! Started logfile: /vlbi/uf001/uva//J2212+0819_X_dfm.log on Mon Jan 14 06:11:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/uf001/uva//J2212+0819_X_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2212+0819_X_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975439 visibilities/baseline/integration-bin. ! Found source: J2212+0819 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 30024 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2212+0819_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021098Jy sigma=24.939340 ! Fit after self-cal, rms=0.863497Jy sigma=21.257978 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.697 mas, bmaj=1.674 mas, bpa=-1.931 degrees ! Estimated noise=0.286596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112652 Jy ! Component: 100 - total flux cleaned = 0.138612 Jy ! Total flux subtracted in 100 components = 0.138612 Jy ! Clean residual min=-0.018518 max=0.081544 Jy/beam ! Clean residual mean=0.000006 rms=0.004886 Jy/beam ! Combined flux in latest and established models = 0.138612 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.138612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.153877Jy sigma=3.725304 ! Fit after self-cal, rms=0.152841Jy sigma=3.691965 ! Inverting map ! Added new window around map position (3, 12.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0728919 Jy ! Component: 100 - total flux cleaned = 0.0947608 Jy ! Total flux subtracted in 100 components = 0.0947608 Jy ! Clean residual min=-0.011913 max=0.040272 Jy/beam ! Clean residual mean=0.000003 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.233373 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 13 components and 0.233373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117225Jy sigma=2.873857 ! Fit after self-cal, rms=0.086101Jy sigma=2.024600 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431822 Jy ! Component: 100 - total flux cleaned = 0.0604099 Jy ! Total flux subtracted in 100 components = 0.0604099 Jy ! Clean residual min=-0.006245 max=0.009025 Jy/beam ! Clean residual mean=0.000002 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.293783 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 18 components and 0.293783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063933Jy sigma=1.476499 ! Fit after self-cal, rms=0.062809Jy sigma=1.447795 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120717 Jy ! Component: 100 - total flux cleaned = 0.0202042 Jy ! Total flux subtracted in 100 components = 0.0202042 Jy ! Clean residual min=-0.004857 max=0.008636 Jy/beam ! Clean residual mean=0.000001 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.313987 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.313987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060352Jy sigma=1.387029 ! Fit after self-cal, rms=0.060334Jy sigma=1.386443 ! Inverting map ! Added new window around map position (1.8, 9.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792945 Jy ! Component: 100 - total flux cleaned = 0.012287 Jy ! Total flux subtracted in 100 components = 0.012287 Jy ! Clean residual min=-0.004320 max=0.006553 Jy/beam ! Clean residual mean=0.000001 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.326274 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.326274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059352Jy sigma=1.359775 ! Fit after self-cal, rms=0.059328Jy sigma=1.359031 ! Inverting map ! Added new window around map position (4.2, 15). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00562173 Jy ! Component: 100 - total flux cleaned = 0.00837519 Jy ! Total flux subtracted in 100 components = 0.00837519 Jy ! Clean residual min=-0.003997 max=0.005050 Jy/beam ! Clean residual mean=0.000001 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.334649 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 36 components and 0.334649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058834Jy sigma=1.346431 ! Fit after self-cal, rms=0.058818Jy sigma=1.345870 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8656 mas, bmaj=1.981 mas, bpa=-2.289 degrees ! Estimated noise=0.17593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542276 Jy ! Component: 100 - total flux cleaned = 0.00895768 Jy ! Component: 150 - total flux cleaned = 0.0117672 Jy ! Component: 200 - total flux cleaned = 0.0136596 Jy ! Total flux subtracted in 200 components = 0.0136596 Jy ! Clean residual min=-0.003712 max=0.004191 Jy/beam ! Clean residual mean=0.000001 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.348309 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.348309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058208Jy sigma=1.328612 ! Fit after self-cal, rms=0.058172Jy sigma=1.327731 