! Started logfile: /vlbi/uf001/uva//J2208+1808_S_b_dfm.log on Mon Jan 14 06:08:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /vlbi/uf001/uva//J2208+1808_S_b_uva.fits ! Reading UV FITS file: /vlbi/uf001/uva//J2208+1808_S_b_uva.fits ! AN table 1: 58 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.767857 visibilities/baseline/integration-bin. ! Found source: J2208+1808 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 3741 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2208+1808_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014648Jy sigma=21.363887 ! Fit after self-cal, rms=0.887346Jy sigma=18.756835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=9.896 mas, bpa=-10.88 degrees ! Estimated noise=0.707085 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0862543 Jy ! Component: 100 - total flux cleaned = 0.105399 Jy ! Total flux subtracted in 100 components = 0.105399 Jy ! Clean residual min=-0.006287 max=0.009151 Jy/beam ! Clean residual mean=0.000007 rms=0.001897 Jy/beam ! Combined flux in latest and established models = 0.105399 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.105399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073683Jy sigma=1.381807 ! Fit after self-cal, rms=0.073675Jy sigma=1.381686 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.128 mas, bmaj=10.35 mas, bpa=-10.83 degrees ! Estimated noise=0.567669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00900712 Jy ! Component: 100 - total flux cleaned = 0.0110912 Jy ! Component: 150 - total flux cleaned = 0.0121532 Jy ! Component: 200 - total flux cleaned = 0.0125678 Jy ! Total flux subtracted in 200 components = 0.0125678 Jy ! Clean residual min=-0.006283 max=0.006362 Jy/beam ! Clean residual mean=0.000007 rms=0.001720 Jy/beam ! Combined flux in latest and established models = 0.117967 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.117967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.072431Jy sigma=1.359549 ! Fit after self-cal, rms=0.072430Jy sigma=1.359272 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.128 x 10.35 at -10.83 degrees (North through East) ! Clean map min=-0.0060965 max=0.11341 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 HN 1.00 KP 1.02 ! LA 0.95 MK 1.01 NL 1.14 PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.00 KP 1.13 ! LA 1.03 MK 0.92 NL 0.61 PT 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 1.05 KP 1.04 ! LA 0.99 MK 1.00 NL 1.02 PT 1.01 ! ! ! Fit before self-cal, rms=0.072430Jy sigma=1.359272 ! Fit after self-cal, rms=0.063848Jy sigma=1.290009 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.114 mas, bmaj=10.52 mas, bpa=-10.98 degrees ! Estimated noise=0.563977 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173364 Jy ! Component: 100 - total flux cleaned = -0.00194493 Jy ! Component: 150 - total flux cleaned = -0.00194445 Jy ! Component: 200 - total flux cleaned = -0.001946 Jy ! Total flux subtracted in 200 components = -0.001946 Jy ! Clean residual min=-0.005308 max=0.005101 Jy/beam ! Clean residual mean=-0.000006 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.116021 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.116021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063784Jy sigma=1.288774 ! Fit after self-cal, rms=0.064127Jy sigma=1.285773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064127Jy sigma=1.285773 ! Fit after self-cal, rms=0.067859Jy sigma=1.242446 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.107 mas, bmaj=10.42 mas, bpa=-11.31 degrees ! Estimated noise=0.562454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139027 Jy ! Component: 100 - total flux cleaned = 0.00154279 Jy ! Component: 150 - total flux cleaned = 0.00161042 Jy ! Component: 200 - total flux cleaned = 0.00166087 Jy ! Total flux subtracted in 200 components = 0.00166087 Jy ! Clean residual min=-0.001996 max=0.001798 Jy/beam ! Clean residual mean=-0.000002 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.117682 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.117682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.067801Jy sigma=1.241079 ! Fit after self-cal, rms=0.068008Jy sigma=1.240140 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.19162e-05 Jy ! Component: 100 - total flux cleaned = 0.000216584 