! Started logfile: /vlbi/uf001/uva//J2212+0646_S_dfm.log on Mon Jan 14 06:11:05 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2212+0646_S_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2212+0646_S_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.969981 visibilities/baseline/integration-bin.
! Found source: J2212+0646
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 7464 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2212+0646_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011586Jy  sigma=23.542834
! Fit after  self-cal, rms=0.829266Jy  sigma=19.236568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.785 mas, bmaj=7.037 mas, bpa=-4.701 degrees
! Estimated noise=0.515058 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.133161 Jy
! Component: 100  -  total flux cleaned = 0.162405 Jy
! Total flux subtracted in 100 components = 0.162405 Jy
! Clean residual min=-0.005200 max=0.009303 Jy/beam
! Clean residual mean=-0.000015 rms=0.001292 Jy/beam
! Combined flux in latest and established models = 0.162405 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.162405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.065216Jy  sigma=1.398920
! Fit after  self-cal, rms=0.065205Jy  sigma=1.398764
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00977682 Jy
! Component: 100  -  total flux cleaned = 0.0147693 Jy
! Total flux subtracted in 100 components = 0.0147693 Jy
! Clean residual min=-0.004079 max=0.008647 Jy/beam
! Clean residual mean=-0.000007 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.177174 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.177174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063591Jy  sigma=1.355995
! Fit after  self-cal, rms=0.063557Jy  sigma=1.355202
! Inverting map 
! Added new window around map position (-3, 24.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798877 Jy
! Component: 100  -  total flux cleaned = 0.0123158 Jy
! Total flux subtracted in 100 components = 0.0123158 Jy
! Clean residual min=-0.003739 max=0.003857 Jy/beam
! Clean residual mean=-0.000002 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.18949 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.18949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.062430Jy  sigma=1.325783
! Fit after  self-cal, rms=0.062385Jy  sigma=1.324705
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.306 mas, bmaj=7.75 mas, bpa=-3.467 degrees
! Estimated noise=0.363489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00469905 Jy
! Component: 100  -  total flux cleaned = 0.00775302 Jy
! Component: 150  -  total flux cleaned = 0.00999592 Jy
! Component: 200  -  total flux cleaned = 0.0117461 Jy
! Total flux subtracted in 200 components = 0.0117461 Jy
! Clean residual min=-0.002867 max=0.002926 Jy/beam
! Clean residual mean=-0.000005 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.201236 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 60 components and 0.201236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061966Jy  sigma=1.313620
! Fit after  self-cal, rms=0.061954Jy  sigma=1.313301
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.306 x 7.75 at -3.467 degrees (North through East)
! Clean map  min=-0.0027726  max=0.17318 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.98     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.04     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        0.97     KP        1.01     
!   LA        1.01     MK        1.00     NL        0.95     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.061954Jy  sigma=1.313301
! Fit after  self-cal, rms=0.061313Jy  sigma=1.305676
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.325 mas, bmaj=7.772 mas, bpa=-3.4 degrees
! Estimated noise=0.361168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163911 Jy
! Component: 100  -  total flux cleaned = 0.00223124 Jy
! Component: 150  -  total flux cleaned = 0.00247968 Jy
! Component: 200  -  total flux cleaned = 0.00275108 Jy
! Total flux subtracted in 200 components = 0.00275108 Jy
! Clean residual min=-0.002506 max=0.002604 Jy/beam
! Clean residual mean=-0.000004 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.203987 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.203987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061260Jy  sigma=1.304429
! Fit after  self-cal, rms=0.061265Jy  sigma=1.304333
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061265Jy  sigma=1.304333
! Fit after  self-cal, rms=0.061097Jy  sigma=1.290207
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.325 mas, bmaj=7.77 mas, bpa=-3.458 degrees
! Estimated noise=0.361772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112896 Jy
! Component: 100  -  total flux cleaned = 0.0016863 Jy
! Component: 150  -  total flux cleaned = 0.00190193 Jy
