! Started logfile: /vlbi/uf001/uva//J2215-2944_S_dfm.log on Mon Jan 14 06:12:38 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2215-2944_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2215-2944_S_uva.fits
! AN table 1: 74 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.986787 visibilities/baseline/integration-bin.
! Found source: J2215-2944
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 9858 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2215-2944_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.083938Jy  sigma=15.277640
! Fit after  self-cal, rms=0.629214Jy  sigma=8.638554
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.377 mas, bmaj=6.791 mas, bpa=-9.284 degrees
! Estimated noise=0.788989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.286641 Jy
! Component: 100  -  total flux cleaned = 0.371309 Jy
! Total flux subtracted in 100 components = 0.371309 Jy
! Clean residual min=-0.027049 max=0.053283 Jy/beam
! Clean residual mean=-0.000000 rms=0.006717 Jy/beam
! Combined flux in latest and established models = 0.371309 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.371309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.161290Jy  sigma=2.080044
! Fit after  self-cal, rms=0.161177Jy  sigma=2.078802
! Inverting map 
! Added new window around map position (-4, -14).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0539929 Jy
! Component: 100  -  total flux cleaned = 0.0864611 Jy
! Total flux subtracted in 100 components = 0.0864611 Jy
! Clean residual min=-0.019627 max=0.032568 Jy/beam
! Clean residual mean=0.000011 rms=0.004670 Jy/beam
! Combined flux in latest and established models = 0.45777 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.45777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.137180Jy  sigma=1.668089
! Fit after  self-cal, rms=0.136056Jy  sigma=1.652781
! Inverting map 
! Added new window around map position (-4, 7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03004 Jy
! Component: 100  -  total flux cleaned = 0.0491013 Jy
! Total flux subtracted in 100 components = 0.0491013 Jy
! Clean residual min=-0.015970 max=0.024612 Jy/beam
! Clean residual mean=0.000017 rms=0.003660 Jy/beam
! Combined flux in latest and established models = 0.506872 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 38 components and 0.506872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.126893Jy  sigma=1.507505
! Fit after  self-cal, rms=0.126211Jy  sigma=1.495488
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=7.955 mas, bpa=-8.044 degrees
! Estimated noise=0.531026 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021739 Jy
! Component: 100  -  total flux cleaned = 0.0343094 Jy
! Component: 150  -  total flux cleaned = 0.0425728 Jy
! Component: 200  -  total flux cleaned = 0.0472333 Jy
! Total flux subtracted in 200 components = 0.0472333 Jy
! Clean residual min=-0.014380 max=0.018240 Jy/beam
! Clean residual mean=0.000042 rms=0.003768 Jy/beam
! Combined flux in latest and established models = 0.554105 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 56 components and 0.554105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.121866Jy  sigma=1.430933
! Fit after  self-cal, rms=0.121596Jy  sigma=1.424327
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.949 x 7.955 at -8.044 degrees (North through East)
! Clean map  min=-0.013595  max=0.34208 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.95     HN        1.20     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.09     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.26     FD        0.95     HN        1.23     KP        1.02     
!   LA        0.92     MK        1.00     NL        1.07     OV        0.94     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.22     KP        1.02     
!   LA        0.96     MK        1.01     NL        1.04     OV        0.96     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.121596Jy  sigma=1.424327
! Fit after  self-cal, rms=0.132681Jy  sigma=1.338165
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.962 mas, bmaj=7.908 mas, bpa=-7.571 degrees
! Estimated noise=0.544969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00230592 Jy
! Component: 100  -  total flux cleaned = -0.00314316 Jy
! Component: 150  -  total flux cleaned = -0.00368517 Jy
! Component: 200  -  total flux cleaned = -0.00416227 Jy
! Total flux subtracted in 200 components = -0.00416227 Jy
! Clean residual min=-0.011143 max=0.011475 Jy/beam
! Clean residual mean=0.000076 rms=0.002842 Jy/beam
! Combined flux in latest and established models = 0.549943 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 70 components and 0.549943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131762Jy  sigma=1.331322
! Fit after  self-cal, rms=0.131866Jy  sigma=1.330623
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.131866Jy  sigma=1.330623
! Fit after  self-cal, rms=0.135179Jy  sigma=1.270168
