! Started logfile: /vlbi/uf001/uva//J2223+6249_S_dfm.log on Mon Jan 14 06:15:22 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2223+6249_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2223+6249_S_uva.fits
! AN table 1: 149 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.828486 visibilities/baseline/integration-bin.
! Found source: J2223+6249
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 13332 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2223+6249_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006604Jy  sigma=22.722238
! Fit after  self-cal, rms=0.931478Jy  sigma=21.076158
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.468 mas, bmaj=6.736 mas, bpa=-19.25 degrees
! Estimated noise=0.535254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0461863 Jy
! Component: 100  -  total flux cleaned = 0.0718159 Jy
! Total flux subtracted in 100 components = 0.0718159 Jy
! Clean residual min=-0.006181 max=0.014233 Jy/beam
! Clean residual mean=-0.000008 rms=0.002226 Jy/beam
! Combined flux in latest and established models = 0.0718159 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 64 components and 0.0718159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.080294Jy  sigma=1.708760
! Fit after  self-cal, rms=0.079214Jy  sigma=1.685392
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02003 Jy
! Component: 100  -  total flux cleaned = 0.0349379 Jy
! Total flux subtracted in 100 components = 0.0349379 Jy
! Clean residual min=-0.004991 max=0.010797 Jy/beam
! Clean residual mean=-0.000005 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 0.106754 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 104 components and 0.106754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.069265Jy  sigma=1.457890
! Fit after  self-cal, rms=0.069105Jy  sigma=1.454208
! Inverting map 
! Added new window around map position (3.5, -8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132801 Jy
! Component: 100  -  total flux cleaned = 0.0236528 Jy
! Total flux subtracted in 100 components = 0.0236528 Jy
! Clean residual min=-0.004213 max=0.007972 Jy/beam
! Clean residual mean=-0.000004 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.130407 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 119 components and 0.130407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064149Jy  sigma=1.341377
! Fit after  self-cal, rms=0.064053Jy  sigma=1.339493
! Inverting map 
! Added new window around map position (-6, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00946324 Jy
! Component: 100  -  total flux cleaned = 0.0170223 Jy
! Total flux subtracted in 100 components = 0.0170223 Jy
! Clean residual min=-0.003544 max=0.007147 Jy/beam
! Clean residual mean=-0.000003 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.147429 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 136 components and 0.147429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061334Jy  sigma=1.277034
! Fit after  self-cal, rms=0.061261Jy  sigma=1.275867
! Inverting map 
! Added new window around map position (7.5, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00737617 Jy
! Component: 100  -  total flux cleaned = 0.013224 Jy
! Total flux subtracted in 100 components = 0.013224 Jy
! Clean residual min=-0.003097 max=0.004361 Jy/beam
! Clean residual mean=-0.000002 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.160653 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 160 components and 0.160653 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.059613Jy  sigma=1.237247
! Fit after  self-cal, rms=0.059575Jy  sigma=1.236536
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.367 mas, bmaj=7.368 mas, bpa=-23.34 degrees
! Estimated noise=0.28149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00904059 Jy
! Component: 100  -  total flux cleaned = 0.0159279 Jy
! Component: 150  -  total flux cleaned = 0.0214832 Jy
! Component: 200  -  total flux cleaned = 0.0260478 Jy
! Total flux subtracted in 200 components = 0.0260478 Jy
! Clean residual min=-0.002201 max=0.004466 Jy/beam
! Clean residual mean=-0.000002 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.186701 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 235 components and 0.186701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057481Jy  sigma=1.188272
! Fit after  self-cal, rms=0.057432Jy  sigma=1.187461
! Inverting map 
! Added new window around map position (-3.5, 11.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438714 Jy
! Component: 100  -  total flux cleaned = 0.00776172 Jy
! Component: 150  -  total flux cleaned = 0.0105859 Jy
! Component: 200  -  total flux cleaned = 0.0129661 Jy
! Total flux subtracted in 200 components = 0.0129661 Jy
! Clean residual min=-0.001760 max=0.002241 Jy/beam
