! Started logfile: /vlbi/uf001/uva//J2222+1213_S_dfm.log on Mon Jan 14 06:14:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2222+1213_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2222+1213_S_uva.fits
! AN table 1: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.960317 visibilities/baseline/integration-bin.
! Found source: J2222+1213
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4356 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2222+1213_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 62 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026247Jy  sigma=19.990648
! Fit after  self-cal, rms=0.826170Jy  sigma=16.157989
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.535 mas, bmaj=6.477 mas, bpa=-3.822 degrees
! Estimated noise=0.725965 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128466 Jy
! Component: 100  -  total flux cleaned = 0.176755 Jy
! Total flux subtracted in 100 components = 0.176755 Jy
! Clean residual min=-0.007867 max=0.022582 Jy/beam
! Clean residual mean=-0.000019 rms=0.002466 Jy/beam
! Combined flux in latest and established models = 0.176755 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.176755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078736Jy  sigma=1.476653
! Fit after  self-cal, rms=0.078466Jy  sigma=1.471534
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0255741 Jy
! Component: 100  -  total flux cleaned = 0.0389 Jy
! Total flux subtracted in 100 components = 0.0389 Jy
! Clean residual min=-0.005659 max=0.009899 Jy/beam
! Clean residual mean=-0.000011 rms=0.001493 Jy/beam
! Combined flux in latest and established models = 0.215655 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.215655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.068415Jy  sigma=1.277138
! Fit after  self-cal, rms=0.068342Jy  sigma=1.275849
! Inverting map 
! Added new window around map position (-3.5, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00964011 Jy
! Component: 100  -  total flux cleaned = 0.0152595 Jy
! Total flux subtracted in 100 components = 0.0152595 Jy
! Clean residual min=-0.005158 max=0.006118 Jy/beam
! Clean residual mean=-0.000008 rms=0.001282 Jy/beam
! Combined flux in latest and established models = 0.230914 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 28 components and 0.230914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066776Jy  sigma=1.245197
! Fit after  self-cal, rms=0.066746Jy  sigma=1.244719
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.984 mas, bmaj=6.951 mas, bpa=-3.33 degrees
! Estimated noise=0.606218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00534854 Jy
! Component: 100  -  total flux cleaned = 0.00924354 Jy
! Component: 150  -  total flux cleaned = 0.0122489 Jy
! Component: 200  -  total flux cleaned = 0.0146147 Jy
! Total flux subtracted in 200 components = 0.0146147 Jy
! Clean residual min=-0.004807 max=0.006521 Jy/beam
! Clean residual mean=-0.000011 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.245529 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 51 components and 0.245529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.066138Jy  sigma=1.233314
! Fit after  self-cal, rms=0.066124Jy  sigma=1.233023
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.984 x 6.951 at -3.33 degrees (North through East)
! Clean map  min=-0.0045435  max=0.17366 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.97     KP        0.99     
!   LA        0.93     MK        0.96     NL        1.07     OV        1.00     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.91     MK        1.03     NL        1.12     OV        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.97     KP        1.00     
!   LA        0.90     MK        0.97     NL        1.13     OV        0.98     
!   SC        0.98     
! 
! 
! Fit before self-cal, rms=0.066124Jy  sigma=1.233023
! Fit after  self-cal, rms=0.064667Jy  sigma=1.208666
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.971 mas, bmaj=6.967 mas, bpa=-3.237 degrees
! Estimated noise=0.599101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100555 Jy
! Component: 100  -  total flux cleaned = 0.00118257 Jy
! Component: 150  -  total flux cleaned = 0.00133292 Jy
! Component: 200  -  total flux cleaned = 0.00139829 Jy
! Total flux subtracted in 200 components = 0.00139829 Jy
! Clean residual min=-0.004067 max=0.004708 Jy/beam
! Clean residual mean=-0.000001 rms=0.001005 Jy/beam
! Combined flux in latest and established models = 0.246927 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 65 components and 0.246927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064622Jy  sigma=1.207526
! Fit after  self-cal, rms=0.064650Jy  sigma=1.207347