! Component: 200  -  total flux cleaned = 0.00202933 Jy
! Total flux subtracted in 200 components = 0.00202933 Jy
! Clean residual min=-0.002114 max=0.002067 Jy/beam
! Clean residual mean=-0.000007 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.206016 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 86 components and 0.206016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061071Jy  sigma=1.289597
! Fit after  self-cal, rms=0.061081Jy  sigma=1.289507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258712 Jy
! Component: 100  -  total flux cleaned = 0.000274516 Jy
! Component: 150  -  total flux cleaned = 0.000304595 Jy
! Component: 200  -  total flux cleaned = 0.000318447 Jy
! Total flux subtracted in 200 components = 0.000318447 Jy
! Clean residual min=-0.002106 max=0.002065 Jy/beam
! Clean residual mean=-0.000007 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.206335 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.206335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061073Jy  sigma=1.289346
! Fit after  self-cal, rms=0.061073Jy  sigma=1.289339
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061073Jy  sigma=1.289339
! Fit after  self-cal, rms=0.061093Jy  sigma=1.287974
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=7.767 mas, bpa=-3.47 degrees
! Estimated noise=0.362143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181999 Jy
! Component: 100  -  total flux cleaned = 0.00031327 Jy
! Component: 150  -  total flux cleaned = 0.000313507 Jy
! Component: 200  -  total flux cleaned = 0.000327801 Jy
! Total flux subtracted in 200 components = 0.000327801 Jy
! Clean residual min=-0.001874 max=0.001981 Jy/beam
! Clean residual mean=-0.000007 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.206663 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.206663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061086Jy  sigma=1.287781
! Fit after  self-cal, rms=0.061087Jy  sigma=1.287768
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (115.5, -19.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00153391 Jy
! Component: 100  -  total flux cleaned = 0.00181836 Jy
! Component: 150  -  total flux cleaned = 0.00186829 Jy
! Component: 200  -  total flux cleaned = 0.00180765 Jy
! Total flux subtracted in 200 components = 0.00180765 Jy
! Clean residual min=-0.001800 max=0.001649 Jy/beam
! Clean residual mean=-0.000006 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.20847 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 117 components and 0.20847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061041Jy  sigma=1.286622
! Fit after  self-cal, rms=0.061038Jy  sigma=1.286553
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061038Jy  sigma=1.286553
! Fit after  self-cal, rms=0.061028Jy  sigma=1.286458
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.451 mas, bmaj=11.56 mas, bpa=-2.091 degrees
! Estimated noise=0.452994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000959174 Jy
! Component: 100  -  total flux cleaned = 0.00114028 Jy
! Component: 150  -  total flux cleaned = 0.00115718 Jy
! Component: 200  -  total flux cleaned = 0.0011561 Jy
! Total flux subtracted in 200 components = 0.0011561 Jy
! Clean residual min=-0.001838 max=0.001708 Jy/beam
! Clean residual mean=-0.000013 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.209626 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 130 components and 0.209626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061024Jy  sigma=1.286418
! Fit after  self-cal, rms=0.061022Jy  sigma=1.286392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000223006 Jy
! Component: 100  -  total flux cleaned = 0.000222844 Jy
! Component: 150  -  total flux cleaned = 0.00023606 Jy
! Component: 200  -  total flux cleaned = 0.000260295 Jy
! Total flux subtracted in 200 components = 0.000260295 Jy
! Clean residual min=-0.001815 max=0.001709 Jy/beam
! Clean residual mean=-0.000012 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.209887 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 136 components and 0.209887 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.061022Jy  sigma=1.286383
! Fit after  self-cal, rms=0.061022Jy  sigma=1.286377
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=7.768 mas, bpa=-3.471 degrees
! Estimated noise=0.362053 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.326 x 7.768 at -3.471 degrees (North through East)
! Clean map  min=-0.0016565  max=0.17209 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.8 mas, bmaj=7.054 mas, bpa=-4.783 degrees
! Estimated noise=0.515379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.13318 Jy
! Component: 100  -  total flux cleaned = 0.162676 Jy
! Component: 150  -  total flux cleaned = 0.17418 Jy
! Component: 200  -  total flux cleaned = 0.181448 Jy