! Clean residual mean=-0.000002 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.199667 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 294 components and 0.199667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056914Jy  sigma=1.175159
! Fit after  self-cal, rms=0.056893Jy  sigma=1.174815
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.367 x 7.368 at -23.34 degrees (North through East)
! Clean map  min=-0.0017836  max=0.060692 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        0.94     KP        1.00     
!   LA        0.95     NL        1.16     OV        1.05     PT        0.97     
!   SC        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.87     KP        1.00     
!   LA        0.93     NL        1.06     OV        0.98     PT        0.97     
!   SC        0.75     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        0.92     KP        0.99     
!   LA        0.96     NL        1.01     OV        1.02     PT        0.97     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.056893Jy  sigma=1.174815
! Fit after  self-cal, rms=0.053552Jy  sigma=1.167559
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.219 mas, bmaj=7.312 mas, bpa=-23.52 degrees
! Estimated noise=0.272059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010392 Jy
! Component: 100  -  total flux cleaned = 0.00162776 Jy
! Component: 150  -  total flux cleaned = 0.00177145 Jy
! Component: 200  -  total flux cleaned = 0.00193894 Jy
! Total flux subtracted in 200 components = 0.00193894 Jy
! Clean residual min=-0.001432 max=0.001471 Jy/beam
! Clean residual mean=-0.000004 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.201606 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 317 components and 0.201606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053523Jy  sigma=1.166886
! Fit after  self-cal, rms=0.053521Jy  sigma=1.166683
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.053521Jy  sigma=1.166683
! Fit after  self-cal, rms=0.052438Jy  sigma=1.163247
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.213 mas, bmaj=7.267 mas, bpa=-23.58 degrees
! Estimated noise=0.269603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000204078 Jy
! Component: 100  -  total flux cleaned = 0.000333033 Jy
! Component: 150  -  total flux cleaned = 0.000350868 Jy
! Component: 200  -  total flux cleaned = 0.000350891 Jy
! Total flux subtracted in 200 components = 0.000350891 Jy
! Clean residual min=-0.001235 max=0.001267 Jy/beam
! Clean residual mean=-0.000000 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.201957 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 333 components and 0.201957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052423Jy  sigma=1.162894
! Fit after  self-cal, rms=0.052426Jy  sigma=1.162771
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18397e-05 Jy
! Component: 100  -  total flux cleaned = 5.96593e-06 Jy
! Component: 150  -  total flux cleaned = -7.87775e-06 Jy
! Component: 200  -  total flux cleaned = -2.04306e-05 Jy
! Total flux subtracted in 200 components = -2.04306e-05 Jy
! Clean residual min=-0.001239 max=0.001260 Jy/beam
! Clean residual mean=-0.000000 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.201936 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 344 components and 0.201936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052418Jy  sigma=1.162597
! Fit after  self-cal, rms=0.052419Jy  sigma=1.162581
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052419Jy  sigma=1.162581
! Fit after  self-cal, rms=0.052039Jy  sigma=1.162501
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.194 mas, bmaj=7.273 mas, bpa=-23.58 degrees
! Estimated noise=0.268126 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288966 Jy
! Component: 100  -  total flux cleaned = 0.00036159 Jy
! Component: 150  -  total flux cleaned = 0.000348528 Jy
! Component: 200  -  total flux cleaned = 0.000325602 Jy
! Total flux subtracted in 200 components = 0.000325602 Jy
! Clean residual min=-0.001218 max=0.001232 Jy/beam
! Clean residual mean=-0.000000 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.202262 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 350 components and 0.202262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052032Jy  sigma=1.162340
! Fit after  self-cal, rms=0.052033Jy  sigma=1.162324
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.41183e-05 Jy
! Component: 100  -  total flux cleaned = -8.74622e-06 Jy
! Component: 150  -  total flux cleaned = -8.81622e-06 Jy
! Component: 200  -  total flux cleaned = -1.85647e-05 Jy
! Total flux subtracted in 200 components = -1.85647e-05 Jy
! Clean residual min=-0.001215 max=0.001226 Jy/beam
! Clean residual mean=-0.000000 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.202243 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 358 components and 0.202243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052028Jy  sigma=1.162231
