! Started logfile: /vlbi/uf001/uva//J2219-0051_X_dfm.log on Mon Jan 14 06:14:32 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2219-0051_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2219-0051_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.905291 visibilities/baseline/integration-bin.
! Found source: J2219-0051
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20532 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2219-0051_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 77 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013525Jy  sigma=23.183863
! Fit after  self-cal, rms=0.886160Jy  sigma=20.229568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7114 mas, bmaj=1.716 mas, bpa=0.3729 degrees
! Estimated noise=0.336437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0866723 Jy
! Component: 100  -  total flux cleaned = 0.116079 Jy
! Total flux subtracted in 100 components = 0.116079 Jy
! Clean residual min=-0.004235 max=0.011886 Jy/beam
! Clean residual mean=0.000000 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.116079 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.116079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063459Jy  sigma=1.337335
! Fit after  self-cal, rms=0.063297Jy  sigma=1.333997
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128213 Jy
! Component: 100  -  total flux cleaned = 0.019647 Jy
! Total flux subtracted in 100 components = 0.019647 Jy
! Clean residual min=-0.003785 max=0.005615 Jy/beam
! Clean residual mean=-0.000000 rms=0.000729 Jy/beam
! Combined flux in latest and established models = 0.135726 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 0.135726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060351Jy  sigma=1.262190
! Fit after  self-cal, rms=0.060343Jy  sigma=1.261928
! Inverting map 
! Added new window around map position (-0.6, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00510498 Jy
! Component: 100  -  total flux cleaned = 0.00829355 Jy
! Total flux subtracted in 100 components = 0.00829355 Jy
! Clean residual min=-0.003636 max=0.004081 Jy/beam
! Clean residual mean=-0.000000 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.144019 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 0.144019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059877Jy  sigma=1.251718
! Fit after  self-cal, rms=0.059866Jy  sigma=1.251285
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9062 mas, bmaj=2.044 mas, bpa=1.988 degrees
! Estimated noise=0.238114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314172 Jy
! Component: 100  -  total flux cleaned = 0.00402976 Jy
! Component: 150  -  total flux cleaned = 0.00427931 Jy
! Component: 200  -  total flux cleaned = 0.00454182 Jy
! Total flux subtracted in 200 components = 0.00454182 Jy
! Clean residual min=-0.003079 max=0.002586 Jy/beam
! Clean residual mean=-0.000000 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.148561 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 51 components and 0.148561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059614Jy  sigma=1.245927
! Fit after  self-cal, rms=0.059600Jy  sigma=1.245620
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9062 x 2.044 at 1.988 degrees (North through East)
! Clean map  min=-0.0030868  max=0.11085 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.89     KP        1.03     
!   LA        1.04     MK        1.12     NL        1.02     OV        0.95     
!   PT        0.93     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.90     KP        0.99     
!   LA        1.02     MK        1.07     NL        1.03     OV        0.94     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.94     KP        1.01     
!   LA        1.05     MK        1.04     NL        1.01     OV        0.98     
!   PT        0.94     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.05     HN        0.92     KP        1.01     
!   LA        1.03     MK        1.04     NL        1.05     OV        0.98     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.94     KP        1.02     
!   LA        1.05     MK        0.99     NL        1.04     OV        0.96     
!   PT        0.97     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.91     KP        1.05     
!   LA        1.01     MK        1.04     NL        1.05     OV        0.97     
!   PT        0.96     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.91     KP        1.07     
!   LA        1.04     MK        1.00     NL        1.02     OV        0.94     
!   PT        0.95     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.93     KP        1.04     
!   LA        1.03     MK        1.05     NL        1.03     OV        0.95     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.87     KP        1.07     
!   LA        1.03     MK        1.02     NL        1.02     OV        0.99     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.93     KP        1.06     
!   LA        1.06     MK        1.05     NL        1.02     OV        0.94     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.90     KP        1.01     