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064650Jy  sigma=1.207347
! Fit after  self-cal, rms=0.063827Jy  sigma=1.180455
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.967 mas, bmaj=6.974 mas, bpa=-3.35 degrees
! Estimated noise=0.60018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000811808 Jy
! Component: 100  -  total flux cleaned = 0.000812037 Jy
! Component: 150  -  total flux cleaned = 0.000812254 Jy
! Component: 200  -  total flux cleaned = 0.000856388 Jy
! Total flux subtracted in 200 components = 0.000856388 Jy
! Clean residual min=-0.003396 max=0.002713 Jy/beam
! Clean residual mean=0.000001 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.247784 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 72 components and 0.247784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063804Jy  sigma=1.180056
! Fit after  self-cal, rms=0.063836Jy  sigma=1.179925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.97954e-05 Jy
! Component: 100  -  total flux cleaned = 8.96081e-05 Jy
! Component: 150  -  total flux cleaned = 9.00267e-05 Jy
! Component: 200  -  total flux cleaned = 0.000142952 Jy
! Total flux subtracted in 200 components = 0.000142952 Jy
! Clean residual min=-0.003369 max=0.002733 Jy/beam
! Clean residual mean=0.000001 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.247927 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 74 components and 0.247927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063822Jy  sigma=1.179742
! Fit after  self-cal, rms=0.063823Jy  sigma=1.179724
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063823Jy  sigma=1.179724
! Fit after  self-cal, rms=0.063745Jy  sigma=1.179436
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=6.968 mas, bpa=-3.378 degrees
! Estimated noise=0.598855 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000550338 Jy
! Component: 100  -  total flux cleaned = 0.000649621 Jy
! Component: 150  -  total flux cleaned = 0.00070231 Jy
! Component: 200  -  total flux cleaned = 0.000735135 Jy
! Total flux subtracted in 200 components = 0.000735135 Jy
! Clean residual min=-0.003390 max=0.002673 Jy/beam
! Clean residual mean=0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.248662 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 75 components and 0.248662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063732Jy  sigma=1.179224
! Fit after  self-cal, rms=0.063736Jy  sigma=1.179205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.75736e-05 Jy
! Component: 100  -  total flux cleaned = 7.1412e-05 Jy
! Component: 150  -  total flux cleaned = 8.58413e-05 Jy
! Component: 200  -  total flux cleaned = 8.62302e-05 Jy
! Total flux subtracted in 200 components = 8.62302e-05 Jy
! Clean residual min=-0.003367 max=0.002679 Jy/beam
! Clean residual mean=0.000001 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.248748 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.248748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063728Jy  sigma=1.179099
! Fit after  self-cal, rms=0.063729Jy  sigma=1.179087
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063729Jy  sigma=1.179087
! Fit after  self-cal, rms=0.063657Jy  sigma=1.179024
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.506 mas, bmaj=9.818 mas, bpa=-2.408 degrees
! Estimated noise=0.826348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011525 Jy
! Component: 100  -  total flux cleaned = 0.001206 Jy
! Component: 150  -  total flux cleaned = 0.00116575 Jy
! Component: 200  -  total flux cleaned = 0.00114909 Jy
! Total flux subtracted in 200 components = 0.00114909 Jy
! Clean residual min=-0.003505 max=0.004392 Jy/beam
! Clean residual mean=0.000004 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.249897 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 81 components and 0.249897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063666Jy  sigma=1.179228
! Fit after  self-cal, rms=0.063663Jy  sigma=1.179119
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, -128).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00301554 Jy
! Component: 100  -  total flux cleaned = 0.00313296 Jy
! Component: 150  -  total flux cleaned = 0.00305444 Jy
! Component: 200  -  total flux cleaned = 0.00314954 Jy
! Total flux subtracted in 200 components = 0.00314954 Jy
! Clean residual min=-0.002984 max=0.002921 Jy/beam
! Clean residual mean=0.000001 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.253047 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 117 components and 0.253047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063498Jy  sigma=1.176519
! Fit after  self-cal, rms=0.063494Jy  sigma=1.176357
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=6.963 mas, bpa=-3.402 degrees
