! Started logfile: /vlbi/uf001/uva//J2223+6249_X_dfm.log on Mon Jan 14 06:15:28 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2223+6249_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2223+6249_X_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.93736 visibilities/baseline/integration-bin. ! Found source: J2223+6249 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 75420 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2223+6249_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025216Jy sigma=24.178093 ! Fit after self-cal, rms=0.829153Jy sigma=19.567589 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7212 mas, bmaj=0.9291 mas, bpa=-0.2965 degrees ! Estimated noise=0.270558 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110726 Jy ! Component: 100 - total flux cleaned = 0.154945 Jy ! Total flux subtracted in 100 components = 0.154945 Jy ! Clean residual min=-0.006734 max=0.022034 Jy/beam ! Clean residual mean=-0.000043 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.154946 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.154946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085733Jy sigma=1.989924 ! Fit after self-cal, rms=0.085688Jy sigma=1.988776 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264179 Jy ! Component: 100 - total flux cleaned = 0.0438083 Jy ! Total flux subtracted in 100 components = 0.0438083 Jy ! Clean residual min=-0.005422 max=0.018734 Jy/beam ! Clean residual mean=-0.000030 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.198754 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.198754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069381Jy sigma=1.597998 ! Fit after self-cal, rms=0.069360Jy sigma=1.597354 ! Inverting map ! Added new window around map position (0.2, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01725 Jy ! Component: 100 - total flux cleaned = 0.0281951 Jy ! Total flux subtracted in 100 components = 0.0281951 Jy ! Clean residual min=-0.004979 max=0.006348 Jy/beam ! Clean residual mean=-0.000022 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.226949 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.226949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061680Jy sigma=1.412167 ! Fit after self-cal, rms=0.061376Jy sigma=1.405113 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906376 Jy ! Component: 100 - total flux cleaned = 0.0158795 Jy ! Total flux subtracted in 100 components = 0.0158795 Jy ! Clean residual min=-0.003839 max=0.005404 Jy/beam ! Clean residual mean=-0.000017 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.242828 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.242828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058520Jy sigma=1.337294 ! Fit after self-cal, rms=0.058472Jy sigma=1.336223 ! Inverting map ! Added new window around map position (-0.8, -2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615807 Jy ! Component: 100 - total flux cleaned = 0.0110281 Jy ! Total flux subtracted in 100 components = 0.0110281 Jy ! Clean residual min=-0.003577 max=0.004502 Jy/beam ! Clean residual mean=-0.000014 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.253857 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.253856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057048Jy sigma=1.302283 ! Fit after self-cal, rms=0.057019Jy sigma=1.301632 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9651 mas, bmaj=1.239 mas, bpa=-1.837 degrees ! Estimated noise=0.112171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008099 Jy ! Component: 100 - total flux cleaned = 0.0137802 Jy ! Component: 150 - total flux cleaned = 0.0180306 Jy ! Component: 200 - total flux cleaned = 0.0212475 Jy ! Total flux subtracted in 200 components = 0.0212475 Jy ! Clean residual min=-0.003536 max=0.004797 Jy/beam ! Clean residual mean=-0.000026 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.275104 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 68 components and 0.275104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055492Jy sigma=1.266078 ! Fit after