! Started logfile: /vlbi/uf001/uva//J2217+2421_X_dfm.log on Mon Jan 14 06:13:09 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2217+2421_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2217+2421_X_uva.fits ! AN table 1: 87 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972925 visibilities/baseline/integration-bin. ! Found source: J2217+2421 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 45708 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2217+2421_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.142182Jy sigma=20.422359 ! Fit after self-cal, rms=0.453143Jy sigma=8.246437 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6881 mas, bmaj=1.37 mas, bpa=-2.733 degrees ! Estimated noise=0.469968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.434069 Jy ! Component: 100 - total flux cleaned = 0.529492 Jy ! Total flux subtracted in 100 components = 0.529492 Jy ! Clean residual min=-0.018910 max=0.035926 Jy/beam ! Clean residual mean=0.000021 rms=0.004073 Jy/beam ! Combined flux in latest and established models = 0.529491 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.529491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114036Jy sigma=2.027278 ! Fit after self-cal, rms=0.113992Jy sigma=2.026782 ! Inverting map ! Added new window around map position (-0.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365472 Jy ! Component: 100 - total flux cleaned = 0.0474788 Jy ! Total flux subtracted in 100 components = 0.0474788 Jy ! Clean residual min=-0.016420 max=0.020382 Jy/beam ! Clean residual mean=0.000014 rms=0.003478 Jy/beam ! Combined flux in latest and established models = 0.57697 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.57697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101388Jy sigma=1.811307 ! Fit after self-cal, rms=0.100745Jy sigma=1.800147 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8568 mas, bmaj=1.645 mas, bpa=-0.9751 degrees ! Estimated noise=0.213477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185029 Jy ! Component: 100 - total flux cleaned = 0.0234233 Jy ! Component: 150 - total flux cleaned = 0.0244897 Jy ! Component: 200 - total flux cleaned = 0.0260072 Jy ! Total flux subtracted in 200 components = 0.0260072 Jy ! Clean residual min=-0.019414 max=0.019141 Jy/beam ! Clean residual mean=0.000023 rms=0.004125 Jy/beam ! Combined flux in latest and established models = 0.602978 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.602977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096614Jy sigma=1.724579 ! Fit after self-cal, rms=0.096368Jy sigma=1.720638 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8568 x 1.645 at -0.9751 degrees (North through East) ! Clean map min=-0.018515 max=0.55288 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 HN 0.93 KP 1.05 ! LA 0.89 MK 0.98 NL 1.18 OV 0.93 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.94 KP 1.05 ! LA 0.88 MK 0.98 NL 1.18 OV 0.91 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.94 KP 1.05 ! LA 0.89 MK 0.99 NL 1.14 OV 0.93 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.94 KP 1.08 ! LA 0.90 MK 0.99 NL 1.16 OV 0.92 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.93 KP 1.08 ! LA 0.90 MK 0.96 NL 1.15 OV 0.92 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 HN 0.93 KP 1.07 ! LA 0.89 MK 0.97 NL 1.16 OV 0.94 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.94 KP 1.07 ! LA 0.90 MK 0.99 NL 1.15 OV 0.92 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.95 KP 1.08 ! LA 0.91 MK 0.99 NL 1.16 OV 0.90 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.94 KP 1.06 ! LA 0.90 MK 1.00 NL 1.17 OV 0.92 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.94 KP 1.07 ! LA 0.90 MK 1.00 NL 1.15 OV 0.93 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 0.93 KP 1.06 ! LA 0.91 MK 0.99 NL 1.14 OV 0.93 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.94 KP 1.05 ! LA 0.89 MK 0.97 NL 1.19 OV 0.92 ! PT 1.00* SC 0.97 ! ! ! Fit before self-cal, rms=0.096368Jy sigma=1.720638 ! Fit after self-cal, rms=0.079099Jy sigma=1.351745 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8493 mas, bmaj=1.65 mas, bpa=-0.9575 degrees ! Estimated noise=0.21207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00319065 Jy ! Component: 100 - total flux cleaned = -0.00479839 Jy ! Component: 150 - total flux cleaned = -0.00532677 Jy ! Component: 200 - total flux cleaned = -0.0055072 Jy ! Total flux subtracted in 200 components = -0.0055072 Jy ! Clean residual min=-0.016757 max=0.010739 Jy/beam ! Clean residual mean=0.000004 