! Started logfile: /vlbi/uf001/uva//J2216+3102_X_dfm.log on Mon Jan 14 06:12:57 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2216+3102_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2216+3102_X_uva.fits ! AN table 1: 42 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.83664 visibilities/baseline/integration-bin. ! Found source: J2216+3102 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 15180 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2216+3102_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024289Jy sigma=23.097003 ! Fit after self-cal, rms=0.827257Jy sigma=18.482045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7871 mas, bmaj=1.249 mas, bpa=-2.541 degrees ! Estimated noise=0.508704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122875 Jy ! Component: 100 - total flux cleaned = 0.176318 Jy ! Total flux subtracted in 100 components = 0.176318 Jy ! Clean residual min=-0.013230 max=0.041105 Jy/beam ! Clean residual mean=-0.000038 rms=0.003422 Jy/beam ! Combined flux in latest and established models = 0.176318 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.176318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099185Jy sigma=2.198690 ! Fit after self-cal, rms=0.098914Jy sigma=2.193029 ! Inverting map ! Added new window around map position (1, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406753 Jy ! Component: 100 - total flux cleaned = 0.0654821 Jy ! Total flux subtracted in 100 components = 0.0654821 Jy ! Clean residual min=-0.007937 max=0.015226 Jy/beam ! Clean residual mean=-0.000026 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.2418 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.2418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073609Jy sigma=1.604893 ! Fit after self-cal, rms=0.072708Jy sigma=1.584023 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190767 Jy ! Component: 100 - total flux cleaned = 0.0306179 Jy ! Total flux subtracted in 100 components = 0.0306179 Jy ! Clean residual min=-0.007133 max=0.008659 Jy/beam ! Clean residual mean=-0.000020 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.272418 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.272418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065315Jy sigma=1.406654 ! Fit after self-cal, rms=0.064950Jy sigma=1.398233 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00974626 Jy ! Component: 100 - total flux cleaned = 0.0162107 Jy ! Total flux subtracted in 100 components = 0.0162107 Jy ! Clean residual min=-0.006355 max=0.008027 Jy/beam ! Clean residual mean=-0.000017 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.288629 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 34 components and 0.288629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062638Jy sigma=1.340894 ! Fit after self-cal, rms=0.062521Jy sigma=1.338085 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9694 mas, bmaj=1.542 mas, bpa=0.4488 degrees ! Estimated noise=0.280675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00913682 Jy ! Component: 100 - total flux cleaned = 0.0152111 Jy ! Component: 150 - total flux cleaned = 0.0196096 Jy ! Component: 200 - total flux cleaned = 0.0229 Jy ! Total flux subtracted in 200 components = 0.0229 Jy ! Clean residual min=-0.005607 max=0.008623 Jy/beam ! Clean residual mean=-0.000025 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.311529 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.311529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060999Jy sigma=1.297246 ! Fit after self-cal, rms=0.060968Jy sigma=1.295979 ! Inverting map ! Added new window around map position (0, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00742346 Jy ! Component: 100 - total flux cleaned = 0.0109895 Jy ! Component: 150 - total flux cleaned = 0.0126109 Jy ! Component: 200 - total flux cleaned = 0.0142245 Jy ! Total flux subtracted in 200 components = 0.0142245 Jy ! Clean residual min=-0.005382 max=0.007691 Jy/beam ! Clean residual mean=-0.000018 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.325753 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.325753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059947Jy sigma=1.270008 ! Fit after self-cal, rms=0.059862Jy sigma=1.267460 