!   LA        1.05     MK        0.99     NL        1.03     OV        0.91     
!   PT        0.99     SC        1.13     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.91     KP        0.99     
!   LA        1.08     MK        0.97     NL        1.02     OV        0.95     
!   PT        0.93     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.059600Jy  sigma=1.245620
! Fit after  self-cal, rms=0.057920Jy  sigma=1.231663
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9055 mas, bmaj=2.054 mas, bpa=2.041 degrees
! Estimated noise=0.238061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.2, -7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120729 Jy
! Component: 100  -  total flux cleaned = 0.0017866 Jy
! Component: 150  -  total flux cleaned = 0.00197114 Jy
! Component: 200  -  total flux cleaned = 0.00209271 Jy
! Total flux subtracted in 200 components = 0.00209271 Jy
! Clean residual min=-0.001756 max=0.001707 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.150654 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 69 components and 0.150654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057838Jy  sigma=1.229839
! Fit after  self-cal, rms=0.057823Jy  sigma=1.229586
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057823Jy  sigma=1.229586
! Fit after  self-cal, rms=0.057954Jy  sigma=1.221734
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9048 mas, bmaj=2.054 mas, bpa=2.198 degrees
! Estimated noise=0.237557 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000425143 Jy
! Component: 100  -  total flux cleaned = -0.000475222 Jy
! Component: 150  -  total flux cleaned = -0.000472788 Jy
! Component: 200  -  total flux cleaned = -0.000471349 Jy
! Total flux subtracted in 200 components = -0.000471349 Jy
! Clean residual min=-0.001363 max=0.001240 Jy/beam
! Clean residual mean=-0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.150183 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 82 components and 0.150183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057935Jy  sigma=1.221251
! Fit after  self-cal, rms=0.057950Jy  sigma=1.221158
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.01407e-05 Jy
! Component: 100  -  total flux cleaned = -9.98426e-06 Jy
! Component: 150  -  total flux cleaned = -9.35067e-06 Jy
! Component: 200  -  total flux cleaned = 5.15758e-06 Jy
! Total flux subtracted in 200 components = 5.15758e-06 Jy
! Clean residual min=-0.001323 max=0.001236 Jy/beam
! Clean residual mean=-0.000001 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.150188 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.150188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057941Jy  sigma=1.220962
! Fit after  self-cal, rms=0.057941Jy  sigma=1.220952
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057941Jy  sigma=1.220952
! Fit after  self-cal, rms=0.057885Jy  sigma=1.220880
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9045 mas, bmaj=2.054 mas, bpa=2.264 degrees
! Estimated noise=0.237314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369152 Jy
! Component: 100  -  total flux cleaned = -0.000527932 Jy
! Component: 150  -  total flux cleaned = -0.000569662 Jy
! Component: 200  -  total flux cleaned = -0.000582285 Jy
! Total flux subtracted in 200 components = -0.000582285 Jy
! Clean residual min=-0.001268 max=0.001250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.149606 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.149606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057878Jy  sigma=1.220683
! Fit after  self-cal, rms=0.057879Jy  sigma=1.220674
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.01032e-05 Jy
! Component: 100  -  total flux cleaned = -1.02141e-05 Jy
! Component: 150  -  total flux cleaned = -1.06076e-05 Jy
! Component: 200  -  total flux cleaned = -1.0595e-05 Jy
! Total flux subtracted in 200 components = -1.0595e-05 Jy
! Clean residual min=-0.001247 max=0.001246 Jy/beam
! Clean residual mean=-0.000001 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.149595 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 112 components and 0.149595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057874Jy  sigma=1.220580
! Fit after  self-cal, rms=0.057875Jy  sigma=1.220577
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057875Jy  sigma=1.220577
! Fit after  self-cal, rms=0.057794Jy  sigma=1.220540
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.409 mas, bpa=2.439 degrees
! Estimated noise=0.296826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000302742 Jy
! Component: 100  -  total flux cleaned = -0.000439128 Jy
! Component: 150  -  total flux cleaned = -0.000519241 Jy
! Component: 200  -  total flux cleaned = -0.000545475 Jy
! Total flux subtracted in 200 components = -0.000545475 Jy
! Clean residual min=-0.001491 max=0.001440 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.149049 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 124 components and 0.149049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057793Jy  sigma=1.220473
! Fit after  self-cal, rms=0.057792Jy  sigma=1.220458