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.957 mas, bmaj=7.907 mas, bpa=-7.712 degrees
! Estimated noise=0.553301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334101 Jy
! Component: 100  -  total flux cleaned = 0.00359937 Jy
! Component: 150  -  total flux cleaned = 0.00301591 Jy
! Component: 200  -  total flux cleaned = 0.00253513 Jy
! Total flux subtracted in 200 components = 0.00253513 Jy
! Clean residual min=-0.008066 max=0.007617 Jy/beam
! Clean residual mean=0.000051 rms=0.002115 Jy/beam
! Combined flux in latest and established models = 0.552478 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 95 components and 0.552478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134281Jy  sigma=1.265135
! Fit after  self-cal, rms=0.134356Jy  sigma=1.264628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117763 Jy
! Component: 100  -  total flux cleaned = -0.00148923 Jy
! Component: 150  -  total flux cleaned = -0.00177045 Jy
! Component: 200  -  total flux cleaned = -0.00194927 Jy
! Total flux subtracted in 200 components = -0.00194927 Jy
! Clean residual min=-0.007845 max=0.007545 Jy/beam
! Clean residual mean=0.000049 rms=0.002078 Jy/beam
! Combined flux in latest and established models = 0.550528 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 111 components and 0.550528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134138Jy  sigma=1.262965
! Fit after  self-cal, rms=0.134126Jy  sigma=1.262876
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.134126Jy  sigma=1.262876
! Fit after  self-cal, rms=0.122456Jy  sigma=1.185418
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.964 mas, bmaj=7.906 mas, bpa=-7.769 degrees
! Estimated noise=0.553614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00251283 Jy
! Component: 100  -  total flux cleaned = -0.00275989 Jy
! Component: 150  -  total flux cleaned = -0.00318081 Jy
! Component: 200  -  total flux cleaned = -0.0034612 Jy
! Total flux subtracted in 200 components = -0.0034612 Jy
! Clean residual min=-0.004893 max=0.003868 Jy/beam
! Clean residual mean=0.000020 rms=0.001093 Jy/beam
! Combined flux in latest and established models = 0.547067 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 120 components and 0.547067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122154Jy  sigma=1.182038
! Fit after  self-cal, rms=0.122155Jy  sigma=1.181516
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000507537 Jy
! Component: 100  -  total flux cleaned = -0.000671473 Jy
! Component: 150  -  total flux cleaned = -0.000822433 Jy
! Component: 200  -  total flux cleaned = -0.000963675 Jy
! Total flux subtracted in 200 components = -0.000963675 Jy
! Clean residual min=-0.004655 max=0.003558 Jy/beam
! Clean residual mean=0.000019 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.546103 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 128 components and 0.546103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122038Jy  sigma=1.179973
! Fit after  self-cal, rms=0.122018Jy  sigma=1.179833
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122018Jy  sigma=1.179833
! Fit after  self-cal, rms=0.123405Jy  sigma=1.179046
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.665 mas, bmaj=19.49 mas, bpa=-2.776 degrees
! Estimated noise=0.730489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00274721 Jy
! Component: 100  -  total flux cleaned = -0.00291869 Jy
! Component: 150  -  total flux cleaned = -0.00301825 Jy
! Component: 200  -  total flux cleaned = -0.00306214 Jy
! Total flux subtracted in 200 components = -0.00306214 Jy
! Clean residual min=-0.004113 max=0.003330 Jy/beam
! Clean residual mean=0.000033 rms=0.001182 Jy/beam
! Combined flux in latest and established models = 0.543041 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 132 components and 0.543041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123301Jy  sigma=1.178284
! Fit after  self-cal, rms=0.123299Jy  sigma=1.178066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000542161 Jy
! Component: 100  -  total flux cleaned = -0.000646097 Jy
! Component: 150  -  total flux cleaned = -0.000739823 Jy
! Component: 200  -  total flux cleaned = -0.000780702 Jy
! Total flux subtracted in 200 components = -0.000780702 Jy
! Clean residual min=-0.003960 max=0.003339 Jy/beam
! Clean residual mean=0.000031 rms=0.001163 Jy/beam
! Combined flux in latest and established models = 0.54226 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 135 components and 0.542261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123248Jy  sigma=1.177595
! Fit after  self-cal, rms=0.123233Jy  sigma=1.177401
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.905 mas, bpa=-7.726 degrees
! Estimated noise=0.553699 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.966 x 7.905 at -7.726 degrees (North through East)
! Clean map  min=-0.0041049  max=0.36209 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.38 mas, bmaj=6.721 mas, bpa=-8.899 degrees