Jy ! Component: 150 - total flux cleaned = 0.000283117 Jy ! Component: 200 - total flux cleaned = 0.000305742 Jy ! Total flux subtracted in 200 components = 0.000305742 Jy ! Clean residual min=-0.001894 max=0.001933 Jy/beam ! Clean residual mean=-0.000002 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.117988 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.117988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068000Jy sigma=1.239988 ! Fit after self-cal, rms=0.068005Jy sigma=1.239972 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068005Jy sigma=1.239972 ! Fit after self-cal, rms=0.068654Jy sigma=1.239657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.118 mas, bmaj=10.38 mas, bpa=-11.36 degrees ! Estimated noise=0.561812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174783 Jy ! Component: 100 - total flux cleaned = 0.000208084 Jy ! Component: 150 - total flux cleaned = 0.000265962 Jy ! Component: 200 - total flux cleaned = 0.000312508 Jy ! Total flux subtracted in 200 components = 0.000312508 Jy ! Clean residual min=-0.001773 max=0.001719 Jy/beam ! Clean residual mean=-0.000000 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.1183 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.1183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068644Jy sigma=1.239436 ! Fit after self-cal, rms=0.068669Jy sigma=1.239427 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.11648e-05 Jy ! Component: 100 - total flux cleaned = 6.90405e-05 Jy ! Component: 150 - total flux cleaned = 8.48546e-05 Jy ! Component: 200 - total flux cleaned = 9.92764e-05 Jy ! Total flux subtracted in 200 components = 9.92764e-05 Jy ! Clean residual min=-0.001766 max=0.001741 Jy/beam ! Clean residual mean=-0.000000 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.118399 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.118399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068665Jy sigma=1.239405 ! Fit after self-cal, rms=0.068669Jy sigma=1.239402 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068669Jy sigma=1.239402 ! Fit after self-cal, rms=0.068744Jy sigma=1.239298 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=10.61 mas, bpa=-19.64 degrees ! Estimated noise=0.650716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.13681e-05 Jy ! Component: 100 - total flux cleaned = -4.8983e-05 Jy ! Component: 150 - total flux cleaned = -4.10876e-05 Jy ! Component: 200 - total flux cleaned = -4.1377e-05 Jy ! Total flux subtracted in 200 components = -4.1377e-05 Jy ! Clean residual min=-0.002265 max=0.001850 Jy/beam ! Clean residual mean=0.000002 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.118358 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 0.118358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068739Jy sigma=1.239273 ! Fit after self-cal, rms=0.068750Jy sigma=1.239266 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.86118e-05 Jy ! Component: 100 - total flux cleaned = -1.58137e-05 Jy ! Component: 150 - total flux cleaned = -9.64079e-06 Jy ! Component: 200 - total flux cleaned = 1.07492e-06 Jy ! Total flux subtracted in 200 components = 1.07492e-06 Jy ! Clean residual min=-0.002259 max=0.001845 Jy/beam ! Clean residual mean=0.000002 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.118359 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 110 components and 0.118359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068747Jy sigma=1.239257 ! Fit after self-cal, rms=0.068749Jy sigma=1.239256 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=10.36 mas, bpa=-11.39 degrees ! Estimated noise=0.561757 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.134 x 10.36 at -11.39 degrees (North through East) ! Clean map min=-0.0017339 max=0.11279 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=9.968 mas, bpa=-11.3 degrees ! Estimated noise=0.714356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.087001 Jy ! Component: 100 - total flux cleaned = 0.10626 Jy ! Component: 150 - total flux cleaned = 0.112518 Jy ! Component: 200 - total flux cleaned = 0.114372 Jy ! Total flux subtracted in 200 components = 0.114372 Jy ! Clean residual min=-0.002691 max=0.003091 Jy/beam ! Clean residual mean=-0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.114372 