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9694 x 1.542 at 0.4488 degrees (North through East) ! Clean map min=-0.0051939 max=0.16632 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.97 KP 1.01 LA 0.98 ! MK 1.04 NL 1.10 OV 0.90 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 0.98 KP 1.03 LA 0.99 ! MK 1.01 NL 1.10 OV 0.88 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 0.92 KP 1.00 LA 0.99 ! MK 0.99 NL 1.10 OV 0.91 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 HN 0.92 KP 1.02 LA 1.00 ! MK 1.03 NL 1.08 OV 0.91 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 0.96 KP 1.02 LA 1.00 ! MK 1.04 NL 1.08 OV 0.90 PT 0.94 ! SC 0.95 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.95 KP 1.03 LA 1.00 ! MK 1.01 NL 1.11 OV 0.90 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 0.96 KP 1.02 LA 1.03 ! MK 1.01 NL 1.08 OV 0.90 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 HN 0.95 KP 1.05 LA 1.00 ! MK 1.06 NL 1.09 OV 0.90 PT 0.94 ! SC 0.97 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 1.01 KP 1.02 LA 1.01 ! MK 0.98 NL 1.08 OV 0.91 PT 0.95 ! SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 HN 0.97 KP 1.03 LA 1.02 ! MK 1.01 NL 1.08 OV 0.92 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 HN 0.98 KP 1.04 LA 1.00 ! MK 0.99 NL 1.07 OV 0.92 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 HN 1.00 KP 1.02 LA 1.02 ! MK 1.01 NL 1.11 OV 0.88 PT 0.97 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.059862Jy sigma=1.267460 ! Fit after self-cal, rms=0.057041Jy sigma=1.200693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9644 mas, bmaj=1.547 mas, bpa=0.7943 degrees ! Estimated noise=0.279638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0025611 Jy ! Component: 100 - total flux cleaned = -0.00318931 Jy ! Component: 150 - total flux cleaned = -0.00370246 Jy ! Component: 200 - total flux cleaned = -0.00413438 Jy ! Total flux subtracted in 200 components = -0.00413438 Jy ! Clean residual min=-0.002810 max=0.003216 Jy/beam ! Clean residual mean=-0.000003 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.321619 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.321619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056790Jy sigma=1.194716 ! Fit after self-cal, rms=0.056801Jy sigma=1.194269 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056801Jy sigma=1.194269 ! Fit after self-cal, rms=0.056815Jy sigma=1.177410 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9609 mas, bmaj=1.55 mas, bpa=1.965 degrees ! Estimated noise=0.279548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192761 Jy ! Component: 100 - total flux cleaned = -0.00221754 Jy ! Component: 150 - total flux cleaned = -0.0026725 Jy ! Component: 200 - total flux cleaned = -0.00297622 Jy ! Total flux subtracted in 200 components = -0.00297622 Jy ! Clean residual min=-0.001825 max=0.002233 Jy/beam ! Clean residual mean=-0.000002 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.318642 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.318642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056694Jy sigma=1.174814 ! Fit after self-cal, rms=0.056692Jy sigma=1.174584 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00232716 Jy ! Component: 100 - total flux cleaned = 0.00266814 Jy ! Component: 150 - total flux cleaned = 0.00247035 Jy ! Component: 200 - total flux cleaned = 0.0023349 Jy ! Total flux subtracted in 200 components = 0.0023349 Jy ! Clean residual min=-0.001712 max=0.001942 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.320977 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 0.320977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056557Jy sigma=1.171716 ! Fit after self-cal, rms=0.056545Jy sigma=1.171504 ! Inverting map ! Added new window around map position (-1, 8.