rms=0.002943 Jy/beam ! Combined flux in latest and established models = 0.59747 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.59747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078665Jy sigma=1.344371 ! Fit after self-cal, rms=0.078634Jy sigma=1.343479 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078634Jy sigma=1.343479 ! Fit after self-cal, rms=0.057070Jy sigma=0.988517 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8452 mas, bmaj=1.653 mas, bpa=-0.6006 degrees ! Estimated noise=0.211968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422634 Jy ! Component: 100 - total flux cleaned = 0.000636376 Jy ! Component: 150 - total flux cleaned = 0.000632054 Jy ! Component: 200 - total flux cleaned = 0.000628006 Jy ! Total flux subtracted in 200 components = 0.000628006 Jy ! Clean residual min=-0.003226 max=0.006594 Jy/beam ! Clean residual mean=0.000001 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.598098 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.598098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056706Jy sigma=0.980996 ! Fit after self-cal, rms=0.056704Jy sigma=0.980487 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624904 Jy ! Component: 100 - total flux cleaned = 0.00997264 Jy ! Component: 150 - total flux cleaned = 0.0127373 Jy ! Component: 200 - total flux cleaned = 0.0150163 Jy ! Total flux subtracted in 200 components = 0.0150163 Jy ! Clean residual min=-0.002668 max=0.003515 Jy/beam ! Clean residual mean=0.000003 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.613114 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.613114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055873Jy sigma=0.965594 ! Fit after self-cal, rms=0.055856Jy sigma=0.965291 ! Inverting map ! Added new window around map position (-2.4, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028284 Jy ! Component: 100 - total flux cleaned = 0.0040574 Jy ! Component: 150 - total flux cleaned = 0.0051834 Jy ! Component: 200 - total flux cleaned = 0.00604828 Jy ! Total flux subtracted in 200 components = 0.00604828 Jy ! Clean residual min=-0.002336 max=0.002677 Jy/beam ! Clean residual mean=0.000004 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.619163 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.619163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055580Jy sigma=0.960163 ! Fit after self-cal, rms=0.055574Jy sigma=0.960068 ! Inverting map ! Added new window around map position (0.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013381 Jy ! Component: 100 - total flux cleaned = 0.0023681 Jy ! Component: 150 - total flux cleaned = 0.00313569 Jy ! Component: 200 - total flux cleaned = 0.00384921 Jy ! Total flux subtracted in 200 components = 0.00384921 Jy ! Clean residual min=-0.002283 max=0.002222 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.623012 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 92 components and 0.623012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055418Jy sigma=0.957170 ! Fit after self-cal, rms=0.055411Jy sigma=0.957055 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055411Jy sigma=0.957055 ! Fit after self-cal, rms=0.055312Jy sigma=0.955080 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8442 mas, bmaj=1.653 mas, bpa=-0.5381 degrees ! Estimated noise=0.21187 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613167 Jy ! Component: 100 - total flux cleaned = 0.00122602 Jy ! Component: 150 - total flux cleaned = 0.00181775 Jy ! Component: 200 - total flux cleaned = 0.00241273 Jy ! Total flux subtracted in 200 components = 0.00241273 Jy ! Clean residual min=-0.001843 max=0.001871 Jy/beam ! Clean residual mean=0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.625425 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 0.625425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055199Jy sigma=0.952901 ! Fit after self-cal, rms=0.055197Jy sigma=0.952848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744682 Jy ! Component: 100 - total flux cleaned = 0.000888061 Jy ! Component: 150 - total flux cleaned = 0.00102663 Jy ! Component: 200 - total flux cleaned = 0.00124222 Jy ! Total flux subtracted in 200 components = 0.00124222 Jy ! Clean residual min=-0.001762 max=0.001599 Jy/beam ! Clean residual mean=0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.626667 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 113 components and 0.626667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055111Jy sigma=0.951272 ! Fit after self-cal, rms=0.055109Jy