma=1.270188
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.995 mas, bmaj=3.231 mas, bpa=-1.497 degrees
! Estimated noise=0.257434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000186193 Jy
! Component: 100  -  total flux cleaned = 0.000328965 Jy
! Component: 150  -  total flux cleaned = 0.00037498 Jy
! Component: 200  -  total flux cleaned = 0.000405334 Jy
! Total flux subtracted in 200 components = 0.000405334 Jy
! Clean residual min=-0.001030 max=0.000933 Jy/beam
! Clean residual mean=0.000000 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.147792 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 117 components and 0.147792 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055807Jy  sigma=1.270090
! Fit after  self-cal, rms=0.055807Jy  sigma=1.270072
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.17954e-05 Jy
! Component: 100  -  total flux cleaned = 6.15346e-05 Jy
! Component: 150  -  total flux cleaned = 6.12261e-05 Jy
! Component: 200  -  total flux cleaned = 5.26551e-05 Jy
! Total flux subtracted in 200 components = 5.26551e-05 Jy
! Clean residual min=-0.001013 max=0.000895 Jy/beam
! Clean residual mean=0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.147845 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 122 components and 0.147845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055805Jy  sigma=1.270028
! Fit after  self-cal, rms=0.055805Jy  sigma=1.270024
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8957 mas, bmaj=1.937 mas, bpa=2.492 degrees
! Estimated noise=0.200919 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8957 x 1.937 at 2.492 degrees (North through East)
! Clean map  min=-0.00089851  max=0.098443 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7202 mas, bmaj=1.667 mas, bpa=2.667 degrees
! Estimated noise=0.330686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0728497 Jy
! Component: 100  -  total flux cleaned = 0.0981835 Jy
! Component: 150  -  total flux cleaned = 0.1119 Jy
! Component: 200  -  total flux cleaned = 0.119788 Jy
! Total flux subtracted in 200 components = 0.119788 Jy
! Clean residual min=-0.002829 max=0.004159 Jy/beam
! Clean residual mean=-0.000000 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.119788 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.119788 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8957 mas, bmaj=1.937 mas, bpa=2.492 degrees
! Estimated noise=0.200919 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00840944 Jy
! Component: 100  -  total flux cleaned = 0.0134898 Jy
! Component: 150  -  total flux cleaned = 0.0168266 Jy
! Component: 200  -  total flux cleaned = 0.0191974 Jy
! Total flux subtracted in 200 components = 0.0191974 Jy
! Clean residual min=-0.001288 max=0.001983 Jy/beam
! Clean residual mean=-0.000000 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.138986 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 38 components and 0.138986 Jy
! Inverting map 
! Added new window around map position (2.2, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206152 Jy
! Component: 100  -  total flux cleaned = 0.00360217 Jy
! Component: 150  -  total flux cleaned = 0.00467302 Jy
! Component: 200  -  total flux cleaned = 0.00552406 Jy
! Total flux subtracted in 200 components = 0.00552406 Jy
! Clean residual min=-0.001002 max=0.001095 Jy/beam
! Clean residual mean=0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.14451 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 60 components and 0.14451 Jy
! Inverting map 
! Added new window around map position (39.6, -40.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000945468 Jy
! Component: 100  -  total flux cleaned = 0.00159893 Jy
! Component: 150  -  total flux cleaned = 0.0020813 Jy
! Component: 200  -  total flux cleaned = 0.00236031 Jy
! Total flux subtracted in 200 components = 0.00236031 Jy
! Clean residual min=-0.000948 max=0.000910 Jy/beam
! Clean residual mean=0.000000 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.14687 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 74 components and 0.14687 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.995 mas, bmaj=3.231 mas, bpa=-1.497 degrees