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122122 Jy ! Component: 100 - total flux cleaned = 0.00117027 Jy ! Component: 150 - total flux cleaned = 0.00108203 Jy ! Component: 200 - total flux cleaned = 0.00091966 Jy ! Total flux subtracted in 200 components = 0.00091966 Jy ! Clean residual min=-0.001571 max=0.001667 Jy/beam ! Clean residual mean=-0.000001 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.321897 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 0.321897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056457Jy sigma=1.169615 ! Fit after self-cal, rms=0.056447Jy sigma=1.169508 ! Inverting map ! Added new window around map position (12.4, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124536 Jy ! Component: 100 - total flux cleaned = 0.00136771 Jy ! Component: 150 - total flux cleaned = 0.00136651 Jy ! Component: 200 - total flux cleaned = 0.00129778 Jy ! Total flux subtracted in 200 components = 0.00129778 Jy ! Clean residual min=-0.001474 max=0.001545 Jy/beam ! Clean residual mean=-0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.323195 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 138 components and 0.323195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056382Jy sigma=1.168264 ! Fit after self-cal, rms=0.056377Jy sigma=1.168218 ! Inverting map ! Added new window around map position (-1.6, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000997396 Jy ! Component: 100 - total flux cleaned = 0.00120186 Jy ! Component: 150 - total flux cleaned = 0.00117016 Jy ! Component: 200 - total flux cleaned = 0.00119997 Jy ! Total flux subtracted in 200 components = 0.00119997 Jy ! Clean residual min=-0.001384 max=0.001452 Jy/beam ! Clean residual mean=-0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.324395 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 151 components and 0.324395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056331Jy sigma=1.167169 ! Fit after self-cal, rms=0.056325Jy sigma=1.167104 ! Inverting map ! Added new window around map position (-1.2, -12.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922206 Jy ! Component: 100 - total flux cleaned = 0.000988071 Jy ! Component: 150 - total flux cleaned = 0.00108075 Jy ! Component: 200 - total flux cleaned = 0.00122812 Jy ! Total flux subtracted in 200 components = 0.00122812 Jy ! Clean residual min=-0.001304 max=0.001195 Jy/beam ! Clean residual mean=-0.000001 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.325623 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 168 components and 0.325623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056278Jy sigma=1.166077 ! Fit after self-cal, rms=0.056275Jy sigma=1.166036 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056275Jy sigma=1.166036 ! Fit after self-cal, rms=0.056250Jy sigma=1.165645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9597 mas, bmaj=1.548 mas, bpa=1.94 degrees ! Estimated noise=0.279312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291312 Jy ! Component: 100 - total flux cleaned = 0.0004759 Jy ! Component: 150 - total flux cleaned = 0.0006454 Jy ! Component: 200 - total flux cleaned = 0.00072304 Jy ! Total flux subtracted in 200 components = 0.00072304 Jy ! Clean residual min=-0.001164 max=0.001216 Jy/beam ! Clean residual mean=-0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.326346 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 177 components and 0.326346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056220Jy sigma=1.165020 ! Fit after self-cal, rms=0.056220Jy sigma=1.165010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.6, -33.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327618 Jy ! Component: 100 - total flux cleaned = 0.000323552 Jy ! Component: 150 - total flux cleaned = 0.000322283 Jy ! Component: 200 - total flux cleaned = 0.000423171 Jy ! Total flux subtracted in 200 components = 0.000423171 Jy ! Clean residual min=-0.001108 max=0.001136 Jy/beam ! Clean residual mean=-0.000000 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.326769 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 0.326769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056183Jy sigma=1.164143 ! Fit after self-cal, rms=0.056181Jy sigma=1.164121 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056181Jy sigma=1.164121 ! Fit after self-cal, rms=0.056166Jy sigma=1.164073 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.962 mas, bmaj=2.596 mas, bpa=-5.297 degrees ! Estimated noise=0.354617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6196e-05 Jy ! Component: 100 - total flux cleaned = 0.000128917 Jy ! Component: 150 - total flux cleaned = 0.000257202 Jy ! Component: 200 - total flux cleaned = 0.000388061 Jy ! Total flux subtracted in 200 components = 0.000388061 Jy ! Clean residual min=-0.001009 max=0.001084 Jy/beam ! Clean residual mean=-0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.327157 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 220 components and 0.327157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056157Jy sigma=1.163925 ! Fit after self-cal, rms=0.056156Jy sigma=1.163909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18832e-05 Jy ! Component: 100 - total flux cleaned = 0.000261544 Jy ! Component: 150 - total flux cleaned = 0.00037016 Jy ! Component: 200 - total flux cleaned = 0.000495748 Jy ! Total flux subtracted in 200 components = 0.000495748 Jy ! Clean residual min=-0.000968 max=0.001069 Jy/beam ! Clean residual mean=-0.000000 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.327653 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 241 components and 0.327653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056151Jy sigma=1.163851 ! Fit after self-cal, rms=0.056150Jy sigma=1.163845 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9595 mas, bmaj=1.547 mas, bpa=1.922 degrees ! Estimated noise=0.279247 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9595 x 1.547 at 1.922 degrees (North through East) ! Clean map min=-0.0017148 max=0.16557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7794 mas, bmaj=1.251 mas, bpa=-0.3524 degrees ! Estimated noise=0.50494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124688 Jy ! Component: 100 - total flux cleaned = 0.184511 Jy ! Component: 150 - total flux cleaned = 0.221582 Jy ! Component: 200 - total flux cleaned = 0.245499 Jy ! Total flux subtracted in 200 components = 0.245499 Jy ! Clean residual min=-0.006373 max=0.012903 Jy/beam ! Clean residual mean=-0.000017 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.245499 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.245499 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9595 mas, bmaj=1.547 mas, bpa=1.922 degrees ! Estimated noise=0.279247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229477 Jy ! Component: 100 - total flux cleaned = 0.036364 Jy ! Component: 150 - total flux cleaned = 0.0449324 Jy ! Component: 200 - total flux cleaned = 0.0512332 Jy ! Total flux subtracted in 200 components = 0.0512332 Jy ! Clean residual min=-0.002511 max=0.003946 Jy/beam ! Clean residual mean=-0.000012 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.296732 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 49 components and 0.296732 Jy ! Inverting map ! Added new window around map position (-19.2, 41.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049619 Jy ! Component: 100 - total flux cleaned = 0.00887924 Jy ! Component: 150 - total flux cleaned = 0.0120836 Jy ! Component: 200 - total flux cleaned = 0.0142714 Jy ! Total flux subtracted in 200 components = 0.0142714 Jy ! Clean residual min=-0.002002 max=0.002201 Jy/beam ! Clean residual mean=-0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.311004 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 77 components and 0.311004 Jy ! Inverting map ! Added new window around map position (-10.4, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179975 Jy ! Component: 100 - total flux cleaned = 0.00331013 Jy ! Component: 150 - total flux cleaned = 0.00443953 Jy ! Component: 200 - total flux cleaned = 0.0055414 Jy ! Total flux subtracted in 200 components = 0.0055414 Jy ! Clean residual min=-0.001591 max=0.001691 Jy/beam ! Clean residual mean=-0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.316545 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 95 components and 0.316545 Jy ! Inverting map ! Added new window around map position (10.2, 22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155814 Jy ! Component: 100 - total flux cleaned = 0.00256335 Jy ! Component: 150 - total flux cleaned = 0.00338071 Jy ! Component: 200 - total flux cleaned = 0.00408555 Jy ! Total flux subtracted in 200 components = 0.00408555 Jy ! Clean residual min=-0.001325 max=0.001454 Jy/beam ! Clean residual mean=-0.000003 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.32063 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 