! Started logfile: /vlbi/uf001/uva//J2206-1835_S_b_dfm.log on Mon Jan 14 06:08:05 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/uf001/uva//J2206-1835_S_b_uva.fits
! Reading UV FITS file: /vlbi/uf001/uva//J2206-1835_S_b_uva.fits
! AN table 1: 148 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.791479 visibilities/baseline/integration-bin.
! Found source: J2206-1835
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 12651 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2206-1835_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 180 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.360656Jy  sigma=17.035980
! Fit after  self-cal, rms=0.972337Jy  sigma=13.487427
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.623 mas, bmaj=13.36 mas, bpa=-19.07 degrees
! Estimated noise=0.797555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.192711 Jy
! Component: 100  -  total flux cleaned = 0.323674 Jy
! Total flux subtracted in 100 components = 0.323674 Jy
! Clean residual min=-0.051450 max=0.083228 Jy/beam
! Clean residual mean=0.000501 rms=0.017661 Jy/beam
! Combined flux in latest and established models = 0.323674 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.323674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.842285Jy  sigma=6.654197
! Fit after  self-cal, rms=0.841311Jy  sigma=6.633599
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.361 mas, bmaj=15.32 mas, bpa=-18.55 degrees
! Estimated noise=0.432108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.225161 Jy
! Component: 100  -  total flux cleaned = 0.374228 Jy
! Component: 150  -  total flux cleaned = 0.48346 Jy
! Component: 200  -  total flux cleaned = 0.565459 Jy
! Total flux subtracted in 200 components = 0.565459 Jy
! Clean residual min=-0.086572 max=0.146044 Jy/beam
! Clean residual mean=0.000730 rms=0.035719 Jy/beam
! Combined flux in latest and established models = 0.889133 Jy
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 139 components and 0.889133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.679460Jy  sigma=5.454972
! Fit after  self-cal, rms=0.678189Jy  sigma=5.430902
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.361 x 15.32 at -18.55 degrees (North through East)
! Clean map  min=-0.088031  max=0.24784 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.88     FD        0.78     HN        4.50     KP        1.02     
!   LA        0.66     MK        2.36     NL        2.57     OV        2.00     
!   PT        0.63     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.38     FD        0.79     HN        3.83     KP        0.95     
!   LA        0.68     MK        2.45     NL        2.56     OV        1.87     
!   PT        0.62     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.22     FD        0.84     HN        4.84     KP        1.15     
!   LA        0.59     MK        2.88     NL        2.99     OV        2.47     
!   PT        0.56     
! 
! 
! Fit before self-cal, rms=0.678189Jy  sigma=5.430902
! Fit after  self-cal, rms=0.783798Jy  sigma=4.031359
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.563 mas, bmaj=18.19 mas, bpa=-17.54 degrees
! Estimated noise=0.707045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0487289 Jy
! Component: 100  -  total flux cleaned = 0.0636632 Jy
! Component: 150  -  total flux cleaned = 0.0683008 Jy
! Component: 200  -  total flux cleaned = 0.0714615 Jy
! Total flux subtracted in 200 components = 0.0714615 Jy
! Clean residual min=-0.104608 max=0.175242 Jy/beam
! Clean residual mean=0.000287 rms=0.041475 Jy/beam
! Combined flux in latest and established models = 0.960595 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 161 components and 0.960595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.772279Jy  sigma=4.060489
! Fit after  self-cal, rms=0.779553Jy  sigma=3.994893
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.779553Jy  sigma=3.994893
! Fit after  self-cal, rms=1.118508Jy  sigma=3.585646
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.923 mas, bmaj=17.03 mas, bpa=-20.07 degrees
! Estimated noise=0.716448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527589 Jy
! Component: 100  -  total flux cleaned = 0.0572654 Jy
! Component: 150  -  total flux cleaned = 0.0573017 Jy
! Component: 200  -  total flux cleaned = 0.0557616 Jy
! Total flux subtracted in 200 components = 0.0557616 Jy
! Clean residual min=-0.092701 max=0.164257 Jy/beam
! Clean residual mean=-0.000105 rms=0.036547 Jy/beam
! Combined flux in latest and established models = 1.01636 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 173 components and 1.01636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.104005Jy  sigma=3.622508
! Fit after  self-cal, rms=1.106097Jy  sigma=3.616808