self-cal, rms=0.055435Jy sigma=1.264824 ! Inverting map ! Added new window around map position (-2, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00441477 Jy ! Component: 100 - total flux cleaned = 0.00715036 Jy ! Component: 150 - total flux cleaned = 0.00927223 Jy ! Component: 200 - total flux cleaned = 0.0105017 Jy ! Total flux subtracted in 200 components = 0.0105017 Jy ! Clean residual min=-0.003453 max=0.003959 Jy/beam ! Clean residual mean=-0.000018 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.285606 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.285606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055016Jy sigma=1.254402 ! Fit after self-cal, rms=0.054980Jy sigma=1.253686 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9651 x 1.239 at -1.837 degrees (North through East) ! Clean map min=-0.0031874 max=0.16193 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 0.99 KP 1.03 ! LA 1.02 MK 1.09 NL 1.11 OV 0.92 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.03 ! LA 1.02 MK 1.10 NL 1.10 OV 0.93 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.03 ! LA 1.02 MK 1.10 NL 1.11 OV 0.92 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.97 KP 1.03 ! LA 1.02 MK 1.10 NL 1.11 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.97 KP 1.04 ! LA 1.01 MK 1.06 NL 1.11 OV 0.92 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.98 KP 1.02 ! LA 1.01 MK 1.06 NL 1.10 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 0.96 KP 1.02 ! LA 1.03 MK 1.06 NL 1.10 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.97 KP 1.03 ! LA 1.01 MK 1.05 NL 1.10 OV 0.92 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.94 KP 1.02 ! LA 1.01 MK 1.01 NL 1.11 OV 0.91 ! PT 0.91 SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 0.95 KP 1.02 ! LA 1.02 MK 1.02 NL 1.10 OV 0.90 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.95 KP 1.03 ! LA 1.03 MK 1.00 NL 1.09 OV 0.90 ! PT 0.93 SC 0.95 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.95 KP 1.02 ! LA 1.00 MK 0.98 NL 1.10 OV 0.90 ! PT 0.92 SC 0.92 ! ! ! Fit before self-cal, rms=0.054980Jy sigma=1.253686 ! Fit after self-cal, rms=0.052690Jy sigma=1.196799 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9675 mas, bmaj=1.242 mas, bpa=-1.129 degrees ! Estimated noise=0.113042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233104 Jy ! Component: 100 - total flux cleaned = -0.00270394 Jy ! Component: 150 - total flux cleaned = -0.00303624 Jy ! Component: 200 - total flux cleaned = -0.00327862 Jy ! Total flux subtracted in 200 components = -0.00327862 Jy ! Clean residual min=-0.001278 max=0.001224 Jy/beam ! Clean residual mean=-0.000007 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.282327 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.282327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052565Jy sigma=1.193661 ! Fit after self-cal, rms=0.052580Jy sigma=1.193189 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052580Jy sigma=1.193189 ! Fit after self-cal, rms=0.052340Jy sigma=1.188426 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=1.241 mas, bpa=-0.8515 degrees ! Estimated noise=0.112976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012656 Jy ! Component: 100 - total flux cleaned = -0.00169338 Jy ! Component: 150 - total flux cleaned = -0.00191379 Jy ! Component: 200 - total flux cleaned = -0.00202268 Jy ! Total flux subtracted in 200 components = -0.00202268 Jy ! Clean residual min=-0.000896 max=0.001051 Jy/beam ! Clean residual mean=-0.000002 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.280305 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.280305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052290Jy sigma=1.187274 ! Fit after self-cal, rms=0.052288Jy sigma=1.187177 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746506 Jy ! Component: 100 - total flux cleaned = 0.000663421 Jy ! Component: 150 - total flux cleaned = 0.000592046 Jy ! Component: 200 - total flux cleaned = 0.000571773 Jy ! Total flux subtracted in 200 components = 0.000571773 Jy ! Clean residual min=-0.000783 max=0.000896 