sigma=0.951247 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055109Jy sigma=0.951247 ! Fit after self-cal, rms=0.055127Jy sigma=0.951020 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.907 mas, bmaj=2.486 mas, bpa=2.089 degrees ! Estimated noise=0.284281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145676 Jy ! Component: 100 - total flux cleaned = 0.00231322 Jy ! Component: 150 - total flux cleaned = 0.0030967 Jy ! Component: 200 - total flux cleaned = 0.00376573 Jy ! Total flux subtracted in 200 components = 0.00376573 Jy ! Clean residual min=-0.001697 max=0.001749 Jy/beam ! Clean residual mean=0.000005 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.630433 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 142 components and 0.630433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055092Jy sigma=0.950436 ! Fit after self-cal, rms=0.055090Jy sigma=0.950396 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000602123 Jy ! Component: 100 - total flux cleaned = 0.00103048 Jy ! Component: 150 - total flux cleaned = 0.00138939 Jy ! Component: 200 - total flux cleaned = 0.00162722 Jy ! Total flux subtracted in 200 components = 0.00162722 Jy ! Clean residual min=-0.001628 max=0.001653 Jy/beam ! Clean residual mean=0.000005 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.63206 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 152 components and 0.63206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055081Jy sigma=0.950283 ! Fit after self-cal, rms=0.055080Jy sigma=0.950270 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8436 mas, bmaj=1.653 mas, bpa=-0.524 degrees ! Estimated noise=0.211952 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8436 x 1.653 at -0.524 degrees (North through East) ! Clean map min=-0.0016248 max=0.55065 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055080Jy sigma=0.950270 ! Fit after self-cal, rms=0.051631Jy sigma=0.876662 ! Inverting map and beam ! Estimated beam: bmin=0.8434 mas, bmaj=1.653 mas, bpa=-0.5282 degrees ! Estimated noise=0.212072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103822 Jy ! Component: 100 - total flux cleaned = -1.87697e-05 Jy ! Component: 150 - total flux cleaned = -0.000242917 Jy ! Component: 200 - total flux cleaned = -0.000347085 Jy ! Total flux subtracted in 200 components = -0.000347085 Jy ! Clean residual min=-0.001546 max=0.001488 Jy/beam ! Clean residual mean=0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.631713 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 159 components and 0.631713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051580Jy sigma=0.875568 ! Fit after self-cal, rms=0.051579Jy sigma=0.875540 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.04455e-06 Jy ! Component: 100 - total flux cleaned = -3.32615e-05 Jy ! Component: 150 - total flux cleaned = -3.36446e-05 Jy ! Component: 200 - total flux cleaned = -8.98587e-05 Jy ! Total flux subtracted in 200 components = -8.98587e-05 Jy ! Clean residual min=-0.001507 max=0.001458 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.631623 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 164 components and 0.631623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051548Jy sigma=0.874943 ! Fit after self-cal, rms=0.051548Jy sigma=0.874930 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051548Jy sigma=0.874930 ! Fit after self-cal, rms=0.051556Jy sigma=0.874833 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6779 mas, bmaj=1.375 mas, bpa=-2.157 degrees ! Estimated noise=0.464852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.429065 Jy ! Component: 100 - total flux cleaned = 0.524791 Jy ! Component: 150 - total flux cleaned = 0.56015 Jy ! Component: 200 - total flux cleaned = 0.577908 Jy ! Total flux subtracted in 200 components = 0.577908 Jy ! Clean residual min=-0.006629 max=0.008594 Jy/beam ! Clean residual mean=0.000002 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.577908 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.577908 Jy ! Inverting map and beam ! Estimated beam: bmin=0.843 mas, bmaj=1.653 mas, bpa=-0.5095 degrees ! Estimated noise=0.21211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124745 Jy ! Component: 100 - total flux cleaned = 0.0181253 Jy ! Component: 150 - total flux cleaned = 0.0229648 Jy ! Component: 200 - total flux cleaned = 0.0274259 Jy ! Total flux subtracted in 200 components = 0.0274259 Jy ! Clean residual min=-0.003266 max=0.003511 Jy/beam ! Clean residual mean=0.000001 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.605334 