! Started logfile: /vlbi/uf001/uva//J2211-3707_S_dfm.log on Mon Jan 14 06:10:38 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2211-3707_S_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2211-3707_S_uva.fits ! AN table 1: 29 integrations on 28 of 28 possible baselines. ! AN table 2: 29 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.992996 visibilities/baseline/integration-bin. ! Found source: J2211-3707 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 5529 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2211-3707_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009207Jy sigma=13.401667 ! Fit after self-cal, rms=0.860178Jy sigma=11.324008 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=8.275 mas, bpa=3.386 degrees ! Estimated noise=1.32158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109473 Jy ! Component: 100 - total flux cleaned = 0.139033 Jy ! Total flux subtracted in 100 components = 0.139033 Jy ! Clean residual min=-0.009070 max=0.014284 Jy/beam ! Clean residual mean=-0.000292 rms=0.002811 Jy/beam ! Combined flux in latest and established models = 0.139033 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.139033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.104922Jy sigma=1.326937 ! Fit after self-cal, rms=0.104860Jy sigma=1.326525 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=9.794 mas, bpa=0.2694 degrees ! Estimated noise=0.744809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229293 Jy ! Component: 100 - total flux cleaned = 0.0355214 Jy ! Component: 150 - total flux cleaned = 0.0432521 Jy ! Component: 200 - total flux cleaned = 0.0480993 Jy ! Total flux subtracted in 200 components = 0.0480993 Jy ! Clean residual min=-0.006567 max=0.009848 Jy/beam ! Clean residual mean=-0.000244 rms=0.001740 Jy/beam ! Combined flux in latest and established models = 0.187133 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 0.187133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100523Jy sigma=1.244869 ! Fit after self-cal, rms=0.100412Jy sigma=1.242378 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 9.794 at 0.2694 degrees (North through East) ! Clean map min=-0.0065935 max=0.13642 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.10 KP 1.03 LA 0.84 ! NL 1.22 OV 1.02 PT 0.98 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.99 KP 1.05 LA 0.86 ! MK 0.97 NL 1.37 OV 0.97 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.22 KP 1.05 LA 0.87 ! NL 1.12 OV 0.96 PT 0.95 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 0.91 KP 1.03 LA 0.85 ! MK 1.07 NL 1.34 OV 0.97 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 HN 1.21 KP 0.98 LA 0.95 ! NL 1.06 OV 0.96 PT 1.03 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 0.92 KP 1.02 LA 0.91 ! MK 0.97 NL 1.25 OV 0.96 PT 0.98 ! SC 1.07 ! ! ! Fit before self-cal, rms=0.100412Jy sigma=1.242378 ! Fit after self-cal, rms=0.107585Jy sigma=1.214190 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=9.957 mas, bpa=0.2121 degrees ! Estimated noise=0.748918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159524 Jy ! Component: 100 - total flux cleaned = -0.00153361 Jy ! Component: 150 - total flux cleaned = -0.00153263 Jy ! Component: 200 - total flux cleaned = -0.00153081 Jy ! Total flux subtracted in 200 components = -0.00153081 Jy ! Clean residual min=-0.003750 max=0.003117 Jy/beam ! Clean residual mean=0.000003 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.185602 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 58 components and 0.185602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107502Jy sigma=1.213414 ! Fit after self-cal, rms=0.107836Jy sigma=1.212740 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.107836Jy sigma=1.212740 ! Fit after self-cal, rms=0.108741Jy sigma=1.212583 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.343 mas, bmaj=9.969 mas, bpa=0.12 degrees ! Estimated noise=0.748347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001144 Jy ! Component: 100 - total flux cleaned = -0.00114042 Jy ! Component: 150 - total flux cleaned = -0.00114033 Jy ! Component: 200 - total flux cleaned = -0.00113967 Jy ! Total flux subtracted in 200 components = -0.00113967 Jy ! Clean residual min=-0.003503 max=0.003027 Jy/beam ! Clean residual mean=0.000006 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.184462 