! Estimated noise=0.824047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.298957 Jy
! Component: 100  -  total flux cleaned = 0.390208 Jy
! Component: 150  -  total flux cleaned = 0.439597 Jy
! Component: 200  -  total flux cleaned = 0.469488 Jy
! Total flux subtracted in 200 components = 0.469488 Jy
! Clean residual min=-0.008692 max=0.016978 Jy/beam
! Clean residual mean=0.000000 rms=0.002445 Jy/beam
! Combined flux in latest and established models = 0.469488 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.469488 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.905 mas, bpa=-7.726 degrees
! Estimated noise=0.553699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272445 Jy
! Component: 100  -  total flux cleaned = 0.0432647 Jy
! Component: 150  -  total flux cleaned = 0.0533051 Jy
! Component: 200  -  total flux cleaned = 0.059743 Jy
! Total flux subtracted in 200 components = 0.059743 Jy
! Clean residual min=-0.004414 max=0.004832 Jy/beam
! Clean residual mean=0.000003 rms=0.001101 Jy/beam
! Combined flux in latest and established models = 0.529231 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 71 components and 0.529231 Jy
! Inverting map 
! Added new window around map position (2.5, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00487366 Jy
! Component: 100  -  total flux cleaned = 0.00696353 Jy
! Component: 150  -  total flux cleaned = 0.00831156 Jy
! Component: 200  -  total flux cleaned = 0.00925227 Jy
! Total flux subtracted in 200 components = 0.00925227 Jy
! Clean residual min=-0.004010 max=0.003322 Jy/beam
! Clean residual mean=0.000011 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.538484 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 96 components and 0.538484 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.665 mas, bmaj=19.49 mas, bpa=-2.776 degrees
! Estimated noise=0.730489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250426 Jy
! Component: 100  -  total flux cleaned = 0.00310886 Jy
! Component: 150  -  total flux cleaned = 0.00315108 Jy
! Component: 200  -  total flux cleaned = 0.00318835 Jy
! Total flux subtracted in 200 components = 0.00318835 Jy
! Clean residual min=-0.004160 max=0.003727 Jy/beam
! Clean residual mean=0.000029 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.541672 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.94655e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133495 Jy
! Component: 150  -  total flux cleaned = 0.000164315 Jy
! Component: 200  -  total flux cleaned = 0.000224033 Jy
! Total flux subtracted in 200 components = 0.000224033 Jy
! Clean residual min=-0.004132 max=0.003706 Jy/beam
! Clean residual mean=0.000030 rms=0.001164 Jy/beam
! Combined flux in latest and established models = 0.541896 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 114 components and 0.541896 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.966 mas, bmaj=7.905 mas, bpa=-7.726 degrees
! Estimated noise=0.553699 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000786789 Jy
! Component: 100  -  total flux cleaned = -0.000861703 Jy
! Component: 150  -  total flux cleaned = -0.000732947 Jy
! Component: 200  -  total flux cleaned = -0.000734756 Jy
! Total flux subtracted in 200 components = -0.000734756 Jy
! Clean residual min=-0.003640 max=0.003190 Jy/beam
! Clean residual mean=0.000014 rms=0.000890 Jy/beam
! Combined flux in latest and established models = 0.541161 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.541161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123082Jy  sigma=1.173829
! Fit after  self-cal, rms=0.123009Jy  sigma=1.172999
wmodel J2215-2944_S_map.mod
! Writing 125 model components to file: J2215-2944_S_map.mod
wobs   J2215-2944_S_uvs.fits
! Writing UV FITS file: J2215-2944_S_uvs.fits
wwins  J2215-2944_S_map.win
! wwins: Wrote 4 windows to J2215-2944_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00166436 Jy
! Component: 100  -  total flux cleaned = -0.00261615 Jy
! Component: 150  -  total flux cleaned = -0.0030024 Jy
! Component: 200  -  total flux cleaned = -0.00326497 Jy
! Component: 250  -  total flux cleaned = -0.00331785 Jy
! Component: 300  -  total flux cleaned = -0.00327104 Jy
! Component: 350  -  total flux cleaned = -0.00336692 Jy
! Component: 400  -  total flux cleaned = -0.00332139 Jy
! Component: 450  -  total flux cleaned = -0.00332157 Jy
! Component: 500  -  total flux cleaned = -0.00332206 Jy
! Component: 550  -  total flux cleaned = -0.00336452 Jy
! Component: 600  -  total flux cleaned = -0.0033223 Jy
! Component: 650  -  total flux cleaned = -0.00348628 Jy
! Component: 700  -  total flux cleaned = -0.00348595 Jy
! Component: 750  -  total flux cleaned = -0.00352522 Jy
! Component: 800  -  total flux cleaned = -0.0036412 Jy
! Component: 850  -  total flux cleaned = -0.00367904 Jy
! Component: 900  -  total flux cleaned = -0.00382884 Jy
! Component: 950  -  total flux cleaned = -0.00401273 Jy