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 35 components and 0.605334 Jy ! Inverting map ! Added new window around map position (-1, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364092 Jy ! Component: 100 - total flux cleaned = 0.00676654 Jy ! Component: 150 - total flux cleaned = 0.00964923 Jy ! Component: 200 - total flux cleaned = 0.0121849 Jy ! Total flux subtracted in 200 components = 0.0121849 Jy ! Clean residual min=-0.002285 max=0.002307 Jy/beam ! Clean residual mean=0.000001 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.617519 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 52 components and 0.617519 Jy ! Inverting map ! Added new window around map position (-18.8, -42.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220645 Jy ! Component: 100 - total flux cleaned = 0.00414575 Jy ! Component: 150 - total flux cleaned = 0.00580732 Jy ! Component: 200 - total flux cleaned = 0.00707949 Jy ! Total flux subtracted in 200 components = 0.00707949 Jy ! Clean residual min=-0.001917 max=0.001776 Jy/beam ! Clean residual mean=0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.624599 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 73 components and 0.624599 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=2.486 mas, bpa=2.118 degrees ! Estimated noise=0.284747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303447 Jy ! Component: 100 - total flux cleaned = 0.0051404 Jy ! Component: 150 - total flux cleaned = 0.00648597 Jy ! Component: 200 - total flux cleaned = 0.0072803 Jy ! Total flux subtracted in 200 components = 0.0072803 Jy ! Clean residual min=-0.001578 max=0.001960 Jy/beam ! Clean residual mean=0.000004 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.631879 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538589 Jy ! Component: 100 - total flux cleaned = 0.00106218 Jy ! Component: 150 - total flux cleaned = 0.00145688 Jy ! Component: 200 - total flux cleaned = 0.00181554 Jy ! Total flux subtracted in 200 components = 0.00181554 Jy ! Clean residual min=-0.001443 max=0.001771 Jy/beam ! Clean residual mean=0.000004 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.633695 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 134 components and 0.633695 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.843 mas, bmaj=1.653 mas, bpa=-0.5095 degrees ! Estimated noise=0.21211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724001 Jy ! Component: 100 - total flux cleaned = 0.000900491 Jy ! Component: 150 - total flux cleaned = 0.00100486 Jy ! Component: 200 - total flux cleaned = 0.000956472 Jy ! Total flux subtracted in 200 components = 0.000956472 Jy ! Clean residual min=-0.001487 max=0.001395 Jy/beam ! Clean residual mean=0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.634651 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.634651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051603Jy sigma=0.876177 ! Fit after self-cal, rms=0.051585Jy sigma=0.875703 wmodel J2217+2421_X_map.mod ! Writing 149 model components to file: J2217+2421_X_map.mod wobs J2217+2421_X_uvs.fits ! Writing UV FITS file: J2217+2421_X_uvs.fits wwins J2217+2421_X_map.win ! wwins: Wrote 8 windows to J2217+2421_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00024416 Jy ! Component: 100 - total flux cleaned = -0.000367051 Jy ! Component: 150 - total flux cleaned = -0.000436807 Jy ! Component: 200 - total flux cleaned = -0.000481485 Jy ! Component: 250 - total flux cleaned = -0.000546453 Jy ! Component: 300 - total flux cleaned = -0.000504516 Jy ! Component: 350 - total flux cleaned = -0.000504645 Jy ! Component: 400 - total flux cleaned = -0.000425078 Jy ! Component: 450 - total flux cleaned = -0.000367051 Jy ! Component: 500 - total flux cleaned = -0.000271653 Jy ! Component: 550 - total flux cleaned = -0.000234493 Jy ! Component: 600 - total flux cleaned = -0.000106943 Jy ! Component: 650 - total flux cleaned = -5.32506e-05 Jy ! Component: 700 - total flux cleaned = 5.25686e-05 Jy ! Component: 750 - total flux cleaned = 0.000156353 Jy ! Component: 800 - total flux cleaned = 0.000292184 Jy ! Component: 850 - total flux cleaned = 0.000408997 Jy ! Component: 900 - total flux cleaned = 0.000491067 Jy ! Component: 950 - total flux cleaned = 0.00058849 Jy ! Component: 1000 - total flux cleaned = 0.000731181 Jy ! Component: 1050 - total flux cleaned = 0.000746531 Jy ! Component: 1100 - total flux cleaned = 0.000792437 Jy ! Component: 1150 - total flux cleaned = 0.000822656 Jy ! Component: 1200 - total