! Started logfile: /vlbi/uf001/uvm//J2224+6016_S_a_dfm.log on Sun Jan 13 22:38:01 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uvm//J2224+6016_S_a_uvm.fits
! Reading UV FITS file: /vlbi/uf001/uvm//J2224+6016_S_a_uvm.fits
! AN table 1: 149 integrations on 10 of 10 possible baselines.
! AN table 2: 148 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.713204 visibilities/baseline/integration-bin.
! Found source: J2224+6016
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5088 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2224+6016_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 123 telescope corrections were flagged in sub-array 1.
!  A total of 89 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 123 telescope corrections were flagged in sub-array 1.
!  A total of 89 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 123 telescope corrections were flagged in sub-array 1.
!  A total of 89 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000417Jy  sigma=22.034321
! Fit after  self-cal, rms=0.926989Jy  sigma=20.465611
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=18.92 mas, bmaj=28.91 mas, bpa=-31.18 degrees
! Estimated noise=0.787203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0545203 Jy
! Component: 100  -  total flux cleaned = 0.0790743 Jy
! Total flux subtracted in 100 components = 0.0790743 Jy
! Clean residual min=-0.011109 max=0.013388 Jy/beam
! Clean residual mean=-0.000682 rms=0.004540 Jy/beam
! Combined flux in latest and established models = 0.0790743 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 58 components and 0.0790743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.067552Jy  sigma=1.444128
! Fit after  self-cal, rms=0.066851Jy  sigma=1.429138
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.2 mas, bmaj=27.08 mas, bpa=-55.75 degrees
! Estimated noise=0.461912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233892 Jy
! Component: 100  -  total flux cleaned = 0.0396558 Jy
! Component: 150  -  total flux cleaned = 0.052117 Jy
! Component: 200  -  total flux cleaned = 0.0619565 Jy
! Total flux subtracted in 200 components = 0.0619565 Jy
! Clean residual min=-0.007356 max=0.007301 Jy/beam
! Clean residual mean=-0.000772 rms=0.003233 Jy/beam
! Combined flux in latest and established models = 0.141031 Jy
! Performing phase self-cal
! Adding 169 model components to the UV plane model.
! The established model now contains 224 components and 0.141031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.055189Jy  sigma=1.168903
! Fit after  self-cal, rms=0.054925Jy  sigma=1.159712
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.2 x 27.08 at -55.75 degrees (North through East)
! Clean map  min=-0.0074879  max=0.078026 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.25     KP        1.17     LA        0.93     OV        1.20     
!   PT        0.82     
! 
!  A total of 219 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.30     KP        1.20     LA        0.88     PT        0.79     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.23     KP        1.13     LA        0.90     OV        1.10     
!   PT        0.88     
! 
!  A total of 219 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.22     KP        1.20     LA        0.85     PT        0.78     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        1.08     LA        0.93     OV        1.25     
!   PT        0.85     
! 
!  A total of 219 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.21     KP        1.16     LA        0.83     PT        0.78     
! 
! 
! Fit before self-cal, rms=0.054925Jy  sigma=1.159712
! Fit after  self-cal, rms=0.056608Jy  sigma=1.101938
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=24.44 mas, bmaj=27.22 mas, bpa=-51.67 degrees
! Estimated noise=0.502308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109314 Jy
! Component: 100  -  total flux cleaned = 0.00140875 Jy
! Component: 150  -  total flux cleaned = 0.00159703 Jy
! Component: 200  -  total flux cleaned = 0.00176701 Jy
! Total flux subtracted in 200 components = 0.00176701 Jy
! Clean residual min=-0.004245 max=0.004623 Jy/beam
! Clean residual mean=-0.000206 rms=0.001261 Jy/beam
! Combined flux in latest and established models = 0.142798 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 248 components and 0.142798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056577Jy  sigma=1.101064
! Fit after  self-cal, rms=0.057094Jy  sigma=1.097692
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057094Jy  sigma=1.097692
! Fit after  self-cal, rms=0.057370Jy  sigma=1.074342
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.28 mas, bmaj=27.16 mas, bpa=-51.16 degrees
! Estimated noise=0.503703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001011 Jy
! Component: 100  -  total flux cleaned = 0.00104014 Jy
! Component: 150  -  total flux cleaned = 0.00103986 Jy
! Component: 200  -  total flux cleaned = 0.00101904 Jy
! Total flux subtracted in 200 components = 0.00101904 Jy
! Clean residual min=-0.002093 max=0.001952 Jy/beam
! Clean residual mean=0.000016 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.143817 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 267 components and 0.143817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057332Jy  sigma=1.073894
! Fit after  self-cal, rms=0.057452Jy  sigma=1.073085