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (58.5, -35.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.14999 Jy
! Component: 100  -  total flux cleaned = 0.208888 Jy
! Component: 150  -  total flux cleaned = 0.229144 Jy
! Component: 200  -  total flux cleaned = 0.234419 Jy
! Total flux subtracted in 200 components = 0.234419 Jy
! Clean residual min=-0.099180 max=0.121372 Jy/beam
! Clean residual mean=-0.000628 rms=0.032328 Jy/beam
! Combined flux in latest and established models = 1.25078 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 217 components and 1.25078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.046878Jy  sigma=3.487541
! Fit after  self-cal, rms=1.044868Jy  sigma=3.397701
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=1.044868Jy  sigma=3.397701
! Fit after  self-cal, rms=0.725982Jy  sigma=3.217371
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.099 mas, bmaj=17.32 mas, bpa=-19.27 degrees
! Estimated noise=0.721671 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527742 Jy
! Component: 100  -  total flux cleaned = 0.088344 Jy
! Component: 150  -  total flux cleaned = 0.107412 Jy
! Component: 200  -  total flux cleaned = 0.114046 Jy
! Total flux subtracted in 200 components = 0.114046 Jy
! Clean residual min=-0.083352 max=0.110648 Jy/beam
! Clean residual mean=-0.000559 rms=0.030659 Jy/beam
! Combined flux in latest and established models = 1.36482 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 266 components and 1.36482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.711769Jy  sigma=3.213176
! Fit after  self-cal, rms=0.710298Jy  sigma=3.203903
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017645 Jy
! Component: 100  -  total flux cleaned = 0.0215853 Jy
! Component: 150  -  total flux cleaned = 0.0230074 Jy
! Component: 200  -  total flux cleaned = 0.0236495 Jy
! Total flux subtracted in 200 components = 0.0236495 Jy
! Clean residual min=-0.084879 max=0.113428 Jy/beam
! Clean residual mean=-0.000622 rms=0.030753 Jy/beam
! Combined flux in latest and established models = 1.38847 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 297 components and 1.38847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.705039Jy  sigma=3.214421
! Fit after  self-cal, rms=0.704994Jy  sigma=3.213467
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.704994Jy  sigma=3.213467
! Fit after  self-cal, rms=0.694238Jy  sigma=3.184206
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.53 mas, bmaj=23.67 mas, bpa=-9.49 degrees
! Estimated noise=0.781886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0447117 Jy
! Component: 100  -  total flux cleaned = 0.0727691 Jy
! Component: 150  -  total flux cleaned = 0.0855149 Jy
! Component: 200  -  total flux cleaned = 0.0877194 Jy
! Total flux subtracted in 200 components = 0.0877194 Jy
! Clean residual min=-0.115678 max=0.152529 Jy/beam
! Clean residual mean=-0.000950 rms=0.044194 Jy/beam
! Combined flux in latest and established models = 1.47619 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 317 components and 1.47619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.688834Jy  sigma=3.199334
! Fit after  self-cal, rms=0.689486Jy  sigma=3.193686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0039326 Jy
! Component: 100  -  total flux cleaned = 0.00462364 Jy
! Component: 150  -  total flux cleaned = 0.00460259 Jy
! Component: 200  -  total flux cleaned = 0.00396376 Jy
! Total flux subtracted in 200 components = 0.00396376 Jy
! Clean residual min=-0.114219 max=0.151766 Jy/beam
! Clean residual mean=-0.000965 rms=0.044010 Jy/beam
! Combined flux in latest and established models = 1.48015 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 323 components and 1.48015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.689189Jy  sigma=3.187770
! Fit after  self-cal, rms=0.689313Jy  sigma=3.186465
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.144 mas, bmaj=17.46 mas, bpa=-19.13 degrees
! Estimated noise=0.746003 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.144 x 17.46 at -19.13 degrees (North through East)
! Clean map  min=-0.086341  max=0.41724 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.961 mas, bmaj=14.28 mas, bpa=-19.3 degrees
! Estimated noise=1.72807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.382651 Jy
! Component: 100  -  total flux cleaned = 0.59765 Jy
! Component: 150  -  total flux cleaned = 0.745561 Jy
! Component: 200  -  total flux cleaned = 0.863607 Jy
! Total flux subtracted in 200 components = 0.863607 Jy
! Clean residual min=-0.077657 max=0.094155 Jy/beam
! Clean residual mean=0.000253 rms=0.026340 Jy/beam
! Combined flux in latest and established models = 0.863606 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 69 model components to the UV plane model.