! Fit after  self-cal, rms=0.052029Jy  sigma=1.162223
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.052029Jy  sigma=1.162223
! Fit after  self-cal, rms=0.051802Jy  sigma=1.162191
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.186 mas, bmaj=9.352 mas, bpa=-23.64 degrees
! Estimated noise=0.310786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000379259 Jy
! Component: 100  -  total flux cleaned = 0.0005755 Jy
! Component: 150  -  total flux cleaned = 0.000704505 Jy
! Component: 200  -  total flux cleaned = 0.000798294 Jy
! Total flux subtracted in 200 components = 0.000798294 Jy
! Clean residual min=-0.001354 max=0.001555 Jy/beam
! Clean residual mean=-0.000001 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.203041 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 372 components and 0.203041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051799Jy  sigma=1.162156
! Fit after  self-cal, rms=0.051799Jy  sigma=1.162143
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.5, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158601 Jy
! Component: 100  -  total flux cleaned = 0.00220081 Jy
! Component: 150  -  total flux cleaned = 0.00270164 Jy
! Component: 200  -  total flux cleaned = 0.00310064 Jy
! Total flux subtracted in 200 components = 0.00310064 Jy
! Clean residual min=-0.001214 max=0.001075 Jy/beam
! Clean residual mean=0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.206142 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 408 components and 0.206142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051754Jy  sigma=1.161221
! Fit after  self-cal, rms=0.051745Jy  sigma=1.161031
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.181 mas, bmaj=7.273 mas, bpa=-23.45 degrees
! Estimated noise=0.267137 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.181 x 7.273 at -23.45 degrees (North through East)
! Clean map  min=-0.0011228  max=0.05743 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.313 mas, bmaj=6.666 mas, bpa=-19.77 degrees
! Estimated noise=0.502323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0443897 Jy
! Component: 100  -  total flux cleaned = 0.0711098 Jy
! Component: 150  -  total flux cleaned = 0.0904314 Jy
! Component: 200  -  total flux cleaned = 0.105708 Jy
! Total flux subtracted in 200 components = 0.105708 Jy
! Clean residual min=-0.004781 max=0.009078 Jy/beam
! Clean residual mean=-0.000004 rms=0.001563 Jy/beam
! Combined flux in latest and established models = 0.105708 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 78 model components to the UV plane model.
! The established model now contains 78 components and 0.105708 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.181 mas, bmaj=7.273 mas, bpa=-23.45 degrees
! Estimated noise=0.267137 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203186 Jy
! Component: 100  -  total flux cleaned = 0.0350455 Jy
! Component: 150  -  total flux cleaned = 0.0463598 Jy
! Component: 200  -  total flux cleaned = 0.0551812 Jy
! Total flux subtracted in 200 components = 0.0551812 Jy
! Clean residual min=-0.003016 max=0.005213 Jy/beam
! Clean residual mean=-0.000002 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.16089 Jy
! Adding 113 model components to the UV plane model.
! The established model now contains 179 components and 0.16089 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00703601 Jy
! Component: 100  -  total flux cleaned = 0.0127802 Jy
! Component: 150  -  total flux cleaned = 0.0175246 Jy
! Component: 200  -  total flux cleaned = 0.021473 Jy
! Total flux subtracted in 200 components = 0.021473 Jy
! Clean residual min=-0.001949 max=0.002450 Jy/beam
! Clean residual mean=-0.000001 rms=0.000581 Jy/beam
! Combined flux in latest and established models = 0.182363 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 280 components and 0.182363 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.186 mas, bmaj=9.352 mas, bpa=-23.64 degrees
! Estimated noise=0.310786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00520984 Jy
! Component: 100  -  total flux cleaned = 0.00893346 Jy
! Component: 150  -  total flux cleaned = 0.0117262 Jy
! Component: 200  -  total flux cleaned = 0.0138885 Jy
! Total flux subtracted in 200 components = 0.0138885 Jy
! Clean residual min=-0.001610 max=0.001492 Jy/beam
! Clean residual mean=-0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.196251 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157234 Jy
! Component: 100  -  total flux cleaned = 0.00295978 Jy
! Component: 150  -  total flux cleaned = 0.00408206 Jy
! Component: 200  -  total flux cleaned = 0.00509455 Jy
! Total flux subtracted in 200 components = 0.00509455 Jy
! Clean residual min=-0.001341 max=0.001149 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.201346 Jy
! Adding 181 model components to the UV plane model.
