! Started logfile: /vlbi/uf001/uva//J2210+0857_X_dfm.log on Mon Jan 14 06:10:10 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/uf001/uva//J2210+0857_X_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2210+0857_X_uva.fits
! AN table 1: 57 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.923002 visibilities/baseline/integration-bin.
! Found source: J2210+0857
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2210+0857_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005695Jy  sigma=23.673582
! Fit after  self-cal, rms=0.946613Jy  sigma=22.255766
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6487 mas, bmaj=1.595 mas, bpa=-1.533 degrees
! Estimated noise=0.368356 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.03771 Jy
! Component: 100  -  total flux cleaned = 0.0510546 Jy
! Total flux subtracted in 100 components = 0.0510546 Jy
! Clean residual min=-0.004506 max=0.011613 Jy/beam
! Clean residual mean=0.000001 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.0510546 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0510546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065485Jy  sigma=1.474018
! Fit after  self-cal, rms=0.064292Jy  sigma=1.446077
! Inverting map 
! Added new window around map position (-1.2, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120276 Jy
! Component: 100  -  total flux cleaned = 0.0195435 Jy
! Total flux subtracted in 100 components = 0.0195435 Jy
! Clean residual min=-0.003602 max=0.004699 Jy/beam
! Clean residual mean=0.000001 rms=0.000879 Jy/beam
! Combined flux in latest and established models = 0.0705981 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.0705981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060801Jy  sigma=1.352789
! Fit after  self-cal, rms=0.060549Jy  sigma=1.346265
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00704626 Jy
! Component: 100  -  total flux cleaned = 0.0119092 Jy
! Total flux subtracted in 100 components = 0.0119092 Jy
! Clean residual min=-0.003369 max=0.004089 Jy/beam
! Clean residual mean=0.000000 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.0825073 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.0825073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059110Jy  sigma=1.306761
! Fit after  self-cal, rms=0.059063Jy  sigma=1.305293
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8206 mas, bmaj=1.848 mas, bpa=-1.787 degrees
! Estimated noise=0.214685 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00789153 Jy
! Component: 100  -  total flux cleaned = 0.0135337 Jy
! Component: 150  -  total flux cleaned = 0.0177689 Jy
! Component: 200  -  total flux cleaned = 0.020983 Jy
! Total flux subtracted in 200 components = 0.020983 Jy
! Clean residual min=-0.003092 max=0.003847 Jy/beam
! Clean residual mean=-0.000001 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.10349 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 54 components and 0.10349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057768Jy  sigma=1.267777
! Fit after  self-cal, rms=0.057733Jy  sigma=1.266266
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8206 x 1.848 at -1.787 degrees (North through East)
! Clean map  min=-0.0028886  max=0.054952 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     HN        1.08     KP        0.99     LA        0.91     
!   MK        1.20     NL        1.02     OV        0.86     PT        0.87     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     HN        1.14     KP        1.05     LA        0.96     
!   MK        1.22     NL        1.07     OV        0.82     PT        0.90     
!   SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        1.02     KP        1.00     LA        0.97     
!   MK        1.17     NL        1.15     OV        0.85     PT        0.86     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.09     KP        1.07     LA        0.94     
!   MK        1.12     NL        1.11     OV        0.87     PT        0.89     
!   SC        1.18     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.05     KP        1.00     LA        0.99     
!   MK        1.21     NL        1.14     OV        0.82     PT        0.87     