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.280876 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 0.280876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052257Jy sigma=1.186436 ! Fit after self-cal, rms=0.052253Jy sigma=1.186342 ! Inverting map ! Added new window around map position (0.6, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509723 Jy ! Component: 100 - total flux cleaned = 0.000682661 Jy ! Component: 150 - total flux cleaned = 0.00072644 Jy ! Component: 200 - total flux cleaned = 0.000785717 Jy ! Total flux subtracted in 200 components = 0.000785717 Jy ! Clean residual min=-0.000715 max=0.000725 Jy/beam ! Clean residual mean=-0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.281662 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 135 components and 0.281662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052232Jy sigma=1.185848 ! Fit after self-cal, rms=0.052230Jy sigma=1.185816 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052230Jy sigma=1.185816 ! Fit after self-cal, rms=0.052136Jy sigma=1.185604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9649 mas, bmaj=1.24 mas, bpa=-0.9152 degrees ! Estimated noise=0.112892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000352807 Jy ! Component: 100 - total flux cleaned = -0.000352867 Jy ! Component: 150 - total flux cleaned = -0.000351979 Jy ! Component: 200 - total flux cleaned = -0.000370296 Jy ! Total flux subtracted in 200 components = -0.000370296 Jy ! Clean residual min=-0.000644 max=0.000691 Jy/beam ! Clean residual mean=-0.000000 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.281292 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 140 components and 0.281292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052119Jy sigma=1.185221 ! Fit after self-cal, rms=0.052117Jy sigma=1.185196 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.84698e-05 Jy ! Component: 100 - total flux cleaned = -3.18132e-05 Jy ! Component: 150 - total flux cleaned = -1.63141e-05 Jy ! Component: 200 - total flux cleaned = -2.01928e-06 Jy ! Total flux subtracted in 200 components = -2.01928e-06 Jy ! Clean residual min=-0.000622 max=0.000659 Jy/beam ! Clean residual mean=-0.000000 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.28129 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 144 components and 0.28129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052107Jy sigma=1.184983 ! Fit after self-cal, rms=0.052107Jy sigma=1.184977 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052107Jy sigma=1.184977 ! Fit after self-cal, rms=0.052056Jy sigma=1.184911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.258 mas, bmaj=2.369 mas, bpa=7.922 degrees ! Estimated noise=0.149379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250222 Jy ! Component: 100 - total flux cleaned = -0.000299552 Jy ! Component: 150 - total flux cleaned = -0.000354878 Jy ! Component: 200 - total flux cleaned = -0.000402216 Jy ! Total flux subtracted in 200 components = -0.000402216 Jy ! Clean residual min=-0.000659 max=0.000852 Jy/beam ! Clean residual mean=-0.000001 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.280888 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 160 components and 0.280888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052052Jy sigma=1.184827 ! Fit after self-cal, rms=0.052051Jy sigma=1.184814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79392e-05 Jy ! Component: 100 - total flux cleaned = 3.80706e-06 Jy ! Component: 150 - total flux cleaned = 4.47521e-06 Jy ! Component: 200 - total flux cleaned = -3.56761e-06 Jy ! Total flux subtracted in 200 components = -3.56761e-06 Jy ! Clean residual min=-0.000644 max=0.000815 Jy/beam ! Clean residual mean=-0.000001 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.280884 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 0.280884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052051Jy sigma=1.184789 ! Fit after self-cal, rms=0.052050Jy sigma=1.184784 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9638 mas, bmaj=1.239 