! Estimated noise=0.257434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704996 Jy
! Component: 100  -  total flux cleaned = 0.000987508 Jy
! Component: 150  -  total flux cleaned = 0.00112245 Jy
! Component: 200  -  total flux cleaned = 0.00122028 Jy
! Total flux subtracted in 200 components = 0.00122028 Jy
! Clean residual min=-0.000902 max=0.000832 Jy/beam
! Clean residual mean=0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.14809 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106191 Jy
! Component: 100  -  total flux cleaned = 0.000164006 Jy
! Component: 150  -  total flux cleaned = 0.000227406 Jy
! Component: 200  -  total flux cleaned = 0.000286931 Jy
! Total flux subtracted in 200 components = 0.000286931 Jy
! Clean residual min=-0.000895 max=0.000834 Jy/beam
! Clean residual mean=0.000001 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.148377 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 108 components and 0.148377 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8957 mas, bmaj=1.937 mas, bpa=2.492 degrees
! Estimated noise=0.200919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.6303e-05 Jy
! Component: 100  -  total flux cleaned = -8.24001e-05 Jy
! Component: 150  -  total flux cleaned = -4.8078e-05 Jy
! Component: 200  -  total flux cleaned = -6.43597e-05 Jy
! Total flux subtracted in 200 components = -6.43597e-05 Jy
! Clean residual min=-0.000957 max=0.000905 Jy/beam
! Clean residual mean=0.000000 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.148313 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 127 components and 0.148313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055768Jy  sigma=1.269194
! Fit after  self-cal, rms=0.055759Jy  sigma=1.268988
wmodel J2229+0114_X_map.mod
! Writing 127 model components to file: J2229+0114_X_map.mod
wobs   J2229+0114_X_uvs.fits
! Writing UV FITS file: J2229+0114_X_uvs.fits
wwins  J2229+0114_X_map.win
! wwins: Wrote 6 windows to J2229+0114_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000292418 Jy
! Component: 100  -  total flux cleaned = -0.000386278 Jy
! Component: 150  -  total flux cleaned = -0.00043118 Jy
! Component: 200  -  total flux cleaned = -0.000445606 Jy
! Component: 250  -  total flux cleaned = -0.000417199 Jy
! Component: 300  -  total flux cleaned = -0.00041731 Jy
! Component: 350  -  total flux cleaned = -0.000430666 Jy
! Component: 400  -  total flux cleaned = -0.000404018 Jy
! Component: 450  -  total flux cleaned = -0.000430244 Jy
! Component: 500  -  total flux cleaned = -0.000481373 Jy
! Component: 550  -  total flux cleaned = -0.000468796 Jy
! Component: 600  -  total flux cleaned = -0.000505936 Jy
! Component: 650  -  total flux cleaned = -0.000505944 Jy
! Component: 700  -  total flux cleaned = -0.000542353 Jy
! Component: 750  -  total flux cleaned = -0.000566092 Jy
! Component: 800  -  total flux cleaned = -0.00055447 Jy
! Component: 850  -  total flux cleaned = -0.00062411 Jy
! Component: 900  -  total flux cleaned = -0.000635569 Jy
! Component: 950  -  total flux cleaned = -0.000635635 Jy
! Component: 1000  -  total flux cleaned = -0.000691864 Jy
! Component: 1050  -  total flux cleaned = -0.000703054 Jy
! Component: 1100  -  total flux cleaned = -0.000746879 Jy
! Component: 1150  -  total flux cleaned = -0.000757934 Jy
! Component: 1200  -  total flux cleaned = -0.000768804 Jy
! Component: 1250  -  total flux cleaned = -0.000800793 Jy
! Component: 1300  -  total flux cleaned = -0.000800538 Jy
! Component: 1350  -  total flux cleaned = -0.000779699 Jy
! Component: 1400  -  total flux cleaned = -0.000790067 Jy
! Component: 1450  -  total flux cleaned = -0.000790072 Jy
! Component: 1500  -  total flux cleaned = -0.000779918 Jy
! Component: 1550  -  total flux cleaned = -0.000759752 Jy
! Component: 1600  -  total flux cleaned = -0.000739647 Jy
! Component: 1650  -  total flux cleaned = -0.000709982 Jy
! Component: 1700  -  total flux cleaned = -0.000719935 Jy
! Component: 1750  -  total flux cleaned = -0.000710088 Jy