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8656 x 1.981 at -2.289 degrees (North through East) ! Clean map min=-0.0034769 max=0.15503 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.95 KP 1.02 ! LA 1.00 MK 1.01 NL 1.08 OV 0.92 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.95 KP 1.03 ! LA 1.00 MK 1.04 NL 1.08 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.95 KP 1.03 ! LA 1.00 MK 1.02 NL 1.09 OV 0.92 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.95 KP 1.01 ! LA 1.01 MK 1.01 NL 1.10 OV 0.91 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 0.94 KP 1.04 ! LA 1.02 MK 1.02 NL 1.09 OV 0.91 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.94 KP 1.03 ! LA 1.00 MK 1.03 NL 1.09 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.96 KP 1.02 ! LA 0.98 MK 1.04 NL 1.10 OV 0.91 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.96 KP 1.01 ! LA 1.00 MK 1.02 NL 1.11 OV 0.93 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.94 KP 1.03 ! LA 1.00 MK 1.03 NL 1.11 OV 0.93 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.93 KP 1.05 ! LA 1.02 MK 1.03 NL 1.10 OV 0.90 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 0.96 KP 1.03 ! LA 0.99 MK 1.00 NL 1.10 OV 0.92 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 1.00 ! LA 1.01 MK 1.05 NL 1.10 OV 0.91 ! PT 0.93 SC 0.99 ! ! ! Fit before self-cal, rms=0.058172Jy sigma=1.327731 ! Fit after self-cal, rms=0.055971Jy sigma=1.277518 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8662 mas, bmaj=1.992 mas, bpa=-1.953 degrees ! Estimated noise=0.175742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00247742 Jy ! Component: 100 - total flux cleaned = -0.00352235 Jy ! Component: 150 - total flux cleaned = -0.00405235 Jy ! Component: 200 - total flux cleaned = -0.0043415 Jy ! Total flux subtracted in 200 components = -0.0043415 Jy ! Clean residual min=-0.001670 max=0.001947 Jy/beam ! Clean residual mean=0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.343967 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.343967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055766Jy sigma=1.272623 ! Fit after self-cal, rms=0.055771Jy sigma=1.272360 ! Inverting map ! Added new window around map position (3.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139825 Jy ! Component: 100 - total flux cleaned = 0.00155614 Jy ! Component: 150 - total flux cleaned = 0.00155512 Jy ! Component: 200 - total flux cleaned = 0.00155562 Jy ! Total flux subtracted in 200 components = 0.00155562 Jy ! Clean residual min=-0.001609 max=0.001681 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.345523 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 90 components and 0.345523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055672Jy sigma=1.270142 ! Fit after self-cal, rms=0.055669Jy sigma=1.270073 ! Inverting map ! Added new window around map position (-4.4, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011194 Jy ! Component: 100 - total flux cleaned = 0.00163467 Jy ! Component: 150 - total flux cleaned = 0.00188376 Jy ! Component: 200 - total flux cleaned = 0.00204046 Jy ! Total flux subtracted in 200 components = 0.00204046 Jy ! Clean residual min=-0.001461 max=0.001421 Jy/beam ! Clean residual mean=0.000001 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.347563 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.347563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055589Jy sigma=1.268146 ! Fit after self-cal, rms=0.055586Jy sigma=1.268084 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055586Jy sigma=1.268084 ! Fit after self-cal, rms=0.055454Jy sigma=1.263778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=1.992 mas, bpa=-1.906 degrees ! Estimated noise=0.17555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102111 Jy ! Component: 100 - total flux cleaned = -0.00090257 Jy ! Component: 150 - total flux cleaned = -0.000795216 Jy ! Component: 200 - total flux cleaned = -0.000763246 Jy ! Total flux subtracted in 200 components = -0.000763246 Jy ! Clean residual min=-0.001238 max=0.001125 Jy/beam ! Clean residual mean=0.000000 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.3468 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.3468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055400Jy sigma=1.262556 ! Fit after self-cal, rms=0.055402Jy sigma=1.262521 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.85752e-05 Jy ! Component: 100 - total flux cleaned = 0.000128649 Jy ! Component: 150 - total flux cleaned = 0.000100204 Jy ! Component: 200 - total flux cleaned = 7.34293e-05 Jy ! Total flux subtracted in 200 components = 7.34293e-05 Jy ! Clean residual min=-0.001193 max=0.001108 Jy/beam ! Clean residual mean=0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.346873 