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.114372 Jy ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=10.36 mas, bpa=-11.39 degrees ! Estimated noise=0.561757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175016 Jy ! Component: 100 - total flux cleaned = 0.00243053 Jy ! Component: 150 - total flux cleaned = 0.00295493 Jy ! Component: 200 - total flux cleaned = 0.00323593 Jy ! Total flux subtracted in 200 components = 0.00323593 Jy ! Clean residual min=-0.002051 max=0.001838 Jy/beam ! Clean residual mean=-0.000000 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.117608 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 52 components and 0.117608 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=10.61 mas, bpa=-19.64 degrees ! Estimated noise=0.650716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000591424 Jy ! Component: 100 - total flux cleaned = 0.00069936 Jy ! Component: 150 - total flux cleaned = 0.000727832 Jy ! Component: 200 - total flux cleaned = 0.000727297 Jy ! Total flux subtracted in 200 components = 0.000727297 Jy ! Clean residual min=-0.002378 max=0.001845 Jy/beam ! Clean residual mean=0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.118335 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64611e-07 Jy ! Component: 100 - total flux cleaned = 1.159e-05 Jy ! Component: 150 - total flux cleaned = 1.16875e-05 Jy ! Component: 200 - total flux cleaned = 2.23037e-05 Jy ! Total flux subtracted in 200 components = 2.23037e-05 Jy ! Clean residual min=-0.002363 max=0.001828 Jy/beam ! Clean residual mean=0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.118357 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.118357 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.134 mas, bmaj=10.36 mas, bpa=-11.39 degrees ! Estimated noise=0.561757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72265e-05 Jy ! Component: 100 - total flux cleaned = 3.59734e-05 Jy ! Component: 150 - total flux cleaned = 6.38555e-05 Jy ! Component: 200 - total flux cleaned = 7.66211e-05 Jy ! Total flux subtracted in 200 components = 7.66211e-05 Jy ! Clean residual min=-0.001874 max=0.001875 Jy/beam ! Clean residual mean=0.000001 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.118434 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.118434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.068767Jy sigma=1.239381 ! Fit after self-cal, rms=0.068754Jy sigma=1.239322 wmodel J2208+1808_S_b_map.mod ! Writing 79 model components to file: J2208+1808_S_b_map.mod wobs J2208+1808_S_b_uvs.fits ! Writing UV FITS file: J2208+1808_S_b_uvs.fits wwins J2208+1808_S_b_map.win ! wwins: Wrote 1 windows to J2208+1808_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103095 Jy ! Component: 100 - total flux cleaned = 0.000226045 Jy ! Component: 150 - total flux cleaned = 0.000143492 Jy ! Component: 200 - total flux cleaned = 6.59952e-05 Jy ! Component: 250 - total flux cleaned = 4.20415e-05 Jy ! Component: 300 - total flux cleaned = -2.95835e-05 Jy ! Component: 350 - total flux cleaned = -9.7775e-05 Jy ! Component: 400 - total flux cleaned = -0.00018494 Jy ! Component: 450 - total flux cleaned = -0.00026765 Jy ! Component: 500 - total flux cleaned = -0.00036721 Jy ! Component: 550 - total flux cleaned = -0.000483891 Jy ! Component: 600 - total flux cleaned = -0.000652386 Jy ! Component: 650 - total flux cleaned = -0.000761221 Jy ! Component: 700 - total flux cleaned = -0.000849663 Jy ! Component: 750 - total flux cleaned = -0.000936527 Jy ! Component: 800 - total flux cleaned = -0.00100421 Jy ! Component: 850 - total flux cleaned = -0.00103775 Jy ! Component: 900 - total flux cleaned = -0.00107022 Jy ! Component: 950 - total flux cleaned = -0.00108618 Jy ! Component: 1000 - total flux cleaned = -0.00117885 Jy ! Component: 1050 - total flux cleaned = -0.00123957 Jy ! Component: 1100 - total flux cleaned = -0.00137349 Jy ! Component: 1150 - total flux cleaned = -0.00146115 Jy ! Component: 1200 - total flux cleaned = -0.00153319 Jy ! Component: 1250 - total flux cleaned = -0.00161826 Jy ! Component: 1300 - total flux cleaned = -0.00170185 Jy ! Component: 1350 - total flux cleaned = -0.00182484 Jy ! Component: 1400 - total flux cleaned = -0.00189168 Jy ! Component: 1450 - total flux cleaned = -0.00185207 Jy ! Component: 