! The established model now contains 430 components and 0.201346 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.181 mas, bmaj=7.273 mas, bpa=-23.45 degrees
! Estimated noise=0.267137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302873 Jy
! Component: 100  -  total flux cleaned = 0.000797448 Jy
! Component: 150  -  total flux cleaned = 0.00132786 Jy
! Component: 200  -  total flux cleaned = 0.00180481 Jy
! Total flux subtracted in 200 components = 0.00180481 Jy
! Clean residual min=-0.001136 max=0.001165 Jy/beam
! Clean residual mean=0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.203151 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 465 components and 0.203151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.051764Jy  sigma=1.161619
! Fit after  self-cal, rms=0.051757Jy  sigma=1.161373
wmodel J2223+6249_S_map.mod
! Writing 465 model components to file: J2223+6249_S_map.mod
wobs   J2223+6249_S_uvs.fits
! Writing UV FITS file: J2223+6249_S_uvs.fits
wwins  J2223+6249_S_map.win
! wwins: Wrote 6 windows to J2223+6249_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123448 Jy
! Component: 100  -  total flux cleaned = 0.000106585 Jy
! Component: 150  -  total flux cleaned = -7.48021e-05 Jy
! Component: 200  -  total flux cleaned = -0.00016166 Jy
! Component: 250  -  total flux cleaned = -0.000329019 Jy
! Component: 300  -  total flux cleaned = -0.000458199 Jy
! Component: 350  -  total flux cleaned = -0.000583666 Jy
! Component: 400  -  total flux cleaned = -0.000720974 Jy
! Component: 450  -  total flux cleaned = -0.000854796 Jy
! Component: 500  -  total flux cleaned = -0.000912843 Jy
! Component: 550  -  total flux cleaned = -0.000969502 Jy
! Component: 600  -  total flux cleaned = -0.00102528 Jy
! Component: 650  -  total flux cleaned = -0.00109351 Jy
! Component: 700  -  total flux cleaned = -0.0011737 Jy
! Component: 750  -  total flux cleaned = -0.00120022 Jy
! Component: 800  -  total flux cleaned = -0.00129043 Jy
! Component: 850  -  total flux cleaned = -0.00130277 Jy
! Component: 900  -  total flux cleaned = -0.00130307 Jy
! Component: 950  -  total flux cleaned = -0.00133997 Jy
! Component: 1000  -  total flux cleaned = -0.00136391 Jy
! Component: 1050  -  total flux cleaned = -0.0013756 Jy
! Component: 1100  -  total flux cleaned = -0.00135212 Jy
! Component: 1150  -  total flux cleaned = -0.00135244 Jy
! Component: 1200  -  total flux cleaned = -0.00138677 Jy
! Component: 1250  -  total flux cleaned = -0.00139814 Jy
! Component: 1300  -  total flux cleaned = -0.00138696 Jy
! Component: 1350  -  total flux cleaned = -0.00140895 Jy
! Component: 1400  -  total flux cleaned = -0.00144145 Jy
! Component: 1450  -  total flux cleaned = -0.00144144 Jy
! Component: 1500  -  total flux cleaned = -0.00143091 Jy
! Component: 1550  -  total flux cleaned = -0.00149396 Jy
! Component: 1600  -  total flux cleaned = -0.00150419 Jy
! Component: 1650  -  total flux cleaned = -0.00151433 Jy
! Component: 1700  -  total flux cleaned = -0.00154483 Jy
! Component: 1750  -  total flux cleaned = -0.00152464 Jy
! Component: 1800  -  total flux cleaned = -0.00155449 Jy
! Component: 1850  -  total flux cleaned = -0.00156414 Jy
! Component: 1900  -  total flux cleaned = -0.00156411 Jy
! Component: 1950  -  total flux cleaned = -0.00155432 Jy
! Component: 2000  -  total flux cleaned = -0.00151592 Jy
! Component: 2050  -  total flux cleaned = -0.00154462 Jy
! Component: 2100  -  total flux cleaned = -0.00156354 Jy
! Component: 2150  -  total flux cleaned = -0.00159156 Jy