flux cleaned = 0.000897353 Jy ! Component: 1250 - total flux cleaned = 0.000868082 Jy ! Component: 1300 - total flux cleaned = 0.00092586 Jy ! Component: 1350 - total flux cleaned = 0.000925641 Jy ! Component: 1400 - total flux cleaned = 0.000953823 Jy ! Component: 1450 - total flux cleaned = 0.000995575 Jy ! Component: 1500 - total flux cleaned = 0.00103684 Jy ! Component: 1550 - total flux cleaned = 0.00106397 Jy ! Component: 1600 - total flux cleaned = 0.00110416 Jy ! Component: 1650 - total flux cleaned = 0.00115708 Jy ! Component: 1700 - total flux cleaned = 0.00119596 Jy ! Component: 1750 - total flux cleaned = 0.00124741 Jy ! Component: 1800 - total flux cleaned = 0.00128553 Jy ! Component: 1850 - total flux cleaned = 0.00129817 Jy ! Component: 1900 - total flux cleaned = 0.00133527 Jy ! Component: 1950 - total flux cleaned = 0.00138448 Jy ! Component: 2000 - total flux cleaned = 0.00144501 Jy ! Component: 2050 - total flux cleaned = 0.00142097 Jy ! Component: 2100 - total flux cleaned = 0.00142097 Jy ! Component: 2150 - total flux cleaned = 0.00145632 Jy ! Component: 2200 - total flux cleaned = 0.00145633 Jy ! Component: 2250 - total flux cleaned = 0.00145628 Jy ! Component: 2300 - total flux cleaned = 0.00144511 Jy ! Component: 2350 - total flux cleaned = 0.00146772 Jy ! Component: 2400 - total flux cleaned = 0.00152351 Jy ! Component: 2450 - total flux cleaned = 0.00150142 Jy ! Component: 2500 - total flux cleaned = 0.00149031 Jy ! Component: 2550 - total flux cleaned = 0.00154475 Jy ! Component: 2600 - total flux cleaned = 0.00153376 Jy ! Component: 2650 - total flux cleaned = 0.0015444 Jy ! Component: 2700 - total flux cleaned = 0.00151265 Jy ! Component: 2750 - total flux cleaned = 0.00150224 Jy ! Component: 2800 - total flux cleaned = 0.00150222 Jy ! Component: 2850 - total flux cleaned = 0.0014712 Jy ! Component: 2900 - total flux cleaned = 0.00145066 Jy ! Component: 2950 - total flux cleaned = 0.00145063 Jy ! Component: 3000 - total flux cleaned = 0.00146081 Jy ! Component: 3050 - total flux cleaned = 0.00144067 Jy ! Component: 3100 - total flux cleaned = 0.00145056 Jy ! Component: 3150 - total flux cleaned = 0.00139154 Jy ! Component: 3200 - total flux cleaned = 0.00140145 Jy ! Component: 3250 - total flux cleaned = 0.00140146 Jy ! Component: 3300 - total flux cleaned = 0.00136284 Jy ! Component: 3350 - total flux cleaned = 0.00136296 Jy ! Component: 3400 - total flux cleaned = 0.00137228 Jy ! Component: 3450 - total flux cleaned = 0.00135357 Jy ! Component: 3500 - total flux cleaned = 0.00132547 Jy ! Component: 3550 - total flux cleaned = 0.00135317 Jy ! Component: 3600 - total flux cleaned = 0.00131656 Jy ! Component: 3650 - total flux cleaned = 0.00133486 Jy ! Component: 3700 - total flux cleaned = 0.0012986 Jy ! Component: 3750 - total flux cleaned = 0.00128967 Jy ! Component: 3800 - total flux cleaned = 0.00131644 Jy ! Component: 3850 - total flux cleaned = 0.00132537 Jy ! Component: 3900 - total flux cleaned = 0.00134298 Jy ! Component: 3950 - total flux cleaned = 0.00139542 Jy ! Component: 4000 - total flux cleaned = 0.00138675 Jy ! Component: 4050 - total flux cleaned = 0.00137805 Jy ! Total flux subtracted in 4096 components = 0.00140385 Jy ! Clean residual min=-0.000459 max=0.000433 Jy/beam ! Clean residual mean=0.000000 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.636055 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 478 components and 0.636056 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2217+2421_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.843 x 1.653 at -0.5095 degrees (North through East) ! Clean map min=-0.0010505 max=0.5499 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2217+2421_X_map.fits wmodel /vlbi/uf001/uva//J2217+2421_X_map.mod ! Writing 478 model components to file: /vlbi/uf001/uva//J2217+2421_X_map.mod wobs /vlbi/uf001/uva//J2217+2421_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2217+2421_X_uvs.fits wwins /vlbi/uf001/uva//J2217+2421_X_map.win ! wwins: Wrote 9 windows to /vlbi/uf001/uva//J2217+2421_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.549895 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149155 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0813728 0.0813728 0.162746 0.325491 0.650982 1.30196 2.60393 5.20786 10.4157 20.8314 41.6629 83.3257 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.549 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3686.74 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2217+2421_X_dfm.log closed on Mon Jan 14 06:13:16 2019