! The established model now contains 69 components and 0.863606 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.144 mas, bmaj=17.46 mas, bpa=-19.13 degrees
! Estimated noise=0.746003 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.152973 Jy
! Component: 100  -  total flux cleaned = 0.262229 Jy
! Component: 150  -  total flux cleaned = 0.342772 Jy
! Component: 200  -  total flux cleaned = 0.404196 Jy
! Total flux subtracted in 200 components = 0.404196 Jy
! Clean residual min=-0.094135 max=0.114235 Jy/beam
! Clean residual mean=-0.000215 rms=0.033549 Jy/beam
! Combined flux in latest and established models = 1.2678 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 147 components and 1.2678 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.53 mas, bmaj=23.67 mas, bpa=-9.49 degrees
! Estimated noise=0.781886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0707432 Jy
! Component: 100  -  total flux cleaned = 0.109276 Jy
! Component: 150  -  total flux cleaned = 0.130388 Jy
! Component: 200  -  total flux cleaned = 0.145541 Jy
! Total flux subtracted in 200 components = 0.145541 Jy
! Clean residual min=-0.118444 max=0.155360 Jy/beam
! Clean residual mean=-0.000754 rms=0.045245 Jy/beam
! Combined flux in latest and established models = 1.41334 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0071721 Jy
! Component: 100  -  total flux cleaned = 0.0144452 Jy
! Component: 150  -  total flux cleaned = 0.019847 Jy
! Component: 200  -  total flux cleaned = 0.0246031 Jy
! Total flux subtracted in 200 components = 0.0246031 Jy
! Clean residual min=-0.117454 max=0.152433 Jy/beam
! Clean residual mean=-0.000871 rms=0.044966 Jy/beam
! Combined flux in latest and established models = 1.43795 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 200 components and 1.43795 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.144 mas, bmaj=17.46 mas, bpa=-19.13 degrees
! Estimated noise=0.746003 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00976529 Jy
! Component: 100  -  total flux cleaned = -0.0129484 Jy
! Component: 150  -  total flux cleaned = -0.0136339 Jy
! Component: 200  -  total flux cleaned = -0.0136418 Jy
! Total flux subtracted in 200 components = -0.0136418 Jy
! Clean residual min=-0.088409 max=0.109901 Jy/beam
! Clean residual mean=-0.000598 rms=0.031790 Jy/beam
! Combined flux in latest and established models = 1.42431 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 221 components and 1.42431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.692404Jy  sigma=3.218122
! Fit after  self-cal, rms=0.690690Jy  sigma=3.213413
wmodel J2206-1835_S_b_map.mod
! Writing 221 model components to file: J2206-1835_S_b_map.mod
wobs   J2206-1835_S_b_uvs.fits
! Writing UV FITS file: J2206-1835_S_b_uvs.fits
wwins  J2206-1835_S_b_map.win
! wwins: Wrote 2 windows to J2206-1835_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0497631 Jy
! Component: 100  -  total flux cleaned = 0.0829961 Jy
! Component: 150  -  total flux cleaned = 0.111463 Jy
! Component: 200  -  total flux cleaned = 0.134846 Jy
! Component: 250  -  total flux cleaned = 0.152567 Jy
! Component: 300  -  total flux cleaned = 0.16536 Jy
! Component: 350  -  total flux cleaned = 0.173854 Jy
! Component: 400  -  total flux cleaned = 0.179658 Jy
! Component: 450  -  total flux cleaned = 0.181902 Jy
! Component: 500  -  total flux cleaned = 0.183016 Jy
! Component: 550  -  total flux cleaned = 0.18196 Jy
! Component: 600  -  total flux cleaned = 0.17893 Jy
! Component: 650  -  total flux cleaned = 0.176972 Jy
! Component: 700  -  total flux cleaned = 0.176027 Jy
! Component: 750  -  total flux cleaned = 0.175092 Jy
! Component: 800  -  total flux cleaned = 0.175992 Jy
! Component: 850  -  total flux cleaned = 0.174217 Jy
! Component: 900  -  total flux cleaned = 0.173359 Jy
! Component: 950  -  total flux cleaned = 0.172525 Jy
! Component: 1000  -  total flux cleaned = 0.173348 Jy
! Component: 1050  -  total flux cleaned = 0.171708 Jy
! Component: 1100  -  total flux cleaned = 0.169337 Jy
! Component: 1150  -  total flux cleaned = 0.16625 Jy
! Component: 1200  -  total flux cleaned = 0.167006 Jy
! Component: 1250  -  total flux cleaned = 0.166247 Jy
! Component: 1300  -  total flux cleaned = 0.162608 Jy
! Component: 1350  -  total flux cleaned = 0.161907 Jy
! Component: 1400  -  total flux cleaned = 0.159811 Jy
! Component: 1450  -  total flux cleaned = 0.157744 Jy