! Total flux subtracted in 200 components = 0.181448 Jy
! Clean residual min=-0.004000 max=0.004217 Jy/beam
! Clean residual mean=-0.000012 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.181448 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.181448 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=7.768 mas, bpa=-3.471 degrees
! Estimated noise=0.362053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647692 Jy
! Component: 100  -  total flux cleaned = 0.0109761 Jy
! Component: 150  -  total flux cleaned = 0.0144033 Jy
! Component: 200  -  total flux cleaned = 0.0171274 Jy
! Total flux subtracted in 200 components = 0.0171274 Jy
! Clean residual min=-0.001997 max=0.002720 Jy/beam
! Clean residual mean=-0.000011 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.198576 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.198576 Jy
! Inverting map 
! Added new window around map position (-0.5, 13.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269844 Jy
! Component: 100  -  total flux cleaned = 0.00461102 Jy
! Component: 150  -  total flux cleaned = 0.00616578 Jy
! Component: 200  -  total flux cleaned = 0.00744313 Jy
! Total flux subtracted in 200 components = 0.00744313 Jy
! Clean residual min=-0.001816 max=0.001609 Jy/beam
! Clean residual mean=-0.000007 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.206019 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 67 components and 0.206019 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.451 mas, bmaj=11.56 mas, bpa=-2.091 degrees
! Estimated noise=0.452994 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139251 Jy
! Component: 100  -  total flux cleaned = 0.00214431 Jy
! Component: 150  -  total flux cleaned = 0.00257676 Jy
! Component: 200  -  total flux cleaned = 0.00294219 Jy
! Total flux subtracted in 200 components = 0.00294219 Jy
! Clean residual min=-0.001963 max=0.001707 Jy/beam
! Clean residual mean=-0.000013 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.208961 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269799 Jy
! Component: 100  -  total flux cleaned = 0.000407738 Jy
! Component: 150  -  total flux cleaned = 0.000513644 Jy
! Component: 200  -  total flux cleaned = 0.000609415 Jy
! Total flux subtracted in 200 components = 0.000609415 Jy
! Clean residual min=-0.001895 max=0.001684 Jy/beam
! Clean residual mean=-0.000013 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.20957 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 121 components and 0.209571 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.326 mas, bmaj=7.768 mas, bpa=-3.471 degrees
! Estimated noise=0.362053 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206925 Jy
! Component: 100  -  total flux cleaned = 0.000282691 Jy
! Component: 150  -  total flux cleaned = 0.000307127 Jy
! Component: 200  -  total flux cleaned = 0.000373087 Jy
! Total flux subtracted in 200 components = 0.000373087 Jy
! Clean residual min=-0.001730 max=0.001567 Jy/beam
! Clean residual mean=-0.000005 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.209944 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 141 components and 0.209944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.060981Jy  sigma=1.285441
! Fit after  self-cal, rms=0.060975Jy  sigma=1.285305
wmodel J2212+0646_S_map.mod
! Writing 141 model components to file: J2212+0646_S_map.mod
wobs   J2212+0646_S_uvs.fits
! Writing UV FITS file: J2212+0646_S_uvs.fits
wwins  J2212+0646_S_map.win
! wwins: Wrote 4 windows to J2212+0646_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000638414 Jy
! Component: 100  -  total flux cleaned = -0.000873175 Jy
! Component: 150  -  total flux cleaned = -0.000791637 Jy
! Component: 200  -  total flux cleaned = -0.000738746 Jy
! Component: 250  -  total flux cleaned = -0.000713121 Jy
! Component: 300  -  total flux cleaned = -0.000713352 Jy
! Component: 350  -  total flux cleaned = -0.000738444 Jy
! Component: 400  -  total flux cleaned = -0.000858318 Jy
! Component: 450  -  total flux cleaned = -0.000857754 Jy
! Component: 500  -  total flux cleaned = -0.000858134 Jy
! Component: 550  -  total flux cleaned = -0.000858097 Jy
! Component: 600  -  total flux cleaned = -0.000836114 Jy
! Component: 650  -  total flux cleaned = -0.000836359 Jy
! Component: 700  -  total flux cleaned = -0.000921172 Jy
! Component: 750  -  total flux cleaned = -0.00092058 Jy
! Component: 800  -  total flux cleaned = -0.000941106 Jy
! Component: 850  -  total flux cleaned = -0.000940922 Jy
! Component: 900  -  total flux cleaned = -0.000960437 Jy
! Component: 950  -  total flux cleaned = -0.000881466 Jy
! Component: 1000  -  total flux cleaned = -0.000920976 Jy
! Component: 1050  -  total flux cleaned = -0.000959787 Jy
! Component: 1100  -  total flux cleaned = -0.00101673 Jy