!   SC        1.13     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        1.10     KP        1.10     LA        1.00     
!   MK        1.04     NL        1.08     OV        0.82     PT        0.83     
!   SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.99     KP        1.07     LA        1.00     
!   MK        1.16     NL        1.22     OV        0.87     PT        0.88     
!   SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.08     KP        1.06     LA        0.99     
!   MK        1.23     NL        1.10     OV        0.88     PT        0.89     
!   SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.04     KP        1.04     LA        0.99     
!   MK        1.11     NL        1.10     OV        0.85     PT        0.92     
!   SC        1.05     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.04     KP        1.02     LA        0.98     
!   MK        1.07     NL        1.07     OV        0.90     PT        0.89     
!   SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.14     KP        1.06     LA        1.04     
!   MK        0.99     NL        1.11     OV        0.90     PT        0.89     
!   SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     HN        1.06     KP        1.03     LA        0.96     
!   MK        0.98     NL        1.09     OV        0.88     PT        0.90     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.057733Jy  sigma=1.266266
! Fit after  self-cal, rms=0.060089Jy  sigma=1.244647
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8465 mas, bmaj=1.902 mas, bpa=-0.9886 degrees
! Estimated noise=0.218922 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164617 Jy
! Component: 100  -  total flux cleaned = 0.00160546 Jy
! Component: 150  -  total flux cleaned = 0.00148947 Jy
! Component: 200  -  total flux cleaned = 0.0015245 Jy
! Total flux subtracted in 200 components = 0.0015245 Jy
! Clean residual min=-0.001399 max=0.001555 Jy/beam
! Clean residual mean=-0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.105015 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 0.105015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060000Jy  sigma=1.242634
! Fit after  self-cal, rms=0.060132Jy  sigma=1.241642
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060132Jy  sigma=1.241642
! Fit after  self-cal, rms=0.059967Jy  sigma=1.236801
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8471 mas, bmaj=1.899 mas, bpa=-1.291 degrees
! Estimated noise=0.218178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067452 Jy
! Component: 100  -  total flux cleaned = 0.000709086 Jy
! Component: 150  -  total flux cleaned = 0.000655518 Jy
! Component: 200  -  total flux cleaned = 0.000605706 Jy
! Total flux subtracted in 200 components = 0.000605706 Jy
! Clean residual min=-0.001288 max=0.001421 Jy/beam
! Clean residual mean=-0.000000 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.10562 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 75 components and 0.10562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059933Jy  sigma=1.236189
! Fit after  self-cal, rms=0.059963Jy  sigma=1.235943
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28.8, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989262 Jy
! Component: 100  -  total flux cleaned = 0.00127432 Jy
! Component: 150  -  total flux cleaned = 0.00129768 Jy
! Component: 200  -  total flux cleaned = 0.0012968 Jy
! Total flux subtracted in 200 components = 0.0012968 Jy
! Clean residual min=-0.001246 max=0.001211 Jy/beam
! Clean residual mean=-0.000000 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.106917 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 83 components and 0.106917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059928Jy  sigma=1.235302
! Fit after  self-cal, rms=0.059925Jy  sigma=1.235221
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059925Jy  sigma=1.235221
! Fit after  self-cal, rms=0.059785Jy  sigma=1.234744
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8455 mas, bmaj=1.899 mas, bpa=-1.318 degrees
! Estimated noise=0.21727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000250982 Jy
! Component: 100  -  total flux cleaned = 0.000372076 Jy
! Component: 150  -  total flux cleaned = 0.000392347 Jy