mas, bpa=-0.9606 degrees ! Estimated noise=0.112841 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9638 x 1.239 at -0.9606 degrees (North through East) ! Clean map min=-0.00056347 max=0.16296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7202 mas, bmaj=0.9288 mas, bpa=0.9495 degrees ! Estimated noise=0.272389 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111382 Jy ! Component: 100 - total flux cleaned = 0.156262 Jy ! Component: 150 - total flux cleaned = 0.184389 Jy ! Component: 200 - total flux cleaned = 0.204183 Jy ! Total flux subtracted in 200 components = 0.204183 Jy ! Clean residual min=-0.004191 max=0.011232 Jy/beam ! Clean residual mean=-0.000024 rms=0.001004 Jy/beam ! Combined flux in latest and established models = 0.204183 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.204183 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9638 mas, bmaj=1.239 mas, bpa=-0.9606 degrees ! Estimated noise=0.112841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243105 Jy ! Component: 100 - total flux cleaned = 0.0391287 Jy ! Component: 150 - total flux cleaned = 0.048841 Jy ! Component: 200 - total flux cleaned = 0.0555691 Jy ! Total flux subtracted in 200 components = 0.0555691 Jy ! Clean residual min=-0.001464 max=0.003776 Jy/beam ! Clean residual mean=-0.000019 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.259752 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 60 components and 0.259752 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488792 Jy ! Component: 100 - total flux cleaned = 0.00853875 Jy ! Component: 150 - total flux cleaned = 0.0113003 Jy ! Component: 200 - total flux cleaned = 0.0134078 Jy ! Total flux subtracted in 200 components = 0.0134078 Jy ! Clean residual min=-0.000965 max=0.001242 Jy/beam ! Clean residual mean=-0.000007 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.273159 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 82 components and 0.273159 Jy ! Inverting map ! Added new window around map position (1, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166219 Jy ! Component: 100 - total flux cleaned = 0.00299892 Jy ! Component: 150 - total flux cleaned = 0.00377338 Jy ! Component: 200 - total flux cleaned = 0.00433887 Jy ! Total flux subtracted in 200 components = 0.00433887 Jy ! Clean residual min=-0.000805 max=0.000848 Jy/beam ! Clean residual mean=-0.000003 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.277498 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 100 components and 0.277498 Jy ! Inverting map ! Added new window around map position (0.8, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711369 Jy ! Component: 100 - total flux cleaned = 0.00115347 Jy ! Component: 150 - total flux cleaned = 0.00149685 Jy ! Component: 200 - total flux cleaned = 0.0017845 Jy ! Total flux subtracted in 200 components = 0.0017845 Jy ! Clean residual min=-0.000693 max=0.000738 Jy/beam ! Clean residual mean=-0.000002 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.279283 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 107 components and 0.279283 Jy ! Inverting map ! Added new window around map position (-1, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581083 Jy ! Component: 100 - total flux cleaned = 0.000806173 Jy ! Component: 150 - total flux cleaned = 0.0010166 Jy ! Component: 200 - total flux cleaned = 0.00127911 Jy ! Total flux subtracted in 200 components = 0.00127911 Jy ! Clean residual min=-0.000629 max=0.000716 Jy/beam ! Clean residual mean=-0.000002 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.280562 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 122 components and 0.280562 Jy ! Inverting map ! Added new window around map position (-8.2, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633295 Jy ! Component: 100 - total flux cleaned = 0.000920995 Jy ! Component: 150 - total flux cleaned = 0.00114992 Jy ! Component: 200 - total flux cleaned = 0.00132999 Jy ! Total flux subtracted in 200 components = 0.00132999 Jy ! Clean residual min=-0.000612 max=0.000629 Jy/beam ! Clean residual mean=-0.000001 