! Component: 1800  -  total flux cleaned = -0.000709954 Jy
! Component: 1850  -  total flux cleaned = -0.00068098 Jy
! Component: 1900  -  total flux cleaned = -0.000671475 Jy
! Component: 1950  -  total flux cleaned = -0.000671528 Jy
! Component: 2000  -  total flux cleaned = -0.00067153 Jy
! Component: 2050  -  total flux cleaned = -0.00068081 Jy
! Component: 2100  -  total flux cleaned = -0.000652853 Jy
! Component: 2150  -  total flux cleaned = -0.000625165 Jy
! Component: 2200  -  total flux cleaned = -0.000625172 Jy
! Component: 2250  -  total flux cleaned = -0.000643362 Jy
! Component: 2300  -  total flux cleaned = -0.000625248 Jy
! Component: 2350  -  total flux cleaned = -0.000616276 Jy
! Component: 2400  -  total flux cleaned = -0.000616347 Jy
! Component: 2450  -  total flux cleaned = -0.000625108 Jy
! Component: 2500  -  total flux cleaned = -0.000633801 Jy
! Component: 2550  -  total flux cleaned = -0.000572743 Jy
! Component: 2600  -  total flux cleaned = -0.000581492 Jy
! Component: 2650  -  total flux cleaned = -0.000581453 Jy
! Component: 2700  -  total flux cleaned = -0.000598595 Jy
! Component: 2750  -  total flux cleaned = -0.000556098 Jy
! Component: 2800  -  total flux cleaned = -0.000572859 Jy
! Component: 2850  -  total flux cleaned = -0.000556104 Jy
! Component: 2900  -  total flux cleaned = -0.000514387 Jy
! Component: 2950  -  total flux cleaned = -0.000539183 Jy
! Component: 3000  -  total flux cleaned = -0.000522644 Jy
! Component: 3050  -  total flux cleaned = -0.000530899 Jy
! Component: 3100  -  total flux cleaned = -0.000547113 Jy
! Component: 3150  -  total flux cleaned = -0.000530931 Jy
! Component: 3200  -  total flux cleaned = -0.00057916 Jy
! Component: 3250  -  total flux cleaned = -0.000587107 Jy
! Component: 3300  -  total flux cleaned = -0.000547353 Jy
! Component: 3350  -  total flux cleaned = -0.000586903 Jy
! Component: 3400  -  total flux cleaned = -0.000602624 Jy
! Component: 3450  -  total flux cleaned = -0.000587016 Jy
! Component: 3500  -  total flux cleaned = -0.000602617 Jy
! Component: 3550  -  total flux cleaned = -0.000618085 Jy
! Component: 3600  -  total flux cleaned = -0.000610359 Jy
! Component: 3650  -  total flux cleaned = -0.000610417 Jy
! Component: 3700  -  total flux cleaned = -0.000633205 Jy
! Component: 3750  -  total flux cleaned = -0.000602934 Jy
! Component: 3800  -  total flux cleaned = -0.000580376 Jy
! Component: 3850  -  total flux cleaned = -0.000617871 Jy
! Component: 3900  -  total flux cleaned = -0.000632784 Jy
! Component: 3950  -  total flux cleaned = -0.00061789 Jy
! Component: 4000  -  total flux cleaned = -0.000632679 Jy
! Component: 4050  -  total flux cleaned = -0.000625353 Jy
! Total flux subtracted in 4096 components = -0.000618017 Jy
! Clean residual min=-0.000488 max=0.000431 Jy/beam
! Clean residual mean=0.000000 rms=0.000124 Jy/beam
! Combined flux in latest and established models = 0.147695 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 422 components and 0.147695 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2229+0114_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8957 x 1.937 at 2.492 degrees (North through East)
! Clean map  min=-0.00067655  max=0.098071 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2229+0114_X_map.fits
wmodel /vlbi/uf001/uva//J2229+0114_X_map.mod
! Writing 422 model components to file: /vlbi/uf001/uva//J2229+0114_X_map.mod
wobs   /vlbi/uf001/uva//J2229+0114_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2229+0114_X_uvs.fits
wwins  /vlbi/uf001/uva//J2229+0114_X_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J2229+0114_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.098071 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000123265 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.377069 0.377069 0.754138 1.50828 3.01655 6.03311 12.0662 24.1324 48.2648 96.5297
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.098 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  795.61 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2229+0114_X_dfm.log closed on Mon Jan 14 06:17:45 2019