! Component: 200  -  total flux cleaned = 0.000431428 Jy
! Total flux subtracted in 200 components = 0.000431428 Jy
! Clean residual min=-0.001208 max=0.001145 Jy/beam
! Clean residual mean=-0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.107349 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 89 components and 0.107349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059765Jy  sigma=1.234409
! Fit after  self-cal, rms=0.059770Jy  sigma=1.234359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.14728e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100179 Jy
! Component: 150  -  total flux cleaned = 0.000154695 Jy
! Component: 200  -  total flux cleaned = 0.000172285 Jy
! Total flux subtracted in 200 components = 0.000172285 Jy
! Clean residual min=-0.001186 max=0.001146 Jy/beam
! Clean residual mean=-0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.107521 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.107521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059757Jy  sigma=1.234141
! Fit after  self-cal, rms=0.059758Jy  sigma=1.234119
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059758Jy  sigma=1.234119
! Fit after  self-cal, rms=0.059527Jy  sigma=1.234093
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.965 mas, bmaj=3.037 mas, bpa=-5.468 degrees
! Estimated noise=0.27439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000351039 Jy
! Component: 100  -  total flux cleaned = 0.000350706 Jy
! Component: 150  -  total flux cleaned = 0.000351411 Jy
! Component: 200  -  total flux cleaned = 0.000351929 Jy
! Total flux subtracted in 200 components = 0.000351929 Jy
! Clean residual min=-0.001290 max=0.001162 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.107873 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 101 components and 0.107873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059525Jy  sigma=1.234043
! Fit after  self-cal, rms=0.059524Jy  sigma=1.234008
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.71748e-06 Jy
! Component: 100  -  total flux cleaned = -4.53303e-06 Jy
! Component: 150  -  total flux cleaned = -2.44447e-05 Jy
! Component: 200  -  total flux cleaned = -2.46734e-05 Jy
! Total flux subtracted in 200 components = -2.46734e-05 Jy
! Clean residual min=-0.001264 max=0.001149 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.107848 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 109 components and 0.107848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059525Jy  sigma=1.234022
! Fit after  self-cal, rms=0.059525Jy  sigma=1.234013
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.844 mas, bmaj=1.899 mas, bpa=-1.415 degrees
! Estimated noise=0.2166 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.844 x 1.899 at -1.415 degrees (North through East)
! Clean map  min=-0.0010933  max=0.054411 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.665 mas, bmaj=1.627 mas, bpa=-1.207 degrees
! Estimated noise=0.381159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0393056 Jy
! Component: 100  -  total flux cleaned = 0.0576284 Jy
! Component: 150  -  total flux cleaned = 0.0690033 Jy
! Component: 200  -  total flux cleaned = 0.0766088 Jy
! Total flux subtracted in 200 components = 0.0766088 Jy
! Clean residual min=-0.002593 max=0.004225 Jy/beam
! Clean residual mean=-0.000000 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.0766089 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0766089 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.844 mas, bmaj=1.899 mas, bpa=-1.415 degrees
! Estimated noise=0.2166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00851381 Jy
! Component: 100  -  total flux cleaned = 0.0141239 Jy
! Component: 150  -  total flux cleaned = 0.0180603 Jy
! Component: 200  -  total flux cleaned = 0.0209638 Jy
! Total flux subtracted in 200 components = 0.0209638 Jy
! Clean residual min=-0.001482 max=0.002290 Jy/beam
! Clean residual mean=-0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.0975727 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 39 components and 0.0975727 Jy
! Inverting map 
! Added new window around map position (0.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247701 Jy
! Component: 100  -  total flux cleaned = 0.00436931 Jy