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.184462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108689Jy sigma=1.212133 ! Fit after self-cal, rms=0.108700Jy sigma=1.212096 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000342443 Jy ! Component: 100 - total flux cleaned = -0.00034292 Jy ! Component: 150 - total flux cleaned = -0.000374848 Jy ! Component: 200 - total flux cleaned = -0.000374431 Jy ! Total flux subtracted in 200 components = -0.000374431 Jy ! Clean residual min=-0.003459 max=0.003010 Jy/beam ! Clean residual mean=0.000002 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.184088 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.184088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108677Jy sigma=1.211858 ! Fit after self-cal, rms=0.108668Jy sigma=1.211848 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.108668Jy sigma=1.211848 ! Fit after self-cal, rms=0.109436Jy sigma=1.211717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=9.986 mas, bpa=0.02224 degrees ! Estimated noise=0.747767 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000803283 Jy ! Component: 100 - total flux cleaned = -0.000803881 Jy ! Component: 150 - total flux cleaned = -0.000835488 Jy ! Component: 200 - total flux cleaned = -0.000865281 Jy ! Total flux subtracted in 200 components = -0.000865281 Jy ! Clean residual min=-0.003469 max=0.002970 Jy/beam ! Clean residual mean=0.000005 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.183223 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.183222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109406Jy sigma=1.211490 ! Fit after self-cal, rms=0.109418Jy sigma=1.211475 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242491 Jy ! Component: 100 - total flux cleaned = -0.000241961 Jy ! Component: 150 - total flux cleaned = -0.000266817 Jy ! Component: 200 - total flux cleaned = -0.000266755 Jy ! Total flux subtracted in 200 components = -0.000266755 Jy ! Clean residual min=-0.003458 max=0.002968 Jy/beam ! Clean residual mean=0.000003 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.182956 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 74 components and 0.182956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109405Jy sigma=1.211344 ! Fit after self-cal, rms=0.109399Jy sigma=1.211340 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109399Jy sigma=1.211340 ! Fit after self-cal, rms=0.109972Jy sigma=1.211259 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.507 mas, bmaj=24.4 mas, bpa=-1.754 degrees ! Estimated noise=0.904799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544822 Jy ! Component: 100 - total flux cleaned = -0.000588239 Jy ! Component: 150 - total flux cleaned = -0.000587442 Jy ! Component: 200 - total flux cleaned = -0.000587636 Jy ! Total flux subtracted in 200 components = -0.000587636 Jy ! Clean residual min=-0.003335 max=0.002540 Jy/beam ! Clean residual mean=0.000008 rms=0.000861 Jy/beam ! Combined flux in latest and established models = 0.182368 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 82 components and 0.182368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109966Jy sigma=1.211197 ! Fit after self-cal, rms=0.109976Jy sigma=1.211168 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.36548e-05 Jy ! Component: 100 - total flux cleaned = -7.78613e-05 Jy ! Component: 150 - total flux cleaned = -7.75556e-05 Jy ! Component: 200 - total flux cleaned = -6.51165e-05 Jy ! Total flux subtracted in 200 components = -6.51165e-05 Jy ! Clean residual min=-0.003336 max=0.002486 Jy/beam ! Clean residual mean=0.000006 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.182303 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 87 components and 0.182303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.109975Jy sigma=1.211163 ! Fit after self-cal, rms=0.109970Jy sigma=1.211152 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=9.998 mas, bpa=-0.05877 degrees ! Estimated noise=0.746871 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 9.998 at -0.05877 degrees (North through East) ! Clean map min=-0.0033134 max=0.13745 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=8.355 mas, bpa=2.999 degrees ! Estimated noise=1.3341 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110141 Jy ! Component: 100 - total flux cleaned = 0.140094 Jy ! Component: 150 - total flux cleaned = 0.154809 Jy ! Component: 200 - total flux