rms=0.000151 Jy/beam ! Combined flux in latest and established models = 0.281892 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 132 components and 0.281892 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.258 mas, bmaj=2.369 mas, bpa=7.922 degrees ! Estimated noise=0.149379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000440038 Jy ! Component: 100 - total flux cleaned = 0.00072578 Jy ! Component: 150 - total flux cleaned = 0.0008759 Jy ! Component: 200 - total flux cleaned = 0.000957271 Jy ! Total flux subtracted in 200 components = 0.000957271 Jy ! Clean residual min=-0.000575 max=0.000723 Jy/beam ! Clean residual mean=-0.000002 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.282849 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.08011e-05 Jy ! Component: 100 - total flux cleaned = 9.58468e-05 Jy ! Component: 150 - total flux cleaned = 0.000127654 Jy ! Component: 200 - total flux cleaned = 0.000149444 Jy ! Total flux subtracted in 200 components = 0.000149444 Jy ! Clean residual min=-0.000573 max=0.000719 Jy/beam ! Clean residual mean=-0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.282999 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 184 components and 0.282999 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9638 mas, bmaj=1.239 mas, bpa=-0.9606 degrees ! Estimated noise=0.112841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.63849e-05 Jy ! Component: 100 - total flux cleaned = -9.137e-05 Jy ! Component: 150 - total flux cleaned = -0.000105513 Jy ! Component: 200 - total flux cleaned = -0.000105478 Jy ! Total flux subtracted in 200 components = -0.000105478 Jy ! Clean residual min=-0.000575 max=0.000624 Jy/beam ! Clean residual mean=-0.000001 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.282893 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 204 components and 0.282893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052033Jy sigma=1.184342 ! Fit after self-cal, rms=0.052030Jy sigma=1.184274 wmodel J2223+6249_X_map.mod ! Writing 204 model components to file: J2223+6249_X_map.mod wobs J2223+6249_X_uvs.fits ! Writing UV FITS file: J2223+6249_X_uvs.fits wwins J2223+6249_X_map.win ! wwins: Wrote 10 windows to J2223+6249_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259805 Jy ! Component: 100 - total flux cleaned = 0.000347534 Jy ! Component: 150 - total flux cleaned = 0.000358065 Jy ! Component: 200 - total flux cleaned = 0.000378362 Jy ! Component: 250 - total flux cleaned = 0.000398075 Jy ! Component: 300 - total flux cleaned = 0.000427071 Jy ! Component: 350 - total flux cleaned = 0.000436533 Jy ! Component: 400 - total flux cleaned = 0.000473781 Jy ! Component: 450 - total flux cleaned = 0.000528552 Jy ! Component: 500 - total flux cleaned = 0.000528519 Jy ! Component: 550 - total flux cleaned = 0.000537468 Jy ! Component: 600 - total flux cleaned = 0.000546286 Jy ! Component: 650 - total flux cleaned = 0.000563574 Jy ! Component: 700 - total flux cleaned = 0.000606443 Jy ! Component: 750 - total flux cleaned = 0.000614773 Jy ! Component: 800 - total flux cleaned = 0.000614661 Jy ! Component: 850 - total flux cleaned = 0.000606489 Jy ! Component: 900 - total flux cleaned = 0.000614848 Jy ! Component: 950 - total flux cleaned = 0.000647473 Jy ! Component: 1000 - total flux cleaned = 0.000631214 Jy ! Component: 1050 - total flux cleaned = 0.000639267 Jy ! Component: 1100 - total flux cleaned = 0.00063922 Jy ! Component: 1150 - total flux cleaned = 0.000662871 Jy ! Component: 1200 - total flux cleaned = 0.000639321 Jy ! Component: 1250 - total flux cleaned = 0.000623853 Jy ! Component: 1300 - total flux cleaned = 0.00063929 Jy ! Component: 1350 - total flux cleaned = 0.000631768 Jy ! Component: 1400 - total flux cleaned = 0.000631779 Jy ! Component: 1450 - total flux cleaned = 0.000639317 Jy ! Component: 1500 - total flux cleaned = 0.000639347 Jy ! Component: 1550 - total flux cleaned = 0.000616925 Jy ! Component: 1600 - total flux cleaned = 0.000602062 Jy ! Component: 1650 - total flux cleaned = 0.000579969 Jy ! Component: 1700 - total flux