! Component: 1500  -  total flux cleaned = 0.154335 Jy
! Component: 1550  -  total flux cleaned = 0.151651 Jy
! Component: 1600  -  total flux cleaned = 0.149662 Jy
! Component: 1650  -  total flux cleaned = 0.145727 Jy
! Component: 1700  -  total flux cleaned = 0.141835 Jy
! Component: 1750  -  total flux cleaned = 0.137992 Jy
! Component: 1800  -  total flux cleaned = 0.134815 Jy
! Component: 1850  -  total flux cleaned = 0.129779 Jy
! Component: 1900  -  total flux cleaned = 0.126671 Jy
! Component: 1950  -  total flux cleaned = 0.122967 Jy
! Component: 2000  -  total flux cleaned = 0.118692 Jy
! Component: 2050  -  total flux cleaned = 0.113844 Jy
! Component: 2100  -  total flux cleaned = 0.110839 Jy
! Component: 2150  -  total flux cleaned = 0.107268 Jy
! Component: 2200  -  total flux cleaned = 0.102539 Jy
! Component: 2250  -  total flux cleaned = 0.0990175 Jy
! Component: 2300  -  total flux cleaned = 0.0943521 Jy
! Component: 2350  -  total flux cleaned = 0.0891337 Jy
! Component: 2400  -  total flux cleaned = 0.0868311 Jy
! Component: 2450  -  total flux cleaned = 0.0822445 Jy
! Component: 2500  -  total flux cleaned = 0.077109 Jy
! Component: 2550  -  total flux cleaned = 0.071997 Jy
! Component: 2600  -  total flux cleaned = 0.0657593 Jy
! Component: 2650  -  total flux cleaned = 0.060097 Jy
! Component: 2700  -  total flux cleaned = 0.055007 Jy
! Component: 2750  -  total flux cleaned = 0.0482361 Jy
! Component: 2800  -  total flux cleaned = 0.0431661 Jy
! Component: 2850  -  total flux cleaned = 0.0369784 Jy
! Component: 2900  -  total flux cleaned = 0.0319244 Jy
! Component: 2950  -  total flux cleaned = 0.0263127 Jy
! Component: 3000  -  total flux cleaned = 0.0212703 Jy
! Component: 3050  -  total flux cleaned = 0.0162335 Jy
! Component: 3100  -  total flux cleaned = 0.0100749 Jy
! Component: 3150  -  total flux cleaned = 0.00560268 Jy
! Component: 3200  -  total flux cleaned = 0.000572693 Jy
! Component: 3250  -  total flux cleaned = -0.00501558 Jy
! Component: 3300  -  total flux cleaned = -0.0100437 Jy
! Component: 3350  -  total flux cleaned = -0.0150672 Jy
! Component: 3400  -  total flux cleaned = -0.020649 Jy
! Component: 3450  -  total flux cleaned = -0.0256758 Jy
! Component: 3500  -  total flux cleaned = -0.0301488 Jy
! Component: 3550  -  total flux cleaned = -0.0340641 Jy
! Component: 3600  -  total flux cleaned = -0.0385375 Jy
! Component: 3650  -  total flux cleaned = -0.0419039 Jy
! Component: 3700  -  total flux cleaned = -0.0452789 Jy
! Component: 3750  -  total flux cleaned = -0.0492245 Jy
! Component: 3800  -  total flux cleaned = -0.05318 Jy
! Component: 3850  -  total flux cleaned = -0.0565849 Jy
! Component: 3900  -  total flux cleaned = -0.0588615 Jy
! Component: 3950  -  total flux cleaned = -0.0617135 Jy
! Component: 4000  -  total flux cleaned = -0.0645757 Jy
! Component: 4050  -  total flux cleaned = -0.0680319 Jy
! Total flux subtracted in 4096 components = -0.070926 Jy
! Clean residual min=-0.033769 max=0.032092 Jy/beam
! Clean residual mean=-0.000288 rms=0.012336 Jy/beam
! Combined flux in latest and established models = 1.35338 Jy
keep
! Adding 579 model components to the UV plane model.
! The established model now contains 800 components and 1.35338 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/uf001/uva//J2206-1835_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.144 x 17.46 at -19.13 degrees (North through East)
! Clean map  min=-0.076994  max=0.45346 Jy/beam
! Writing clean map to FITS file: /vlbi/uf001/uva//J2206-1835_S_b_map.fits
wmodel /vlbi/uf001/uva//J2206-1835_S_b_map.mod
! Writing 800 model components to file: /vlbi/uf001/uva//J2206-1835_S_b_map.mod
wobs   /vlbi/uf001/uva//J2206-1835_S_b_uvs.fits
! Writing UV FITS file: /vlbi/uf001/uva//J2206-1835_S_b_uvs.fits
wwins  /vlbi/uf001/uva//J2206-1835_S_b_map.win
! wwins: Wrote 3 windows to /vlbi/uf001/uva//J2206-1835_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.45346 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0120883 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -7.99735 7.99735 15.9947 31.9894 63.9788
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0362 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.453 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  37.512 
quit
! Quitting program
! Log file /vlbi/uf001/uva//J2206-1835_S_b_dfm.log closed on Mon Jan 14 06:08:10 2019