114 components and 0.32063 Jy ! Inverting map ! Added new window around map position (10, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142532 Jy ! Component: 100 - total flux cleaned = 0.00201697 Jy ! Component: 150 - total flux cleaned = 0.00244259 Jy ! Component: 200 - total flux cleaned = 0.00272451 Jy ! Total flux subtracted in 200 components = 0.00272451 Jy ! Clean residual min=-0.001233 max=0.001257 Jy/beam ! Clean residual mean=-0.000002 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.323355 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 145 components and 0.323355 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.962 mas, bmaj=2.596 mas, bpa=-5.297 degrees ! Estimated noise=0.354617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122987 Jy ! Component: 100 - total flux cleaned = 0.0015303 Jy ! Component: 150 - total flux cleaned = 0.00158717 Jy ! Component: 200 - total flux cleaned = 0.00171855 Jy ! Total flux subtracted in 200 components = 0.00171855 Jy ! Clean residual min=-0.001073 max=0.001086 Jy/beam ! Clean residual mean=-0.000001 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.325073 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236744 Jy ! Component: 100 - total flux cleaned = 0.000498192 Jy ! Component: 150 - total flux cleaned = 0.000699364 Jy ! Component: 200 - total flux cleaned = 0.000886876 Jy ! Total flux subtracted in 200 components = 0.000886876 Jy ! Clean residual min=-0.001001 max=0.000978 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.32596 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 205 components and 0.32596 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9595 mas, bmaj=1.547 mas, bpa=1.922 degrees ! Estimated noise=0.279247 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500899 Jy ! Component: 100 - total flux cleaned = -0.000504782 Jy ! Component: 150 - total flux cleaned = -0.000504797 Jy ! Component: 200 - total flux cleaned = -0.000326391 Jy ! Total flux subtracted in 200 components = -0.000326391 Jy ! Clean residual min=-0.001064 max=0.001046 Jy/beam ! Clean residual mean=-0.000001 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.325634 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 224 components and 0.325634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056147Jy sigma=1.163514 ! Fit after self-cal, rms=0.056126Jy sigma=1.163071 wmodel J2216+3102_X_map.mod ! Writing 224 model components to file: J2216+3102_X_map.mod wobs J2216+3102_X_uvs.fits ! Writing UV FITS file: J2216+3102_X_uvs.fits wwins J2216+3102_X_map.win ! wwins: Wrote 13 windows to J2216+3102_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177403 Jy ! Component: 100 - total flux cleaned = -0.000269908 Jy ! Component: 150 - total flux cleaned = -0.000429547 Jy ! Component: 200 - total flux cleaned = -0.000618544 Jy ! Component: 250 - total flux cleaned = -0.000718961 Jy ! Component: 300 - total flux cleaned = -0.000784771 Jy ! Component: 350 - total flux cleaned = -0.000816475 Jy ! Component: 400 - total flux cleaned = -0.000784818 Jy ! Component: 450 - total flux cleaned = -0.000784818 Jy ! Component: 500 - total flux cleaned = -0.00081519 Jy ! Component: 550 - total flux cleaned = -0.000845164 Jy ! Component: 600 - total flux cleaned = -0.000874749 Jy ! Component: 650 - total flux cleaned = -0.000918427 Jy ! Component: 700 - total flux cleaned = -0.000961185 Jy ! Component: 750 - total flux cleaned = -0.000989509 Jy ! Component: 800 - total flux cleaned = -0.0010316 Jy ! Component: 850 - total flux cleaned = -0.00101767 Jy ! Component: 900 - total flux cleaned = -0.0010313 Jy ! Component: 950 - total flux cleaned = -0.00100441 Jy ! Component: 1000 - total flux cleaned = -0.0010579 Jy ! Component: 1050 - total flux cleaned = -0.00104472 Jy ! Component: 1100 - total flux cleaned = -0.00105786 Jy ! Component: 1150 - total flux cleaned = -0.00110959 Jy ! Component: 1200 - total flux cleaned = -0.00109642 Jy ! Component: 1250 - total flux cleaned = -0.00109643 Jy ! Component: 1300 - total flux cleaned = -0.00109652 Jy ! Component: 1350 - total flux cleaned = -0.00108391 Jy ! Component: 1400 - total flux cleaned = -0.0011209 Jy ! Component: 1450 - total flux cleaned = -0.00109618 Jy ! Component: 1500 - total flux cleaned = -0.00112057 Jy ! Component: 1550 - total flux cleaned = -0.00113278 Jy ! Component: 1600 - total flux cleaned = -0.00115657 Jy ! Component: 1650 - total flux cleaned = -0.00112089 Jy ! Component: 1700 - total flux cleaned = -0.00119167 Jy ! Component: 1750 - total flux cleaned = -0.00117994 Jy ! Component: 1800 - total flux cleaned = -0.00121477 Jy ! Component: 1850 - total flux cleaned = -0.00121478 Jy ! Component: 1900 - total flux cleaned = -0.00122619 Jy ! Component: 1950 - total flux cleaned = -0.00124905 Jy ! Component: 2000 - total flux cleaned = -0.0012378 Jy ! Component: 2050 - total flux cleaned = -0.0012715 Jy ! Component: 2100 - total flux cleaned = -0.00128246 Jy ! Component: 2150 - total flux cleaned = -0.00124918 Jy ! Component: 2200 - total flux cleaned = -0.00126007 Jy ! Component: 2250 - total flux cleaned = -0.00123829 Jy ! Component: 2300 - total flux cleaned = -0.0013034 Jy ! Component: 2350 - total flux cleaned = -0.00129271 Jy ! Component: 2400 - total flux cleaned = -0.00128205 Jy ! Component: 2450 - total flux cleaned = -0.00132446 Jy ! Component: 2500 - total flux cleaned = -0.00128227 Jy ! Component: 2550 - total flux cleaned = -0.00127174 Jy ! Component: 2600 - total flux cleaned = -0.0012822 Jy ! Component: 2650 - total flux cleaned = -0.00131332 Jy ! Component: 2700 - total flux cleaned = -0.00128241 Jy ! Component: 2750 - total flux cleaned = -0.00126191 Jy ! Component: 2800 - total flux cleaned = -0.00130269 Jy ! Component: 2850 - total flux cleaned = -0.00125212 Jy ! Component: 2900 - total flux cleaned = -0.00129228 Jy ! Component: 2950 - total flux cleaned = -0.00127227 Jy ! Component: 3000 - total flux cleaned = -0.00129212 Jy ! Component: 3050 - total flux cleaned = -0.00132169 Jy ! Component: 3100 - total flux cleaned = -0.00130203 Jy ! Component: 3150 - total flux cleaned = -0.00128242 Jy ! Component: 3200 - total flux cleaned = -0.00132131 Jy ! Component: 3250 - total flux cleaned = -0.00132133 Jy ! Component: 3300 - total flux cleaned = -0.00134075 Jy ! Component: 3350 - total flux cleaned = -0.00133118 Jy ! Component: 3400 - total flux cleaned = -0.00135971 Jy ! Component: 3450 - total flux cleaned = -0.00139765 Jy ! Component: 3500 - total flux cleaned = -0.00141655 Jy ! Component: 3550 - total flux cleaned = -0.00145395 Jy ! Component: 3600 - total flux cleaned = -0.00144457 Jy ! Component: 3650 - total flux cleaned = -0.00144464 Jy ! Component: 3700 - total flux cleaned = -0.00145386 Jy ! Component: 3750 - total flux cleaned = -0.00147219 Jy ! Component: 3800 - total flux cleaned = -0.00148132 Jy ! Component: 3850 - total flux cleaned = -0.00149953 Jy ! Component: 3900 - total flux cleaned = -0.0014995 Jy ! Component: 3950 - total flux cleaned = -0.0014815 Jy ! Component: 4000 - total flux cleaned = -0.00148149 Jy ! Component: 4050 - total flux cleaned = -0.00151711 Jy ! Total flux subtracted in 4096 components = -0.00152596 Jy ! Clean residual min=-0.000574 max=0.000622 Jy/beam ! Clean residual mean=0.000000 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.324108 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 550 components and 0.324108 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2216+3102_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9595 x 1.547 at 1.922 degrees (North through East) ! Clean map min=-0.001449 max=0.16646 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2216+3102_X_map.fits wmodel /vlbi/uf001/uva//J2216+3102_X_map.mod ! Writing 550 model components to file: /vlbi/uf001/uva//J2216+3102_X_map.mod wobs /vlbi/uf001/uva//J2216+3102_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2216+3102_X_uvs.fits wwins /vlbi/uf001/uva//J2216+3102_X_map.win ! wwins: Wrote 14 windows to /vlbi/uf001/uva//J2216+3102_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.166457 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148527 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.267685 0.267685 0.535371 1.07074 2.14148 4.28297 8.56594 17.1319 34.2637 68.5275 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.166 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1120.72 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2216+3102_X_dfm.log closed on Mon Jan 14 06:13:02 2019