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000215274 Jy
! Component: 100  -  total flux cleaned = 0.000174723 Jy
! Component: 150  -  total flux cleaned = 0.000211075 Jy
! Component: 200  -  total flux cleaned = 0.000259514 Jy
! Total flux subtracted in 200 components = 0.000259514 Jy
! Clean residual min=-0.002046 max=0.002022 Jy/beam
! Clean residual mean=0.000013 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.144076 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 282 components and 0.144076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057434Jy  sigma=1.072886
! Fit after  self-cal, rms=0.057440Jy  sigma=1.072830
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057440Jy  sigma=1.072830
! Fit after  self-cal, rms=0.056919Jy  sigma=1.072427
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.06 mas, bmaj=27.04 mas, bpa=-47.77 degrees
! Estimated noise=0.499687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000704637 Jy
! Component: 100  -  total flux cleaned = 0.000876841 Jy
! Component: 150  -  total flux cleaned = 0.000934755 Jy
! Component: 200  -  total flux cleaned = 0.000949256 Jy
! Total flux subtracted in 200 components = 0.000949256 Jy
! Clean residual min=-0.001901 max=0.001770 Jy/beam
! Clean residual mean=0.000020 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.145026 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 290 components and 0.145026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056891Jy  sigma=1.072113
! Fit after  self-cal, rms=0.056921Jy  sigma=1.072016
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000203377 Jy
! Component: 100  -  total flux cleaned = 0.000134912 Jy
! Component: 150  -  total flux cleaned = 0.000104621 Jy
! Component: 200  -  total flux cleaned = 0.000118138 Jy
! Total flux subtracted in 200 components = 0.000118138 Jy
! Clean residual min=-0.001933 max=0.001796 Jy/beam
! Clean residual mean=0.000021 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.145144 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 297 components and 0.145144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056910Jy  sigma=1.071871
! Fit after  self-cal, rms=0.056910Jy  sigma=1.071834
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056910Jy  sigma=1.071834
! Fit after  self-cal, rms=0.056308Jy  sigma=1.071603
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.49 mas, bmaj=27.15 mas, bpa=-48.07 degrees
! Estimated noise=0.494139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000623752 Jy
! Component: 100  -  total flux cleaned = 0.000788128 Jy
! Component: 150  -  total flux cleaned = 0.000862319 Jy
! Component: 200  -  total flux cleaned = 0.000935548 Jy
! Total flux subtracted in 200 components = 0.000935548 Jy
! Clean residual min=-0.001716 max=0.001668 Jy/beam
! Clean residual mean=0.000020 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.146079 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 310 components and 0.146079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056287Jy  sigma=1.071363
! Fit after  self-cal, rms=0.056297Jy  sigma=1.071312
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137038 Jy
! Component: 100  -  total flux cleaned = 9.7695e-05 Jy
! Component: 150  -  total flux cleaned = 8.61572e-05 Jy
! Component: 200  -  total flux cleaned = 9.71524e-05 Jy
! Total flux subtracted in 200 components = 9.71524e-05 Jy
! Clean residual min=-0.001755 max=0.001709 Jy/beam
! Clean residual mean=0.000021 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.146176 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 322 components and 0.146177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056289Jy  sigma=1.071208
! Fit after  self-cal, rms=0.056289Jy  sigma=1.071188
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=23.85 mas, bmaj=26.94 mas, bpa=-44.93 degrees
! Estimated noise=0.495489 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.85 x 26.94 at -44.93 degrees (North through East)
! Clean map  min=-0.0018737  max=0.074086 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.18 mas, bmaj=30.41 mas, bpa=-27.7 degrees
! Estimated noise=0.867161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0579326 Jy
! Component: 100  -  total flux cleaned = 0.0846991 Jy
! Component: 150  -  total flux cleaned = 0.101684 Jy
! Component: 200  -  total flux cleaned = 0.112752 Jy
! Total flux subtracted in 200 components = 0.112752 Jy
! Clean residual min=-0.006328 max=0.006045 Jy/beam
! Clean residual mean=-0.000236 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 0.112752 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 95 model components to the UV plane model.
! The established model now contains 95 components and 0.112752 Jy
! Inverting map and beam 
! Estimated beam: bmin=23.85 mas, bmaj=26.94 mas, bpa=-44.93 degrees
! Estimated noise=0.495489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00843326 Jy
! Component: 100  -  total flux cleaned = 0.0141912 Jy
! Component: 150  -  total flux cleaned = 0.018512 Jy
! Component: 200  -  total flux cleaned = 0.0217947 Jy
! Total flux subtracted in 200 components = 0.0217947 Jy
! Clean residual min=-0.002721 max=0.001899 Jy/beam
! Clean residual mean=-0.000135 rms=0.000950 Jy/beam
! Combined flux in latest and established models = 0.134547 Jy
! Adding 128 model components to the UV plane model.