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.346873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055373Jy sigma=1.261909 ! Fit after self-cal, rms=0.055373Jy sigma=1.261902 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055373Jy sigma=1.261902 ! Fit after self-cal, rms=0.055293Jy sigma=1.261436 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8646 mas, bmaj=1.991 mas, bpa=-1.875 degrees ! Estimated noise=0.175367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000597526 Jy ! Component: 100 - total flux cleaned = -0.000685997 Jy ! Component: 150 - total flux cleaned = -0.000711728 Jy ! Component: 200 - total flux cleaned = -0.000686961 Jy ! Total flux subtracted in 200 components = -0.000686961 Jy ! Clean residual min=-0.001182 max=0.001119 Jy/beam ! Clean residual mean=0.000000 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.346186 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 133 components and 0.346187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055266Jy sigma=1.260842 ! Fit after self-cal, rms=0.055265Jy sigma=1.260834 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.28598e-05 Jy ! Component: 100 - total flux cleaned = 2.2252e-07 Jy ! Component: 150 - total flux cleaned = 8.96569e-07 Jy ! Component: 200 - total flux cleaned = 2.21888e-05 Jy ! Total flux subtracted in 200 components = 2.21888e-05 Jy ! Clean residual min=-0.001149 max=0.001108 Jy/beam ! Clean residual mean=0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.346209 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 142 components and 0.346209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055248Jy sigma=1.260487 ! Fit after self-cal, rms=0.055248Jy sigma=1.260483 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055248Jy sigma=1.260483 ! Fit after self-cal, rms=0.055180Jy sigma=1.260399 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=3.076 mas, bpa=-0.3056 degrees ! Estimated noise=0.225508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206155 Jy ! Component: 100 - total flux cleaned = 0.000137522 Jy ! Component: 150 - total flux cleaned = 0.000122619 Jy ! Component: 200 - total flux cleaned = 0.00010935 Jy ! Total flux subtracted in 200 components = 0.00010935 Jy ! Clean residual min=-0.001080 max=0.001206 Jy/beam ! Clean residual mean=0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.346318 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 164 components and 0.346318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055173Jy sigma=1.260258 ! Fit after self-cal, rms=0.055171Jy sigma=1.260247 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146947 Jy ! Component: 100 - total flux cleaned = 0.000184142 Jy ! Component: 150 - total flux cleaned = 0.000219287 Jy ! Component: 200 - total flux cleaned = 0.000218915 Jy ! Total flux subtracted in 200 components = 0.000218915 Jy ! Clean residual min=-0.001069 max=0.001221 Jy/beam ! Clean residual mean=0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.346537 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 176 components and 0.346537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055168Jy sigma=1.260188 ! Fit after self-cal, rms=0.055168Jy sigma=1.260186 ! Inverting map ! Added new window around map position (10.4, -16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110097 Jy ! Component: 100 - total flux cleaned = 0.0015678 Jy ! Component: 150 - total flux cleaned = 0.00176646 Jy ! Component: 200 - total flux cleaned = 0.00194294 Jy ! Total flux subtracted in 200 components = 0.00194294 Jy ! Clean residual min=-0.000959 max=0.000909 Jy/beam ! Clean residual mean=0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.34848 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 208 components and 0.34848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055155Jy sigma=1.259805 ! Fit after self-cal, rms=0.055153Jy sigma=1.259780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=1.991 mas, bpa=-1.849 degrees ! Estimated noise=0.175231 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8638 x 1.991 at -1.849 degrees (North through East) ! Clean map min=-0.0012944 max=0.15468 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6959 mas, bmaj=1.683 mas, bpa=-1.429 degrees ! Estimated noise=0.284481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145312 Jy ! Component: 100 - total flux cleaned = 0.217862 Jy ! Component: 150 - total flux cleaned = 0.256341 Jy ! Component: 200 - total flux cleaned = 0.278721 Jy ! Total flux subtracted in 200 components = 0.278721 Jy ! Clean residual min=-0.004733 max=0.011946 Jy/beam ! Clean residual mean=0.000002 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.278721 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.278721 