! Component: 1150  -  total flux cleaned = -0.00101673 Jy
! Component: 1200  -  total flux cleaned = -0.00103509 Jy
! Component: 1250  -  total flux cleaned = -0.00107181 Jy
! Component: 1300  -  total flux cleaned = -0.00103534 Jy
! Component: 1350  -  total flux cleaned = -0.00101747 Jy
! Component: 1400  -  total flux cleaned = -0.000999812 Jy
! Component: 1450  -  total flux cleaned = -0.00100028 Jy
! Component: 1500  -  total flux cleaned = -0.00103513 Jy
! Component: 1550  -  total flux cleaned = -0.00105233 Jy
! Component: 1600  -  total flux cleaned = -0.00103524 Jy
! Component: 1650  -  total flux cleaned = -0.00110242 Jy
! Component: 1700  -  total flux cleaned = -0.00110237 Jy
! Component: 1750  -  total flux cleaned = -0.00110248 Jy
! Component: 1800  -  total flux cleaned = -0.00115124 Jy
! Component: 1850  -  total flux cleaned = -0.00113509 Jy
! Component: 1900  -  total flux cleaned = -0.00116684 Jy
! Component: 1950  -  total flux cleaned = -0.00116692 Jy
! Component: 2000  -  total flux cleaned = -0.00124543 Jy
! Component: 2050  -  total flux cleaned = -0.00124547 Jy
! Component: 2100  -  total flux cleaned = -0.0013069 Jy
! Component: 2150  -  total flux cleaned = -0.00127653 Jy
! Component: 2200  -  total flux cleaned = -0.00127656 Jy
! Component: 2250  -  total flux cleaned = -0.00130633 Jy
! Component: 2300  -  total flux cleaned = -0.00133607 Jy
! Component: 2350  -  total flux cleaned = -0.00136549 Jy
! Component: 2400  -  total flux cleaned = -0.00139477 Jy
! Component: 2450  -  total flux cleaned = -0.00142344 Jy
! Component: 2500  -  total flux cleaned = -0.00140899 Jy
! Component: 2550  -  total flux cleaned = -0.00140894 Jy
! Component: 2600  -  total flux cleaned = -0.00146539 Jy
! Component: 2650  -  total flux cleaned = -0.00145132 Jy
! Component: 2700  -  total flux cleaned = -0.00147922 Jy
! Component: 2750  -  total flux cleaned = -0.00152055 Jy
! Component: 2800  -  total flux cleaned = -0.00156148 Jy
! Component: 2850  -  total flux cleaned = -0.0015476 Jy
! Component: 2900  -  total flux cleaned = -0.00153414 Jy
! Component: 2950  -  total flux cleaned = -0.00157433 Jy
! Component: 3000  -  total flux cleaned = -0.00156096 Jy
! Component: 3050  -  total flux cleaned = -0.00162725 Jy
! Component: 3100  -  total flux cleaned = -0.00165342 Jy
! Component: 3150  -  total flux cleaned = -0.00173131 Jy
! Component: 3200  -  total flux cleaned = -0.00167953 Jy
! Component: 3250  -  total flux cleaned = -0.00174358 Jy
! Component: 3300  -  total flux cleaned = -0.00175612 Jy
! Component: 3350  -  total flux cleaned = -0.0016929 Jy
! Component: 3400  -  total flux cleaned = -0.00175572 Jy
! Component: 3450  -  total flux cleaned = -0.00179317 Jy
! Component: 3500  -  total flux cleaned = -0.00180535 Jy
! Component: 3550  -  total flux cleaned = -0.00180535 Jy
! Component: 3600  -  total flux cleaned = -0.00179315 Jy
! Component: 3650  -  total flux cleaned = -0.00184172 Jy
! Component: 3700  -  total flux cleaned = -0.00181761 Jy
! Component: 3750  -  total flux cleaned = -0.00181761 Jy
! Component: 3800  -  total flux cleaned = -0.00188882 Jy
! Component: 3850  -  total flux cleaned = -0.00193608 Jy
! Component: 3900  -  total flux cleaned = -0.00193601 Jy
! Component: 3950  -  total flux cleaned = -0.00197074 Jy
! Component: 4000  -  total flux cleaned = -0.00192454 Jy
! Component: 4050  -  total flux cleaned = -0.00195902 Jy
! Total flux subtracted in 4096 components = -0.00197053 Jy
! Clean residual min=-0.000615 max=0.000781 Jy/beam
! Clean residual mean=-0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.207973 Jy
keep
! Adding 287 model components to the UV plane model.
! The established model now contains 428 components and 0.207973 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2212+0646_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.326 x 7.768 at -3.471 degrees (North through East)
! Clean map  min=-0.0012911  max=0.17232 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2212+0646_S_map.fits
wmodel /vlbi/uf001/uva//J2212+0646_S_map.mod
! Writing 428 model components to file: /vlbi/uf001/uva//J2212+0646_S_map.mod
wobs   /vlbi/uf001/uva//J2212+0646_S_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2212+0646_S_uvs.fits
wwins  /vlbi/uf001/uva//J2212+0646_S_map.win
! wwins: Wrote 5 windows to /vlbi/uf001/uva//J2212+0646_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.172317 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210635 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.366711 0.366711 0.733422 1.46684 2.93369 5.86738 11.7348 23.4695 46.939 93.878
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.172 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  818.082 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2212+0646_S_dfm.log closed on Mon Jan 14 06:11:09 2019