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.44326e-05 Jy
! Component: 100  -  total flux cleaned = -9.41054e-05 Jy
! Component: 150  -  total flux cleaned = -0.000109105 Jy
! Component: 200  -  total flux cleaned = -0.000136837 Jy
! Total flux subtracted in 200 components = -0.000136837 Jy
! Clean residual min=-0.001491 max=0.001427 Jy/beam
! Clean residual mean=-0.000001 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.148913 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 132 components and 0.148913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057793Jy  sigma=1.220447
! Fit after  self-cal, rms=0.057792Jy  sigma=1.220440
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9043 mas, bmaj=2.055 mas, bpa=2.305 degrees
! Estimated noise=0.237112 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9043 x 2.055 at 2.305 degrees (North through East)
! Clean map  min=-0.0011085  max=0.11089 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.711 mas, bmaj=1.727 mas, bpa=0.7597 degrees
! Estimated noise=0.333591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0860785 Jy
! Component: 100  -  total flux cleaned = 0.115511 Jy
! Component: 150  -  total flux cleaned = 0.127654 Jy
! Component: 200  -  total flux cleaned = 0.13388 Jy
! Total flux subtracted in 200 components = 0.13388 Jy
! Clean residual min=-0.002448 max=0.003181 Jy/beam
! Clean residual mean=-0.000000 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.13388 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.13388 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9043 mas, bmaj=2.055 mas, bpa=2.305 degrees
! Estimated noise=0.237112 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00496074 Jy
! Component: 100  -  total flux cleaned = 0.00791406 Jy
! Component: 150  -  total flux cleaned = 0.00995803 Jy
! Component: 200  -  total flux cleaned = 0.0115226 Jy
! Total flux subtracted in 200 components = 0.0115226 Jy
! Clean residual min=-0.001248 max=0.001231 Jy/beam
! Clean residual mean=-0.000001 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.145402 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 55 components and 0.145402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.409 mas, bpa=2.439 degrees
! Estimated noise=0.296826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151565 Jy
! Component: 100  -  total flux cleaned = 0.00230149 Jy
! Component: 150  -  total flux cleaned = 0.00271592 Jy
! Component: 200  -  total flux cleaned = 0.00304498 Jy
! Total flux subtracted in 200 components = 0.00304498 Jy
! Clean residual min=-0.001488 max=0.001506 Jy/beam
! Clean residual mean=-0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.148447 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117915 Jy
! Component: 100  -  total flux cleaned = 0.000204745 Jy
! Component: 150  -  total flux cleaned = 0.000282153 Jy
! Component: 200  -  total flux cleaned = 0.000364575 Jy
! Total flux subtracted in 200 components = 0.000364575 Jy
! Clean residual min=-0.001455 max=0.001475 Jy/beam
! Clean residual mean=-0.000001 rms=0.000375 Jy/beam
! Combined flux in latest and established models = 0.148812 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 114 components and 0.148812 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9043 mas, bmaj=2.055 mas, bpa=2.305 degrees
! Estimated noise=0.237112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000402096 Jy
! Component: 100  -  total flux cleaned = 0.000589195 Jy
! Component: 150  -  total flux cleaned = 0.000589786 Jy
! Component: 200  -  total flux cleaned = 0.000591459 Jy
! Total flux subtracted in 200 components = 0.000591459 Jy
! Clean residual min=-0.001129 max=0.001186 Jy/beam
! Clean residual mean=-0.000001 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.149403 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 127 components and 0.149403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057815Jy  sigma=1.220907
! Fit after  self-cal, rms=0.057810Jy  sigma=1.220861
wmodel J2219-0051_X_map.mod
! Writing 127 model components to file: J2219-0051_X_map.mod
wobs   J2219-0051_X_uvs.fits
! Writing UV FITS file: J2219-0051_X_uvs.fits
wwins  J2219-0051_X_map.win
! wwins: Wrote 4 windows to J2219-0051_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.7924e-05 Jy
! Component: 100  -  total flux cleaned = -1.33388e-05 Jy
! Component: 150  -  total flux cleaned = -7.20825e-05 Jy
! Component: 200  -  total flux cleaned = -5.36187e-05 Jy
! Component: 250  -  total flux cleaned = -9.03178e-05 Jy
! Component: 300  -  total flux cleaned = -9.02975e-05 Jy
! Component: 350  -  total flux cleaned = -7.28035e-05 Jy
! Component: 400  -  total flux cleaned = -9.00891e-05 Jy
! Component: 450  -  total flux cleaned = -5.68525e-05 Jy
! Component: 500  -  total flux cleaned = -0.000106368 Jy
! Component: 550  -  total flux cleaned = -9.01026e-05 Jy
! Component: 600  -  total flux cleaned = -0.00012166 Jy
! Component: 650  -  total flux cleaned = -9.04427e-05 Jy
! Component: 700  -  total flux cleaned = -9.03024e-05 Jy
! Component: 750  -  total flux cleaned = -4.45606e-05 Jy