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=1.991 mas, bpa=-1.849 degrees ! Estimated noise=0.175231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179263 Jy ! Component: 100 - total flux cleaned = 0.0286488 Jy ! Component: 150 - total flux cleaned = 0.0358267 Jy ! Component: 200 - total flux cleaned = 0.0411638 Jy ! Total flux subtracted in 200 components = 0.0411638 Jy ! Clean residual min=-0.001999 max=0.003101 Jy/beam ! Clean residual mean=0.000002 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.319885 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 32 components and 0.319884 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413388 Jy ! Component: 100 - total flux cleaned = 0.00741471 Jy ! Component: 150 - total flux cleaned = 0.0100747 Jy ! Component: 200 - total flux cleaned = 0.012302 Jy ! Total flux subtracted in 200 components = 0.012302 Jy ! Clean residual min=-0.001448 max=0.001864 Jy/beam ! Clean residual mean=0.000001 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.332186 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.332186 Jy ! Inverting map ! Added new window around map position (0.4, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196217 Jy ! Component: 100 - total flux cleaned = 0.00326811 Jy ! Component: 150 - total flux cleaned = 0.00426265 Jy ! Component: 200 - total flux cleaned = 0.00517058 Jy ! Total flux subtracted in 200 components = 0.00517058 Jy ! Clean residual min=-0.001323 max=0.001255 Jy/beam ! Clean residual mean=0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.337357 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 69 components and 0.337357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=3.076 mas, bpa=-0.3056 degrees ! Estimated noise=0.225508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180866 Jy ! Component: 100 - total flux cleaned = 0.00313041 Jy ! Component: 150 - total flux cleaned = 0.00421963 Jy ! Component: 200 - total flux cleaned = 0.00514597 Jy ! Total flux subtracted in 200 components = 0.00514597 Jy ! Clean residual min=-0.001073 max=0.001068 Jy/beam ! Clean residual mean=0.000001 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.342503 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735132 Jy ! Component: 100 - total flux cleaned = 0.00130318 Jy ! Component: 150 - total flux cleaned = 0.0017444 Jy ! Component: 200 - total flux cleaned = 0.00210569 Jy ! Total flux subtracted in 200 components = 0.00210569 Jy ! Clean residual min=-0.000973 max=0.000984 Jy/beam ! Clean residual mean=0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.344609 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 149 components and 0.344609 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8638 mas, bmaj=1.991 mas, bpa=-1.849 degrees ! Estimated noise=0.175231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225813 Jy ! Component: 100 - total flux cleaned = -0.000180435 Jy ! Component: 150 - total flux cleaned = -0.000104353 Jy ! Component: 200 - total flux cleaned = 0.00010629 Jy ! Total flux subtracted in 200 components = 0.00010629 Jy ! Clean residual min=-0.001148 max=0.000992 Jy/beam ! Clean residual mean=0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.344715 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 160 components and 0.344715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055179Jy sigma=1.260466 ! Fit after self-cal, rms=0.055172Jy sigma=1.260274 wmodel J2212+0819_X_map.mod ! Writing 160 model components to file: J2212+0819_X_map.mod wobs J2212+0819_X_uvs.fits ! Writing UV FITS file: J2212+0819_X_uvs.fits wwins J2212+0819_X_map.win ! wwins: Wrote 9 windows to J2212+0819_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301168 Jy ! Component: 100 - total flux cleaned = -0.000336302 Jy ! Component: 150 - total flux cleaned = -0.000254402 Jy ! Component: 200 - total flux cleaned = -0.000190385 Jy ! Component: 250 - total flux cleaned = -0.000113082 Jy ! Component: 300 - total flux cleaned = -9.80382e-05 Jy ! Component: 350 - total flux cleaned = -5.39149e-05 Jy ! Component: 400 - total flux cleaned = -1.07402e-05 Jy ! Component: 450 - total flux cleaned = 6.04695e-05 Jy ! Component: 500 - total flux cleaned = 0.000158003 Jy ! Component: 550 - total flux cleaned = 0.000212705 Jy ! Component: 600 - total flux cleaned = 0.000252841 Jy ! Component: 650 - total flux cleaned = 0.000279275 Jy ! Component: 700 - total flux cleaned = 0.00025297 Jy ! Component: 750 - total flux cleaned = 0.000227082 Jy ! Component: 800 - total flux cleaned = 0.000201677 Jy ! Component: 850 - total flux cleaned = 0.000151679 Jy ! Component: 900 - total flux cleaned = 0.000139318 Jy ! Component: 950 - total flux cleaned = 0.00015167 Jy ! Component: 1000 - total