cleaned = 0.163427 Jy ! Total flux subtracted in 200 components = 0.163427 Jy ! Clean residual min=-0.006198 max=0.005525 Jy/beam ! Clean residual mean=-0.000075 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.163427 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.163427 Jy ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=9.998 mas, bpa=-0.05877 degrees ! Estimated noise=0.746871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813919 Jy ! Component: 100 - total flux cleaned = 0.012479 Jy ! Component: 150 - total flux cleaned = 0.014964 Jy ! Component: 200 - total flux cleaned = 0.0160984 Jy ! Total flux subtracted in 200 components = 0.0160984 Jy ! Clean residual min=-0.004048 max=0.003191 Jy/beam ! Clean residual mean=-0.000016 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.179525 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.179525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.507 mas, bmaj=24.4 mas, bpa=-1.754 degrees ! Estimated noise=0.904799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119585 Jy ! Component: 100 - total flux cleaned = 0.00125977 Jy ! Component: 150 - total flux cleaned = 0.00131302 Jy ! Component: 200 - total flux cleaned = 0.00136193 Jy ! Total flux subtracted in 200 components = 0.00136193 Jy ! Clean residual min=-0.003273 max=0.002785 Jy/beam ! Clean residual mean=-0.000011 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.180887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.67758e-05 Jy ! Component: 100 - total flux cleaned = 9.29161e-05 Jy ! Component: 150 - total flux cleaned = 0.000136059 Jy ! Component: 200 - total flux cleaned = 0.000197975 Jy ! Total flux subtracted in 200 components = 0.000197975 Jy ! Clean residual min=-0.003233 max=0.002765 Jy/beam ! Clean residual mean=-0.000009 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.181085 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 90 components and 0.181085 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=9.998 mas, bpa=-0.05877 degrees ! Estimated noise=0.746871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468509 Jy ! Component: 100 - total flux cleaned = -0.000476035 Jy ! Component: 150 - total flux cleaned = -0.000476413 Jy ! Component: 200 - total flux cleaned = -0.000439869 Jy ! Total flux subtracted in 200 components = -0.000439869 Jy ! Clean residual min=-0.003765 max=0.003051 Jy/beam ! Clean residual mean=-0.000008 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.180645 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.180645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.110031Jy sigma=1.211792 ! Fit after self-cal, rms=0.110018Jy sigma=1.211742 wmodel J2211-3707_S_map.mod ! Writing 98 model components to file: J2211-3707_S_map.mod wobs J2211-3707_S_uvs.fits ! Writing UV FITS file: J2211-3707_S_uvs.fits wwins J2211-3707_S_map.win ! wwins: Wrote 2 windows to J2211-3707_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139913 Jy ! Component: 100 - total flux cleaned = -0.00221119 Jy ! Component: 150 - total flux cleaned = -0.00291967 Jy ! Component: 200 - total flux cleaned = -0.00354675 Jy ! Component: 250 - total flux cleaned = -0.00396094 Jy ! Component: 300 - total flux cleaned = -0.0043612 Jy ! Component: 350 - total flux cleaned = -0.0048344 Jy ! Component: 400 - total flux cleaned = -0.00500146 Jy ! Component: 450 - total flux cleaned = -0.00524533 Jy ! Component: 500 - total flux cleaned = -0.00552228 Jy ! Component: 550 - total flux cleaned = -0.00571553 Jy ! Component: 600 - total flux cleaned = -0.00605271 Jy ! Component: 650 - total flux cleaned = -0.00619817 Jy ! Component: 700 - total flux cleaned = -0.00634088 Jy ! Component: 750 - total flux cleaned = -0.00641068 Jy ! Component: 800 - total flux cleaned = -0.00647849 Jy ! Component: 850 - total flux cleaned = -0.00654517 Jy ! Component: 900 - total flux cleaned = -0.00654569 Jy ! Component: 950 - total flux cleaned = -0.00667472 Jy ! Component: 1000 - total flux cleaned = -0.00676873 Jy ! Component: 1050 - total flux cleaned = -0.00689139 Jy ! Component: 1100 - total flux cleaned = -0.00689096 Jy ! Component: 1150 - total flux cleaned = -0.00697942 Jy ! Component: 1200 - total flux cleaned = -0.00700806 Jy ! Component: 1250 - total flux cleaned = -0.00700832 Jy ! Component: 1300 - total flux cleaned = -0.00703638 Jy ! Component: 1350 - total flux cleaned = -0.00717457 