! Component: 800  -  total flux cleaned = -7.48383e-05 Jy
! Component: 850  -  total flux cleaned = -7.47477e-05 Jy
! Component: 900  -  total flux cleaned = -3.10361e-05 Jy
! Component: 950  -  total flux cleaned = -0.000103453 Jy
! Component: 1000  -  total flux cleaned = -8.92351e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000103292 Jy
! Component: 1100  -  total flux cleaned = -0.000117477 Jy
! Component: 1150  -  total flux cleaned = -0.000117597 Jy
! Component: 1200  -  total flux cleaned = -0.000117466 Jy
! Component: 1250  -  total flux cleaned = -0.000103917 Jy
! Component: 1300  -  total flux cleaned = -0.00014393 Jy
! Component: 1350  -  total flux cleaned = -0.000117267 Jy
! Component: 1400  -  total flux cleaned = -0.000104239 Jy
! Component: 1450  -  total flux cleaned = -0.000117131 Jy
! Component: 1500  -  total flux cleaned = -9.14753e-05 Jy
! Component: 1550  -  total flux cleaned = -0.000116792 Jy
! Component: 1600  -  total flux cleaned = -9.15959e-05 Jy
! Component: 1650  -  total flux cleaned = -5.42822e-05 Jy
! Component: 1700  -  total flux cleaned = -4.22959e-05 Jy
! Component: 1750  -  total flux cleaned = -9.11672e-05 Jy
! Component: 1800  -  total flux cleaned = -6.6816e-05 Jy
! Component: 1850  -  total flux cleaned = -0.000102787 Jy
! Component: 1900  -  total flux cleaned = -0.000102924 Jy
! Component: 1950  -  total flux cleaned = -0.000103025 Jy
! Component: 2000  -  total flux cleaned = -0.000161718 Jy
! Component: 2050  -  total flux cleaned = -0.000150021 Jy
! Component: 2100  -  total flux cleaned = -0.000219248 Jy
! Component: 2150  -  total flux cleaned = -0.000207729 Jy
! Component: 2200  -  total flux cleaned = -0.000230368 Jy
! Component: 2250  -  total flux cleaned = -0.000207825 Jy
! Component: 2300  -  total flux cleaned = -0.000207892 Jy
! Component: 2350  -  total flux cleaned = -0.000174585 Jy
! Component: 2400  -  total flux cleaned = -0.000141443 Jy
! Component: 2450  -  total flux cleaned = -0.00014155 Jy
! Component: 2500  -  total flux cleaned = -0.000119833 Jy
! Component: 2550  -  total flux cleaned = -9.8288e-05 Jy
! Component: 2600  -  total flux cleaned = -9.81418e-05 Jy
! Component: 2650  -  total flux cleaned = -4.46617e-05 Jy
! Component: 2700  -  total flux cleaned = -1.277e-05 Jy
! Component: 2750  -  total flux cleaned = -2.2083e-06 Jy
! Component: 2800  -  total flux cleaned = 6.0579e-05 Jy
! Component: 2850  -  total flux cleaned = 7.09605e-05 Jy
! Component: 2900  -  total flux cleaned = 8.14135e-05 Jy
! Component: 2950  -  total flux cleaned = 0.000112358 Jy
! Component: 3000  -  total flux cleaned = 0.000143147 Jy
! Component: 3050  -  total flux cleaned = 0.000234543 Jy
! Component: 3100  -  total flux cleaned = 0.00022438 Jy
! Component: 3150  -  total flux cleaned = 0.000284595 Jy
! Component: 3200  -  total flux cleaned = 0.000314548 Jy
! Component: 3250  -  total flux cleaned = 0.000344395 Jy
! Component: 3300  -  total flux cleaned = 0.000413477 Jy
! Component: 3350  -  total flux cleaned = 0.00043305 Jy
! Component: 3400  -  total flux cleaned = 0.000472118 Jy
! Component: 3450  -  total flux cleaned = 0.000540015 Jy
! Component: 3500  -  total flux cleaned = 0.000549588 Jy
! Component: 3550  -  total flux cleaned = 0.000568775 Jy
! Component: 3600  -  total flux cleaned = 0.000549734 Jy
! Component: 3650  -  total flux cleaned = 0.000597216 Jy
! Component: 3700  -  total flux cleaned = 0.000616162 Jy
! Component: 3750  -  total flux cleaned = 0.000616202 Jy
! Component: 3800  -  total flux cleaned = 0.000653667 Jy
! Component: 3850  -  total flux cleaned = 0.000635124 Jy
! Component: 3900  -  total flux cleaned = 0.000635081 Jy
! Component: 3950  -  total flux cleaned = 0.000671953 Jy
! Component: 4000  -  total flux cleaned = 0.000690285 Jy
! Component: 4050  -  total flux cleaned = 0.000671902 Jy
! Total flux subtracted in 4096 components = 0.000699194 Jy
! Clean residual min=-0.000536 max=0.000562 Jy/beam
! Clean residual mean=-0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.150103 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 434 components and 0.150103 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2219-0051_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9043 x 2.055 at 2.305 degrees (North through East)
! Clean map  min=-0.00089491  max=0.11092 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2219-0051_X_map.fits
wmodel /vlbi/uf001/uva//J2219-0051_X_map.mod
! Writing 434 model components to file: /vlbi/uf001/uva//J2219-0051_X_map.mod
wobs   /vlbi/uf001/uva//J2219-0051_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2219-0051_X_uvs.fits
wwins  /vlbi/uf001/uva//J2219-0051_X_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2219-0051_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110919 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000159113 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.430349 0.430349 0.860699 1.7214 3.4428 6.88559 13.7712 27.5424 55.0847
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  697.107 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2219-0051_X_dfm.log closed on Mon Jan 14 06:14:36 2019