! The established model now contains 223 components and 0.134547 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.49 mas, bmaj=27.15 mas, bpa=-48.07 degrees
! Estimated noise=0.494139 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00258303 Jy
! Component: 100  -  total flux cleaned = 0.00459636 Jy
! Component: 150  -  total flux cleaned = 0.00617229 Jy
! Component: 200  -  total flux cleaned = 0.00740846 Jy
! Total flux subtracted in 200 components = 0.00740846 Jy
! Clean residual min=-0.001910 max=0.001440 Jy/beam
! Clean residual mean=-0.000039 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.141955 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000972 Jy
! Component: 100  -  total flux cleaned = 0.00173756 Jy
! Component: 150  -  total flux cleaned = 0.00234242 Jy
! Component: 200  -  total flux cleaned = 0.00282099 Jy
! Total flux subtracted in 200 components = 0.00282099 Jy
! Clean residual min=-0.001670 max=0.001511 Jy/beam
! Clean residual mean=-0.000001 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.144776 Jy
! Adding 97 model components to the UV plane model.
! The established model now contains 311 components and 0.144776 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=23.85 mas, bmaj=26.94 mas, bpa=-44.93 degrees
! Estimated noise=0.495489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038694 Jy
! Component: 100  -  total flux cleaned = 0.000659056 Jy
! Component: 150  -  total flux cleaned = 0.000765245 Jy
! Component: 200  -  total flux cleaned = 0.000852247 Jy
! Total flux subtracted in 200 components = 0.000852247 Jy
! Clean residual min=-0.001619 max=0.001547 Jy/beam
! Clean residual mean=0.000010 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.145628 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 324 components and 0.145628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056280Jy  sigma=1.071015
! Fit after  self-cal, rms=0.056285Jy  sigma=1.070730
wmodel J2224+6016_S_a_map.mod
! Writing 324 model components to file: J2224+6016_S_a_map.mod
wobs   J2224+6016_S_a_uvs.fits
! Writing UV FITS file: J2224+6016_S_a_uvs.fits
wwins  J2224+6016_S_a_map.win
! wwins: Wrote 1 windows to J2224+6016_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 9.93767e-06 Jy
! Component: 100  -  total flux cleaned = 3.88598e-05 Jy
! Component: 150  -  total flux cleaned = -2.25952e-05 Jy
! Component: 200  -  total flux cleaned = -9.48469e-05 Jy
! Component: 250  -  total flux cleaned = -0.000256055 Jy
! Component: 300  -  total flux cleaned = -0.000433352 Jy
! Component: 350  -  total flux cleaned = -0.000583275 Jy
! Component: 400  -  total flux cleaned = -0.000710043 Jy
! Component: 450  -  total flux cleaned = -0.00084169 Jy
! Component: 500  -  total flux cleaned = -0.000965878 Jy
! Component: 550  -  total flux cleaned = -0.00106133 Jy
! Component: 600  -  total flux cleaned = -0.00109195 Jy
! Component: 650  -  total flux cleaned = -0.00110179 Jy
! Component: 700  -  total flux cleaned = -0.00111103 Jy
! Component: 750  -  total flux cleaned = -0.00113762 Jy
! Component: 800  -  total flux cleaned = -0.00114623 Jy
! Component: 850  -  total flux cleaned = -0.00117962 Jy
! Component: 900  -  total flux cleaned = -0.0011955 Jy
! Component: 950  -  total flux cleaned = -0.0011877 Jy
! Component: 1000  -  total flux cleaned = -0.00118762 Jy
! Component: 1050  -  total flux cleaned = -0.00118033 Jy
! Component: 1100  -  total flux cleaned = -0.00117327 Jy
! Component: 1150  -  total flux cleaned = -0.00115248 Jy
! Component: 1200  -  total flux cleaned = -0.00113878 Jy
! Component: 1250  -  total flux cleaned = -0.0011119 Jy
! Component: 1300  -  total flux cleaned = -0.00108564 Jy
! Component: 1350  -  total flux cleaned = -0.00106632 Jy
! Component: 1400  -  total flux cleaned = -0.00103466 Jy
! Component: 1450  -  total flux cleaned = -0.000985192 Jy
! Component: 1500  -  total flux cleaned = -0.000966946 Jy
! Component: 1550  -  total flux cleaned = -0.000948921 Jy
! Component: 1600  -  total flux cleaned = -0.000948845 Jy
! Component: 1650  -  total flux cleaned = -0.000942991 Jy
! Component: 1700  -  total flux cleaned = -0.000937181 Jy