Jy ! Component: 1400 - total flux cleaned = -0.00720221 Jy ! Component: 1450 - total flux cleaned = -0.00725656 Jy ! Component: 1500 - total flux cleaned = -0.00736286 Jy ! Component: 1550 - total flux cleaned = -0.00736267 Jy ! Component: 1600 - total flux cleaned = -0.00741436 Jy ! Component: 1650 - total flux cleaned = -0.00741431 Jy ! Component: 1700 - total flux cleaned = -0.00749017 Jy ! Component: 1750 - total flux cleaned = -0.0074401 Jy ! Component: 1800 - total flux cleaned = -0.00756314 Jy ! Component: 1850 - total flux cleaned = -0.00758696 Jy ! Component: 1900 - total flux cleaned = -0.00756276 Jy ! Component: 1950 - total flux cleaned = -0.00756252 Jy ! Component: 2000 - total flux cleaned = -0.0075861 Jy ! Component: 2050 - total flux cleaned = -0.00760933 Jy ! Component: 2100 - total flux cleaned = -0.00763224 Jy ! Component: 2150 - total flux cleaned = -0.00760937 Jy ! Component: 2200 - total flux cleaned = -0.00758683 Jy ! Component: 2250 - total flux cleaned = -0.00756473 Jy ! Component: 2300 - total flux cleaned = -0.00758693 Jy ! Component: 2350 - total flux cleaned = -0.00760897 Jy ! Component: 2400 - total flux cleaned = -0.00765208 Jy ! Component: 2450 - total flux cleaned = -0.00767354 Jy ! Component: 2500 - total flux cleaned = -0.00769484 Jy ! Component: 2550 - total flux cleaned = -0.00769482 Jy ! Component: 2600 - total flux cleaned = -0.00771559 Jy ! Component: 2650 - total flux cleaned = -0.00773619 Jy ! Component: 2700 - total flux cleaned = -0.0077567 Jy ! Component: 2750 - total flux cleaned = -0.00773648 Jy ! Component: 2800 - total flux cleaned = -0.00773675 Jy ! Component: 2850 - total flux cleaned = -0.00777658 Jy ! Component: 2900 - total flux cleaned = -0.00781581 Jy ! Component: 2950 - total flux cleaned = -0.00779635 Jy ! Component: 3000 - total flux cleaned = -0.00779665 Jy ! Component: 3050 - total flux cleaned = -0.00785448 Jy ! Component: 3100 - total flux cleaned = -0.00787339 Jy ! Component: 3150 - total flux cleaned = -0.00789228 Jy ! Component: 3200 - total flux cleaned = -0.00791109 Jy ! Component: 3250 - total flux cleaned = -0.008004 Jy ! Component: 3300 - total flux cleaned = -0.00804075 Jy ! Component: 3350 - total flux cleaned = -0.00807724 Jy ! Component: 3400 - total flux cleaned = -0.00811368 Jy ! Component: 3450 - total flux cleaned = -0.00814971 Jy ! Component: 3500 - total flux cleaned = -0.00818555 Jy ! Component: 3550 - total flux cleaned = -0.0082742 Jy ! Component: 3600 - total flux cleaned = -0.00832704 Jy ! Component: 3650 - total flux cleaned = -0.00837955 Jy ! Component: 3700 - total flux cleaned = -0.0084144 Jy ! Component: 3750 - total flux cleaned = -0.00853517 Jy ! Component: 3800 - total flux cleaned = -0.00865494 Jy ! Component: 3850 - total flux cleaned = -0.00867199 Jy ! Component: 3900 - total flux cleaned = -0.00875628 Jy ! Component: 3950 - total flux cleaned = -0.00878987 Jy ! Component: 4000 - total flux cleaned = -0.00890669 Jy ! Component: 4050 - total flux cleaned = -0.0089398 Jy ! Total flux subtracted in 4096 components = -0.00902223 Jy ! Clean residual min=-0.001072 max=0.000921 Jy/beam ! Clean residual mean=0.000005 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.171623 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 341 components and 0.171623 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2211-3707_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.338 x 9.998 at -0.05877 degrees (North through East) ! Clean map min=-0.002522 max=0.1401 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2211-3707_S_map.fits wmodel /vlbi/uf001/uva//J2211-3707_S_map.mod ! Writing 341 model components to file: /vlbi/uf001/uva//J2211-3707_S_map.mod wobs /vlbi/uf001/uva//J2211-3707_S_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2211-3707_S_uvs.fits wwins /vlbi/uf001/uva//J2211-3707_S_map.win ! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2211-3707_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.140103 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293836 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.629186 0.629186 1.25837 2.51674 5.03349 10.067 20.134 40.2679 80.5358 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.14 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 476.806 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2211-3707_S_dfm.log closed on Mon Jan 14 06:10:42 2019