flux cleaned = 0.000163948 Jy ! Component: 1050 - total flux cleaned = 0.000163681 Jy ! Component: 1100 - total flux cleaned = 0.000151979 Jy ! Component: 1150 - total flux cleaned = 0.000210627 Jy ! Component: 1200 - total flux cleaned = 0.00025714 Jy ! Component: 1250 - total flux cleaned = 0.00028011 Jy ! Component: 1300 - total flux cleaned = 0.000359818 Jy ! Component: 1350 - total flux cleaned = 0.000325713 Jy ! Component: 1400 - total flux cleaned = 0.000325668 Jy ! Component: 1450 - total flux cleaned = 0.000347845 Jy ! Component: 1500 - total flux cleaned = 0.000358822 Jy ! Component: 1550 - total flux cleaned = 0.000369698 Jy ! Component: 1600 - total flux cleaned = 0.000380439 Jy ! Component: 1650 - total flux cleaned = 0.000434083 Jy ! Component: 1700 - total flux cleaned = 0.000412815 Jy ! Component: 1750 - total flux cleaned = 0.000497046 Jy ! Component: 1800 - total flux cleaned = 0.000476164 Jy ! Component: 1850 - total flux cleaned = 0.000517511 Jy ! Component: 1900 - total flux cleaned = 0.000568995 Jy ! Component: 1950 - total flux cleaned = 0.000579154 Jy ! Component: 2000 - total flux cleaned = 0.000609536 Jy ! Component: 2050 - total flux cleaned = 0.000649735 Jy ! Component: 2100 - total flux cleaned = 0.000659888 Jy ! Component: 2150 - total flux cleaned = 0.000729211 Jy ! Component: 2200 - total flux cleaned = 0.00074879 Jy ! Component: 2250 - total flux cleaned = 0.000817162 Jy ! Component: 2300 - total flux cleaned = 0.000865557 Jy ! Component: 2350 - total flux cleaned = 0.000875115 Jy ! Component: 2400 - total flux cleaned = 0.000922872 Jy ! Component: 2450 - total flux cleaned = 0.000960795 Jy ! Component: 2500 - total flux cleaned = 0.00100789 Jy ! Component: 2550 - total flux cleaned = 0.00100782 Jy ! Component: 2600 - total flux cleaned = 0.00105431 Jy ! Component: 2650 - total flux cleaned = 0.00108209 Jy ! Component: 2700 - total flux cleaned = 0.00113727 Jy ! Component: 2750 - total flux cleaned = 0.00121941 Jy ! Component: 2800 - total flux cleaned = 0.0012285 Jy ! Component: 2850 - total flux cleaned = 0.00127367 Jy ! Component: 2900 - total flux cleaned = 0.00130955 Jy ! Component: 2950 - total flux cleaned = 0.00132742 Jy ! Component: 3000 - total flux cleaned = 0.00141609 Jy ! Component: 3050 - total flux cleaned = 0.00147777 Jy ! Component: 3100 - total flux cleaned = 0.0014778 Jy ! Component: 3150 - total flux cleaned = 0.00152143 Jy ! Component: 3200 - total flux cleaned = 0.00159091 Jy ! Component: 3250 - total flux cleaned = 0.00163402 Jy ! Component: 3300 - total flux cleaned = 0.00169402 Jy ! Component: 3350 - total flux cleaned = 0.0017708 Jy ! Component: 3400 - total flux cleaned = 0.00183032 Jy ! Component: 3450 - total flux cleaned = 0.00191478 Jy ! Component: 3500 - total flux cleaned = 0.00197358 Jy ! Component: 3550 - total flux cleaned = 0.00204868 Jy ! Component: 3600 - total flux cleaned = 0.00208193 Jy ! Component: 3650 - total flux cleaned = 0.00210674 Jy ! Component: 3700 - total flux cleaned = 0.00216439 Jy ! Component: 3750 - total flux cleaned = 0.00225447 Jy ! Component: 3800 - total flux cleaned = 0.0022545 Jy ! Component: 3850 - total flux cleaned = 0.0023518 Jy ! Component: 3900 - total flux cleaned = 0.0024002 Jy ! Component: 3950 - total flux cleaned = 0.0024324 Jy ! Component: 4000 - total flux cleaned = 0.0024964 Jy ! Component: 4050 - total flux cleaned = 0.00254415 Jy ! Total flux subtracted in 4096 components = 0.00260751 Jy ! Clean residual min=-0.000409 max=0.000467 Jy/beam ! Clean residual mean=0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.347322 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 476 components and 0.347323 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2212+0819_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8638 x 1.991 at -1.849 degrees (North through East) ! Clean map min=-0.00087168 max=0.15407 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2212+0819_X_map.fits wmodel /vlbi/uf001/uva//J2212+0819_X_map.mod ! Writing 476 model components to file: /vlbi/uf001/uva//J2212+0819_X_map.mod wobs /vlbi/uf001/uva//J2212+0819_X_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2212+0819_X_uvs.fits wwins /vlbi/uf001/uva//J2212+0819_X_map.win ! wwins: Wrote 10 windows to /vlbi/uf001/uva//J2212+0819_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.154065 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013683 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266439 0.266439 0.532878 1.06576 2.13151 4.26303 8.52605 17.0521 34.1042 68.2084 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.154 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1125.96 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2212+0819_X_dfm.log closed on Mon Jan 14 06:11:29 2019