! Component: 1750  -  total flux cleaned = -0.000931425 Jy
! Component: 1800  -  total flux cleaned = -0.000914635 Jy
! Component: 1850  -  total flux cleaned = -0.000892589 Jy
! Component: 1900  -  total flux cleaned = -0.000881723 Jy
! Component: 1950  -  total flux cleaned = -0.00086566 Jy
! Component: 2000  -  total flux cleaned = -0.00086563 Jy
! Component: 2050  -  total flux cleaned = -0.000844519 Jy
! Component: 2100  -  total flux cleaned = -0.000834006 Jy
! Component: 2150  -  total flux cleaned = -0.000818478 Jy
! Component: 2200  -  total flux cleaned = -0.000818495 Jy
! Component: 2250  -  total flux cleaned = -0.000808346 Jy
! Component: 2300  -  total flux cleaned = -0.000818455 Jy
! Component: 2350  -  total flux cleaned = -0.000823414 Jy
! Component: 2400  -  total flux cleaned = -0.000813479 Jy
! Component: 2450  -  total flux cleaned = -0.000813485 Jy
! Component: 2500  -  total flux cleaned = -0.000803627 Jy
! Component: 2550  -  total flux cleaned = -0.000774087 Jy
! Component: 2600  -  total flux cleaned = -0.000759341 Jy
! Component: 2650  -  total flux cleaned = -0.00074953 Jy
! Component: 2700  -  total flux cleaned = -0.000744557 Jy
! Component: 2750  -  total flux cleaned = -0.000744519 Jy
! Component: 2800  -  total flux cleaned = -0.0007645 Jy
! Component: 2850  -  total flux cleaned = -0.000774572 Jy
! Component: 2900  -  total flux cleaned = -0.000784718 Jy
! Component: 2950  -  total flux cleaned = -0.000800046 Jy
! Component: 3000  -  total flux cleaned = -0.000820667 Jy
! Component: 3050  -  total flux cleaned = -0.00082577 Jy
! Component: 3100  -  total flux cleaned = -0.000825698 Jy
! Component: 3150  -  total flux cleaned = -0.000820366 Jy
! Component: 3200  -  total flux cleaned = -0.000814939 Jy
! Component: 3250  -  total flux cleaned = -0.000814939 Jy
! Component: 3300  -  total flux cleaned = -0.00081497 Jy
! Component: 3350  -  total flux cleaned = -0.000803811 Jy
! Component: 3400  -  total flux cleaned = -0.000798162 Jy
! Component: 3450  -  total flux cleaned = -0.000792375 Jy
! Component: 3500  -  total flux cleaned = -0.000798037 Jy
! Component: 3550  -  total flux cleaned = -0.000798032 Jy
! Component: 3600  -  total flux cleaned = -0.000803997 Jy
! Component: 3650  -  total flux cleaned = -0.000803971 Jy
! Component: 3700  -  total flux cleaned = -0.000797689 Jy
! Component: 3750  -  total flux cleaned = -0.000803967 Jy
! Component: 3800  -  total flux cleaned = -0.00079751 Jy
! Component: 3850  -  total flux cleaned = -0.000797449 Jy
! Component: 3900  -  total flux cleaned = -0.000804265 Jy
! Component: 3950  -  total flux cleaned = -0.000797314 Jy
! Component: 4000  -  total flux cleaned = -0.000797436 Jy
! Component: 4050  -  total flux cleaned = -0.000797373 Jy
! Total flux subtracted in 4096 components = -0.00079741 Jy
! Clean residual min=-0.000408 max=0.000411 Jy/beam
! Clean residual mean=-0.000010 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.144831 Jy
keep
! Adding 507 model components to the UV plane model.
! The established model now contains 831 components and 0.144831 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uvm//J2224+6016_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.85 x 26.94 at -44.93 degrees (North through East)
! Clean map  min=-0.0010625  max=0.073849 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uvm//J2224+6016_S_a_map.fits
wmodel /vlbi/uf001/uvm//J2224+6016_S_a_map.mod
! Writing 831 model components to file: /vlbi/uf001/uvm//J2224+6016_S_a_map.mod
wobs   /vlbi/uf001/uvm//J2224+6016_S_a_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uvm//J2224+6016_S_a_uvs.fits
wwins  /vlbi/uf001/uvm//J2224+6016_S_a_map.win
! wwins: Wrote 2 windows to /vlbi/uf001/uvm//J2224+6016_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0738491 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166063 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.674602 0.674602 1.3492 2.69841 5.39682 10.7936 21.5873 43.1746 86.3491
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  444.706 
quit
! Quitting program
! Log file /vlbi/uf001/uvm//J2224+6016_S_a_dfm.log closed on Sun Jan 13 22:38:06 2019