cleaned = 0.000572709 Jy ! Component: 1750 - total flux cleaned = 0.000587217 Jy ! Component: 1800 - total flux cleaned = 0.00054388 Jy ! Component: 1850 - total flux cleaned = 0.000529464 Jy ! Component: 1900 - total flux cleaned = 0.000558039 Jy ! Component: 1950 - total flux cleaned = 0.000550859 Jy ! Component: 2000 - total flux cleaned = 0.000543769 Jy ! Component: 2050 - total flux cleaned = 0.000543796 Jy ! Component: 2100 - total flux cleaned = 0.000543815 Jy ! Component: 2150 - total flux cleaned = 0.000557705 Jy ! Component: 2200 - total flux cleaned = 0.000550858 Jy ! Component: 2250 - total flux cleaned = 0.000571452 Jy ! Component: 2300 - total flux cleaned = 0.000571452 Jy ! Component: 2350 - total flux cleaned = 0.000537438 Jy ! Component: 2400 - total flux cleaned = 0.00055094 Jy ! Component: 2450 - total flux cleaned = 0.00057786 Jy ! Component: 2500 - total flux cleaned = 0.000597914 Jy ! Component: 2550 - total flux cleaned = 0.000591246 Jy ! Component: 2600 - total flux cleaned = 0.000597821 Jy ! Component: 2650 - total flux cleaned = 0.000597831 Jy ! Component: 2700 - total flux cleaned = 0.000630671 Jy ! Component: 2750 - total flux cleaned = 0.000637203 Jy ! Component: 2800 - total flux cleaned = 0.000630703 Jy ! Component: 2850 - total flux cleaned = 0.000663024 Jy ! Component: 2900 - total flux cleaned = 0.000663007 Jy ! Component: 2950 - total flux cleaned = 0.000675781 Jy ! Component: 3000 - total flux cleaned = 0.000656642 Jy ! Component: 3050 - total flux cleaned = 0.000694694 Jy ! Component: 3100 - total flux cleaned = 0.000694733 Jy ! Component: 3150 - total flux cleaned = 0.000726174 Jy ! Component: 3200 - total flux cleaned = 0.000719922 Jy ! Component: 3250 - total flux cleaned = 0.000738618 Jy ! Component: 3300 - total flux cleaned = 0.000744852 Jy ! Component: 3350 - total flux cleaned = 0.00078195 Jy ! Component: 3400 - total flux cleaned = 0.000794278 Jy ! Component: 3450 - total flux cleaned = 0.000806548 Jy ! Component: 3500 - total flux cleaned = 0.00083706 Jy ! Component: 3550 - total flux cleaned = 0.000861413 Jy ! Component: 3600 - total flux cleaned = 0.000873522 Jy ! Component: 3650 - total flux cleaned = 0.000903736 Jy ! Component: 3700 - total flux cleaned = 0.000921755 Jy ! Component: 3750 - total flux cleaned = 0.000945684 Jy ! Component: 3800 - total flux cleaned = 0.000945696 Jy ! Component: 3850 - total flux cleaned = 0.000993191 Jy ! Component: 3900 - total flux cleaned = 0.00101685 Jy ! Component: 3950 - total flux cleaned = 0.00102274 Jy ! Component: 4000 - total flux cleaned = 0.00105209 Jy ! Component: 4050 - total flux cleaned = 0.00108134 Jy ! Total flux subtracted in 4096 components = 0.0011105 Jy ! Clean residual min=-0.000363 max=0.000345 Jy/beam ! Clean residual mean=-0.000000 rms=0.000100 Jy/beam ! Combined flux in latest and established models = 0.284004 Jy keep ! Adding 370 model components to the UV plane model. ! The established model now contains 574 components and 0.284003 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2223+6249_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9638 x 1.239 at -0.9606 degrees (North through East) ! Clean map min=-0.00044235 max=0.16344 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2223+6249_X_map.fits wmodel /vlbi/uf001/uva//J2223+6249_X_map.mod ! Writing 574 model components to file: /vlbi/uf001/uva//J2223+6249_X_map.mod wobs /vlbi/uf001/uva//J2223+6249_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2223+6249_X_uvs.fits wwins /vlbi/uf001/uva//J2223+6249_X_map.win ! wwins: Wrote 11 windows to /vlbi/uf001/uva//J2223+6249_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.163437 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.957e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.182767 0.182767 0.365535 0.73107 1.46214 2.92428 5.84856 11.6971 23.3942 46.7885 93.5769 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.163 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1641.43 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2223+6249_X_dfm.log closed on Mon Jan 14 06:15:39 2019