! Component: 2200  -  total flux cleaned = -0.00161007 Jy
! Component: 2250  -  total flux cleaned = -0.00161007 Jy
! Component: 2300  -  total flux cleaned = -0.00162826 Jy
! Component: 2350  -  total flux cleaned = -0.00161931 Jy
! Component: 2400  -  total flux cleaned = -0.00164615 Jy
! Component: 2450  -  total flux cleaned = -0.001646 Jy
! Component: 2500  -  total flux cleaned = -0.00164598 Jy
! Component: 2550  -  total flux cleaned = -0.0016285 Jy
! Component: 2600  -  total flux cleaned = -0.00163731 Jy
! Component: 2650  -  total flux cleaned = -0.00162019 Jy
! Component: 2700  -  total flux cleaned = -0.00162882 Jy
! Component: 2750  -  total flux cleaned = -0.00158653 Jy
! Component: 2800  -  total flux cleaned = -0.00158662 Jy
! Component: 2850  -  total flux cleaned = -0.00160333 Jy
! Component: 2900  -  total flux cleaned = -0.00158679 Jy
! Component: 2950  -  total flux cleaned = -0.00159506 Jy
! Component: 3000  -  total flux cleaned = -0.00157067 Jy
! Component: 3050  -  total flux cleaned = -0.00154643 Jy
! Component: 3100  -  total flux cleaned = -0.00156257 Jy
! Component: 3150  -  total flux cleaned = -0.0015944 Jy
! Component: 3200  -  total flux cleaned = -0.00157058 Jy
! Component: 3250  -  total flux cleaned = -0.00153902 Jy
! Component: 3300  -  total flux cleaned = -0.00156252 Jy
! Component: 3350  -  total flux cleaned = -0.00157033 Jy
! Component: 3400  -  total flux cleaned = -0.00153946 Jy
! Component: 3450  -  total flux cleaned = -0.00152413 Jy
! Component: 3500  -  total flux cleaned = -0.00154696 Jy
! Component: 3550  -  total flux cleaned = -0.00148636 Jy
! Component: 3600  -  total flux cleaned = -0.00150147 Jy
! Component: 3650  -  total flux cleaned = -0.00147149 Jy
! Component: 3700  -  total flux cleaned = -0.00146407 Jy
! Component: 3750  -  total flux cleaned = -0.00142714 Jy
! Component: 3800  -  total flux cleaned = -0.00144195 Jy
! Component: 3850  -  total flux cleaned = -0.00144922 Jy
! Component: 3900  -  total flux cleaned = -0.00142741 Jy
! Component: 3950  -  total flux cleaned = -0.00142735 Jy
! Component: 4000  -  total flux cleaned = -0.00141301 Jy
! Component: 4050  -  total flux cleaned = -0.00139158 Jy
! Total flux subtracted in 4096 components = -0.00139155 Jy
! Clean residual min=-0.000444 max=0.000417 Jy/beam
! Clean residual mean=0.000002 rms=0.000139 Jy/beam
! Combined flux in latest and established models = 0.201759 Jy
keep
! Adding 325 model components to the UV plane model.
! The established model now contains 790 components and 0.201759 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2223+6249_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.181 x 7.273 at -23.45 degrees (North through East)
! Clean map  min=-0.00095832  max=0.057133 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2223+6249_S_map.fits
wmodel /vlbi/uf001/uva//J2223+6249_S_map.mod
! Writing 790 model components to file: /vlbi/uf001/uva//J2223+6249_S_map.mod
wobs   /vlbi/uf001/uva//J2223+6249_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2223+6249_S_uvs.fits
wwins  /vlbi/uf001/uva//J2223+6249_S_map.win
! wwins: Wrote 7 windows to /vlbi/uf001/uva//J2223+6249_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0571327 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000139491 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.73246 0.73246 1.46492 2.92984 5.85968 11.7194 23.4387 46.8775 93.7549
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  409.578 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2223+6249_S_dfm.log closed on Mon Jan 14 06:15:28 2019