! Estimated noise=0.597852 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.953 x 6.963 at -3.402 degrees (North through East)
! Clean map  min=-0.0029183  max=0.17142 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.516 mas, bmaj=6.496 mas, bpa=-3.911 degrees
! Estimated noise=0.712499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12641 Jy
! Component: 100  -  total flux cleaned = 0.175196 Jy
! Component: 150  -  total flux cleaned = 0.200439 Jy
! Component: 200  -  total flux cleaned = 0.214615 Jy
! Total flux subtracted in 200 components = 0.214615 Jy
! Clean residual min=-0.004836 max=0.007369 Jy/beam
! Clean residual mean=-0.000007 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 0.214615 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.214615 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=6.963 mas, bpa=-3.402 degrees
! Estimated noise=0.597852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113706 Jy
! Component: 100  -  total flux cleaned = 0.0179638 Jy
! Component: 150  -  total flux cleaned = 0.022314 Jy
! Component: 200  -  total flux cleaned = 0.0255503 Jy
! Total flux subtracted in 200 components = 0.0255503 Jy
! Clean residual min=-0.003646 max=0.002896 Jy/beam
! Clean residual mean=-0.000003 rms=0.000723 Jy/beam
! Combined flux in latest and established models = 0.240165 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 0.240165 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.506 mas, bmaj=9.818 mas, bpa=-2.408 degrees
! Estimated noise=0.826348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00463644 Jy
! Component: 100  -  total flux cleaned = 0.0069917 Jy
! Component: 150  -  total flux cleaned = 0.00820585 Jy
! Component: 200  -  total flux cleaned = 0.0091165 Jy
! Total flux subtracted in 200 components = 0.0091165 Jy
! Clean residual min=-0.003418 max=0.003204 Jy/beam
! Clean residual mean=-0.000001 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.249282 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000762953 Jy
! Component: 100  -  total flux cleaned = 0.00140476 Jy
! Component: 150  -  total flux cleaned = 0.00195029 Jy
! Component: 200  -  total flux cleaned = 0.00247426 Jy
! Total flux subtracted in 200 components = 0.00247426 Jy
! Clean residual min=-0.003106 max=0.002928 Jy/beam
! Clean residual mean=0.000000 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.251756 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 108 components and 0.251756 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.953 mas, bmaj=6.963 mas, bpa=-3.402 degrees
! Estimated noise=0.597852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.35701e-05 Jy
! Component: 100  -  total flux cleaned = 3.55887e-05 Jy
! Component: 150  -  total flux cleaned = 3.21771e-05 Jy
! Component: 200  -  total flux cleaned = 3.43346e-05 Jy
! Total flux subtracted in 200 components = 3.43346e-05 Jy
! Clean residual min=-0.002894 max=0.002397 Jy/beam
! Clean residual mean=-0.000000 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.25179 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 125 components and 0.25179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063482Jy  sigma=1.176280
! Fit after  self-cal, rms=0.063477Jy  sigma=1.176149
wmodel J2222+1213_S_map.mod
! Writing 125 model components to file: J2222+1213_S_map.mod
wobs   J2222+1213_S_uvs.fits
! Writing UV FITS file: J2222+1213_S_uvs.fits
wwins  J2222+1213_S_map.win
! wwins: Wrote 3 windows to J2222+1213_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000859161 Jy
! Component: 100  -  total flux cleaned = -0.000989352 Jy
! Component: 150  -  total flux cleaned = -0.00086757 Jy
! Component: 200  -  total flux cleaned = -0.000671476 Jy
! Component: 250  -  total flux cleaned = -0.000366074 Jy
! Component: 300  -  total flux cleaned = -0.000106631 Jy
! Component: 350  -  total flux cleaned = 0.000146151 Jy
! Component: 400  -  total flux cleaned = 0.000322965 Jy
! Component: 450  -  total flux cleaned = 0.000564248 Jy
! Component: 500  -  total flux cleaned = 0.00066498 Jy
! Component: 550  -  total flux cleaned = 0.000732266 Jy
! Component: 600  -  total flux cleaned = 0.000991987 Jy
! Component: 650  -  total flux cleaned = 0.00102453 Jy
! Component: 700  -  total flux cleaned = 0.00124362 Jy
! Component: 750  -  total flux cleaned = 0.00136645 Jy
! Component: 800  -  total flux cleaned = 0.00163756 Jy
! Component: 850  -  total flux cleaned = 0.00169688 Jy
! Component: 900  -  total flux cleaned = 0.00193016 Jy
! Component: 950  -  total flux cleaned = 0.00207343 Jy
! Component: 1000  -  total flux cleaned = 0.00221406 Jy
! Component: 1050  -  total flux cleaned = 0.00221346 Jy
! Component: 1100  -  total flux cleaned = 0.00226897 Jy