! Component: 150  -  total flux cleaned = 0.00589411 Jy
! Component: 200  -  total flux cleaned = 0.00713179 Jy
! Total flux subtracted in 200 components = 0.00713179 Jy
! Clean residual min=-0.001214 max=0.001112 Jy/beam
! Clean residual mean=-0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.104704 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 61 components and 0.104704 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.965 mas, bmaj=3.037 mas, bpa=-5.468 degrees
! Estimated noise=0.27439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167957 Jy
! Component: 100  -  total flux cleaned = 0.00229948 Jy
! Component: 150  -  total flux cleaned = 0.00269441 Jy
! Component: 200  -  total flux cleaned = 0.00288924 Jy
! Total flux subtracted in 200 components = 0.00288924 Jy
! Clean residual min=-0.001247 max=0.001190 Jy/beam
! Clean residual mean=-0.000001 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.107594 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164908 Jy
! Component: 100  -  total flux cleaned = 0.000285439 Jy
! Component: 150  -  total flux cleaned = 0.000338716 Jy
! Component: 200  -  total flux cleaned = 0.000416257 Jy
! Total flux subtracted in 200 components = 0.000416257 Jy
! Clean residual min=-0.001165 max=0.001124 Jy/beam
! Clean residual mean=-0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.10801 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 98 components and 0.10801 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.844 mas, bmaj=1.899 mas, bpa=-1.415 degrees
! Estimated noise=0.2166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.0543e-05 Jy
! Component: 100  -  total flux cleaned = 8.37788e-05 Jy
! Component: 150  -  total flux cleaned = 0.000198876 Jy
! Component: 200  -  total flux cleaned = 0.000251557 Jy
! Total flux subtracted in 200 components = 0.000251557 Jy
! Clean residual min=-0.001160 max=0.001034 Jy/beam
! Clean residual mean=-0.000000 rms=0.000254 Jy/beam
! Combined flux in latest and established models = 0.108261 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.108261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059488Jy  sigma=1.233254
! Fit after  self-cal, rms=0.059473Jy  sigma=1.233050
wmodel J2210+0857_X_map.mod
! Writing 117 model components to file: J2210+0857_X_map.mod
wobs   J2210+0857_X_uvs.fits
! Writing UV FITS file: J2210+0857_X_uvs.fits
wwins  J2210+0857_X_map.win
! wwins: Wrote 5 windows to J2210+0857_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000446821 Jy
! Component: 100  -  total flux cleaned = -0.000467792 Jy
! Component: 150  -  total flux cleaned = -0.000413513 Jy
! Component: 200  -  total flux cleaned = -0.00039554 Jy
! Component: 250  -  total flux cleaned = -0.000378292 Jy
! Component: 300  -  total flux cleaned = -0.000378403 Jy
! Component: 350  -  total flux cleaned = -0.000362459 Jy
! Component: 400  -  total flux cleaned = -0.00034668 Jy
! Component: 450  -  total flux cleaned = -0.000299564 Jy
! Component: 500  -  total flux cleaned = -0.000284052 Jy
! Component: 550  -  total flux cleaned = -0.000238417 Jy
! Component: 600  -  total flux cleaned = -0.000193539 Jy
! Component: 650  -  total flux cleaned = -0.000120064 Jy
! Component: 700  -  total flux cleaned = -7.66499e-05 Jy
! Component: 750  -  total flux cleaned = -1.94683e-05 Jy
! Component: 800  -  total flux cleaned = 3.72064e-05 Jy
! Component: 850  -  total flux cleaned = 5.12699e-05 Jy
! Component: 900  -  total flux cleaned = 0.000106464 Jy
! Component: 950  -  total flux cleaned = 0.00014741 Jy
! Component: 1000  -  total flux cleaned = 0.00012061 Jy
! Component: 1050  -  total flux cleaned = 0.00016063 Jy
! Component: 1100  -  total flux cleaned = 0.000213357 Jy
! Component: 1150  -  total flux cleaned = 0.000213313 Jy
! Component: 1200  -  total flux cleaned = 0.000239273 Jy
! Component: 1250  -  total flux cleaned = 0.000200936 Jy
! Component: 1300  -  total flux cleaned = 0.000226331 Jy
! Component: 1350  -  total flux cleaned = 0.00023872 Jy
! Component: 1400  -  total flux cleaned = 0.000213928 Jy
! Component: 1450  -  total flux cleaned = 0.000226337 Jy
! Component: 1500  -  total flux cleaned = 0.000165388 Jy
! Component: 1550  -  total flux cleaned = 0.000141297 Jy