! Component: 1000  -  total flux cleaned = -0.00422888 Jy
! Component: 1050  -  total flux cleaned = -0.00440584 Jy
! Component: 1100  -  total flux cleaned = -0.00458017 Jy
! Component: 1150  -  total flux cleaned = -0.00478671 Jy
! Component: 1200  -  total flux cleaned = -0.00488827 Jy
! Component: 1250  -  total flux cleaned = -0.00512263 Jy
! Component: 1300  -  total flux cleaned = -0.00528769 Jy
! Component: 1350  -  total flux cleaned = -0.00532118 Jy
! Component: 1400  -  total flux cleaned = -0.00548226 Jy
! Component: 1450  -  total flux cleaned = -0.00554593 Jy
! Component: 1500  -  total flux cleaned = -0.00560866 Jy
! Component: 1550  -  total flux cleaned = -0.00563974 Jy
! Component: 1600  -  total flux cleaned = -0.0056392 Jy
! Component: 1650  -  total flux cleaned = -0.00563901 Jy
! Component: 1700  -  total flux cleaned = -0.00569845 Jy
! Component: 1750  -  total flux cleaned = -0.00566858 Jy
! Component: 1800  -  total flux cleaned = -0.00563925 Jy
! Component: 1850  -  total flux cleaned = -0.00561057 Jy
! Component: 1900  -  total flux cleaned = -0.00569662 Jy
! Component: 1950  -  total flux cleaned = -0.00566809 Jy
! Component: 2000  -  total flux cleaned = -0.00564012 Jy
! Component: 2050  -  total flux cleaned = -0.00566799 Jy
! Component: 2100  -  total flux cleaned = -0.00572256 Jy
! Component: 2150  -  total flux cleaned = -0.0056946 Jy
! Component: 2200  -  total flux cleaned = -0.00564094 Jy
! Component: 2250  -  total flux cleaned = -0.00556111 Jy
! Component: 2300  -  total flux cleaned = -0.00561424 Jy
! Component: 2350  -  total flux cleaned = -0.00569286 Jy
! Component: 2400  -  total flux cleaned = -0.00571849 Jy
! Component: 2450  -  total flux cleaned = -0.00579533 Jy
! Component: 2500  -  total flux cleaned = -0.00574412 Jy
! Component: 2550  -  total flux cleaned = -0.00576932 Jy
! Component: 2600  -  total flux cleaned = -0.00581937 Jy
! Component: 2650  -  total flux cleaned = -0.00586844 Jy
! Component: 2700  -  total flux cleaned = -0.0060397 Jy
! Component: 2750  -  total flux cleaned = -0.005991 Jy
! Component: 2800  -  total flux cleaned = -0.00603906 Jy
! Component: 2850  -  total flux cleaned = -0.00613458 Jy
! Component: 2900  -  total flux cleaned = -0.0061345 Jy
! Component: 2950  -  total flux cleaned = -0.00618102 Jy
! Component: 3000  -  total flux cleaned = -0.00627388 Jy
! Component: 3050  -  total flux cleaned = -0.00634309 Jy
! Component: 3100  -  total flux cleaned = -0.00627464 Jy
! Component: 3150  -  total flux cleaned = -0.00629759 Jy
! Component: 3200  -  total flux cleaned = -0.00636508 Jy
! Component: 3250  -  total flux cleaned = -0.0064545 Jy
! Component: 3300  -  total flux cleaned = -0.00647657 Jy
! Component: 3350  -  total flux cleaned = -0.00645458 Jy
! Component: 3400  -  total flux cleaned = -0.0064764 Jy
! Component: 3450  -  total flux cleaned = -0.00649803 Jy
! Component: 3500  -  total flux cleaned = -0.00645489 Jy
! Component: 3550  -  total flux cleaned = -0.00651878 Jy
! Component: 3600  -  total flux cleaned = -0.00643434 Jy
! Component: 3650  -  total flux cleaned = -0.00649722 Jy
! Component: 3700  -  total flux cleaned = -0.00645558 Jy
! Component: 3750  -  total flux cleaned = -0.00651754 Jy
! Component: 3800  -  total flux cleaned = -0.00647671 Jy
! Component: 3850  -  total flux cleaned = -0.0064563 Jy
! Component: 3900  -  total flux cleaned = -0.00651679 Jy
! Component: 3950  -  total flux cleaned = -0.00641632 Jy
! Component: 4000  -  total flux cleaned = -0.00639664 Jy
! Component: 4050  -  total flux cleaned = -0.00643624 Jy
! Total flux subtracted in 4096 components = -0.00631796 Jy
! Clean residual min=-0.001159 max=0.001062 Jy/beam
! Clean residual mean=0.000009 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.534843 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 424 components and 0.534844 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2215-2944_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.966 x 7.905 at -7.726 degrees (North through East)
! Clean map  min=-0.0030755  max=0.3701 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2215-2944_S_map.fits
wmodel /vlbi/uf001/uva//J2215-2944_S_map.mod
! Writing 424 model components to file: /vlbi/uf001/uva//J2215-2944_S_map.mod
wobs   /vlbi/uf001/uva//J2215-2944_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2215-2944_S_uvs.fits
wwins  /vlbi/uf001/uva//J2215-2944_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2215-2944_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.370098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000368922 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.299047 0.299047 0.598095 1.19619 2.39238 4.78476 9.56952 19.139 38.2781 76.5561
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.37 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1003.18 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2215-2944_S_dfm.log closed on Mon Jan 14 06:12:43 2019