! Component: 1150  -  total flux cleaned = 0.00240442 Jy
! Component: 1200  -  total flux cleaned = 0.00253735 Jy
! Component: 1250  -  total flux cleaned = 0.00258986 Jy
! Component: 1300  -  total flux cleaned = 0.00269355 Jy
! Component: 1350  -  total flux cleaned = 0.00271912 Jy
! Component: 1400  -  total flux cleaned = 0.00284501 Jy
! Component: 1450  -  total flux cleaned = 0.00287022 Jy
! Component: 1500  -  total flux cleaned = 0.00296887 Jy
! Component: 1550  -  total flux cleaned = 0.00304219 Jy
! Component: 1600  -  total flux cleaned = 0.00316197 Jy
! Component: 1650  -  total flux cleaned = 0.00323282 Jy
! Component: 1700  -  total flux cleaned = 0.00325573 Jy
! Component: 1750  -  total flux cleaned = 0.00323238 Jy
! Component: 1800  -  total flux cleaned = 0.00327751 Jy
! Component: 1850  -  total flux cleaned = 0.00329985 Jy
! Component: 1900  -  total flux cleaned = 0.00321029 Jy
! Component: 1950  -  total flux cleaned = 0.00321074 Jy
! Component: 2000  -  total flux cleaned = 0.00316707 Jy
! Component: 2050  -  total flux cleaned = 0.00316761 Jy
! Component: 2100  -  total flux cleaned = 0.00310357 Jy
! Component: 2150  -  total flux cleaned = 0.00306191 Jy
! Component: 2200  -  total flux cleaned = 0.00299939 Jy
! Component: 2250  -  total flux cleaned = 0.00289625 Jy
! Component: 2300  -  total flux cleaned = 0.00295748 Jy
! Component: 2350  -  total flux cleaned = 0.00285581 Jy
! Component: 2400  -  total flux cleaned = 0.00281527 Jy
! Component: 2450  -  total flux cleaned = 0.00275522 Jy
! Component: 2500  -  total flux cleaned = 0.00273538 Jy
! Component: 2550  -  total flux cleaned = 0.00271558 Jy
! Component: 2600  -  total flux cleaned = 0.00269643 Jy
! Component: 2650  -  total flux cleaned = 0.00265816 Jy
! Component: 2700  -  total flux cleaned = 0.00265834 Jy
! Component: 2750  -  total flux cleaned = 0.0026016 Jy
! Component: 2800  -  total flux cleaned = 0.00258338 Jy
! Component: 2850  -  total flux cleaned = 0.00260191 Jy
! Component: 2900  -  total flux cleaned = 0.00265728 Jy
! Component: 2950  -  total flux cleaned = 0.00260239 Jy
! Component: 3000  -  total flux cleaned = 0.00256643 Jy
! Component: 3050  -  total flux cleaned = 0.00263806 Jy
! Component: 3100  -  total flux cleaned = 0.00256668 Jy
! Component: 3150  -  total flux cleaned = 0.00261964 Jy
! Component: 3200  -  total flux cleaned = 0.00254933 Jy
! Component: 3250  -  total flux cleaned = 0.00261895 Jy
! Component: 3300  -  total flux cleaned = 0.0025843 Jy
! Component: 3350  -  total flux cleaned = 0.00263553 Jy
! Component: 3400  -  total flux cleaned = 0.00260147 Jy
! Component: 3450  -  total flux cleaned = 0.00253404 Jy
! Component: 3500  -  total flux cleaned = 0.00256747 Jy
! Component: 3550  -  total flux cleaned = 0.00255063 Jy
! Component: 3600  -  total flux cleaned = 0.0025175 Jy
! Component: 3650  -  total flux cleaned = 0.00255015 Jy
! Component: 3700  -  total flux cleaned = 0.00246866 Jy
! Component: 3750  -  total flux cleaned = 0.00245257 Jy
! Component: 3800  -  total flux cleaned = 0.00245251 Jy
! Component: 3850  -  total flux cleaned = 0.00235723 Jy
! Component: 3900  -  total flux cleaned = 0.00246798 Jy
! Component: 3950  -  total flux cleaned = 0.00240531 Jy
! Component: 4000  -  total flux cleaned = 0.00238982 Jy
! Component: 4050  -  total flux cleaned = 0.00248263 Jy
! Total flux subtracted in 4096 components = 0.00245203 Jy
! Clean residual min=-0.000930 max=0.001239 Jy/beam
! Clean residual mean=0.000000 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.254242 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 422 components and 0.254243 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2222+1213_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.953 x 6.963 at -3.402 degrees (North through East)
! Clean map  min=-0.001961  max=0.17091 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2222+1213_S_map.fits
wmodel /vlbi/uf001/uva//J2222+1213_S_map.mod
! Writing 422 model components to file: /vlbi/uf001/uva//J2222+1213_S_map.mod
wobs   /vlbi/uf001/uva//J2222+1213_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2222+1213_S_uvs.fits
wwins  /vlbi/uf001/uva//J2222+1213_S_map.win
! wwins: Wrote 4 windows to /vlbi/uf001/uva//J2222+1213_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.17091 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000272604 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.478504 0.478504 0.957007 1.91401 3.82803 7.65606 15.3121 30.6242 61.2485
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.17 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  626.954 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2222+1213_S_dfm.log closed on Mon Jan 14 06:14:53 2019