! Component: 1600  -  total flux cleaned = 0.000177149 Jy
! Component: 1650  -  total flux cleaned = 0.000165354 Jy
! Component: 1700  -  total flux cleaned = 0.000177038 Jy
! Component: 1750  -  total flux cleaned = 0.000223559 Jy
! Component: 1800  -  total flux cleaned = 0.000223633 Jy
! Component: 1850  -  total flux cleaned = 0.000246556 Jy
! Component: 1900  -  total flux cleaned = 0.000257762 Jy
! Component: 1950  -  total flux cleaned = 0.0002462 Jy
! Component: 2000  -  total flux cleaned = 0.000234873 Jy
! Component: 2050  -  total flux cleaned = 0.000257186 Jy
! Component: 2100  -  total flux cleaned = 0.000213066 Jy
! Component: 2150  -  total flux cleaned = 0.0003007 Jy
! Component: 2200  -  total flux cleaned = 0.00033322 Jy
! Component: 2250  -  total flux cleaned = 0.000311575 Jy
! Component: 2300  -  total flux cleaned = 0.000386627 Jy
! Component: 2350  -  total flux cleaned = 0.000365337 Jy
! Component: 2400  -  total flux cleaned = 0.000418176 Jy
! Component: 2450  -  total flux cleaned = 0.000418306 Jy
! Component: 2500  -  total flux cleaned = 0.000491288 Jy
! Component: 2550  -  total flux cleaned = 0.000470477 Jy
! Component: 2600  -  total flux cleaned = 0.000532381 Jy
! Component: 2650  -  total flux cleaned = 0.000542561 Jy
! Component: 2700  -  total flux cleaned = 0.000613682 Jy
! Component: 2750  -  total flux cleaned = 0.000633909 Jy
! Component: 2800  -  total flux cleaned = 0.000694174 Jy
! Component: 2850  -  total flux cleaned = 0.000704199 Jy
! Component: 2900  -  total flux cleaned = 0.000704213 Jy
! Component: 2950  -  total flux cleaned = 0.000773248 Jy
! Component: 3000  -  total flux cleaned = 0.000792971 Jy
! Component: 3050  -  total flux cleaned = 0.000812467 Jy
! Component: 3100  -  total flux cleaned = 0.000841561 Jy
! Component: 3150  -  total flux cleaned = 0.000899309 Jy
! Component: 3200  -  total flux cleaned = 0.000908846 Jy
! Component: 3250  -  total flux cleaned = 0.000975345 Jy
! Component: 3300  -  total flux cleaned = 0.000975381 Jy
! Component: 3350  -  total flux cleaned = 0.00101293 Jy
! Component: 3400  -  total flux cleaned = 0.00105965 Jy
! Component: 3450  -  total flux cleaned = 0.00105955 Jy
! Component: 3500  -  total flux cleaned = 0.001078 Jy
! Component: 3550  -  total flux cleaned = 0.00111468 Jy
! Component: 3600  -  total flux cleaned = 0.0011421 Jy
! Component: 3650  -  total flux cleaned = 0.00117849 Jy
! Component: 3700  -  total flux cleaned = 0.00120564 Jy
! Component: 3750  -  total flux cleaned = 0.00120552 Jy
! Component: 3800  -  total flux cleaned = 0.00121456 Jy
! Component: 3850  -  total flux cleaned = 0.00125906 Jy
! Component: 3900  -  total flux cleaned = 0.00128569 Jy
! Component: 3950  -  total flux cleaned = 0.00128569 Jy
! Component: 4000  -  total flux cleaned = 0.00132076 Jy
! Component: 4050  -  total flux cleaned = 0.00132078 Jy
! Total flux subtracted in 4096 components = 0.00130337 Jy
! Clean residual min=-0.000514 max=0.000461 Jy/beam
! Clean residual mean=-0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.109565 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 412 components and 0.109565 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2210+0857_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.844 x 1.899 at -1.415 degrees (North through East)
! Clean map  min=-0.00083089  max=0.05401 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2210+0857_X_map.fits
wmodel /vlbi/uf001/uva//J2210+0857_X_map.mod
! Writing 412 model components to file: /vlbi/uf001/uva//J2210+0857_X_map.mod
wobs   /vlbi/uf001/uva//J2210+0857_X_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2210+0857_X_uvs.fits
wwins  /vlbi/uf001/uva//J2210+0857_X_map.win
! wwins: Wrote 6 windows to /vlbi/uf001/uva//J2210+0857_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0540102 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146002 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.810968 0.810968 1.62194 3.24387 6.48775 12.9755 25.951 51.902
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.054 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  369.928 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2210+0857_X_dfm.log closed on Mon Jan 14 06:10:15 2019