1500 - total flux cleaned = -0.00187828 Jy ! Component: 1550 - total flux cleaned = -0.00189121 Jy ! Component: 1600 - total flux cleaned = -0.0018786 Jy ! Component: 1650 - total flux cleaned = -0.00185362 Jy ! Component: 1700 - total flux cleaned = -0.00187853 Jy ! Component: 1750 - total flux cleaned = -0.0018663 Jy ! Component: 1800 - total flux cleaned = -0.00186617 Jy ! Component: 1850 - total flux cleaned = -0.00189005 Jy ! Component: 1900 - total flux cleaned = -0.00191364 Jy ! Component: 1950 - total flux cleaned = -0.00191359 Jy ! Component: 2000 - total flux cleaned = -0.00191369 Jy ! Component: 2050 - total flux cleaned = -0.00191373 Jy ! Component: 2100 - total flux cleaned = -0.00194794 Jy ! Component: 2150 - total flux cleaned = -0.00198164 Jy ! Component: 2200 - total flux cleaned = -0.00199268 Jy ! Component: 2250 - total flux cleaned = -0.00202572 Jy ! Component: 2300 - total flux cleaned = -0.00205868 Jy ! Component: 2350 - total flux cleaned = -0.00209118 Jy ! Component: 2400 - total flux cleaned = -0.00215573 Jy ! Component: 2450 - total flux cleaned = -0.0021984 Jy ! Component: 2500 - total flux cleaned = -0.00223017 Jy ! Component: 2550 - total flux cleaned = -0.0022617 Jy ! Component: 2600 - total flux cleaned = -0.00229295 Jy ! Component: 2650 - total flux cleaned = -0.00232397 Jy ! Component: 2700 - total flux cleaned = -0.00235477 Jy ! Component: 2750 - total flux cleaned = -0.00239551 Jy ! Component: 2800 - total flux cleaned = -0.00245607 Jy ! Component: 2850 - total flux cleaned = -0.0025062 Jy ! Component: 2900 - total flux cleaned = -0.00253611 Jy ! Component: 2950 - total flux cleaned = -0.00256599 Jy ! Component: 3000 - total flux cleaned = -0.00262505 Jy ! Component: 3050 - total flux cleaned = -0.00269356 Jy ! Component: 3100 - total flux cleaned = -0.00275191 Jy ! Component: 3150 - total flux cleaned = -0.00280031 Jy ! Component: 3200 - total flux cleaned = -0.00285798 Jy ! Component: 3250 - total flux cleaned = -0.00291524 Jy ! Component: 3300 - total flux cleaned = -0.00295324 Jy ! Component: 3350 - total flux cleaned = -0.00300985 Jy ! Component: 3400 - total flux cleaned = -0.00305681 Jy ! Component: 3450 - total flux cleaned = -0.0031035 Jy ! Component: 3500 - total flux cleaned = -0.00317783 Jy ! Component: 3550 - total flux cleaned = -0.00320552 Jy ! Component: 3600 - total flux cleaned = -0.0032423 Jy ! Component: 3650 - total flux cleaned = -0.00326977 Jy ! Component: 3700 - total flux cleaned = -0.00330624 Jy ! Component: 3750 - total flux cleaned = -0.00331542 Jy ! Component: 3800 - total flux cleaned = -0.00335164 Jy ! Component: 3850 - total flux cleaned = -0.00339668 Jy ! Component: 3900 - total flux cleaned = -0.00342359 Jy ! Component: 3950 - total flux cleaned = -0.00346821 Jy ! Component: 4000 - total flux cleaned = -0.00348606 Jy ! Component: 4050 - total flux cleaned = -0.00351269 Jy ! Total flux subtracted in 4096 components = -0.00353924 Jy ! Clean residual min=-0.000569 max=0.000488 Jy/beam ! Clean residual mean=-0.000001 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.114895 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 355 components and 0.114895 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/uf001/uva//J2208+1808_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.134 x 10.36 at -11.39 degrees (North through East) ! Clean map min=-0.0013647 max=0.11258 Jy/beam ! Writing clean map to FITS file: /vlbi/uf001/uva//J2208+1808_S_b_map.fits wmodel /vlbi/uf001/uva//J2208+1808_S_b_map.mod ! Writing 355 model components to file: /vlbi/uf001/uva//J2208+1808_S_b_map.mod wobs /vlbi/uf001/uva//J2208+1808_S_b_uvs.fits ! Writing UV FITS file: /vlbi/uf001/uva//J2208+1808_S_b_uvs.fits wwins /vlbi/uf001/uva//J2208+1808_S_b_map.win ! wwins: Wrote 2 windows to /vlbi/uf001/uva//J2208+1808_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.112582 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151016 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.402413 0.402413 0.804827 1.60965 3.21931 6.43861 12.8772 25.7544 51.5089 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.112 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 745.502 quit ! Quitting program ! Log file /vlbi/uf001/uva//J2208+1808_S_b_dfm.log closed on Mon Jan 14 06:08:44 2019